Folic acid modified Pluronic F127 coating Ag2S quantum dot for photoacoustic imaging of tumor cell-targeting.

In this study, an oil-soluble Ag2S quantum dot (QD) was synthesized through thermal decomposition using the single-source precursor method, and Pluronic F127 (PF127), a triblock copolymer functionalized with folic acid (FA), was deposited on the surface of the QD, then a water-soluble PF127-FA@Ag2S nanoprobe with targeting ability was fabricated. The as-prepared PF127-FA@Ag2S exhibited spheroidal morphology and high dispersibility, with average diameters of 115 ± 20.7 nm (as observed by transmission electron microscopy). No obvious toxicity of the PF127-FA@Ag2S nanoprobe was found in standard 3-(4, 5-dimethylthiazol-2-yl)-2, 5-diphenyltetrazolium bromide assay and colony-formation assay, indicating good biocompatibility and safety. The resulting PF127-FA@Ag2S exhibited excellent stability between 4 °C-40 °C. Additionally, the capacity of the tumor cell-targeting high contrast enhanced photoacoustic imaging of PF127-FA@Ag2S was verified in comparison with A547 and HeLa cells. In other words, the excellent properties of PF127-FA@Ag2S show great potential in further research for targeting and photoacoustic imaging.

A multifunctional targeting probe with dual-mode imaging and photothermal therapy used in vivo.

BACKGROUND: Ag2S has the characteristics of conventional quantum dot such as broad excitation spectrum, narrow emission spectrum, long fluorescence lifetime, strong anti-bleaching ability, and other optical properties. Moreover, since its fluorescence emission is located in the NIR-II region, has stronger penetrating ability for tissue. Ag2S quantum dot has strong absorption during the visible and NIR regions, it has good photothermal and photoacoustic response under certain wavelength excitation. RESULTS: 200 nm aqueous probe Ag2S@DSPE-PEG2000-FA (Ag2S@DP-FA) with good dispersibility and stability was prepared by coating hydrophobic Ag2S with the mixture of folic acid (FA) modified DSPE-PEG2000 (DP) and other polymers, it was found the probe had good fluorescent, photoacoustic and photothermal responses, and a low cell cytotoxicity at 50 µg/mL Ag concentration. Blood biochemical analysis, liver enzyme and tissue histopathological test showed that no significant influence was observed on blood and organs within 15 days after injection of the probe. In vivo and in vitro fluorescence and photoacoustic imaging of the probe further demonstrated that the Ag2S@DP-FA probe had good active targeting ability for tumor. In vivo and in vitro photothermal therapy experiments confirmed that the probe also had good ability of killing tumor by photothermal. CONCLUSIONS: Ag2S@DP-FA was a safe, integrated diagnosis and treatment probe with multi-mode imaging, photothermal therapy and active targeting ability, which had a great application prospect in the early diagnosis and treatment of tumor.

Microneedle-mediated nose-to-brain drug delivery for improved Alzheimer's disease treatment.

Conventional transnasal brain-targeted drug delivery strategies are limited by nasal cilia clearance and the nasal mucosal barrier. To address this challenge, we designed dissolving microneedles combined with nanocarriers for enhanced nose-to-brain drug delivery. To facilitate transnasal administration, a toothbrush-like microneedle patch was fabricated with hyaluronic acid-formed microneedles and tannic acid-crosslinked gelatin as the base, which completely dissolved in the nasal mucosa within seconds leaving only the base, thereby releasing the loaded cyclodextrin-based metal-organic frameworks (CD-MOFs) without affecting the nasal cilia and nasal microbial communities. As nanocarriers for high loading of huperzine A, these potassium-structured CD-MOFs, reinforced with stigmasterol and functionalized with lactoferrin, possessed improved physical stability and excellent biocompatibility, enabling efficient brain-targeted drug delivery. This delivery system substantially attenuated H2O2- and scopolamine-induced neurocyte damage. The efficacy of huperzine A on scopolamine- and D-galactose & AlCl3-induced memory deficits in rats was significantly improved, as evidenced by inhibiting acetylcholinesterase activity, alleviating oxidative stress damage in the brain, and improving learning function, meanwhile activating extracellular regulated protein kinases-cyclic AMP responsive element binding protein-brain derived neurotrophic factor pathway. Moreover, postsynaptic density protein PSD-95, which interacts with two important therapeutic targets Tau and ß-amyloid in Alzheimer's disease, was upregulated. This fruitful treatment was further shown to significantly ameliorate Tau hyperphosphorylation and decrease ß-amyloid by ways including modulating beta-site amyloid precursor protein cleaving enzyme 1 and a disintegrin and metalloproteinase 10. Collectively, such a newly developed strategy breaks the impasse for efficient drug delivery to the brain, and the potential therapeutic role of huperzine A for Alzheimer's disease is further illustrated.

