Adaptation mechanism of three Impatiens species to different habitats based on stem morphology, lignin and MYB4 gene.

BACKGROUND: Impatiens is an important genus with rich species of garden plants, and its distribution is extremely extensive, which is reflected in its diverse ecological environment. However, the specific mechanisms of Impatiens' adaptation to various environments and the mechanism related to lignin remain unclear. RESULTS: Three representative Impatiens species,Impatiens chlorosepala (wet, low degree of lignification), Impatiens uliginosa (aquatic, moderate degree of lignification) and Impatiens rubrostriata (terrestrial, high degree of lignification), were selected and analyzed for their anatomical structures, lignin content and composition, and lignin-related gene expression. There are significant differences in anatomical parameters among the stems of three Impatiens species, and the anatomical structure is consistent with the determination results of lignin content. Furthermore, the thickness of the xylem and cell walls, as well as the ratio of cell wall thickness to stem diameter have a strong correlation with lignin content. The anatomical structure and degree of lignification in Impatiens can be attributed to the plant's growth environment, morphology, and growth rate. Our analysis of lignin-related genes revealed a negative correlation between the MYB4 gene and lignin content. The MYB4 gene may control the lignin synthesis in Impatiens by controlling the structural genes involved in the lignin synthesis pathway, such as HCT, C3H, and COMT. Nonetheless, the regulation pathway differs between species of Impatiens. CONCLUSIONS: This study demonstrated consistency between the stem anatomy of Impatiens and the results obtained from lignin content and composition analyses. It is speculated that MYB4 negatively regulates the lignin synthesis in the stems of three Impatiens species by regulating the expression of structural genes, and its regulation mechanism appears to vary across different Impatiens species. This study analyses the variations among different Impatiens plants in diverse habitats, and can guide further molecular investigations of lignin biosynthesis in Impatiens.

A novel drug and gene co-delivery system based on Poly(epsilon-caprolactone)-Poly(ethylene glycol)-Poly(epsilon-caprolactone) grafted polyethyleneimine micelle.

In this paper, we prepared a novel cationic self-assembled micelle from poly(epsilon-caprolactone)-poly(ethyl glycol)-poly(epsilon-caprolactone) grafted polyethyleneimine (PCEC-g-PEI). The PCEC-g-PEI micelles, formed by self-assembly method, had mean particle size of ca. 82 nm and zeta potential of +22.5 mV at 37 degrees C, and could efficiently transfer pGFP into HEK293 cells in vitro. Meanwhile, as a model hydrophobic chemotherapeutic drug, honokiol was loaded into PCEC-g-PEI micelles by direct dissolution method assisted by ultrasonication. The honokiol loaded cationic PCEC-g-PEI micelles could effectively adsorb DNA onto its surface, while it could release honokiol in an extended period in vitro. This study demonstrated a novel DNA and hydrophobic chemotherapeutic drug co-delivery system.

Biodegradable thermosensitive injectable PEG-PCL-PEG hydrogel for bFGF antigen delivery to improve humoral immunity.

In this contribution, a biodegradable and injectable thermosensitive poly(ethylene glycol)-poly(epsilon-caprolactone)-poly(ethylene glycol) (PEG-PCL-PEG, PECE) hydrogel system was successfully prepared for basic fibroblastic growth factor (bFGF) antigen delivery. bFGF encapsulated PECE hydrogel system (bFGF-hydrogel) is an injectable free-flowing sol at ambient temperature, and forms a non-flowing gel at physiological temperature acting as antigen depot. Furthermore, the cytotoxicity results showed that the PECE hydrogel could be regarded as a safe carrier, and bFGF could be released from the hydrogel system in an extended period in vitro. Otherwise, the immunogenicity of bFGF was improved significantly after encapsulated into the hydrogel. Strong humoral immunity created by bFGF-hydrogel was maintained for more than 14 weeks. Therefore, the prepared bFGF loaded PECE hydrogel might have great potential as a novel vaccine adjuvant for protein antigen.

Thermoreversible gel-sol behavior of biodegradable PCL-PEG-PCL triblock copolymer in aqueous solutions.

