Maxillofacial growth changes after maxillary protraction therapy in children with class III malocclusion: a dual control group retrospective study.

PURPOSE: To investigate the balance between post-treatment effect and continued nature growth after maxillary protraction treatment in patients with skeletal class III malocclusion. METHODS: 31 patients aged 8.79 ± 1.65 years with skeletal Class III malocclusion had been treated with maxillary protraction and the treatment lasted an average of 1.16 years. The average observation duration after treatment in the maxillary protraction group was 2.05 ± 0.39 years. In the control groups, a sample of 22 patients (9.64 ± 2.53 years) with untreated skeletal class III malocclusion and 24 patients (9.28 ± 0.96 years) with skeletal class I malocclusion were matched to the treatment group according to age, sex and observation period. The mean observation interval of the control groups was 2.39 ± 1.29 years in the class III group and 1.97 ± 0.49 years in the class I group. RESULTS: The active orthopedic treatment effect showed a opposite trend to the natural craniomaxillofacial growth effect after treatment in many aspects. In the observation duration of treatment group, decrease in ANB, Wits appraisal and BAr-AAr were statistically significant compared to class I control group (p < 0.001), and there was a significant increase in NA-FH (P < 0.001) which was contrary to class III control group. Treatment group presented a significant increase in Gn-Co (P < 0.01) and Co-Go (P < 0.001), except for changes in the extent of the mandibular base (Pog-Go, P = 0.149) compared to class I control group. The vertical maxillomandibular skeletal variables (Gonial; MP-SN; MP-FH; Y-axis) in treatment group decreased significantly compared to those in class III control group (P < 0.01). U1-SN and L1-MP showed a significant increase, which was similar to the class I group (P > 0.05), and overjet decreased significantly relative to both of the two control groups (P < 0.05). CONCLUSION: Maxillary protraction therapy led to stable outcomes in approximately 77.42% of children with Class III malocclusion approximately 2 years after treatment. Unfavorable skeletal changes were mainly due to the greater protrusion of the mandible but maxillary protraction did have a certain degree of postimpact on the mandibular base. Protraction therapy does not fundamentally change the mode of maxillary growth in Class III subjects except for the advancement of the maxilla. Craniomaxillofacial region tend to restabilize after treatment and lead to skeletal growth rotation and more dentoalveolar compensation.

RNA interference-based osteoanabolic therapy for osteoporosis by a bone-formation surface targeting delivery system.

RNA interference (RNAi)-based gene therapy that promotes anabolic bone formation is an effective approach for addressing osteoporosis. However, the selection of target gene and tissue-specific delivery systems has hindered the progression of this strategy. In this study, we identified casein kinase-2 interacting protein-1 encoding gene (Ckip-1), a negative regulator of bone formation, as an effective target of small interfering RNAs (siRNAs) for improving bone mass. Moreover, an impressive (DSS)6-Liposome (Lipos) nanoparticle system that could target the bone formation surface was synthesized to enhance the delivery of Ckip-1 siRNA to osteogenic lineage cells. The in vitro results confirmed that the (DSS)6-Lipos system could efficaciously improve the intracellular delivery of Ckip-1 siRNA without obvious cell toxicity. The in vivo application of the delivery system showed specific accumulation of siRNA in osteogenic cells located around the bone formation surface. Bone-related analysis indicated increased bone mass and improved bone microarchitecture in mice with ovariectomy-induced osteoporosis. Moreover, the biomechanical characteristics of the tibia were enhanced significantly, indicating increased resistance to fragile fracture induced by osteoporosis. Thus, (DSS)6-Lipos-Ckip-1 siRNA-based osteoanabolic therapy may be a promising option for the treatment of osteoporosis.

Valine/isoleucine variants drive selective pressure in the VP1 sequence of EV-A71 enteroviruses.

