The Effect of Bioactive Glass-Enhanced Orthodontic Bonding Resins on Prevention of Demineralization: A Systematic Review.

At present, bioactive glasses (BAGs) are demonstrating promising results in the remineralization of hard tissues. Their bioactive properties can potentially overcome the demineralization effect accompanying orthodontic treatment. This review aimed to evaluate the effectiveness of bioactive glass enhanced orthodontic bonding resins on enamel remineralization, in addition to their antibacterial, ion release and acid neutralization effect. Four databases (PubMed, MEDLINE, Web of Science and Scopus) were searched. Two hundred and fifty-one full-text articles were screened independently, out of which seven studies satisfied the inclusion criteria. Quality appraisal was performed by two independent reviewers. Methodologies used to assess the anti-demineralization effect included Micro-Computed Tomography, Polarized Light Microscopy and Hardness Testing (Knoop and Berkovich). All seven articles confirmed the superior remineralization effect of BAG orthodontic bonding resins compared to their non-BAG counterparts. A proportional relationship was proved between BAG concentrations and increased anti-demineralization effect. The addition of antibacterial agents to BAG does not necessarily improve its anti-demineralization effect. Although studies have confirmed the effectiveness of BAG orthodontic bonding resins on enamel remineralization, there was a degree of heterogeneity across studies due to the lack of an in vitro studies standardized protocol.

A Novel Dental Sealant Containing Dimethylaminohexadecyl Methacrylate Suppresses the Cariogenic Pathogenicity of Streptococcus mutans Biofilms.

Cariogenic oral biofilms are strongly linked to dental caries around dental sealants. Quaternary ammonium monomers copolymerized with dental resin systems have been increasingly explored for modulation of biofilm growth. Here, we investigated the effect of dimethylaminohexadecyl methacrylate (DMAHDM) on the cariogenic pathogenicity of Streptococcus mutans (S. mutans) biofilms. DMAHDM at 5 mass% was incorporated into a parental formulation containing 20 mass% nanoparticles of amorphous calcium phosphate (NACP). S. mutans biofilms were grown on the formulations, and biofilm inhibition and virulence properties were assessed. The tolerances to acid stress and hydrogen peroxide stress were also evaluated. Our findings suggest that incorporating 5% DMAHDM into 20% NACP-containing sealants (1) imparts a detrimental biological effect on S. mutans by reducing colony-forming unit counts, metabolic activity and exopolysaccharide synthesis; and (2) reduces overall acid production and tolerance to oxygen stress, two major virulence factors of this microorganism. These results provide a perspective on the value of integrating bioactive restorative materials with traditional caries management approaches in clinical practice. Contact-killing strategies via dental materials aiming to prevent or at least reduce high numbers of cariogenic bacteria may be a promising approach to decrease caries in patients at high risk.

The demineralization resistance and mechanical assessments of different bioactive restorative materials for primary and permanent teeth: an in vitro study.

OBJECTIVES: This article examines the efficacy of two bioactive dental composites in preventing demineralization while preserving their mechanical and physical properties. MATERIALS AND METHODS: The study compares Beautifil Kids and Predicta® Bioactive Bulk-Fill (Predicta) composites with conventional dental composite. Flexural strength and elastic modulus were evaluated using a universal testing machine. A pH-cycling model assessed the composites' ability to prevent dentin demineralization. Color stability and surface roughness were measured using a spectrophotometer and non-contact profilometer, respectively, before and after pH-cycling, brushing simulation, and thermocycling aging. RESULTS: Beautifil Kids exhibited the highest flexural strength and elastic modulus among the materials (p < 0.05). Predicta demonstrated the highest increase in dentin surface microhardness following the pH-cycling model (p < 0.05). All groups showed clinically significant color changes after pH-cycling, with no significant differences between them (p > 0.05). Predicta exhibited greater color change after brushing and increased surface roughness after thermocycling aging (p < 0.05). While Beautifil Kids had higher surface roughness after pH-cycling (p < 0.05). DISCUSSION/CONCLUSION: Bioactive restorative materials with ion-releasing properties demonstrate excellent resistance to demineralization while maintaining mechanical and physical properties comparable to the control group.

Comparison between Different Bulk-Fill and Incremental Composite Materials Used for Class II Restorations in Primary and Permanent Teeth: In Vitro Assessments.