A series of biodegradable PCL-PEG-PCL block copolymers were successfully synthesized by ring-opening polymerization of epsilon-caprolactone initiated by poly(ethylene glycol) (PEG), which were characterized by (1)H NMR, (13)C NMR, and FTIR. Their aqueous solution displayed special gel-sol transition behavior with temperature increasing from 4 to 100 degrees C, when the polymer concentration was above corresponding critical gel concentration (CGC). The gel-sol phase diagram was recorded using test tube inverting method and DSC method, which depended not only on chemical composition of copolymers, but also on heating history of copolymer's aqueous solution. As a result, the gel-sol transition temperature could be adjusted, which might be very useful for its application in biomedical fields such as injectable drug delivery system. And the typical shell-core structure of PCL-PEG-PCL micelles was introduced. The micelle-packing and partial crystallization might be the key gelation machanism for this gel-sol transition behavior of PCL-PEG-PCL aqueous solution.

Preparation and characterization of monomethoxy poly(ethylene glycol)-poly(ε-caprolactone) micelles for the solubilization and in vivo delivery of luteolin.

Luteolin (Lu) is one of the flavonoids with anticancer activity, but its poor water solubility limits its use clinically. In this work, we used monomethoxy poly(ethylene glycol)-poly(e-caprolactone) (MPEG-PCL) micelles to encapsulate Lu by a self-assembly method, creating a water-soluble Lu/MPEG-PCL micelle. These micelles had a mean particle size of 38.6 ± 0.6 nm (polydispersity index = 0.16 ± 0.02), encapsulation efficiency of 98.32% ± 1.12%, and drug loading of 3.93% ± 0.25%. Lu/MPEG-PCL micelles could slowly release Lu in vitro. Encapsulation of Lu in MPEG-PCL micelles improved the half-life (t½ ; 152.25 ± 49.92 versus [vs] 7.16 ± 1.23 minutes, P = 0.007), area under the curve (0-t) (2914.05 ± 445.17 vs 502.65 ± 140.12 mg/L/minute, P = 0.001), area under the curve (0-∞) (2989.03 ± 433.22 vs 503.81 ± 141.41 mg/L/minute, P = 0.001), and peak concentration (92.70 ± 11.61 vs 38.98 ± 7.73 mg/L, P = 0.003) of Lu when the drug was intravenously administered at a dose of 30 mg/kg in rats. Also, Lu/MPEG-PCL micelles maintained the cytotoxicity of Lu on 4T1 breast cancer cells (IC50 = 6.4 ± 2.30 µg/mL) and C-26 colon carcinoma cells (IC50 = 12.62 ± 2.17 µg/mL) in vitro. These data suggested that encapsulation of Lu into MPEG-PCL micelles created an aqueous formulation of Lu with potential anticancer effect.

Treating acute cystitis with biodegradable micelle-encapsulated quercetin.

Intravesical application of an anti-inflammatory drug is an efficient strategy for acute cystitis therapy. Quercetin (QU) is a potent anti-inflammatory agent; however, its poor water solubility restricts its clinical application. In an attempt to improve water solubility of QU, biodegradable monomethoxy poly(ethylene glycol)-poly(ɛ-caprolactone) (MPEG-PCL) micelles were used to encapsulate QU by self-assembly methods, creating QU/MPEG-PCL micelles. These QU/MPEG-PCL micelles with DL of 7% had a mean particle size of <34 nm, and could release QU for an extended period in vitro. The in vivo study indicated that intravesical application of MPEG-PCL micelles did not induce any toxicity to the bladder, and could efficiently deliver cargo to the bladder. Moreover, the therapeutic efficiency of intravesical administration of QU/MPEG-PCL micelles on acute cystitis was evaluated in vivo. Results indicated that QU/MPEG-PCL micelle treatment efficiently reduced the edema and inflammatory cell infiltration of the bladder in an Escherichia coli-induced acute cystitis model. These data suggested that MPEG-PCL micelle was a candidate intravesical drug carrier, and QU/MPEG-PCL micelles may have potential application in acute cystitis therapy.

Preparation and characterization of microporous poly(D,L-lactic acid) film for tissue engineering scaffold.