BACKGROUND: In 2011-2012, Northern Vietnam experienced its first large scale hand foot and mouth disease (HFMD) epidemic. In 2011, a major HFMD epidemic was also reported in South Vietnam with fatal cases. This 2011-2012 outbreak was the first one to occur in North Vietnam providing grounds to study the etiology, origin and dynamic of the disease. We report here the analysis of the VP1 gene of strains isolated throughout North Vietnam during the 2011-2012 outbreak and before. METHODS: The VP1 gene of 106 EV-A71 isolates from North Vietnam and 2 from Central Vietnam were sequenced. Sequence alignments were analyzed at the nucleic acid and protein level. Gene polymorphism was also analyzed. A Factorial Correspondence Analysis was performed to correlate amino acid mutations with clinical parameters. RESULTS: The sequences were distributed into four phylogenetic clusters. Three clusters corresponded to the subgenogroup C4 and the last one corresponded to the subgenogroup C5. Each cluster displayed different polymorphism characteristics. Proteins were highly conserved but three sites bearing only Isoleucine (I) or Valine (V) were characterized. The isoleucine/valine variability matched the clusters. Spatiotemporal analysis of the I/V variants showed that all variants which emerged in 2011 and then in 2012 were not the same but were all present in the region prior to the 2011-2012 outbreak. Some correlation was found between certain I/V variants and ethnicity and severity. CONCLUSIONS: The 2011-2012 outbreak was not caused by an exogenous strain coming from South Vietnam or elsewhere but by strains already present and circulating at low level in North Vietnam. However, what triggered the outbreak remains unclear. A selective pressure is applied on I/V variants which matches the genetic clusters. I/V variants were shown on other viruses to correlate with pathogenicity. This should be investigated in EV-A71. I/V variants are an easy and efficient way to survey and identify circulating EV-A71 strains.

Functional evaluation of a CAD/CAM prosthesis for immediate defect repair after total maxillectomy: a case series of 18 patients with maxillary sinus cancer.

OBJECTIVE: To evaluate the facial profiles and functional recovery of 18 patients treated by a computer-aided designed/manufactured hollow obturator prosthesis (CAD/CAM prosthesis) after total maxillectomy for malignant maxillary sinus tumor. MATERIALS AND METHODS: A retrospective observational study was performed to evaluate the facial profiles and functional recovery of 18 patients with T3-4a N0 M0 maxillary sinus cancer, who were treated by total maxillectomy and simultaneous implantation of a computer-aided designed/manufactured hollow obturator prosthesis (CAD/CAM prosthesis). Follow-ups were performed 1, 3, 6, and 12 months after surgery. Facial measurements, speech intelligibility, and chewing and swallowing functions were examined. Thirteen patients converted to a permanent prosthesis 6 months after surgery. Comparisons were made between patients with and without the CAD/CAM or permanent prosthesis at various times using SPSS13.0 statistical software (SPSS Inc., Chicago, IL, USA). RESULTS: Speech intelligibility, facial depression, and eyeball prolapse results showed improvements with prosthesis use at 1, 3, and 6 months after surgery (p < 0.05). Swallowing function improved from level V to level II-IV with prosthesis use at 1, 3, and 6 months, and reached level I or II with permanent prosthesis use at 12 months after surgery. CONCLUSIONS: Simultaneous CAD/CAM prosthesis implantation recovered the facial profile, enhanced the speaking, swallowing, and chewing functions, and improved the quality of life of patients. Tumor recurrence can be detected by direct observation of the postoperative maxillary cavity. Therefore, this operation is recommended for simultaneous excision repair and functional reconstruction after total maxillectomy. CLINICAL SIGNIFICANCE: This surgical treatment of maxillary sinus cancer is applied rarely in China, but it has a good effect based on our observation. Simultaneous CAD/CAM prosthesis implantation after total maxillectomy can recover the facial profile, enhance the speaking, swallowing, and chewing functions, and improve the quality of life of patients. Tumor recurrence can be detected by direct observation of the postoperative maxillary cavity. This technique avoids the need for dental implants because the bottom part of the prosthesis contains a palatal plate with dentures.

[The rheology properties of common hydrophilic gel excipients].