INTRODUCTION: Several advantages, including improved aesthetics and conservative cavity preparation, made resin-based composite (RBC) a popular restorative material. However, several limitations come with RBC restorations such as the necessity for proper isolation of the tooth and an incremental layering for the material due to the limitations of the depth of cure. Despite these advantages and limitations, the usage of these restorative materials is increasingly being expanded due to the advancement made since their introduction. To overcome some of the limitations, several types of RBC restorations were developed. MATERIALS AND METHODS: Four different RBC materials used for class II restorations in primary and permanent teeth were compared: Z350 XT Filtek™ Universal Restorative (ZXT), Filtek™ Bulk Fill Flowable Restorative (FBF), Beautifil-Bulk Flowable (BBF) and Tetric™ N-Flow (TNF). Flexure strength, elastic modulus, surface roughness, microhardness and microleakage were assessed using standard methods or previously published protocols. The data and differences between the groups were analyzed using One-way analysis of variance (ANOVA), Tukey's multiple comparisons, Kruskal-Wallis and Wilcoxon rank-sum (Mann-Whitney) tests. RESULTS: The study found that BBF (86.24 ± 7.41 MPa) and ZXT (64.45 ± 11.52 MPa) had higher flexural strength than FBF (50.89 ± 8.44 MPa) and TNF (50.67 ± 9.40 MPa), while both exhibited the highest values of surface roughness. Elastic modulus was the highest with BBF, which was not statistically significant from FBF or ZXT (p > 0.05). ZXT (109.7 ± 7.83 VH) exhibited the highest value of microhardness, which was statistically significant from the other three materials (p < 0.0001). Microleakage was assessed after thermocycling for 20,000 cycles to simulate two years in the mouth. FBF (70%) exhibited the most resistance to microleakage. CONCLUSIONS: Different types of RBC restorations exhibit different characteristics. The clinician needs to choose the most appropriate restorative material based on different clinical scenarios.

The Effect of Salbutamol and Budesonide Pediatric Doses on Dental Enamel and Packable and Flowable Composites: Microhardness, Surface Roughness and Color.

OBJECTIVE: To assess and compare the effects of two pediatric anti-asthmatic medication doses on the microhardness of enamel and microhardness, surface roughness and color of restorative materials. METHODS: Human enamel samples and packable and flowable composite restorations were used. The samples were exposed to Salbutamol (0.6 mL/6 mL saline) and Budesonide (2 mL/2 mL saline) via a custom-made chamber connected to a nebulizer. Medication administration was conducted for 10 days. The samples were brushed with an electronic brush in a continuous and circular mode for 10 s after 10 min of medication administration. Assessments of microhardness, surface roughness and color were carried out at three different time intervals: baseline (T0), 5 days (T1) and 10 days (T2). One-way analysis of variance (ANOVA), a two-sample t-test and a Bonferroni multiple comparison test were used to analyze the data and compare between the groups. RESULTS: Both medications significantly (p < 0.05) decreased the microhardness of the enamel and composite samples after 10 days. Both medications lowered the surface roughness of both types of composite with a greater effect observed after 10 days of Budesonide administration (p < 0.05). Both medications had comparable detectable color change on both types of composite with a greater effect observed after 10 days of Budesonide administration (p < 0.05). CONCLUSION: Salbutamol and Budesonide significantly decreased microhardness in the enamel samples. Both medications affected the properties of packable and flowable composites. The packable composite showed more resistance to microhardness changes. Both medications showed a clinically detectable change in the color of packable and flowable composites.

Remineralizing Effects of Resin-Based Dental Sealants: A Systematic Review of In Vitro Studies.

The incorporation of remineralizing additives into sealants has been considered as a feasible way to prevent caries by potential remineralization through ions release. Thus, this systematic review aimed to identify the remineralizing additives in resin-based sealants (RBS) and assess their performance. Search strategies were built to search four databases (PubMed, MEDLINE, Web of Science and Scopus). The last search was conducted in June 2020. The screening, data extraction and quality assessment were completed by two independent reviewers. From the 8052 screened studies, 275 full-text articles were assessed for eligibility. A total of 39 laboratory studies matched the inclusion criteria. The methodologies used to assess the remineralizing effect included microhardness tests, micro-computed tomography, polarized-light microscopy, ions analysis and pH measurements. Calcium phosphate (CaP), fluoride (F), boron nitride nanotubes (BNN), calcium silicate (CS) and hydroxyapatite (HAP) were incorporated into resin-based sealants in order to improve their remineralizing abilities. Out of the 39 studies, 32 studies focused on F as a remineralizing agent. Most of the studies confirmed the effectiveness of F and CaP on enamel remineralization. On the other hand, BNN and CS showed a small or insignificant effect on remineralization. However, most of the included studies focused on the short-term effects of these additives, as the peak of the ions release and concentration of these additives was seen during the first 24 h. Due to the lack of a standardized in vitro study protocol, a meta-analysis was not conducted. In conclusion, studies have confirmed the effectiveness of the incorporation of remineralizing agents into RBSs. However, the careful interpretation of these results is recommended due to the variations in the studies' settings and assessments.

