RESUMO
STATEMENT OF PROBLEM: The osseointegration or fibrous encapsulation of immediately loaded dental implants depends largely on the extent of implant micromovement. The impact of acrylic resin or metal-reinforced acrylic resin provisional restorations on this movement is currently unknown. PURPOSE: The purpose of this study was to isolate and measure the effect of provisional restoration type on the vertical displacement of adjacent implants under load at 2 locations. MATERIAL AND METHODS: Vertical loads ranging from 10-200 N were applied to polymethyl methacrylate resin (n=56) or metal-reinforced acrylic resin provisional restorations (n=56) supported by 4 implants inserted into homogenous artificial bone in a "u-shaped" alignment. Provisional restorations were first loaded in the anterior segment where the provisional restoration was supported by a mesial and distal implant, followed by loading on an extension 8 mm distal to the last implant. Vertical displacement of the 2 implants nearest the load application was measured and recorded using an optical image correlation technique based on photogrammetric principles. Data were subjected to a nonparametric multivariate analysis (generalized Wilcoxon test) and a Mann-Whitney test with a 2-tailed P value (alpha=.05). RESULTS: There was no significant difference in the vertical implant displacement of the 2 provisional restoration groups when they were loaded in the anterior segment. However, when loads were applied to the distal cantilever, metal reinforcement resulted in less vertical displacement of the next-to-last implant. The mean vertical displacement of the next-to-last implant when supporting an acrylic resin provisional restoration increased from 20 microm +/-3 microm (pooled loads of 10-50 N) to 130 microm +/-21 microm (pooled loads of 160-200 N), while the vertical displacement of the implant when retaining a metal-reinforced acrylic resin provisional restoration increased from 10 microm +/-2 microm to 69 microm +/-13 microm under the same loads (PAssuntos
Implantes Dentários
, Materiais Dentários/química
, Planejamento de Prótese Dentária
, Prótese Dentária Fixada por Implante
, Fenômenos Biomecânicos
, Ligas de Cromo/química
, Cobalto/química
, Dente Suporte
, Ligas Dentárias/química
, Arco Dental/fisiopatologia
, Humanos
, Mandíbula/fisiopatologia
, Teste de Materiais
, Modelos Anatômicos
, Movimento
, Níquel/química
, Fotogrametria
, Polimetil Metacrilato/química
, Poliuretanos/química
, Estresse Mecânico
RESUMO
The rehabilitation of a child's dentition with a removable prosthesis is more complex and time consuming, when comparing it to the one of adults. Prerequisite for a successful treatment is a careful consideration of age-related, technical, functional and psychological aspects. The aesthetic and functional replacement of the missing teeth using a removable prosthesis results in an increased self-esteem for the young patients. This case report describes the management of a young child as well as the treatment planning and the prosthetic rehabilitation process.
Assuntos
Anodontia/reabilitação , Planejamento de Dentadura , Prótese Parcial Removível , Pré-Escolar , Deglutição , Retenção de Dentadura/métodos , Humanos , Masculino , Cooperação do Paciente , Autoimagem , Fala , Dente DecíduoRESUMO
The fabrication of a prosthesis for a child requires an extensive diagnostic process together with a detailed medical and dental history. The treatment modalities for children and adults are different. By young patients attention must be paid in order to establish a feeling of trust and close cooperation between the dentist and the patient. The aim of the treatment with removable denture prosthesis is the re-establishment of aesthetic, phonetic and function while assuring at the same time a high standard of oral hygiene and periodontal maintenance. The continuous jaw growth and the dentition changes of a child must be closely monitored. Therefore, frequent (3-6 months recall intervals) follow-up examinations and denture adjustments are needed.