To investigate theological properties of common hydrophilic gel excipients such as Carbopol based on viscosity, the viscosity was determined by rotation method and falling-ball method. Linear regression was made between ln(eta) and concentration, the slope of which was used to explore the relation between viscosity and concentration of different excipients. The viscosity flow active energy (E(eta)) was calculated according to Arrhenius equation and was used to investigate the relation between viscosity and temperature of different excipients. The results showed that viscosities measured by two methods were consistent. Concentration of guargum (GG) and hydroxypropylmethyl cellulose (HPMC) solution had a great influence on the viscosity, k > 5; while concentration of polyvinylpyrrolidone-K30 (PVP-K30) and polyethylene glycol 6000 (PEG6000) exerted a less effect on viscosity, k < 0.2; viscosity flow active energy of different excipients were close, which ranged from 30 to 40 kJ x mol(-1). Therefore, theological properties study could provide the basis for application of excipients and establish a foundation for the research of relation between excipients structure, property and function.

Characterization of novel MSX1 variants causally associated with non-syndromic oligodontia in Chinese families.

BACKGROUND: MSX1 (OMIM #142983) is crucial to normal dental development, and variants in MSX1 are associated with dental anomalies. The objective of this study was to characterize the pathogenicity of novel MSX1 variants in Chinese families with non-syndromic oligodontia (NSO). METHODS: Genomic DNA was extracted from individuals representing 35 families with non-syndromic oligodontia and was analyzed by Sanger sequencing and whole-exome sequencing. Pathogenic variants were screened via analyses involving PolyPhen-2, Sorting-Intolerant from Tolerant, and MutationTaster, and conservative analysis of variants. Patterns of MSX1-related NSO were analyzed. MSX1 structural changes suggested functional consequences in vitro. RESULTS: Three previously unreported MSX1 heterozygous variants were identified: one insertion variant (c.576_577insTAG; p.Gln193*) and two missense variants (c. 871T>C; p.Tyr291His and c. 644A>C; p.Gln215Pro). Immunofluorescence analysis revealed abnormal subcellular localization of the p.Gln193* MSX1 variant. In addition, we found that these MSX1 variants likely lead to the loss of second premolars. CONCLUSION: Three novel MSX1 variants were identified in Chinese Han families with NSO, expanding the MSX1 variant spectrum and presenting a genetic origin for the pathogenesis detected in patients and their families.

[Evaluation of a modified maxillary protraction appliance for the treatment of patients with skeletal Class â ¢ malocclusion associated with crowding].

PURPOSE: To investigate the efficacy of a modified maxillary protraction appliance in patients of skeletal Class Ⅲ with crowding. METHODS: Forty patients with skeletal Class Ⅲ malocclusion were divided into two groups, with 20 patients in each group. The experimental group had molar in a neutral or distal relationship and applied a modified maxillary protraction appliance, while the control group had molar mesial relationship and applied a conventional maxillary protraction appliance. Lateral cephalometric radiographs were taken before and after treatment in both groups for comparison. SPSS 22.0 software package was used for data analysis. RESULTS: The angle measurements taken before and after treatment showed a significant increase in SNA, ANB, SN-MP and U4-SN(P＜0.01), while SNB decreased(P＜0.01) in both groups. SN-OL changes were statistically different before and after treatment in the experimental group(P＜0.05). The sagittal measurements before and after treatment in both groups showed significant alterations in all(P＜0.05) but the length of the maxillary arch in both groups. For vertical measurements, U1-PP, L1-MP, U4-SN, U6-SN, and ANS-ME all increased (P＜0.05), while the changes of U4-PP and U6-PP in the two groups before and after treatment were statistically different(P＜0.05). Compared with the control group, the experimental group had a significantly increased maxillary arch length, a more remote location at U6, and a less variable molar relationship after treatment(P＜0.01). The two groups showed a variable amount of cephalometric measurements before and after treatment: the experimental group had a significant increase in maxillary arch length, a more remote position at U6, and a smaller change in molar relationship compared to the control group(P＜0.01). CONCLUSIONS: The modified maxillary protraction appliance showed good results for maxillary protraction and pushing the molar distally in patients with skeletal Class Ⅲ with crowding at neutral or distal molar relationship.