Zirconia Crowns for Primary Teeth: A Systematic Review and Meta-Analyses.

OBJECTIVE: The aim of this systematic review was to summarize the literature regarding the clinical performance of zirconia crowns for primary teeth. MATERIALS AND METHODS: Four electronic databases, Ovid, PubMed, Scopus, and Web of Science were searched. Clinical, observational, and laboratory studies were included. Studies that assessed the performance of zirconia crowns for primary teeth using outcomes such as gingival and periodontal health, parental satisfaction, color stability, crown retention, contour, fracture resistance, marginal integrity, surface roughness, and recurrent caries were included. Risk of bias was assessed using different assessment tools depending on the type of the assessed study. RESULTS: Out of the 2400 retrieved records, 73 full-text records were assessed for eligibility. Thirty-six studies were included for qualitative analysis. The included studies reported that zirconia crowns for primary teeth were associated with better gingival and periodontal health, good retention, high fracture resistance, color stability, high parental acceptance, good marginal adaptation, smooth cosmetic surface, and no recurrent caries. CONCLUSION: Zirconia crowns are promising alternative to other restorative materials and crowns in the field of pediatric dentistry. They showed higher properties and performance in different clinical aspects and great parental satisfaction.

Fear Factor in Seeking Dental Care among Saudis during COVID-19 Pandemic.

The recent coronavirus disease of 2019 (COVID-19) pandemic led to major lifestyle changes. The present study sought to assess factors associated with fear to seek dental care during COVID-19 pandemic in Saudi Arabia. This cross-sectional study was conducted during the COVID-19 outbreak in 2020. An online questionnaire was filled by a convenient sample of adult Saudi residents through mobile instant messaging application. The following measures were collected: sociodemographic characteristics, fear of COVID-19 using validated Fears of Illness and Virus Evaluation scale, fear to seek dental care, perceived health status, and COVID-19 experience. There were 826 participants involved in this study (541 females and 285 males, mean age: 38.8 ± 13.29 years). Fear to seek dental care was significantly higher among females, younger age groups, people who perceived poor general and oral health, and people who perceived high risk of contracting the virus in dental clinics. After controlling for confounders, fear to seek dental care was significantly higher among the age group of 35-44 years, those who perceived high and moderate risk of COVID-19 infection in dental clinics, and among participants who reported untreated dental conditions. Fear that Others Get Sick, Fear of the Impact on Social Life, and Behaviors Related to Illness and Virus Fears were significantly associated with high levels of fear to seek dental care. Within the study's limitations, fear of COVID-19 negatively impacted the study population's willingness to seek dental treatment. Factors such as age, perceived risk of COVID-19 infection in dental clinics, and untreated dental conditions were associated with fear to seek dental care.

The Antibacterial Effects of Resin-Based Dental Sealants: A Systematic Review of In Vitro Studies.

This review aimed to assess the antimicrobial effects of different antibacterial agents/compounds incorporated in resin-based dental sealants. Four databases (PubMed, MEDLINE, Web of Science and Scopus) were searched. From the 8052 records retrieved, 275 records were considered eligible for full-text screening. Nineteen studies met the inclusion criteria. Data extraction and quality assessment was performed by two independent reviewers. Six of the nineteen included studies were judged to have low risk of bias, and the rest had medium risk of bias. Compounds and particles such as zinc, tin, Selenium, chitosan, chlorhexidine, fluoride and methyl methacrylate were found to be effective in reducing the colony-forming unit counts, producing inhibition zones, reducing the optical density, reducing the metabolic activities, reducing the lactic acid and polysaccharide production and neutralizing the pH when they are added to the resin-based dental sealants. In addition, some studies showed that the antibacterial effect was not significantly different after 2 weeks, 2 months and 6 months aging in distilled water or phosphate-buffered saline. In conclusion, studies have confirmed the effectiveness of adding antibacterial agents/compounds to dental sealants. However, we should consider that these results are based on laboratory studies with a high degree of heterogeneity.