Phytosterol-mediated glycerosomes combined with peppermint oil enhance transdermal delivery of lappaconitine by modulating the lipid composition of the stratum corneum.

Although the introduction of glycerosomes has enriched strategies for efficient transdermal drug delivery, the inclusion of cholesterol as a membrane stabilizer has limited their clinical application. The current study describes the development and optimization of a new type of glycerosome (S-glycerosome) that is formed in glycerol solution with ß-sitosterol as the stabilizer. Moreover, the transdermal permeation properties of lappaconitine (LA)-loaded S-glycerosomes and peppermint oil (PO)-mediated S-glycerosomes (PO-S-glycerosomes) are evaluated, and the lipid alterations in the stratum corneum are analyzed via lipidomics. The LA-loaded S-glycerosomes prepared by the preferred formulation from the uniform design have a mean size of 145.3 ± 7.81 nm and an encapsulation efficiency of 73.14 ± 0.35%. Moreover, the addition of PO positively impacts transdermal flux, peaking at 0.4% (w/v) PO. Tracing of the fluorescent probe P4 further revealed that PO-S-glycerosomes penetrate deeper into the skin than S-glycerosomes and conventional liposomes. Additionally, treatment with PO-S-glycerosomes alters the isoform type, number, and composition of sphingolipids, glycerophospholipids, glycerolipids, and fatty acids in the stratum corneum, with the most notable effect observed for ceramides, the main component of sphingolipids. Furthermore, the transdermal administration of LA-loaded PO-S-glycerosomes improved the treatment efficacy of xylene-induced inflammation in mice without skin irritation. Collectively, these findings demonstrate the feasibility of ß-sitosterol as a stabilizer in glycerosomes. Additionally, the inclusion of PO improves the transdermal permeation of S-glycerosomes, potentially by altering the stratum corneum lipids.

Competitive protein adsorption of albumin and immunoglobulin G from human serum onto polymer surfaces.

Competitive protein adsorption from human serum onto unmodified polyethylene terephthalate (PET) surfaces and plasma-polymerized PET surfaces, using the monomer diethylene glycol vinyl ether (DEGVE), has been investigated using radioactive labeling. Albumin and immunoglobulin G (IgG) labeled with two different iodine isotopes have been added to human serum solutions of different concentrations, and adsorption has been performed using adsorption times from approximately 5 s to 24 h. DEGVE surfaces showed indications of being nonfouling regarding albumin and IgG adsorption during competitive protein adsorption from diluted human serum solutions with relatively low protein concentrations, but the nonfouling character was weakened when less diluted human serum solutions with higher protein concentrations were used. The observed adsorption trend is independent of adsorption time, indicating that the protein concentration has a stronger influence on observed adsorption characteristics of the material than the adsorption time has.

Role of extracellular polymeric substance in determining the high aggregation ability of anammox sludge.