CKIP-1-Loaded Cartilage-Affinitive Nanoliposomes Reverse Osteoarthritis by Restoring Chondrocyte Homeostasis.

Osteoarthritis (OA) is a chronic joint disease characterized by cartilage imbalance and disruption of cartilage extracellular matrix secretion. Identifying key genes that regulate cartilage differentiation and developing effective therapeutic strategies to restore their expression is crucial. In a previous study, we observed a significant correlation between the expression of the gene encoding casein kinase-2 interacting protein-1 (CKIP-1) in the cartilage of OA patients and OA severity scores, suggesting its potential involvement in OA development. To test this hypothesis, we synthesized a chondrocyte affinity plasmid, liposomes CKIP-1, to enhance CKIP-1 expression in chondrocytes. Our results demonstrated that injection of CAP-Lipos-CKIP-1 plasmid significantly improved OA joint destruction and restored joint motor function by enhancing cartilage extracellular matrix (ECM) secretion. Histological and cytological analyses confirmed that CKIP-1 maintains altered the phosphorylation of the signal transduction molecule SMAD2/3 of the transforming growth factor-ß (TGF-ß) pathway by promoting the phosphorylation of the 8T, 416S sit. Taken together, this work highlights a novel approach for the precise modulation of chondrocyte phenotype from an inflammatory to a noninflammatory state for the treatment of OA and may be broadly applicable to patients suffering from other arthritic diseases.

Genotype-phenotype pattern analysis of pathogenic PAX9 variants in Chinese Han families with non-syndromic oligodontia.

Background: Non-syndromic oligodontia is characterized by the absence of six or more permanent teeth, excluding third molars, and can have aesthetic, masticatory, and psychological consequences. Previous studies have shown that PAX9 is associated with autosomal dominant forms of oligodontia but the precise molecular mechanisms are still unknown. Methods: Whole-exome and Sanger sequencing were performed on a cohort of approximately 28 probands with NSO, for mutation analysis. Bioinformatic analysis was performed on the potential variants. Immunofluorescence assay, western blotting, and qPCR were used to explore the preliminary functional impact of the variant PAX9 proteins. We reviewed PAX9-related NSO articles in PubMed to analyze the genotype-phenotype correlations. Results: We identified three novel PAX9 variants in Chinese Han families: c.152G>T (p.Gly51Val), c.239delC (p.Thr82Profs*3), and c.409C>T (q.Gln137Ter). In addition, two previously reported missense variants were identified: c.140G>C (p.Arg47Pro) and c.146C>T (p.Ser49Leu) (reference sequence NM_006194.4). Structural modeling revealed that all missense variants were located in the highly conserved paired domain. The other variants led to premature termination of the protein, causing structural impairment of the PAX9 protein. Immunofluorescence assay showed abnormal subcellular localizations of the missense variants (R47P, S49L, and G51V). In human dental pulp stem cells, western blotting and qPCR showed decreased expression of PAX9 variants (c.140G>C, p.R47P, and c.152G>T, p.G51V) compared with the wild-type group at both the transcription and translation levels. A review of published papers identified 64 PAX9 variants related to NSO and found that the most dominant feature was the high incidence of missing upper second molars, first molars, second premolars, and lower second molars. Conclusion: Three novel PAX9 variants were identified in Chinese Han families with NSO. These results extend the variant spectrum of PAX9 and provide a foundation for genetic diagnosis and counseling.

Sequential Delivery of Quercetin and Paclitaxel for the Fibrotic Tumor Microenvironment Remodeling and Chemotherapy Potentiation via a Dual-Targeting Hybrid Micelle-in-Liposome System.

