The bioaugmentation effect of microbial inoculants on humic acid formation during co-composting of bagasse and cow manure.

The effective degradation of recalcitrant lignocellulose has emerged as a bottleneck for the humification of compost, and strategies are required to improve the efficiency of bagasse composting. Bioaugmentation is a promising method for promoting compost maturation and improving the quality of final compost. In this study, the bioaugmentation effects of microbial inoculants on humic acid (HA) formation during lignocellulosic composting were explored. In the inoculated group, the maximum temperature was increased to 72.5 °C, and the phenol-protein condensation and Maillard humification pathways were enhanced, thus increasing the HA content by 43.85%. After inoculation, the intensity of the microbial community interactions increased, particularly for fungi (1.4-fold). Macrogenomic analysis revealed that inoculation enriched thermophilic bacteria and lignocellulose-degrading fungi and increased the activity of carbohydrate-active enzymes and related metabolic functions, which effectively disrupted the recalcitrant structure of lignocellulose to achieve a high humification degree. Spearman correlation analysis indicated that Stappia of the Proteobacteria phylum, Ilumatobacter of the Actinomycetes phylum, and eleven genera of Ascomycota were the main HA producers. This study provides new ideas for bagasse treatment and recycling and realizing the comprehensive use of resources.

Spiro Scaffold Chiral Organocatalyst of 3,2'-Pyrrolidinyl Spiro-oxindole Amine and Its Catalytic Evaluation in the Enantioselective Aldol Condensation between 3-(3-Hydroxy-1H-pyrazol-1-yl)-Oxindole and Paraformaldehyde.

The spiro scaffold chiral organocatalyst of 3,2'-pyrrolidinyl spiro-oxindole amine was successfully prepared from racemic spiro-oxindole amine using l-menthol as a chiral pool in 4 steps in 28%-40% overall yields with at least 99% ee in scale-up preparation, and its catalytic activity was evaluated in the enantioselective aldol condensation between 3-(3-hydroxy-1H-pyrazol-1-yl)-oxindole and paraformaldehyde. The spiro organocatalyst showed superior catalytic activity and selectivity compared with its counterparts, and most substrates offered good to excellent results with up to 96% yield in 96% ee.

[Discussion on traditional Chinese medicine properties of Myrtus communis leaves based on literature analysis and Chinese medicine theory].

Myrtus communis is a traditional medicinal aromatic plant in the Mediterranean. At present, the plant has been introduced and cultivated in the southern part of China, and it is mostly used for ornamental or cosmetic purposes. Based on literature analysis and the theory of Chinese medicine, we discussed the medicinal parts and properties of M. communis in this paper to provide a theoretical basis for exploring the medicinal value of M. communis and its compatibility with traditional Chinese medicines. Literatures were searched from Web of Science(core collection), PubMed, CNKI, VIP and Wanfang by using the set conditions as key words. Then the obtained literatures were screened and classified. Finally, a total of 376 articles were included, consisting of 44 reviews, 54 germplasm resources, 78 chemical researches, 48 studies on application, extraction, or quality, 18 human trials, 132 pharmacological studies, and 2 safety studies. Based on literature analysis and theories of Chinese medicine, the leaves of M. communis were finally selected as the medicinal part of Chinese medicine, and the traditional Chinese medicine properties of M. communis leaves were deduced as pungent, bitter, and cool. The channel tropisms of M. communis leaves included lung, liver, and large intestine, with functions of detoxifying, resolving a mass, and insecticide. It was used for mouth sores, vaginal itching, hemorrhoids and warts, etc.; appropriate amount shall be applied for external use, and the decoction form shall be used for washing the affected parts; 3-12 g equivalent product shall be used in decoction, and this herb shall be put into the decoction in a later stage. The clarification of the medicinal parts of M. communis, and the determination of the Chinese medicine properties of M. communis leaves would lay a theoretical foundation for its compatibility and application with Chinese medicines, and can do more contribution to the medical and healthcare industry in our country.

Fe3O4/PVDF catalytic membrane treatment organic wastewater with simultaneously improved permeability, catalytic property and anti-fouling.

