Yap and Taz play a crucial role in neural crest-derived craniofacial development.

The role of the Hippo signaling pathway in cranial neural crest (CNC) development is poorly understood. We used the Wnt1(Cre) and Wnt1(Cre2SOR) drivers to conditionally ablate both Yap and Taz in the CNC of mice. When using either Cre driver, Yap and Taz deficiency in the CNC resulted in enlarged, hemorrhaging branchial arch blood vessels and hydrocephalus. However, Wnt1(Cre2SOR) mutants had an open cranial neural tube phenotype that was not evident in Wnt1(Cre) mutants. In O9-1 CNC cells, the loss of Yap impaired smooth muscle cell differentiation. RNA-sequencing data indicated that Yap and Taz regulate genes encoding Fox transcription factors, specifically Foxc1. Proliferation was reduced in the branchial arch mesenchyme of Yap and Taz CNC conditional knockout (CKO) embryos. Moreover, Yap and Taz CKO embryos had cerebellar aplasia similar to Dandy-Walker spectrum malformations observed in human patients and mouse embryos with mutations in Foxc1. In embryos and O9-1 cells deficient for Yap and Taz, Foxc1 expression was significantly reduced. Analysis of Foxc1 regulatory regions revealed a conserved recognition element for the Yap and Taz DNA binding co-factor Tead. ChIP-PCR experiments supported the conclusion that Foxc1 is directly regulated by the Yap-Tead complex. Our findings uncover important roles for Yap and Taz in CNC diversification and development.

Comparative embryology of Delphinapterus leucas (beluga whale), Balaena mysticetus (bowhead whale), and Stenella attenuata (pan-tropical spotted dolphin) (Cetacea: Mammalia).

Embryogenesis of cetaceans (whales, dolphins, porpoises) is best known in Stenella attenuata, the pan-tropical spotted dolphin, based on a remarkably complete and well-studied prenatal ontogenetic series. Our study expands understanding of cetacean embryology by adding two additional cetacean taxa: the beluga whale (Delphinapterus leucas, Odontoceti), and the bowhead whale (Balaena mysticetus, Mysticeti). We identify key features that characterize these taxa at specific stages and highlight heterochrony between the odontocetes and mysticetes. The toothed whales are more similar in developmental timing to each other than either is to Balaena. The two odontocete taxa, Stenella and Delphinapterus, share similar developmental trajectories while early Balaena specimens differ from the odontocetes. This developmental variation proves challenging to ascribe to the existing Carnegie staging system. Most notably, flippers, hindlimbs, and flukes all provide morphological traits for characterization within the Carnegie staging system. A presomitic Delphinapterus embryo is also described. This study applies the Carnegie staging system to two more cetacean taxa and forms a framework for future research on cetacean developmental genetics and the modeling of fetal growth.

A bioresponsive hydrogel tuned to chondrogenesis of human mesenchymal stem cells.

Cartilage tissue engineering aims to replace damaged or diseased tissue with a functional regenerate that restores joint function. Scaffolds are used to deliver cells and facilitate tissue development, but they can also interfere with the structural assembly of the cartilage matrix. Biodegradable scaffolds have been proposed as a means to improve matrix deposition and the biomechanical properties of neocartilage. The challenge is designing scaffolds with appropriate degradation rates, ideally such that scaffold degradation is proportional to matrix deposition. In this study, we developed a bioresponsive hydrogel with cell-mediated degradation aligned to the chondrogenic differentiation of human mesenchymal stem cells (hMSCs). We identified matrix metalloproteinase 7 (MMP7) as an enzyme with a temporal expression pattern that corresponded with cartilage development. By embedding MMP7 peptide substrates within a poly(ethylene glycol) diacrylate backbone, we built MMP7-sensitive hydrogels with distinct degradation rates. When MMP7-sensitive scaffolds were compared with nondegradable scaffolds in vitro, photoencapsulated hMSCs produced neocartilage constructs with more extensive collagenous matrices, as demonstrated through immunohistochemistry and biochemical quantification of matrix molecules. Furthermore, these changes translated into an increased dynamic compressive modulus. This work presents a practical strategy for designing biomaterials uniquely tuned to individual biological processes.

Angiogenesis, Osseointegration, and Antibacterial Applications of Polyelectrolyte Multilayer Coatings Incorporated With Silver/Strontium Containing Mesoporous Bioactive Glass on 316L Stainless Steel.

