Degradable Cell-Adhesive Hybrid Hydrogels by Cross-Linking of Gelatin with Poly(2-isopropenyl-2-oxazoline).

This study focused on the cross-linking of poly(2-isopropenyl-2-oxazoline) (PiPOx) with gelatin to obtain strong, degradable hybrid hydrogels with good cell adhesion. The molecular weight and concentration of PiPOx and the PiPOx-to-gelatin ratio were varied to adjust the mechanical and swelling properties of the hybrid hydrogels. The swelling degree of PiPOx-gelatin hydrogels in water ranged between 1260 and 810%, with the corresponding Young's compressive moduli ranging from 77 to 215 kPa. Rheological measurements demonstrated the mechanical stability of the hydrogels. The hydrogels exhibited substantial degradation in Dulbecco's phosphate-buffered saline (DPBS) and cell culture medium within several weeks, indicating their degradability and responsiveness. The cell adhesion assay with primary human foreskin fibroblasts revealed the hybrid hydrogels are noncytotoxic and support cell attachment and proliferation. These strong hydrogels thus show excellent potential as biomedical cell scaffolds, combining the tunability and strength of PiPOx hydrogels with gelatin's cell-interactive properties while the ester-containing cross-links provide tunable degradability.

Multifunctional Poly(2-ethyl-2-oxazoline) Copolymers Containing Dithiolane and Pentafluorophenyl Esters as Effective Reactive Linkers for Gold Surface Coatings.

Surface functionalization with biological macromolecules is an important task for the development of sensor materials, whereby the interaction with other biological materials should be suppressed. In this work, we developed a novel multifunctional poly(2-ethyl-2-oxazoline)-dithiolane conjugate as a versatile linker for gold surface immobilization of amine-containing biomolecules, containing poly(2-ethyl-2-oxazoline) as antifouling polymer, dithiolane for surface immobilization, and activated esters for protein conjugation. First, a well-defined carboxylic acid containing copoly(2-ethyl-2-oxazoline) was synthesized by cationic ring-opening copolymerization of 2-ethyl-2-oxazoline with a methyl ester-containing 2-oxazoline monomer, followed by postpolymerization modifications. The side-chain carboxylic groups were then converted to amine-reactive pentafluorophenyl (PFP) ester groups. Part of the PFP groups was used for the attachment of the dithiolane moiety, which can efficiently bind to gold surfaces. The final copolymer contained 1.4 mol% of dithiolane groups and 4.5 mol% of PFP groups. The copolymer structure was confirmed by several analytical techniques, including NMR spectroscopy and size-exclusion chromatography. The kinetics of the PFP ester aminolysis and hydrolysis demonstrated significantly faster amidation compared to hydrolysis, which is essential for subsequent protein conjugation. Successful coating of gold surfaces with the polymer was confirmed by spectroscopic ellipsometry, showing a polymer brush thickness of 4.77 nm. Subsequent modification of the coated surfaces was achieved using bovine serum albumin as a model protein. This study introduces a novel reactive polymer linker for gold surface functionalization and offers a versatile polymer platform for various applications including biosensing and surface functionalization.

Influence of Chain Length of Gradient and Block Copoly(2-oxazoline)s on Self-Assembly and Drug Encapsulation.

Amphiphilic gradient copolymers represent a promising alternative to extensively used block copolymers due to their facile one-step synthesis by statistical copolymerization of monomers of different reactivity. Herein, an in-depth analysis is provided of micelles based on amphiphilic gradient poly(2-oxazoline)s with different chain lengths to evaluate their potential for micellar drug delivery systems and compare them to the analogous diblock copolymer micelles. Size, morphology, and stability of self-assembled nanoparticles, loading of hydrophobic drug curcumin, as well as cytotoxicities of the prepared nanoformulations are examined using copoly(2-oxazoline)s with varying chain lengths and comonomer ratios. In addition to several interesting differences between the two copolymer architecture classes, such as more compact self-assembled structures with faster exchange dynamics for the gradient copolymers, it is concluded that gradient copolymers provide stable curcumin nanoformulations with comparable drug loadings to block copolymer systems and benefit from more straightforward copolymer synthesis. The study demonstrates the potential of amphiphilic gradient copolymers as a versatile platform for the synthesis of new polymer therapeutics.

Linear Poly(ethylenimine-propylenimine) Random Copolymers for Gene Delivery: From Polymer Synthesis to Efficient Transfection with High Serum Tolerance.