Fe3O4/Polyvinylidene fluoride (PVDF) three-channel hollow fiber catalytic membrane was successfully fabricated via non-solvent induced phase inversion and used for organic wastewater degradation in this work. The effects of Fe3O4 nanoparticles addition on the surface and cross-section morphologies, hydrophilicity and thermal properties of the catalytic membrane were characterized by the field emission scanning electron microscopy (SEM), water contact angle and thermogravimetric analysis (TGA), respectively. The obtained catalytic membrane exhibited good hydrophilicity, a high pure water flux of 175.8 L m-2 h-1 and a high removal of methylene blue (up to 97.6%) with Fenton catalytic reaction. Meanwhile, the catalytic membrane shows excellent anti-fouling property due to the presence of Fenton reaction. Our results show that Fe3O4/PVDF three-channel hollow fiber catalytic membrane was a promising alternative for the degradation of organic contaminants.

Highly Efficient Glioma Targeting of Tat Peptide-TTA1 Aptamer-Polyephylene Glycol-Modified Gelatin-Siloxane Nanoparticles.

Gliomas are the most common type of intracranial malignant tumor; however, current treatment approaches are often ineffective due to limited penetration of genes or drugs through the blood-brain barrier (BBB). Here we describe the synthesis of gelatin-siloxane nanoparticles (GS NPs) as candidate gene carriers through a two-step sol-gel process. To increase the efficiency of glioma targeting, human immunodeficiency virus-derived Tat, tumor-targeting aptamer (TTA)1, and polyethylene glycol (PEG) were conjugated to the GS NPs to generate Tat-TTA1-PEG-GS NPs. In vivo imaging revealed that these modified NPs not only evaded capture by the reticulo-endothelial system, but were able to cross the BBB to reach gliomas. Our results suggest that Tat-TTA1-PEG-GS NPs are a new type of non-viral vector that can deliver therapeutic DNA or drugs for highly efficient glioma treatment.

Endoscopy-Assisted Transoral Versus Endoscopy-Assisted Transcervical Minimal Incision Plus Mandibular Osteotomy Approach in Resection of Large Parapharyngeal Space Tumors.

BACKGROUND: Resection of the parapharyngeal space is often challenging. This study aims to evaluate the outcome of the endoscopy-assisted transoral approach for resection of the parapharyngeal space tumors compared with the endoscopy-assisted transcervical approach. METHODS: Twenty-three consecutive patients (15 males, 8 females) who underwent resection of large parapharyngeal space tumors via endoscopy-assisted transoral (ETO) approach or endoscopy-assisted transcervical minimal incision plus osteotomy of the vertical ramus outside the mandibular foramen (ETC + MO) approach were analyzed retrospectively. RESULTS: The tumors in ETO group are benign; there are 2 patients with adenoid cystic carcinoma and 1 patient with recurrent pleomorphic adenoma in ETC + MO group. All of the tumors were removed completely and without rupture. No major complications developed in any patient. Temporary facial paresis occurred in 1 patient in the ETC + MO group, which resolved spontaneously within 8 weeks. The cosmetic effects of all patients in ETO groups and 10 patients in ETC + MO groups were excellent. Patients were followed up for 7 to 26 months, no recurrence was encountered. CONCLUSION: ETO and ETC + MO approach in resection of large parapharyngeal space tumors are feasible and safe technique that achieve excellent aesthetic and functional results. Endoscopy-assisted transoral approach can shorten hospitalized time and avoid the risk of marginal mandibular nerve injury and ETC + MO approach may be used in malignant or recurrent parapharyngeal space tumors.

Dysphagia in Tongue Cancer Patients Before and After Surgery.