The main causes for failure in implant surgery are prolonged exposure of implants or wound and tissue ischemia. Bacterial infection caused by the surrounding medical environment and equipment is also a major risk factor. The medical risk would be greatly reduced if we could develop an implant coating to guide tissue growth and promote antibacterial activity. Mesoporous bioactive glasses are mainly silicates with good osteoinductivity and have been used in medical dentistry and orthopedics for several decades. Strontium ions and silver ions could plausibly be incorporated into bioactive glass to achieve the required function. Strontium ions are trace elements in human bone that have been proposed to promote osseointegration and angiogenesis. Silver ions can cause bacterial apoptosis through surface charge imbalance after bonding to the cell membrane. In this study, functional polyelectrolyte multilayer (PEM) coatings were adhered to 316L stainless steel (SS) by spin coating. The multilayer film was composed of biocompatible and biodegradable collagen as a positively charged layer, γ-polyglutamic acid (γ-PGA) as a negatively charged layer. Chitosan was incorporated to the 11th positively charged layer as a stabilizing barrier. Spray pyrolysis prepared mesoporous bioactive glass incorporated with silver and strontium (AgSrMBG) was added to each negatively charged layer. The PEM/AgSrMBG coating was well hydrophilic with a contact angle of 37.09°, hardness of 0.29 ± 0.09 GPa, Young's modulus of 5.35 ± 1.55 GPa, and roughness of 374.78 ± 22.27 nm, as observed through nano-indention and white light interferometry. The coating's antibacterial activity was sustained for 1 month through the inhibition zone test, and was biocompatible with rat bone marrow mesenchymal stem cells (rBMSCs) and human umbilical vein endothelial cells (HUVECs), as observed in the MTT assay. There was more hydroxyapatite precipitation on the PEM/AgSrMBG surface after being soaked in simulated body fluid (SBF), as observed by scanning electron microscopy (SEM) and X-ray diffraction (XRD). In both in vitro and in vivo tests, the PEM/AgSrMBG coating promoted angiogenesis, osseointegration, and antibacterial activity due to the sustained release of silver and strontium ions.

Label-free dual sensing of DNA molecules using GaN nanowires.

We demonstrate a rationale for using GaN nanowires (GaNNWs) in label-free DNA-sensing using dual routes of electrochemical impedance spectroscopy (EIS) and photoluminescence (PL) measurements, employing a popular target DNA with anthrax lethal factor (LF) sequence. The in situ EIS reveals that both high surface area and surface band-bending in the nanowires, providing more binding sites and surface-enhanced charge transfer, respectively, are responsible for the enhanced sensitivity to surface-immobilized DNA molecules. The net electron-transfer resistance can be readily deconvoluted into two components because of the coexistence of two interfaces, GaN/DNA and DNA/electrolyte interfaces, in series. Interestingly, the former, decreasing with LF concentration (C(LF)), serves as a signature for the extent of hybridization, while the latter as a fingerprint for DNA modification. For PL-sensing, the band-edge emission of GaNNWs serves as a parameter for DNA modification, which quenches exponentially with C(LF) as the incident light is increasingly blocked from reaching the core nanowire by rapidly developing a UV-absorbing DNA sheath at high C(LF). Furthermore, successful application for detection of "hotspot" mutations, related to the human p53 tumor-suppressor gene, revealed excellent selectivity and specificity, down to picomolar concentration, even in the current unoptimized sensor design/condition, and in the presence of mutations and noncomplementary strands, suggesting the potential pragmatic application in complex clinical samples.

Cathepsin K-sensitive poly(ethylene glycol) hydrogels for degradation in response to bone resorption.

We propose a new strategy of biomaterial design to achieve selective cellular degradation by the incorporation of cathepsin K-degradable peptide sequences into a scaffold structure so that scaffold biodegradation can be induced at the end of the bone formation process. Poly(ethylene glycol) diacrylate (PEGDA) hydrogels were used as a model biomaterial system in this study. A cathepsin K-sensitive peptide, GGGMGPSGPWGGK (GPSG), was synthesized and modified with acryloyl-PEG-succinimidyl carbonate to produce a cross-linkable cathepsin K-sensitive polymer that can be used to form a hydrogel. Specificity of degradation of the GPSG hydrogels was tested with cathepsin K and proteinase K as a positive control, with both resulting in significant degradation compared to incubation with nonspecific collagenases over a 24-h time period. No degradation was observed when the hydrogels were incubated with plasmin or control buffers. Cell-induced degradation was evaluated by seeding differentiated MC3T3-E1 osteoblasts and RAW264.7 osteoclasts on GPSG hydrogels that were also modified with the cell adhesion peptide RGDS. Resulting surface features and resorption pits were analyzed by differential interference contrast (DIC) and fluorescent images obtained with confocal microscopy. Results from both analyses demonstrated that GPSG hydrogels can be degraded specifically in response to osteoclast attachment but not in response to osteoblasts. In summary, we have demonstrated that by incorporating a cathepsin K-sensitive peptide into a synthetic polymer structure, we can generate biomaterials that specifically respond to cues from the natural process of bone remodeling.