Cancer-associated fibroblasts (CAFs), an important type of stromal cells in the tumor microenvironment (TME), are responsible for creating physical barriers to drug delivery and penetration in tumor tissues. Thus, effectively downregulating CAFs to destroy the physical barrier may allow enhanced penetration and accumulation of therapeutic drugs, thereby improving therapeutic outcomes. Herein, a matrix metalloproteinase (MMP)-triggered dual-targeting hybrid micelle-in-liposome system (RPM@NLQ) was constructed to sequentially deliver quercetin (Que) and paclitaxel (PTX) for fibrotic TME remodeling and chemotherapy potentiation. Specifically, antifibrotic Que and small-sized RGD-modified micelles containing PTX (RPM) were co-encapsulated into MMP-sensitive liposomes, and the liposomes were further adorned with the NGR peptide (NL) as the targeting moiety. The resulting RPM@NLQ first specifically accumulated at the tumor site under the guidance of the NGR peptide after intravenous administration and then released Que and RPM in response to the extensive expression of MMP in the TME. Subsequently, Que was retained in the stroma to remarkably downregulate fibrosis and decrease the stromal barrier by downregulating Wnt16 expression in CAFs, which further resulted in a significant increase of RPM for deeper tumor. Thus, RPM could precisely target and kill breast cancer cells locally. Consequently, prolonged blood circulation, selective cascade targeting of tumor tissue and tumor cells, enhanced penetration, and excellent antitumor efficacy have been demonstrated in vitro and in vivo. In conclusion, as-designed sequential delivery systems for fibrotic TME remodeling and chemotherapy potentiation may provide a promising adjuvant therapeutic strategy for breast and other CAF-rich tumors.

A novel EDAR missense mutation identified by whole-exome sequencing with non-syndromic tooth agenesis in a Chinese family.

BACKGROUND: Causative variants in genes of the EDA/EDAR/NF-κB pathway, such as EDA and EDARADD, have been widely identified in patients with non-syndromic tooth agenesis (NSTA). However, few cases of NSTA are due to ectodysplasin-A receptor (EDAR) variants. In this study, we investigated NSTA-associated variants in Chinese families. METHODS: Peripheral blood samples were collected from the family members of 24 individuals with NSTA for DNA extraction. The coding region of the EDA gene of the 24 probands was amplified by PCR and sequenced to investigate new variants. Whole-exome sequencing and Sanger sequencing were then performed for probands without EDA variants detected by PCR. RESULTS: A novel missense variant EDAR c.338G>A (p.(Cys113Tyr)) was identified in one family. In addition, three known EDA variants (c.865C>T, c.866G>A, and c.1013C>T) were identified in three families. Genotype-phenotype correlation analysis of EDAR gene mutation showed that NSTA patients were most likely to lose the maxillary lateral incisors and the maxillary central incisors were the least affected. The phenotype of mutations at codon 289 of EDA in NSTA affected patients was characterized by lateral incisors loss, rarely affecting the maxillary first molars. CONCLUSION: A novel EDAR missense variant c.338G>A (p.(Cys113Tyr)) was identified in a family with NSTA, extending the mutation spectrum of the EDAR gene. Genotype-phenotype correlation analyses of EDAR and EDA mutations could help to improve disease status prediction in NSTA families.

[Study on degradation of protein of the edible birds' nest (Aerodramus) in vitro].

OBJECTIVE: To study the digestion of Bird's nest extract (BNE) in simulated gastric fluid (SGF) and simulated intestinal fluid (SIF). METHODS: BNE were prepared and digested at 37 degrees C in SGF/SIF. At intervals of 0, 1, 5, 10, 15, 30, 60 min,the samples were taken out. Protein contents were determined by the method of Bradford, and digestion of BNE in SGF/SIF was observed according to the results of polyacrylamide gel electrophoresis (SDS-PAGE). RESULTS: On SDS-PAGE,the crude BNE and the BNE in SGF/SIF gave different patterns, but all being rich in high molecular weight protein. After digestion in vitro, most of protein degraded to 40 kD below, but part of high molecular weight protein was stable, and a protein of 70 kD added. CONCLUSION: Most protein degraded to polypeptide, but there was anti-digest protein in the BNE, all being the high molecular weight protein. This suggested that the active component from BNE was probably exerted directly on human body.