PURPOSE: To define factors influencing postoperative aspiration in tongue cancer patients and to analyze the characteristics of dysphagia before and after surgery. MATERIALS AND METHODS: A total of 112 tongue cancer patients participated in this work. Videofluoroscopic swallowing studies were performed in all patients before and after surgery. A Penetration-Aspiration Scale score of 3 or greater was defined as an aspiration risk. Qualitative data were collected on a frame-by-frame basis from each videofluoroscopic swallowing study and analyzed. RESULTS: Smoking (58.14%, P < .01), tongue resection greater than 50% (38.71%, P < .05), and advanced tumor stage (49.18%, P < .01) were strong risk factors for aspiration. High incidences of inadequate tongue movement, delayed oral transit time, reduced hyoid bone elevation, poor aspiration or penetration, vallecula epiglottica, and residual material in the pyriform sinuses were evident after surgery (all P < .001). The Penetration-Aspiration Scale score was significantly higher after surgery than before surgery. The incidence of silent aspiration increased to 6.25% postoperatively. CONCLUSIONS: Smoking, larger tongue resection, and advanced tumor stage were strong risk factors for postoperative aspiration and dysphagia complications in tongue cancer patients. The aspiration rate was higher after surgery. Further studies should focus on the prevention and early treatment of dysphagia, especially postoperative aspiration, in tongue cancer patients.

Novel method of fabricating individual trays for maxillectomy patients by computer-aided design and rapid prototyping.

PURPOSE: Making impressions for maxillectomy patients is an essential but difficult task. This study developed a novel method to fabricate individual trays by computer-aided design (CAD) and rapid prototyping (RP) to simplify the process and enhance patient safety. MATERIALS AND METHODS: Five unilateral maxillectomy patients were recruited for this study. For each patient, a computed tomography (CT) scan was taken. Based on the 3D surface reconstruction of the target area, an individual tray was manufactured by CAD/RP. With a conventional custom tray as control, two final impressions were made using the different types of tray for each patient. The trays were sectioned, and in each section the thickness of the material was measured at six evenly distributed points. Descriptive statistics and paired t-test were used to examine the difference of the impression thickness. SAS 9.3 was applied in the statistical analysis. Afterwards, all casts were then optically 3D scanned and compared digitally to evaluate the feasibility of this method. RESULTS: Impressions of all five maxillectomy patients were successfully made with individual trays fabricated by CAD/RP and traditional trays. The descriptive statistics of impression thickness measurement showed slightly more uneven results in the traditional trays, but no statistical significance was shown. A 3D digital comparison showed acceptable discrepancies within 1 mm in the majority of cast areas. The largest difference of 3 mm was observed in the buccal wall of the defective areas. Moderate deviations of 1 to 2 mm were detected in the buccal and labial vestibular groove areas. CONCLUSIONS: This study confirmed the feasibility of a novel method of fabricating individual trays by CAD/RP. Impressions made by individual trays manufactured using CAD/RP had a uniform thickness, with an acceptable level of accuracy compared to those made through conventional processes.

Effect on push-out bond strength of glass-fiber posts functionalized with polydopamine using different adhesives.

PURPOSE: To evaluate the push-out bond strengths of prefabricated glass-fiber posts (Beijing Oya Biomaterials) with polydopamine functionalized to root dentin using two different resin cements (Paracore and RelyX Unicem) in different root regions (cervical, middle, and apical). MATERIALS AND METHODS: Forty extracted human, single-rooted teeth were endodontically treated and a 9-mm post space was prepared in each tooth with post drills provided by the manufacturer. Specimens were then randomly assigned into four groups (n = 10 per group), depending on the adhesive system and post surface treatment used: group IA (Paracore + polydopamine); group IB (Paracore + control); group IIA (RelyX Unicem + polydopamine); group IIB (RelyX Unicem + control). Following post cementation, the specimens were stored in distilled water at 37°C for 7 days. The push-out test was performed using a universal testing machine (0.5 mm/ min), and the failure modes were examined with a stereomicroscope. Data were statistically analyzed using twoway ANOVA (p = 0.05). RESULTS: Bond strengths (mean ± SD) were: 7.909 ± 3.166 MPa (group IA), 4.675 ± 2.170 MPa (group IB), 8.186 ± 2.766 MPa (group IIA), 4.723 ± 2.084 MPa (group IIB). The bond strength of polydopamine groups was significantly higher than one of the control groups (p < 0.0001). No significant difference was found in the micro push-out bond strengths between the two resin cement groups or the root regions (p > 0.05). Stereomicroscopic analysis showed a higher percentage of adhesive than cohesive failures in all groups. CONCLUSION: Surface polydopamine functionalization was confirmed to be a reliable method for improving the bond strength of resin luting agents to fiber posts. The bond strength of Paracore to fiber posts was not significantly different from that of RelyX Unicem, and considering its convenient application, Paracore can be recommended.