Naturally occurring oligoamines, such as spermine, spermidine, and putrescine, are well-known regulators of gene expression. These oligoamines frequently have short alkyl spacers with varying lengths between the amines. Linear polyethylenimine (PEI) is a polyamine that has been widely applied as a gene vector, with various formulations currently in clinical trials. In order to emulate natural oligoamine gene regulators, linear random copolymers containing both PEI and polypropylenimine (PPI) repeat units were designed as novel gene delivery agents. In general, statistical copolymerization of 2-oxazolines and 2-oxazines leads to the formation of gradient copolymers. In this study, however, we describe for the first time the synthesis of near-ideal random 2-oxazoline/2-oxazine copolymers through careful tuning of the monomer structures and reactivity as well as polymerization conditions. These copolymers were then transformed into near-random PEI-PPI copolymers by controlled side-chain hydrolysis. The prepared PEI-PPI copolymers formed stable polyplexes with GFP-encoding plasmid DNA, as validated by dynamic light scattering. Furthermore, the cytotoxicity and transfection efficiency of polyplexes were evaluated in C2C12 mouse myoblasts. While the polymer chain length did not significantly increase the toxicity, a higher PPI content was associated with increased toxicity and also lowered the amount of polymers needed to achieve efficient transfection. The transfection efficiency was significantly influenced by the degree of polymerization of PEI-PPI, whereby longer polymers resulted in more transfected cells. Copolymers with 60% or lower PPI content exhibited a good balance between high plasmid-DNA transfection efficiency and low toxicity. Interestingly, these novel PEI-PPI copolymers revealed exceptional serum tolerance, whereby transfection efficiencies of up to 53% of transfected cells were achieved even under 50% serum conditions. These copolymers, especially PEI-PPI with DP500 and a 1:1 PEI/PPI ratio, were identified as promising transfection agents for plasmid DNA.

Accelerated Post-Polymerization Amidation of Polymers with Side-Chain Ester Groups by Intramolecular Activation.

The catalytic conversion of esters to amides represents new opportunities in the synthetic diversification and upcycling of polymers, as esters are commonly featured in various polymer structures. Yet, direct amidation is typically hampered by poor reaction kinetics and the effects of polymer structure on the reactivity remain poorly understood. We report the accelerated amidation for amines with additional hydrogen bond donating or accepting groups. These amines facilitate the expeditious (co)amidation of polymers with pendant ester groups, displaying at least a 400-fold higher reactivity relative to polyesters with esters in the main chain. Furthermore, a positive correlation between the reactivity and degree of polymerization for poly(methyl acrylate) suggests a hydrogen-bond mediated intramolecular activation of the esters, which was confirmed by FT-IR spectroscopy and basic molecular mechanics modeling. The reported method paves the way to synthesize diverse (co)polymers with amide side chains from readily available polymeric precursors.

In Vitro Assessment of the Hydrolytic Stability of Poly(2-isopropenyl-2-oxazoline).

Poly(2-isopropenyl-2-oxazoline) (PiPOx) is emerging as a promising, versatile polymer platform to design functional materials and particularly biomaterials that rely on the hydrophilic character of the 2-oxazoline side units. To be able to assess the applicability of PiPOx in a biomedical context, it is essential to understand its stability and degradation behavior in physiological conditions. In the present work, the hydrolytic stability of PiPOx was systematically investigated as a function of pH during incubation in various buffers. PiPOx was found to be stable in deionized water (pH 6.9), to have good stability in basic conditions (pH 8 and 9), to be satisfactorily stable in neutral conditions (pH 7.4), and to have moderate to low stability in acidic conditions (decreases drastically from pH 6 to pH 1.2). At pH 4, PiPOx formed a crosslinked network in a timeframe of hours, while at pH 1.2, PiPOx was transformed to a water-soluble poly(N-(2-hydroxyethyl)methacrylamide) type of structure over the course of 2 weeks. In vitro stability assays were performed in phosphate-buffered saline (pH 7.4), simulated body fluid (SBF) (pH 7.4), simulated saliva (pH 6.4), simulated intestinal fluid (pH 6.8), and plasma (pH 7.4) revealing that PiPOx is stable in these SBFs up to 1 week of incubation. When incubated in simulated gastric fluid (pH 1.2), PiPOx exhibited a similar degradation behavior to that observed in the buffer at pH 1.2, rendering a water-soluble structure. The presented results on the stability of PiPOx will be important for future use of PiPOx for the development of drug-delivery systems and biomedical applications, such as hydrogels.