Superior CKIP-1 sensitivity of orofacial bone-derived mesenchymal stem cells in proliferation and osteogenic differentiation compared to long bone-derived mesenchymal stem cells.

Maxillofacial bone defects caused by multiple factors, including congenital deformations and tumors, have become a research focus in the field of oral medicine. Bone tissue engineering is increasingly regarded as a potential approach for maxillofacial bone repair. Mesenchymal stem cells (MSCs) with different origins display various biological characteristics. The aim of the present study was to investigate the effects of casein kinase­2 interaction protein­1 (CKIP­1) on MSCs, including femoral bone marrow­derived MSCs (BMMSCs) and orofacial bone­derived MSCs (OMSCs), isolated from the femoral and orofacial bones of wild­type (WT) and CKIP­1 knockout (KO) mice. MSCs were isolated using collagenase II and the main biological characteristics, including proliferation, apoptosis and osteogenic differentiation, were investigated. Subcutaneous transplantation of MSCs in mice was also performed to assess ectopic bone formation. MTT and clone formation assay results indicated that cell proliferation in the KO group was increased compared with the WT group, and OMSCs exhibited significantly increased levels of proliferation compared with BMMSCs. However, the proportion of apoptotic cells was not significantly different between CKIP­1 KO OMSCs and BMMSCs. Furthermore, it was revealed that osteogenic differentiation was increased in CKIP­1 KO MSCs compared with WT MSCs, particularly in OMSCs. Consistent with the in vitro results, enhanced ectopic bone formation was observed in CKIP­1 KO mice compared with WT mice, particularly in OMSCs compared with BMMSCs. In conclusion, the present results indicated that OMSCs may have a superior sensitivity to CKIP­1 in promoting osteogenesis compared with BMMSCs; therefore, CKIP­1 KO in OMSCs may serve as an efficient strategy for maxillofacial bone repair.

Characterization of different biodegradable scaffolds in tissue engineering.

The aim of the present study was to compare the characteristics of acellular dermal matrix (ADM), small intestinal submucosa (SIS) and Bio­Gide scaffolds with acellular vascular matrix (ACVM)­0.25% human­like collagen I (HLC­I) scaffold in tissue engineering blood vessels. The ACVM­0.25% HLC­I scaffold was prepared and compared with ADM, SIS and Bio­Gide scaffolds via hematoxylin and eosin (H&E) staining, Masson staining and scanning electron microscope (SEM) observations. Primary human gingival fibroblasts (HGFs) were cultured and identified. Then, the experiment was established via the seeding of HGFs on different scaffolds for 1, 4 and 7 days. The compatibility of four different scaffolds with HGFs was evaluated by H&E staining, SEM observation and Cell Counting Kit­8 assay. Then, a series of experiments were conducted to evaluate water absorption capacities, mechanical abilities, the ultra­microstructure and the cytotoxicity of the four scaffolds. The ACVM­0.25% HLC­I scaffold was revealed to exhibit the best cell proliferation and good cell architecture. ADM and Bio­Gide scaffolds exhibited good mechanical stability but cell proliferation was reduced when compared with the ACVM­0.25% HLC­I scaffold. In addition, SIS scaffolds exhibited the worst cell proliferation. The ACVM­0.25% HLC­I scaffold exhibited the best water absorption, followed by the SIS and Bio­Gide scaffolds, and then the ADM scaffold. In conclusion, the ACVM­0.25% HLC­I scaffold has good mechanical properties as a tissue engineering scaffold and the present results suggest that it has better biological characterization when compared with other scaffold types.

Stabilization and encapsulation of a staphylokinase variant (K35R) into poly(lactic-co-glycolic acid) microspheres.