A biodegradable PVA coating constructed on the surface of the implant for preventing bacterial colonization and biofilm formation.

BACKGROUND: Bone implant infections pose a critical challenge in orthopedic surgery, often leading to implant failure. The potential of implant coatings to deter infections by hindering biofilm formation is promising. However, a shortage of cost-effective, efficient, and clinically suitable coatings persists. Polyvinyl alcohol (PVA), a prevalent biomaterial, possesses inherent hydrophilicity, offering potential antibacterial properties. METHODS: This study investigates the PVA solution's capacity to shield implants from bacterial adhesion, suppress bacterial proliferation, and thwart biofilm development. PVA solutions at concentrations of 5%, 10%, 15%, and 20% were prepared. In vitro assessments evaluated PVA's ability to impede bacterial growth and biofilm formation. The interaction between PVA and mCherry-labeled Escherichia coli (E. coli) was scrutinized, along with PVA's therapeutic effects in a rat osteomyelitis model. RESULTS: The PVA solution effectively restrained bacterial proliferation and biofilm formation on titanium implants. PVA solution had no substantial impact on the activity or osteogenic potential of MC3T3-E1 cells. Post-operatively, the PVA solution markedly reduced the number of Staphylococcus aureus and E. coli colonies surrounding the implant. Imaging and histological scores exhibited significant improvements 2 weeks post-operation. Additionally, no abnormalities were detected in the internal organs of PVA-treated rats. CONCLUSIONS: PVA solution emerges as an economical, uncomplicated, and effective coating material for inhibiting bacterial replication and biofilm formation on implant surfaces, even in high-contamination surgical environments.

Polyethylene glycol crosslinked modified chitosan/halloysite nanotube composite aerogel microspheres for efficient adsorption of melanoidin.

Melanoidins are widely present in molasses wastewater and are dark-colored macromolecules that are hazardous to the environment. Currently, adsorption methods can effectively remove melanoidins from wastewater. However, existing adsorbents have shown unsatisfactory removal efficiency for melanoidins, making practical application challenging. Polyethylene glycol crosslinked modified chitosan/halloysite nanotube composite aerogel microspheres (PCAM@HNTs) were developed as a highly efficient adsorbent for melanoidins. The removal rate of PCAM@HNTs for melanoidins was 98.53 % at adsorbent dosage 0.4 mg/mL, pH 7, temperature 303 K and 450 mg/L initial melanoidins concentration, and the corresponding equilibrium adsorption capacity was 1108.49 mg/g. The analysis results indicate that the adsorption of melanoidins by PCAM@HNTs is a spontaneous and endothermic process. It fits well with pseudo-second-order kinetic models and the Freundlich isotherm equation. The adsorption of PCAM@HNT on melanoidins is primarily attributed to electrostatic and hydrogen bonding interactions. Furthermore, PCAM@HNTs exhibit excellent biocompatibility and are nonhazardous. Therefore, PCAM@HNTs proved to be an ideal adsorbent for the decolorization of molasses wastewater.

A novel fluoropolymer as a protein delivery vector with robust adjuvant effect for cancer immunotherapy.

The inefficient treatment using protein-based nanovaccines is largely attributed to their inadequate immunogenicity. Herein, we developed a novel fluoropolymer (PF) via ring-opening polymerization and constructed a fluoropolymer-based nanovaccine for tumor immunotherapy. Due to the existence of fluoroalkyl chains, PF not only played a crucial role in tumor antigen delivery but also exhibited a remarkable adjuvant effect in enhancing the immunogenicity of nanovaccines. The nanovaccines formed by mixing PF with a model antigen ovalbumin (OVA) enhanced the uptake of antigen proteins by dendritic cells (DCs) and promoted the maturation and antigen presentation of DCs. Compared with free OVA, PF/OVA showed better efficacy in both pre-cancer prevention and tumor treatment. Furthermore, the proportion of CD4+ T and CD8+ T cells was significantly increased in lymph nodes and tumors of mice immunized with PF/OVA. Additionally, there was a great enhancement in the levels of key anti-tumor cytokines (TNF-α and IFN-γ) in the serum of the PF/OVA immunized mice. Our research has shown that fluoropolymer PF applied as a protein vector and adjuvant has great potential for the development of nanovaccines with robust immunogenicity.