The high aggregation ability of anammox sludge has been extensively observed, but the cause for their aggregation is challenging. Here the structure and composition of extracellular polymeric substance (EPS) excreted from anammox sludge were systematically investigated to interpret the high aggregation ability. We combine results of contact angle, zeta potential and surface thermodynamics analysis as well as the following DLVO theory to address this issue. The results show that hydrophobic interaction is the main force determining the aggregation of anammox sludge. To go insight into inherent mechanism, Fourier transform infrared (FTIR) and x-ray photoelectron (XPS) spectroscopy were conducted and demonstrated there were comparatively few hydrophilic functional groups in the EPS of anammox sludge, compared to that of activated sludge, nitrifying and denitrifying sludge. Further, amino acid composition and secondary structure analyses of protein indicated that large amounts of hydrophobic amino acids and high level of protein loose structure for exposing inner hydrophobic groups of protein in EPS significantly contributed to the hydrophobic interaction and further to the high aggregation ability of anammox sludge, which is the critical finding of this work. This investigation is useful for understanding anammox bacteria and then for accelerating the application of the anammox process in wastewater treatment.

Fibrinogen adsorption on blocked surface of albumin.

We have investigated the adsorption of albumin and fibrinogen onto PET (polyethylene terephthalate) and glass surfaces and how pre-adsorption of albumin onto these surfaces can affect the adsorption of later added fibrinogen. For materials and devices being exposed to blood, adsorption of fibrinogen is often a non-wanted event, since fibrinogen is part of the clotting cascade and unspecific adsorption of fibrinogen can have an influence on the activation of platelets. Albumin is often used as blocking agent for avoiding unspecific protein adsorption onto surfaces in devices designed to handle biological samples, including protein solutions. It is based on the assumption that proteins adsorbs as a monolayer on surfaces and that proteins do not adsorb on top of each other. By labelling albumin and fibrinogen with two different radioactive iodine isotopes that emit gamma radiation with different energies, the adsorption of both albumin and fibrinogen has been monitored simultaneously on the same sample. Information about topography and coverage of adsorbed protein layers has been obtained using AFM (Atomic Force Microscopy) analysis in liquid. Our studies show that albumin adsorbs in a multilayer fashion on PET and that fibrinogen adsorbs on top of albumin when albumin is pre-adsorbed on the surfaces.

Competitive protein adsorption to polymer surfaces from human serum.

Surface modification by "soft" plasma polymerisation to obtain a hydrophilic and non-fouling polymer surface has been validated using radioactive labelling. Adsorption to unmodified and modified polymer surfaces, from both single protein and human serum solutions, has been investigated. By using different radioisotopes, albumin and Immunoglobulin G (IgG) adsorption has been monitored simultaneously during competitive adsorption processes, which to our knowledge has not been reported in the literature before. Results show that albumin and IgG adsorption is dependent on adsorption time and on the presence and concentration of other proteins in bulk solutions during adsorption. Generally, lower albumin and IgG adsorption was observed on the modified and more hydrophilic polymer surfaces, but otherwise the modified and unmodified polymer surfaces showed the same adsorption characteristics.

Protein aggregation and degradation during iodine labeling and its consequences for protein adsorption to biomaterials.

Protein adsorption on modified and unmodified polymer surfaces investigated through radiolabeling experiments showed a tendency for higher than expected albumin and immunoglobulin G (IgG) adsorption. Possible enhanced protein aggregation and degradation caused by the iodine labeling method used were analyzed through chromatography and spectroscopy techniques. Results show that the iodine labeling method using chloramine-T (CAT) as an oxidizing agent can cause both enhanced aggregation and fragmentation of proteins. Albumin shows an enhanced tendency to aggregate after iodine labeling using the CAT method, and higher amounts of fragmentation are observed for CAT-labeled IgG molecules relative to unlabeled IgG molecules as well as to IgG molecules labeled using the Iodo-Gen method. These results show that the widely applied method of radioisotope labeling for quantitative assessment of protein adsorption should be used with caution and preferably should be validated by a label-free methodology for each combination of radiolabel and protein. The results obtained in this study can be used to optimize investigation of protein adsorption on surfaces of materials for biomedical devices.