The aim of this study is to prepare poly(lactic-co-glycolic acid) (PLGA) microspheres containing a staphylokinase variant K35R (DGR) with purpose of preserving the protein stability during both encapsulation and drug release. DGR-loaded microspheres are fabricated using a double-emulsion solvent extraction technique. Prior to encapsulation, the effect of ultrasonication emulsification of DGR solutions with methylene chloride on protein recovery was investigated. Moderate ultrasonic treatment of aqueous DGR/dichloromethane mixtures caused approximately 84% DGR aggregation. Polyvinyl alcohol (PVA) added into aqueous DGR solutions significantly improved DGR recovery to >90%. The effects of co-encapsulated PVA and NaCl in the external aqueous phase on the characteristics of the microspheres were investigated. When 2% PVA was co-encapsulated and 2.5% NaCl was added to the external water phase, DGR encapsulation efficiency was significantly increased from 7.1% to 78.1% and DGR was distributed uniformly throughout the microspheres. In vitro release test showed that DGR was released from PLGA microspheres in a sustained manner over 15 days. A large amount of released DGR was inactive in the absence of co-encapsulated PVA. On the contrary, when 2% PVA was co-encapsulated, the released DGR was almost completely intact within 9 days. In conclusion, PLGA microspheres can be an effective carrier for DGR and form a promising depot system.

Preparation and characterization of PLGA microspheres containing a staphylokinase variant (K35R).

AIM: To produce poly (lactic-co-glycolic acid) (PLGA) microspheres, containing a staphylokinase variant (K35R, DGR) with reduced immunogenecity and antiplatelet aggregation activities, which allowed the preservation of protein stability during both particle processing and drug release. METHODS: DGR-loaded microspheres were fabricated using a double emulsion-solvent evaporation technique. The effects of preparative parameters, such as stirring rate, polymer concentration, and the excipients of both internal and external aqueous phase (W2), on DGR encapsulation efficiency and microsphere characteristics were investigated. In vitro and in vivo release of DGR were conducted and the cause for instability of DGR during release was also investigated. RESULTS: Moderate ultrasonic treatment of aqueous DGR/dichloromethane mixtures caused approximately. Eighty four per cent DGR denaturation. However, the activity recovery of DGR almost amounted to 100% when 2% polyvinyl alcohol (PVA) was addled into the aqueous phase. It was found that NaCl in the external water phase significantly increased DGR encapsulation efficiency. Furthermore, NaCl in the external water phase played a role in determining size and surface morphology of microsphere. In vitro release test showed a burst release of DGR from microspheres, followed by sustained release of 50% total activity over 15 days. In vivo experiments showed that DGR released from microspheres sustained 5 days. Denaturation of DGR within microspheres might be resulted from acidic microclimate. CONCLUSION: The stability of DGR was effectively protected during microencapsulation and a relatively high encapsulation efficiency of DGR was obtained. PLGA microspheres could be an effective carrier for DGR.

[FTIR characterization of the secondary structure of a staphylokinase variant (K35R) encapsulated within PLGA microspheres].

The secondary structure of a staphylokinase variant (K35R, DGR) encapsulated in poly (lactic-co-glycolic acid) (PLGA) microspheres was quantitatively examined by Fourier transform infrared (FTIR) spectroscopy. Resolution enhancement technique and Fourier deconvolution were combined with band with curve-fitting procedures to quantitate the spectral information from the amide I bands. Nine component bands were found under the broad, nearly featureless amide I bands and assigned to alpha-helix, beta-sheet, turn and irregular (random) structures. The changes of bands at 1 651 and 1 623 cm(-1) after encapsulation were discussed.

[In vitro study of platelet glycoprotein monoclonal antibody eluting stents].

In order to prove the feasibility of preparation of the drug-incorporated stent by immersing stent wires in the monoclonal antibody (mAb) solution, fluorescence stain and image analysis were used to evaluate the L-PLA-coated stent. Absorption was measured using a radioisotope technique after preparing the mAb-incorporated stent, and the absorption curve was determined from the absorption data. In an in vitro perfusion circuit, the antibody was eluted from the stent matrices, and the related influence factors were evaluated based on the release data.

