Effects of the bass brushing method on dental plaque and pneumonia in older adults hospitalized with pneumonia after discharge: A randomized controlled trial.

AIM: The purpose of this pilot study was to evaluate the effects of the Bass brushing method on dental plaque and pneumonia in older adults hospitalized with pneumonia after discharge. BACKGROUND: Poor oral hygiene may lead to pneumonia. Complications of pneumonia in older adults can be life-threatening during hospitalization and after discharge. METHODS: Older adults hospitalized with pneumonia (n = 30) were randomly assigned to intervention (with the Bass brushing method; n = 15) or control (with usual care; n = 15) groups. Dental plaque index and pneumonia as detected on chest x-rays were evaluated prior to the intervention (baseline) and every month for six months after discharge. RESULTS: Participants in the intervention group experienced a sustained reduction in dental plaque from the fourth to the sixth months (p = .024; p = .025; p = .000, respectively) that was not found in the control group. There were no group differences in detected pneumonia throughout the follow-up period. Pneumonia as detected on the chest x-rays at baseline (p = .001) and dental plaque index (p = .021) were significant predictors of the risk of pneumonia across groups. CONCLUSIONS: The Bass brushing method is a simple and effective oral hygiene practice that reduces dental plaque in older adults hospitalized with pneumonia after discharge.

Miniaturized 3D-printed hand-operable dispersive sample pretreatment device with replaceable chitosan/polydopamine thin film metal sorbent for enhanced metal analysis.

To address the increasing demand for sensitive and selective sample preparation methods for metal analysis; preconcentration of intended analyte from complex sample matrices before analysis is required to improve the performance of analysis instruments. In this study, we have engineered a sustainable and portable syringe-based hand-operable three-dimensionally (3D) printed sample pretreatment apparatus equipped with a replaceable bio-based thin- film metal sorbent. This device effectively addresses the challenges of sample matrix interference in metal analysis. A metal sorbent film composed of chitosan (CS) and polydopamine (PDA) leveraged the diverse functional groups in the CS/PDA matrix to significantly enhance the extraction efficiency for various metals. Our approach demonstrated excellent analytical performance, with coefficients of determination (R2) of 0.9982 for copper (Cu) and 0.996 for chromium (Cr). The method achieved low limits of detection (LOD) of 0.3 µg L-1 for Cr and 0.7 µg L-1 for Cu. Precision and practicality assessments using actual urine samples yielded satisfactory relative standard deviations (RSD%) ranging from of 1.6 %-8.5 % for both metals, indicating minimal interference from the sample matrix. Moreover, our approach exhibited robust performance even after seven consecutive extraction and desorption cycles, highlighting its sustainability and practical applicability for laboratory and on-site sample pretreatment.

3D printing for surgical planning of canine oral and maxillofacial surgeries.

BACKGROUND: Advanced diagnostic imaging is an essential part of preoperative planning for oral and maxillofacial surgery in veterinary patients. 3-dimensional (3D) printed models and surgical guides generated from diagnostic imaging can provide a deeper understanding of the complex maxillofacial anatomy, including relevant spatial relationships. Additionally, patient-specific 3D printed models allow surgeons and trainees to better examine anatomical features through tactile and visuospatial feedback allowing for improved preoperative planning, intraoperative guidance, and enhanced trainee education. Furthermore, these models facilitate discussions with pet owners, allowing for improved owner understanding of pathology, and educated decision-making regarding treatment. CASE PRESENTATION: Our case series consists of three 3D printed models segmented from computed tomography (CT) and cone beam CT (CBCT) and fabricated via desktop vat polymerization for preoperative planning and intraoperative guidance for resection of maxillary osteosarcoma, mandibular reconstruction after mandibulectomy, and gap arthroplasty for temporomandibular joint ankylosis in dogs. CONCLUSIONS: We illustrate multiple benefits and indications for 3D printing in veterinary oral and maxillofacial surgery. 3D printed models facilitate the understanding of complex surgical anatomy, creating an opportunity to assess the spatial relationship of the relevant structures. It facilitates individualized surgical planning by allowing surgeons to tailor and augment the surgical plan by examining patient-specific anatomy and pathology. Surgical steps may also be simulated in advance, including planning of osteotomy lines, and pre-contouring of titanium plates for reconstruction. Additionally, a 3D printed model and surgical guide also serve as invaluable intraoperative reference and guidance. Furthermore, 3D printed models have the potential to improve veterinary resident and student training as well as pet owner understanding and communication regarding the condition of their pets, treatment plan and intended outcomes.