Thermoresponsive Polymer-Antibiotic Conjugates Based on Gradient Copolymers of 2-Oxazoline and 2-Oxazine.

A polymer-antibiotic conjugate with thermoresponsive properties near body temperature is presented. The backbone polymer is a copolymer of 2-n-propyl-2-oxazine (PropOzi) and methoxycarbonylethyl-2-oxazoline (C2MestOx) which is conjugated with the broad-spectrum antibiotic, cefazolin, via modification of the methyl ester group of C2MestOx. The resulting polymer-antibiotic conjugate has a cloud point temperature near body temperature, meaning that it can form a homogenous solution if cooled, but when injected into a skin-mimic at 37 °C, it forms a drug depot precipitate. Cleavage of the ester linker leads to quantitative release of the pristine cefazolin (with some antibiotic degradation observed) and redissolution of the polymer. When Escherichia coli were treated with polymer-antibiotic conjugate total clearance is observed within 12 h. The power of this approach is the potential for localized antibiotic delivery, for example, at a specific tissue site or into infected phagocytic cells.

Judging Enzyme-Responsive Micelles by Their Covers: Direct Comparison of Dendritic Amphiphiles with Different Hydrophilic Blocks.

Enzymatically degradable polymeric micelles have great potential as drug delivery systems, allowing the selective release of their active cargo at the site of disease. Furthermore, enzymatic degradation of the polymeric nanocarriers facilitates clearance of the delivery system after it has completed its task. While extensive research is dedicated toward the design and study of the enzymatically degradable hydrophobic block, there is limited understanding on how the hydrophilic shell of the micelle can affect the properties of such enzymatically degradable micelles. In this work, we report a systematic head-to-head comparison of well-defined polymeric micelles with different polymeric shells and two types of enzymatically degradable hydrophobic cores. To carry out this direct comparison, we developed a highly modular approach for preparing clickable, spectrally active enzyme-responsive dendrons with adjustable degree of hydrophobicity. The dendrons were linked with three different widely used hydrophilic polymers-poly(ethylene glycol), poly(2-ethyl-2-oxazoline), and poly(acrylic acid) using the CuAAC click reaction. The high modularity and molecular precision of the synthetic methodology enabled us to easily prepare well-defined amphiphiles that differ either in their hydrophilic block composition or in their hydrophobic dendron. The micelles of the different amphiphiles were thoroughly characterized and their sizes, critical micelle concentrations, drug loading, stability, and cell internalization were compared. We found that the micelle diameter was almost solely dependent on the hydrophobicity of the dendritic hydrophobic block, whereas the enzymatic degradation rate was strongly dependent on the composition of both blocks. Drug encapsulation capacity was very sensitive to the type of the hydrophilic block, indicating that, in addition to the hydrophobic core, the micellar shell also has a significant role in drug encapsulation. Incubation of the spectrally active micelles in the presence of cells showed that the hydrophilic shell significantly affects the micellar stability, localization, cell internalization kinetics, and the cargo release mechanism. Overall, the high molecular precision and the ability of these amphiphiles to report their disassembly, even in complex biological media, allowed us to directly compare the different types of micelles, providing striking insights into how the composition of the micelle shells and cores can affect their properties and potential to serve as nanocarriers.

Fluorine-Containing Block and Gradient Copoly(2-oxazoline)s Based on 2-(3,3,3-Trifluoropropyl)-2-oxazoline: A Quest for the Optimal Self-Assembled Structure for 19F Imaging.