Assuntos
Assistência Odontológica para Crianças , Prótese Parcial Removível , Acidentes por Quedas , Criança , Pré-Escolar , Assistência Odontológica para Crianças/psicologia , Cárie Dentária/complicações , Relações Dentista-Paciente , Humanos , Desenvolvimento Maxilofacial , Neoplasias Bucais/complicações , Higiene Bucal , Planejamento de Assistência ao Paciente , Radiografia Dentária , Distúrbios da Fala/prevenção & controle , Perda de Dente/etiologia , Perda de Dente/terapia , Dente DecíduoRESUMO
OBJECTIVE: The objective of this study was to investigate the applicability of micro-analytical methods with high spatial resolution to the characterization of the composition and corrosion behavior of two bracket systems. MATERIAL AND METHODS: The surfaces of six nickel-free brackets and six nickel-containing brackets were examined for signs of corrosion and qualitative surface analysis using an electron probe microanalyzer (EPMA), prior to bonding to patient's tooth surfaces and four months after clinical use. The surfaces were characterized qualitatively by secondary electron (SE) images and back scattered electron (BSE) images in both compositional and topographical mode. Qualitative and quantitative wavelength-dispersive analyses were performed for different elements, and by utilizing qualitative analysis the relative concentration of selected elements was mapped two-dimensionally. The absolute concentration of the elements was determined in specially prepared brackets by quantitative analysis using pure element standards for calibration and calculating correction-factors (ZAF). RESULTS: Clear differences were observed between the different bracket types. The nickel-containing stainless steel brackets consist of two separate pieces joined by a brazing alloy. Compositional analysis revealed two different alloy compositions, and reaction zones on both sides of the brazing alloy. The nickel-free bracket was a single piece with only slight variation in element concentration, but had a significantly rougher surface. After clinical use, no corrosive phenomena were detectable with the methods applied. Traces of intraoral wear at the contact areas between the bracket slot and the arch wire were verified. CONCLUSION: Electron probe microanalysis is a valuable tool for the characterization of element distribution and quantitative analysis for corrosion studies.
Assuntos
Materiais Dentários/química , Microanálise por Sonda Eletrônica/métodos , Níquel/química , Braquetes Ortodônticos , Aço Inoxidável/química , Adolescente , Corrosão , Humanos , Teste de Materiais , Reprodutibilidade dos Testes , Propriedades de Superfície , Fatores de TempoRESUMO
OBJECTIVE: Primary stability and micromovement of orthodontic mini-implants depends on a number of factors and influences clinical success or failure. The purpose of this study was to assess the behavior of orthodontic mini-implants upon initial load application. METHOD AND MATERIALS: Orthodontic mini-implants (n = 39) were inserted in the alveolar process of maxillary human cadaver specimens (n = 10). Increasing horizontal forces (up to 2.5 N) were applied, and triggered images were taken in 0.5-N load intervals. Additionally, peri-implant parameters based on micro-CT volume data were recorded. Data were subjected to a two-sided nonparametric Wilcoxon signed rank test, and between-group comparisons were assessed with a Mann-Whitney test (alpha = .05). RESULTS: Initial load application led to displacement beyond elastic recovery of the surrounding bone after force release (P < .001). Cortical thickness and insertion depth, despite numeric differences, did not reveal any statistical differences, while displacement of mini-implants was significantly affected by contact to neighboring teeth (P < .001). CONCLUSIONS: Insertion technique and initial load application on orthodontic mini-implants may be regarded as two crucial factors for success, while repeated application of orthodontic force does not seem to increase screw mobility.
Assuntos
Implantação Dentária Endóssea/métodos , Implantes Dentários , Análise do Estresse Dentário , Procedimentos de Ancoragem Ortodôntica/instrumentação , Densidade Óssea , Parafusos Ósseos , Cadáver , Elasticidade , Falha de Equipamento , Humanos , Maxila/diagnóstico por imagem , Maxila/cirurgia , Miniaturização , Desenho de Aparelho Ortodôntico , Fotogrametria , Estatísticas não Paramétricas , Estresse Mecânico , Técnicas de Movimentação Dentária , Torque , Microtomografia por Raio-XRESUMO
Cherubism is an autosomal-dominant syndrome characterized by bilateral maxillomandibular bony degeneration, fibrous connective tissue hyperplasia, and displacement of permanent tooth germs. Reossification of the cystic lumen occurs spontaneously, but dislocated teeth must be realigned orthodontically. Advancements in virtual 3D reconstruction of anatomic structures based on computed tomography (CT) or cone beam CT data have provided for more predictable individual treatment planning. We evaluated two software programs for making densitometry and volume measurements of cystic areas in the mandibles, and for 3D visualization of permanent tooth germs within the cystic lumen, in two siblings with cherubism.