Using anti-malondialdehyde-modified peptide adduct autoantibodies in serum of taiwanese women to diagnose primary Sjogren's syndrome.

BACKGROUND: Sjogren's syndrome (SS) is a systemic autoimmune disease featured with a dry mouth and dry eyes. Several autoantibodies, including anti-SSA, anti-SSB, antinuclear antibodies can be detected in patients with SS. Oxidation-specific epitopes (OSEs) can be formed from malondialdehyde (MDA)-modified protein adducts and trigger chronic inflammation. In this study, our purposes were used serum levels of anti-MDA-modified peptide adducts autoantibodies to evaluate predictive performance by machine learning algorithms in primary Sjögren's syndrome (pSS) and assess the association between pSS and healthy controls. METHODS: Three novel MDA-modified peptide adducts, including immunoglobulin (Ig) gamma heavy chain 1 (IGHG1)102-131, complement factor H (CFAH)1045-1062, and Ig heavy constant alpha 1 (IGHA1)307-327 were identified and validated. Serum levels of protein, MDA-modified protein adducts, MDA, and autoantibodies recognizing unmodified peptides and MDA-modified peptide adducts were measured. Statistically significance in correlations and odds ratios (ORs) were estimated. RESULTS: The random forest classifier utilized autoantibodies combination composed of IgM anti-IGHG1102-131, IgM anti-IGHG1102-131 MDA and IgM anti-IGHA1307-327 achieved predictive performance as an accuracy of 88.0%, a sensitivity of 93.7%, and a specificity of 84.4% which may be as potential diagnostic biomarkers to differentiate patients with pSS from rheumatoid arthritis (RA), and secondary SS in RA and HCs. CONCLUSIONS: Our findings imply that low levels of IgA anti-IGHG1102-131 MDA (OR = 2.646), IgA anti-IGHG1102-131 (OR = 2.408), IgA anti-CFAH1045-1062 (OR = 2.571), and IgA anti-IGHA1307-327 (OR = 2.905) may denote developing risks of pSS, respectively.

Three-Dimensionally Printed Hyperelastic Bone Scaffolds Accelerate Bone Regeneration in Critical-Size Calvarial Bone Defects.

BACKGROUND: Autologous bone grafts remain the gold standard for craniofacial reconstruction despite limitations of donor-site availability and morbidity. A myriad of commercial bone substitutes and allografts are available, yet no product has gained widespread use because of inferior clinical outcomes. The ideal bone substitute is both osteoconductive and osteoinductive. Craniofacial reconstruction often involves irregular three-dimensional defects, which may benefit from malleable or customizable substrates. "Hyperelastic Bone" is a three-dimensionally printed synthetic scaffold, composed of 90% by weight hydroxyapatite and 10% by weight poly(lactic-co-glycolic acid), with inherent bioactivity and porosity to allow for tissue integration. This study examines the capacity of Hyperelastic Bone for bone regeneration in a critical-size calvarial defect. METHODS: Eight-millimeter calvarial defects in adult male Sprague-Dawley rats were treated with three-dimensionally printed Hyperelastic Bone, three-dimensionally printed Fluffy-poly(lactic-co-glycolic acid) without hydroxyapatite, autologous bone (positive control), or left untreated (negative control). Animals were euthanized at 8 or 12 weeks postoperatively and specimens were analyzed for new bone formation by cone beam computed tomography, micro-computed tomography, and histology. RESULTS: The mineralized bone volume-to-total tissue volume fractions for the Hyperelastic Bone cohort at 8 and 12 weeks were 74.2 percent and 64.5 percent of positive control bone volume/total tissue, respectively (p = 0.04). Fluffy-poly(lactic-co-glycolic acid) demonstrated little bone formation, similar to the negative control. Histologic analysis of Hyperelastic Bone scaffolds revealed fibrous tissue at 8 weeks, and new bone formation surrounding the scaffold struts by 12 weeks. CONCLUSION: Findings from our study suggest that Hyperelastic Bone grafts are effective for bone regeneration, with significant potential for clinical translation.