The use of fluorinated contrast agents in magnetic resonance imaging (MRI) facilitates improved image quality due to the negligible amount of endogenous fluorine atoms in the body. In this work, we present a comprehensive study of the influence of the amphiphilic polymer structure and composition on its applicability as contrast agents in 19F MRI. Three series of novel fluorine-containing poly(2-oxazoline) copolymers and terpolymers, hydrophilic-fluorophilic, hydrophilic-lipophilic-fluorophilic, and hydrophilic-thermoresponsive-fluorophilic, with block and gradient distributions of the fluorinated units, were synthesized. It was discovered that the CF3 in the 2-(3,3,3-trifluoropropyl)-2-oxazoline (CF3EtOx) group activated the cationic chain end, leading to faster copolymerization kinetics, whereby spontaneous monomer gradients were formed with accelerated incorporation of 2-methyl-2-oxazoline or 2-n-propyl-2-oxazoline with a gradual change to the less-nucleophilic CF3EtOx monomer. The obtained amphiphilic copolymers and terpolymers form spherical or wormlike micelles in water, which was confirmed using transmission electron microscopy (TEM), while small-angle X-ray scattering (SAXS) revealed the core-shell or core-double-shell morphologies of these nanoparticles. The core and shell sizes obey the scaling laws for starlike micelles predicted by the scaling theory. Biocompatibility studies confirm that all copolymers obtained are noncytotoxic and, at the same time, exhibit high sensitivity during in vitro 19F MRI studies. The gradient copolymers provide the best 19F MRI signal-to-noise ratio in comparison with the analogue block copolymer structures, making them most promising as 19F MRI contrast agents.

Poly(2-allylamidopropyl-2-oxazoline)-Based Hydrogels: From Accelerated Gelation Kinetics to In Vivo Compatibility in a Murine Subdermal Implant Model.

A rapid photo-curing system based on poly(2-ethyl-2-oxazoline-co-2-allylamidopropyl-2-oxazoline) and its in vivo compatibility are presented. The base polymer was synthesized from the copolymerization of 2-ethyl-2-oxazoline (EtOx) and the methyl ester containing 2-methoxycarboxypropyl-2-oxazoline (C3MestOx) followed by amidation with allylamine to yield a highly water-soluble macromer. We showed that spherical hydrogels can be obtained by a simple water-in-oil gelation method using thiol-ene coupling and investigated the in vivo biocompatibility of these hydrogel spheres in a 28-day murine subdermal model. For comparison, hydrogel spheres prepared from poly(ethylene glycol) were also implanted. Both materials displayed mild, yet typical foreign body responses with little signs of fibrosis. This is the first report on the foreign body response of a poly(2-oxazoline) hydrogel, which paves the way for future investigations into how this highly tailorable class of materials can be used for implantable hydrogel devices.

Effect of Host-Guest Complexation on the Thermoresponsive Behavior of Poly(oligo ethylene glycol acrylate)s Functionalized with Dialkoxynapththalene Guest Side Chains.

The combination of thermoresponsive polymers with supramolecular host-guest interactions enables accurate tuning of the phase transition temperature, while also providing additional response mechanisms based on host-guest complexation. Most studies focused on a single thermoresponsive polymer to demonstrate the effect of host-guest complexation on the responsive behavior. In this work, the effect of the polymer structure on the host-guest complexation and thermoresponsive behavior is reported. Therefore, different poly(oligoethylene glycol acrylate)s, namely, poly(2-hydroxyethylacrylate) (PHEA), poly(methoxy diethylene glycol acrylate), poly(methoxy triethylene glycol acrylate), and poly(methoxy tetraethylene glycol acrylate), are synthesized functionalized with 1,5-dialkoxynaphthalene guest molecules in the side chain. Their complexation with the cyclobis(paraquat-p-phenylene) tetrachloride host is studied to understand the effect of polymer structure on the supramolecular association and the polymer phase transition, revealing that the oligoethylene glycol side chains lead to weaker host-guest complexation and also have a smaller increase in the cloud point temperature compared to PHEA.

Asymmetric Incorporation of Silver Nanoparticles in Polymeric Assemblies by Coassembly of Tadpole-Like Nanoparticles and Amphiphilic Block Copolymers.

A general approach to asymmetrically localize nanoparticles (NPs) in larger polymeric nanostructures is demonstrated by coassembly of tadpole-like silver NPs (AgNPs) and amphiphilic block copolymers (BCPs). The tadpole-like AgNPs are prepared by template synthesis using a tailor-made A(BC)20 star polymer, namely poly(ethylene glycol)[poly(acrylic acid)-block-polystyrene]20 [PEG(PAA-b-PS)20 ], as template resulting in AgNPs decorated with twenty short PS chains and one long PEG chain, named Ag@PEG(PS)20 . The asymmetric distribution of these AgNPs in various polymeric nanostructures, e.g., spherical micelles, cylindrical micelles, vesicles, and sponge phase, is achieved via coassembly of the as-prepared Ag@PEG(PS)20 and PEG-b-PS in solution driven by the anisotropic nature of the Ag@PEG(PS)20 . This report not only provides a new strategy for the fabrication of tadpole-like NPs but also offers opportunity for off-center distributing NPs in hybrid assemblies, which may find applications in, e.g., sensing, catalysis, and diagnostics.