[Technical study of vinpocetine micelles prepared by thin-film hydration method].

OBJECTIVE: To prepare PEG-PLA polymeric micelles loaded with vinpocetine (VP). METHODS: VP micelles were prepared by thin-film hydration method, single factors affecting drug loading content, encapsulation efficiency, productivity, particle size and polydispersity index (PDI) such as dosage, type of organic solvent, quantity of organic solvent, hydration temperature, hydration speed, amount of hydration water, hydration time were investigated, and the optimum technology was obtained. The mean particle size and PDI were determined by DLS. The drug loading content, encapsulation efficiency, productivity of VP micelles were investigated by UV. RESULTS: The drug loading content and particle size of VP micelles were 20.35% and 118.3 nm, respectively. CONCLUSION: The technology of VP micelles prepared by thin-film hydration method is practical and simple. It's valuable to be further studied.

Efficacy and Safety of the Safe Triangular Working Zone Approach in Percutaneous Vertebroplasty for Spinal Metastasis.

OBJECTIVE: This study aimed to assess the technical feasibility, efficacy, and safety of the safe triangular working zone (STWZ) approach applied in percutaneous vertebroplasty (PV) for spinal metastases involving the posterior part of the vertebral body. MATERIALS AND METHODS: We prospectively enrolled 87 patients who underwent PV for spinal metastasis involving the posterior part of the vertebral body, with or without the STWZ approach, from January 2019 to April 2022. Forty-nine patients (27 females and 22 males; mean age ± standard deviation [SD], 57.2 ± 11.6 years; age range, 31-76 years) were included in group A (with STWZ approach), accounting for 54 vertebrae. Thirty-eight patients (18 females and 20 males; 59.1 ± 10.9 years; 29-81 years) were included in group B (without STWZ approach), accounting for 57 vertebrae. Patient demographics, procedure-related variables, and pain relief as assessed using the visual analog scale (VAS) were collected at different time points. Tumor recurrence in the vertebrae after PV was analyzed using Kaplan-Meier curves. RESULTS: The STWZ approach was successful from T1 to L5 without severe complications. Cement filling was satisfactory in 47/54 (87.0%) and 25/57 (43.9%) vertebrae in groups A and B, respectively (p < 0.001). Cement leakage was not significantly different between groups A and B (p = 1.000). Mean VAS score ± SD before and 1 week and 1, 3, 6, 9, and 12 months after PV were 7.6 ± 1.8, 4.2 ± 2.0, 2.7 ± 1.9, 1.9 ± 1.5, 1.7 ± 1.4, 1.7 ± 1.1, and 1.6 ± 1.3, respectively, in group A and 7.2 ± 1.7, 4.0 ± 1.3, 3.4 ± 1.6, 2.4 ± 1.2, 1.8 ± 1.0, 1.4 ± 0.5, and 1.7 ± 0.9, respectively, in group B. Kaplan-Meier analysis showed a lower tumor recurrence rate in group A than in group B (p = 0.001). CONCLUSION: The STWZ approach may represent a new, safe, alternative/auxiliary approach to target the posterior part of the vertebral body in the PV for spinal metastases.

Pharmacodynamic and pharmacokinetic study of pegylated liposomal doxorubicin combination (CCOP) chemotherapy in patients with peripheral T-cell lymphomas.