Magnetic motion of superparamagnetic iron oxide nanoparticles- loaded dental adhesives: physicochemical/biological properties, and dentin bonding performance studied through the tooth pulpal pressure model.

The limited durability of dentin bonding harshly shortens the lifespan of resin composites restorations. The controlled, dynamic movement of materials through non-contacting forces provides exciting opportunities in adhesive dentistry. We, herein, describe comprehensive investigations of a new dental adhesive with superparamagnetic iron oxide nanoparticles (SPIONs) sensitive to magnetic fields for bonding optimization. This contribution outlines a roadmap of (1) designing and tuning of an adhesive formulation containing SPIONs to enhance penetrability into etched dentin guided by magnetic-field; (2) employing a clinically relevant model of simulated hydrostatic pulpal pressure on the microtensile bond to dentin; and (3) investigating a potential antibacterial effect of the formulated adhesives, and their biocompatibility. SPION-concentration-dependency chemical and mechanical behavior was shown via the degree of conversion, ultimate tensile strength, and micro shear bond strength to dentin. The effects of SPIONs carried on a dental adhesive on the bonding strength to dentin are studied in depth by combining experiments with in vitro simulated model. The results show that under the guided magnetic field, 0.07 wt.% of SPIONs-doped adhesive increased the bond strength that surpasses the reduction caused by hydrostatic pulpal pressure. Using a magnetic guide workflow during the bonding procedures, SPIONs-doped adhesives improved dentin's adhesion without changing adhesives' physicochemical properties. This outcome addresses the key challenge of poor resin infiltration of dentin's conventional total etching during the bonding procedure. The real-time magnetic motion of dental adhesives may open new paths to enhance resin-based restorations' longevity. STATEMENT OF SIGNIFICANCE: In this study, dental adhesives containing superparamagnetic iron oxide nanoparticles (SPIONs) were developed to enhance penetrability into dentin guided by a magnetic field. The adhesives were screened for physical, chemical, antibacterial properties, and cytotoxicity. For the first time, simulated pulpal pressure was used concurrently with the magnetic field to simulate a clinical setting. This approach showed that it is feasible to overcome pulpal pressure jeopardization on bond strength when SPIONs and a magnetic field are applied. The magnetic-responsive adhesives had great potential to improve bond strength, opening new paths to enhance resin-based restorations' longevity without affecting adhesives' biological properties. The use of magnetic-responsive particles and magnetically assisted motion is a promising strategy to improve the sealing ability of dental adhesives.

Flexural Strength, Elastic Modulus and Remineralizing Abilities of Bioactive Resin-Based Dental Sealants.

OBJECTIVE: To assess the remineralizing abilities and compare the flexural strength and elastic modulus of different bioactive pit and fissure sealants. MATERIALS AND METHODS: Human enamel samples were randomly and blindly sealed with one of the following bioactive materials: BioCoat (Bc), ACTIVA KIDS (Av) and BeautiSealant (Bu). Seal-it (Si) was used as a non-bioactive sealant beside a control blank (B) group with no sealant. The sealed samples were subjected to a pH-cycling model (7 days of demineralization-remineralization cycles). The enamel surface hardness change (SHC), scanning electron microscopy-energy dispersive X-ray spectroscopy (SEM-EDX) and polarized light microscopy were used to assess the remineralizing abilities of the studied sealants. Flexural strength and elastic modulus were also assessed following the ISO 4049 protocols. One-way analysis of variance (ANOVA) was used to analyze the results. RESULTS: Bc sealant showed the highest FS and EM (p < 0.05). The contact with Bc and Bu sealants showed significantly lower %SHL (p < 0.05) in comparison to the other. These findings were supported by the results of SEM-EDX and polarized imaging by showing higher percentages of calcium and phosphate ions with the former sealants and thinner demineralized enamel bands. CONCLUSION: In this study, Bc showed the highest flexural strength. Bc and Bu sealants outperformed the other studied sealants in terms of their remineralization abilities.

Wear Behavior and Surface Quality of Dental Bioactive Ions-Releasing Resins Under Simulated Chewing Conditions.