Anticoagulation and endothelial cell behaviors of heparin-loaded graphene oxide coating on titanium surface.

Owing to its unique physical and chemical properties, graphene oxide (GO) has attracted tremendous interest in many fields including biomaterials and biomedicine. The purpose of the present study is to investigate the endothelial cell behaviors and anticoagulation of heparin-loaded GO coating on the titanium surface. To this end, the titanium surface was firstly covered by the polydopamine coating followed by the deposition of the GO coating. Heparin was finally loaded on the GO coating to improve the blood compatibility. The results of attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR), Raman spectroscopy and X-ray photoelectron spectroscopy (XPS) indicated that the heparin-loaded GO coating was successfully created on the titanium surface. The scanning electron microscopy (SEM) images indicated that a relative uniform GO coating consisting of multilayer GO sheets was formed on the substrate. The hydrophilicity of the titanium surface was enhanced after the deposition of GO and further improved significantly by the loading heparin. The GO coating can enhance the endothelial cell adhesion and proliferation as compared with polydopamine coating and the blank titanium. Loading heparin on the GO coating can significantly reduce the platelet adhesion and prolong the activated partial thromboplastin time (APTT) while not influence the endothelial cell adhesion and proliferation. Therefore, the heparin-loaded GO coating can simultaneously enhance the cytocompatibility to endothelial cells and blood compatibility of biomaterials. Because the polydopamine coating can be easily prepared on most of biomaterials including polymer, ceramics and metal, thus the approach of the present study may open up a new window of promising an effective and efficient way to promote endothelialization and improve the blood compatibility of blood-contact biomedical devices such as intravascular stents.

Effects of self-assembly of 3-phosphonopropionic acid, 3-aminopropyltrimethoxysilane and dopamine on the corrosion behaviors and biocompatibility of a magnesium alloy.

Magnesium based alloys are attracting tremendous interests as the novel biodegradable metallic biomaterials. However, the rapid in vivo degradation and the limited surface biocompatibility restrict their clinical applications. Surface modification represents one of the important approaches to control the corrosion rate of Mg based alloys and to enhance the biocompatibility. In the present study, in order to improve the corrosion resistance and surface biocompatibility, magnesium alloy (AZ31B) was modified by the alkali heating treatment followed by the self-assembly of 3-phosphonopropionic acid, 3-aminopropyltrimethoxysilane (APTMS) and dopamine, respectively. The results of attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR) and X-ray photoelectron spectra (XPS) indicated that the molecules were successfully immobilized on the magnesium alloy surface by the self-assembly. An excellent hydrophilic surface was obtained after the alkali heating treatment and the water contact angle increased to some degree after the self-assembly of dopamine, APTMS and 3-phosphonopropionic acid, however, the hydrophilicity of the modified samples was better than that of the pristine magnesium substrate. Due to the formation of the passivation layer after the alkali heating treatment, the corrosion resistance of the magnesium alloy was obviously improved. The corrosion rate further decreased to varying degrees after the self-assembly surface modification. The blood compatibility of the pristine magnesium was significantly improved after the surface modification. The hemolysis rate was reduced from 56% of the blank magnesium alloy to 18% of the alkali heating treated sample and the values were further reduced to about 10% of dopamine-modified sample and 7% of APTMS-modified sample. The hemolysis rate was below 5% for the 3-phosphonopropionic acid modified sample. As compared to the pristine magnesium alloy, fewer platelets were attached and activated on the modified surfaces and the activated partial thromboplastin times (APTT) were prolonged to some degree. Furthermore, the modified samples showed good cytocompatibility. Endothelial cells exhibited the improved proliferative profiles in terms of CCK-8 assay as compared to those on the pristine magnesium alloy. The modified samples showed better endothelial cell adhesion and spreading than the pristine magnesium alloy. Taking all these results into consideration, the method of this study can be used to modify the magnesium alloy surface to improve the corrosion resistance and biocompatibility simultaneously.