AIM: To investigate the pharmacodynamic and pharmacokinetic parameters of pegylated liposomal doxorubicin (PLD) combined with cyclophosphamide, vincristine, and prednisolone in patients with peripheral T-cell lymphomas (PTCL). METHODS: Seven chemonaive patients and four patients with relapsed peripheral T-cell lymphomas were treated with a CCOP regimen consisting of an intravenous administration of cyclophosphamide (750 mg/m(2)), vincristine (1.4 mg/m(2)), and PLD (30 mg/m(2)) on d 1, as well as an oral administration of prednisolone (60 mg/m(2)) on d 1-5. This regimen was repeated every 3 weeks for six cycles, and the clinical response and toxicity of the regimen were monitored. In addition, the plasma concentration of PLD at different time points was determined before and after treatment. The pharmacokinetics (PKs) software was used to estimate the pharmacokinetic parameters of PLD. RESULTS: The 11 PTCL patients received 35 treatment cycles. Three of them achieved complete response (CR), two partial response (PR), four stable disease (SD), and two progressive disease (PD). The overall response rate (ORR) was 45.5%, and the CR rate was 27.3%. In the 7 chemonaive patients, three achieved CR, two PR, one SD, and one PD. The ORR was 71.4%, and CR rate was 42.9%. The median follow-up time was 15 months, but 6 out of 11 patients were dead at the time of data analysis. The 1-year overall survival rate was 45.5%, and the median progression-free survival (PFS) rate was 6.5 [95% confidence interval (95% CI) 3.17-19.02] with a survival rate of 11.5 months (95% CI 6.65-16.36). The main toxicity was myelosuppression. Oral mucositis and hand-foot syndrome seldom occurred. The PLD plasma concentration from nine patients ranged from 1.7036 to 9.2207 mg·L(-1) after administration of the CCOP regimen (0-168 h). The pharmacokinetic parameters AUC(0-∞), CL, t(1/2), and V(d) were 910.76 mg/L·h, 0.043 L·h(-1)·m(-2), 68.40 h, and 3.56 L/m(2), respectively. CONCLUSION: The CCOP regimen was effective and well tolerated in patients with peripheral T-cell lymphomas. The results of the pharmacokinetic parameters showed that PLD had long retention time in blood circulation.

Antitumor activity studies of iridium (III) polypyridine complexes-loaded liposomes against gastric tumor cell in vitro.

Two iridium (III) polypyridine complexes [Ir(ppy)2(BIP)]PF6 (ppy = 2-phenylpyridine, BIP = 2-biphenyl-1H-imidazo[4,5-f][1,10]phenanthroline, Ir1), [Ir(piq)2(BIP)]PF6 (piq = 1-phenylisoquinoline, Ir2) and their liposomes Ir1lipo and Ir2lipo were synthesized and characterized. 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay was used to evaluate cytotoxic activity against several cancer cells (A549, HepG2, SGC-7901, Bel-7402, HeLa) and non-cancer cell (mouse embryonic fibroblast, NIH3T3). The results showed that Ir1lipo displays the high cytotoxicity toward SGC-7901 with IC50 value of 5.8 ± 0.2 µM, while the complexes have no cytotoxicity toward A549, HepG2, Bel-7402 and HeLa cells. The cell colony demonstrated that the iridium (III) complexes-loaded liposomes can inhibit cell proliferation, induce cell cycle arrest at G0/G1 phase. Moreover, they also cause autophagy, induce a decrease of mitochondrial membrane potential and increase intracellular reactive oxygen species (ROS) content. These results suggest that the complexes encapsulated liposomes Ir1lipo and Ir2lipo inhibit the growth of SGC-7901 cells through a ROS-mediated mitochondrial dysfunction and activating the PI3K (phosphoinositide-3 kinase)/ AKT (protein kinase B) signaling pathways.

Effective detection and separation method for G-quadruplex DNA based on its specific precipitation with Mg(2+).