We prepared a series of microporous films based on poly(d,l-lactic acid) (PLA) via phase separation. According to scanning electron microscopy (SEM), a 3-dimensional foamy structure with multimicrometer scale pores on the air surface of film could be observed. As the morphology of PLA film could not be stabilized using solvent-nonsolvent phase separation, we investigated the effect of temperature, air movement, and concentration on the properties of microporous PLA films. The results show that when the temperature was 25°C in a vacuum, it was easy to prepare PLA film with micropores, and it was stable. As the relationship between the morphology and formation factors was clear and the morphology of the PLA film was controllable, we studied the PLA film's potential use for cell culture. SEM results showed that NIH3T3 cell could be adhered on the surface of film well after incubation for 2 days. Meanwhile, in vitro culture experiments revealed the great biocompatibility of the scaffold for adsorption and proliferation of fibroblasts.

Preparation and characterization of magnetic poly(epsilon-caprolactone)-poly(ethylene glycol)-poly(epsilon-caprolactone) microspheres.

In this article, nano-magnetite particles (ferrofluid, Fe3O4) were prepared by chemical co-deposition method. A series of biodegradable triblock poly(epsilon-caprolactone)-poly(ethylene glycol)-poly(epsilon-caprolactone) (PCL-PEG-PCL, PCEC) copolymers were synthesized by ring-opening polymerization method from epsilon-caprolactone (epsilon-CL) initiated by poly(ethylene glycol) diol (PEG) using stannous octoate as catalyst. And the magnetic PCEC composite microspheres were prepared by solvent diffusion method. The properties of the ferrofluid, PCEC copolymer, and magnetic PCEC microspheres were studied in detail by SEM, VSM, XRD, Malvern Laser Particle Sizer, 1H-NMR, GPC, and TG/DTG. Effects of macromolecular weight and concentration of polymer, and the time for ultrasound dispersion on properties of magnetic microspheres were also investigated. The obtained magnetic PCEC microspheres might have great potential application in targeted drug delivery system or cell separation.

One-step preparation of poly(epsilon-caprolactone)-poly(ethylene glycol)-poly(epsilon-caprolactone) nanoparticles for plasmid DNA delivery.

In this article, a kind of biodegradable poly(epsilon-caprolactone)-Poly(ethylene glycol)-poly(epsilon-caprolactone) (PCL-PEG-PCL, PCEC) copolymer was synthesized by ring-opening polymerization method. The PCEC nanoparticles were prepared at one-step by modified emulsion solvent evaporation method using CTAB as stabilizer. With increase in PCEC concentration, the particle size increased obviously, but zeta potential only increased slightly. The obtained cationic PCEC nanoparticle was employed to condense and adsorb DNA onto its surface. Plasmid GFP (pGFP) was used as model plasmid to evaluate the loading capacity of cationic PCEC nanoparticles in this work. The DNA/nanoparticles weight ratio at 1:16 induced almost neutral zeta potential of DNA-nanoparticles complex. At this time, the size of complex became abnormally large which implied aggregates formed. So DNA-nanoparticles weight ratio should be chosen carefully. The cationic PCEC nanoparticles had the capacity of condensing plasmid DNA into complex when the DNA/nanoparticles weight ratio was lower than 1:8, which was evidenced by gel retardation assay. In vitro release behavior of DNA/nanoparticle complexes was also studied here. The obtained cationic PCEC nanoparticles might have great potential application in DNA delivery.

Synthesis, characterization, and hydrolytic degradation behavior of a novel biodegradable pH-sensitive hydrogel based on polycaprolactone, methacrylic acid, and poly(ethylene glycol).

In this work, a new kind of biodegradable pH-sensitive hydrogel was successfully synthesized by UV-initiated free radical polymerization. The obtained hydrogel was characterized by (1)H NMR and FTIR. Swelling behavior in different aqueous media and pH responsivity of the hydrogels were studied in detail as well. With increase in pH from 1.2 to 7.2, swelling ratio of the hydrogel increased. The morphology was observed by scanning electron microscopy, and the hydrolytic degradation behavior was also investigated in this work.