Self-Healing Metallo-Supramolecular Hydrogel Based on Specific Ni2+ Coordination Interactions of Poly(ethylene glycol) with Bistriazole Pyridine Ligands in the Main Chain.

In this study, a supramolecular hydrogel formed by incorporating the 2,6-bis(1,2,3-triazol-4-yl)-pyridine (btp) ligand in the backbone of a polymer prepared by copper(I)-catalyzed alkyne-azide cycloaddition (CuAAC) "click" polyaddition reaction of 2,6-diethynylpyridine and diazido-poly(ethylene glycol) is reported. The hydrogelation is selectively triggered by the addition of Ni2+ ions to aqueous copolymer solutions. The gelation and rheological properties could be tuned by the change of metal to ligand ratio and polymer concentration. Interestingly, the hydrogel exhibits a fast (within 2 min) and excellent repeatable autonomic healing capacity without external stimuli. This self-healing behavior may find potential applications for the repairing of metal coatings, in the future.

Metal Ion Selective Self-Assembly of a Ligand Functionalized Polymer into [1+1] Macrocyclic and Supramolecular Polymer Structures via Metal-Ligand Coordination.

The design and synthesis of polymer-based metallomacrocycles relying on metal-ligand interactions remain a challenge in the polymer field. Instead of utilizing chemical reactions to synthesize macrocycles, a general approach is proposed to construct metallomacrocyclic structures through supramolecular self-assembly of a specific macroligand with suitable transition metal ions. Therefore, a new ditopic macroligand (L) consisting of PEG end-capped with 2,6-bis(1,2,3-triazol-4-yl)pyridine derivatives is prepared via CuAAC "click" reaction. Four types of metal (Fe2+ , Zn2+ , Ni2+ , and Cu2+ ) complexes are obtained by simply mixing a solution of metal ions and L in appropriate concentrations. The investigation of the coordination chemistry suggests that coordination of L with Cu2+ results in the formation of a [1+1] metallomacrocycle, while the other metal complexes exclusively lead to the formation of linear metallopolymers and/or larger aggregates. This work provides new insights into designing metallomacrocycles and may have potential application in the synthesis of catenanes and other cyclic or cycle-based topological architectures.

Stoichiometric Control over Partial Transesterification of Polyacrylate Homopolymers as Platform for Functional Copolyacrylates.

Only recently, post-polymerization modification reactions of unactivated polyacrylates have been emerging as an attractive alternative to utilizing reactive monomers, enabling the synthetic upcycling of these widely applied polymers. Within this contribution, the triazabicyclodecene-catalyzed transesterification of polyacrylates is reported, including the reaction kinetics and the broad scope for macromolecular design of functional copolyacrylates. More specifically, the transesterification is performed under equilibrium conditions with a set of primary alcohols whereby the reaction kinetics and the obtained conversion as a function of stoichiometric excess of alcohol are evaluated. The results show that the obtained conversion is dependent on the polarity of the solvent and of the alcohol. Through this approach, the transesterification degree can be accurately controlled by stoichiometry, enabling the precise modulation of the macromolecular structure. Finally, the utility of this approach is demonstrated to incorporate functional side chains that are incompatible with radical polymerization, to facilitate Diels-Alder and thiol-ene reactions, enabling access to a broad range of functional materials from simple polyacrylate homopolymer precursors.

Straightforward Route to Superhydrophilic Poly(2-oxazoline)s via Acylation of Well-Defined Polyethylenimine.

Herein, we describe a new method for the synthesis of superhydrophilic poly(2-alkyl-2-oxazoline)s (PAOx) from poly(2-ethyl-2-oxazoline) (PEtOx). A well-defined linear polyethylenimine was prepared from PEtOx by controlled acidic hydrolysis of its side-chains followed by reacylation with different carboxylic acids. Using this protocol, we obtained a series of new hydrophilic PAOx containing side-chain ether groups with potential in biomaterials science. The relative hydrophilicity of the polymers was assessed, revealing that poly(2-methoxymethyl-2-oxazoline) (PMeOMeOx) is the most hydrophilic PAOx reported to date. Additionally, the amorphous poly(2-methoxy-ethoxy-ethoxymethyl-2-oxazoline) (PDEGOx) shows the lowest reported glass transition temperature (-25 °C) within the PAOx family to date. The biomedical potential of the prepared polymers was further fortified by an in vitro cytotoxicity study, where all polymers appeared to be noncytotoxic. The described synthetic protocol is universal and can be extremely versatile, especially for PAOx that are difficult to prepare by conventional cationic ring-opening polymerization due to the monomer interference and/or degradation.