G-quadruplex is a type of DNA secondary structure formed by specific guanine-rich sequences. Because of their enrichment in functional genomic regions and their biological significance, G-quadruplexes are recognized as significant drug targets for cancer and other diseases. Here, we tested the precipitation efficiency of Mg(2+) for various DNA oligomers, including single-stranded, double-stranded, triplex, hairpin, i-motif, and some reported G-quadruplex DNA. It was found that Mg(2+) could specifically recognize and precipitate G-quadruplex DNA with a particularly high efficiency of close to 100% for G-quadruplex structures with parallel conformation, which provided an inexpensive and convenient method for detecting and separating G-quadruplex DNA from other DNA structures as well as identifying parallel G-quadruplex from other conformational G-quadruplexes. Further experiments with both CD and gel electrophoresis validated the effectiveness of this approach. The structure of the precipitate was characterized using transmission electron microscopy (TEM), and the observed linear precipitate suggested that a polymerization of G-quadruplex DNA was formed through π-π stacking of end to end by the unique large aromatic surface of G-quadruplex.

Extended supraclavicular fasciocutaneous island flap based on the transverse cervical artery for head and neck reconstruction after cancer ablation.

PURPOSE: This clinical study assessed a pedicled supraclavicular fasciocutaneous island flap (SFIF) based on the transverse cervical artery that was extended to include shoulder skin for reconstructing the head and neck. PATIENTS AND METHODS: Pedicled SFIFs extended to include the shoulder skin based on the cutaneous feeder vessels and perforator vessels in the deep fascia of the transverse cervical artery were designed for 24 patients with defects of the head and neck after cancer ablation. Preoperative 3-dimensional computed tomographic angiography was performed in all patients. The patients consisted of 15 men and 9 women ranging in age from 24 to 73 years. RESULTS: The primary lesions included squamous cell carcinoma of the tongue, buccal mucosa, floor of the mouth, oropharynx, palate, and lower gingiva. Three-dimensional computed tomographic angiography showed that the transverse cervical artery arose from the thyrocervical trunk in 13 cases and from the subclavian artery in 11 cases. The diameter of the artery ranged from 0.15 to 0.24 cm. The size of flaps ranged from 4 × 8 cm to 6 × 12 cm, and the mean length of the vascular pedicle was approximately 18.5 cm. Of the flaps, 23 survived completely, for a success rate of 95.8%. Three patients underwent radiotherapy, and the follow-up period ranged from 3 to 12 months. One patient died of local tumor recurrence, and cervical recurrences developed in 3 patients. CONCLUSION: An SFIF extended to include the shoulder skin based on the cutaneous feeder vessels and perforator vessels in the deep fascia of the transverse cervical artery is a useful, viable option for defects of the head and neck after cancer ablation.

[Study on the enrichment and purification of total flavonoids in Schizonepeta tenuifolia by macroporous adsorption resin].

OBJECTIVE: To establish an optimum enrichment and purification process of total flavonoids in Schizonepeta tenuifolia by macroporous resins. METHODS: 9 kinds of resins were compared and the best one was chosen. Then the technique condition for separating and purifying total flavonoids from Schizonepeta tenuifolia was studied. RESULTS: HP-20 was selected for its excellent adsorption and desorption properties, 80% ethanol was found to be the best elution solution. The best result was based on the follows: pH value-6.0, feeding rate-2 BV/h,sample concentration-0.4 g/mL, the ratio of total flavonoids to HP-20 macroporous resin-133. 76 mg/g, elution flowing rate-4 BV/h, eluting agent amount-3 BV. Then the purity reached 74. 31% and the yield was 97.13%. CONCLUSION: The total flavonoids of Schizonepeta tenuifolia can be effectively purificated and separated by HP-20 macroporous resin.

Rapid detection of trace malachite green using a fluorescence probe based on signal amplification through electrostatic self-assembly of CdTe QDs and polystyrene microsphere.

A fluorescence probe was delicately designed for the detection of malachite green (MG) in water and fish samples. Through the electrostatic self-assembly of CdTe QDs on the surface of polystyrene (PS) microspheres, the fluorescence signal was amplified. After grafting molecularly imprinted film, the fluorescence probe of MIP@PS@CdTe was fabricated and applied to the detection of MG based on fluorescence quenching. The linear range of MG detection was 0.01-20 µmol L-1, and the detection limit was 4.7 nmol L-1 (3σ, n = 9) which was much lower than those of the previous reports. The recoveries of MG in aquaculture water and fish samples ranging from 87.6% to 105.4% illustrated that the detection by MIP@PS@CdTe probe was accurate and reliable.