Assuntos
Querubismo/diagnóstico por imagem , Processamento de Imagem Assistida por Computador/métodos , Imageamento Tridimensional/métodos , Software , Tomografia Computadorizada por Raios X/métodos , Absorciometria de Fóton , Densidade Óssea , Querubismo/genética , Criança , Tomografia Computadorizada de Feixe Cônico/métodos , Feminino , Humanos , Masculino , Mandíbula/diagnóstico por imagem , Planejamento de Assistência ao Paciente , Germe de Dente/diagnóstico por imagem , Interface Usuário-ComputadorRESUMO
We prospectively evaluated the incidence of blood transfusion in 105 consecutively treated patients (45 men and 60 women) having bimaxillary orthognathic operations, to find out whether type and screen testing are adequate in clinical practice. All patients had Le Fort I osteotomy combined with bilateral sagittal split osteotomy of the ramus. The preoperative routine was restricted to type and screen testing and verification of ABO/Rhesus (Rh) status. Autologous blood donation or routine cross-matching of allogeneic units of blood was not done. Intraoperative haemoglobin concentrations and the need for blood transfusion in patients having bimaxillary osteotomies were recorded in a prospective database. The mean duration of operation was 196 min (range 115-325). The median length of hospital stay was 8 days (range 4-16). The mean (SD) reduction in haemoglobin during operation was 34 (16)g/L in men and 32 (10)g/L in women (p=0.32). No patients had an allogeneic blood transfusion. We found that type and screen testing and verification of ABO/Rh status seems to be an adequate precaution to manage blood loss. As reflected by the low rate of transfusion in the present study, severe haemorrhage that requires transfusion of allogeneic blood has become the exception rather than the rule in bimaxillary orthognathic operations.
Assuntos
Tipagem e Reações Cruzadas Sanguíneas/estatística & dados numéricos , Transfusão de Sangue/estatística & dados numéricos , Procedimentos Cirúrgicos Ortognáticos/estatística & dados numéricos , Sistema ABO de Grupos Sanguíneos/análise , Perda Sanguínea Cirúrgica , Feminino , Seguimentos , Hematócrito , Hemoglobinas/análise , Hospitalização , Humanos , Cuidados Intraoperatórios , Tempo de Internação , Masculino , Má Oclusão/cirurgia , Mandíbula/cirurgia , Maxila/cirurgia , Osteotomia/estatística & dados numéricos , Osteotomia de Le Fort/estatística & dados numéricos , Estudos Prospectivos , Sistema do Grupo Sanguíneo Rh-Hr/análise , Síndromes da Apneia do Sono/cirurgia , Fatores de TempoRESUMO
Hypodontia is often found during orthodontic screening and occurs with a prevalence of between 5% and 10%. One or more congenitally missing permanent teeth is a clinical finding that affects both male and female patients. Although maintaining deciduous teeth is an option in a few cases, the majority of patients with agenesis of teeth require extraction and orthodontic space closure or restorative treatment. Depending on the number and location of missing teeth, implant-supported fixed single-tooth restorations provide excellent long-term results. Choosing appropriate treatment techniques and materials will result in long-term clinical function, stability, and esthetic success.
Assuntos
Anodontia/terapia , Implantes Dentários para Um Único Dente , Prótese Dentária Fixada por Implante , Criança , Coroas , Dente Suporte , Implantação Dentária Endóssea , Porcelana Dentária , Feminino , Humanos , Mantenedor de Espaço em Ortodontia , ZircônioRESUMO
OBJECTIVE: The objective of this study was to investigate the applicability of micro-analytical methods with high spatial resolution to the characterization of the composition and corrosion behavior of two bracket systems. MATERIAL AND METHODS: The surfaces of six nickel-free brackets and six nickel-containing brackets were examined for signs of corrosion and qualitative surface analysis using an electron probe microanalyzer (EPMA), prior to bonding to patient's tooth surfaces and four months after clinical use. The surfaces were characterized qualitatively by secondary electron (SE) images and back scattered electron (BSE) images in both compositional and topographical mode. Qualitative and quantitative wavelength-dispersive analyses were performed for different elements, and by utilizing qualitative analysis the relative concentration of selected elements was mapped two-dimensionally. The absolute concentration of the elements was determined in specially prepared brackets by quantitative analysis using pure element standards for calibration and calculating correction-factors (ZAF). RESULTS: Clear differences were observed between the different bracket types. The nickel-containing stainless steel brackets consist of two separate pieces joined by a brazing alloy. Compositional analysis revealed two different alloy compositions, and reaction zones on both sides of the brazing alloy. The nickel-free bracket was a single piece with only slight variation in element concentration, but had a significantly rougher surface. After clinical use, no corrosive phenomena were detectable with the methods applied. Traces of intraoral wear at the contact areas between the bracket slot and the arch wire were verified. CONCLUSION: Electron probe microanalysis is a valuable tool for the characterization of element distribution and quantitative analysis for corrosion studies.