Thermoresponsive DNA by Intercalation of dsDNA with Oligoethylene-Glycol-Functionalized Small-Molecule Intercalators.

Thermoresponsive polymeric materials are important building blocks for smart materials. In this work, the transformation of dsDNA into a thermoresponsive polymer is reported by intercalation of short, oligoethylene-glycol-modified proflavine intercalators. The thermoresponsiveness of the dsDNA-intercalator complex originates from the heating-induced dehydration of the ethylene glycol side chains, which leads to aggregation of the intercalated dsDNA. This work demonstrates the possibility of designing small-molecule intercalators to prepare thermoresponsive dsDNA complexes with tunable lower critical solution temperature behavior.

Supramolecular Competitive Host-Guest Interaction Induced Reversible Macromolecular Metamorphosis.

In this work, a rational strategy of competitive host-guest complexation between dioxynaphthalene (Naph) and tetrathiafulvalene (TTF) subunits as guests and cyclophane cyclobis(paraquat-p-phenylene) (CBPQT4+ ) module as host is exploited to modify the macromolecular architecture, so-called supramolecular metamorphosis, in aqueous media. The architectures of the polymers can be reversibly transformed from a linear diblock copolymer AB to a linear AC block copolymer or from a linear block copolymer to a comb copolymer by redox switching. Interestingly, as TTF- and Naph-based complexes feature different characteristic colors, it offers a great opportunity to directly observe nanoscaled macromolecular metamorphosis of materials with the naked eye.

Responsive biomimetic networks from polyisocyanopeptide hydrogels.

Mechanical responsiveness is essential to all biological systems down to the level of tissues and cells. The intra- and extracellular mechanics of such systems are governed by a series of proteins, such as microtubules, actin, intermediate filaments and collagen. As a general design motif, these proteins self-assemble into helical structures and superstructures that differ in diameter and persistence length to cover the full mechanical spectrum. Gels of cytoskeletal proteins display particular mechanical responses (stress stiffening) that until now have been absent in synthetic polymeric and low-molar-mass gels. Here we present synthetic gels that mimic in nearly all aspects gels prepared from intermediate filaments. They are prepared from polyisocyanopeptides grafted with oligo(ethylene glycol) side chains. These responsive polymers possess a stiff and helical architecture, and show a tunable thermal transition where the chains bundle together to generate transparent gels at extremely low concentrations. Using characterization techniques operating at different length scales (for example, macroscopic rheology, atomic force microscopy and molecular force spectroscopy) combined with an appropriate theoretical network model, we establish the hierarchical relationship between the bulk mechanical properties and the single-molecule parameters. Our results show that to develop artificial cytoskeletal or extracellular matrix mimics, the essential design parameters are not only the molecular stiffness, but also the extent of bundling. In contrast to the peptidic materials, our polyisocyanide polymers are readily modified, giving a starting point for functional biomimetic hydrogels with potentially a wide variety of applications, in particular in the biomedical field.

A Synthetic, Transiently Thermoresponsive Homopolymer with UCST Behaviour within a Physiologically Relevant Window.

Interactive materials that can respond to a trigger by changing their morphology, but that can also gradually degrade into a fully soluble state, are attractive building blocks for the next generation of biomaterials. Herein, we design such transiently responsive polymers that exhibit UCST behaviour while gradually losing this property in response to a hydrolysis reaction in the polymer side chains. The polymers operate within a physiologically relevant window in terms of temperature, pH, and ionic strength. Whereas such behaviour has been reported earlier for LCST systems, it is at present unexplored for UCST polymers. Furthermore, we demonstrate that, in contrast to LCST polymers, in aqueous medium the UCST polymer forms a coacervate phase below the UCST, which can entrap a hydrophilic model protein, as well as a hydrophobic dye. Because of their non-toxicity, we also provide in vivo proof of concept of the use of this coacervate as a protein depot, in view of sustained-release applications.