Bioactive materials can reduce caries lesions on the marginal sealed teeth by providing the release of ions, such as calcium, phosphate, fluoride, zinc, magnesium, and strontium. The presence of such ions affects the dissolution balance of hydroxyapatite, nucleation, and epitaxial growth of its crystals. Previous studies mostly focused on the ion-releasing behavior of bioactive materials. Little is known about their wear behavior sealed tooth under mastication. This study aimed to evaluate the wear behavior and surface quality of dental bioactive resins under a simulated chewing model and compare them with a resin without bioactive agents. Three bioactive resins (Activa, BioCoat, and Beautifil Flow-Plus) were investigated. A resin composite without bioactive agents was used as a control group. Each resin was applied to the occlusal surface of extracted molars and subjected to in vitro chewing simulation model. We have assessed the average surface roughness (Ra), maximum high of the profile (Rt), and maximum valley depth (Rv) before and after the chewing simulation model. Vickers hardness and scanning electron microscopy (SEM) also analyzed the final material surface quality). Overall, all groups had increased surface roughness after chewing simulation. SEM analysis revealed a similar pattern among the materials. However, the resin with polymeric microcapsules doped with bioactive agents (BioCoat) showed increased surface roughness parameters. The material with Surface Pre-reacted Glass Ionomer (Beautifil Flow-Plus) showed no differences compared to the control group and improved microhardness. The addition of bioactive agents may influence surface properties, impairing resin composites' functional and biological properties. Future studies are encouraged to analyze bioactive resin composites under high chemical and biological challenges in vitro with pH cycles or in situ models.

Improper Light Curing of Bulkfill Composite Drives Surface Changes and Increases S. mutans Biofilm Growth as a Pathway for Higher Risk of Recurrent Caries around Restorations.

How dentists cure a resin-based material has deleterious effects on the material's properties and its interaction with surrounding dental tissues. Biofilm accumulation has been implicated in the pathogenesis of carious lesions around dental restorations, with its composition manifesting expressed dysbiosis in patients suffering from dental caries. To evaluate the influence of varying radiant exposure on the degree of conversion (DC%), Streptococcus mutans biofilm growth, and surface roughness of bulk-fill composites under different light-curing conditions. Two light-curing units (LCU) at 600 and 1000 mW/cm2 were used to simulate curing conditions with different angulations (∢20° and ∢35°) or 2 mm-distance displacements of the LCU tip. The radiant exposure (RE) was assessed, and the composites were analyzed for DC%. Biofilm formation was induced over the bulk-fill composites and analyzed via colony-forming units counting and scanning electron microscopy (SEM). The surface roughness was analyzed via a profilometer and SEM after biofilm formation. Curing conditions with different angulation or displacement decreased RE compared to the "optimal condition". The moderately (∢35°) angulated LCU tip and low (600 mW/cm2) radiant emittance significantly reduced the DC% (p < 0.05). The difference in DC% between the top and bottom of the composites ranged from 8 to 11% for 600 mW/cm2 and 10 to 20% for 1000 mW/cm2. Greater S. mutans biofilm and surface changes were found in composites with non-optimal RE delivery (e.g., tip displacement and angulation) (p < 0.05). Inadequate polymerization of bulk-fill composites was associated with more biofilm accumulation and surface topography changes. Overall, non-optimally performed curing procedures reduced the amount of delivered RE, which led to low DC%, more biofilm formation, and higher surface roughness. The improper light-curing of bulk-fill composites compromises their physicochemical and biological properties, which could lead to inferior clinical performance and reduced restorative treatments' longevity.

Prospects on Nano-Based Platforms for Antimicrobial Photodynamic Therapy Against Oral Biofilms.

Objective: This review clusters the growing field of nano-based platforms for antimicrobial photodynamic therapy (aPDT) targeting pathogenic oral biofilms and increase interactions between dental researchers and investigators in many related fields. Background data: Clinically relevant disinfection of dental tissues is difficult to achieve with aPDT alone. It has been found that limited penetrability into soft and hard dental tissues, diffusion of the photosensitizers, and the small light absorption coefficient are contributing factors. As a result, the effectiveness of aPDT is reduced in vivo applications. To overcome limitations, nanotechnology has been implied to enhance the penetration and delivery of photosensitizers to target microorganisms and increase the bactericidal effect. Materials and methods: The current literature was screened for the various platforms composed of photosensitizers functionalized with nanoparticles and their enhanced performance against oral pathogenic biofilms. Results: The evidence-based findings from the up-to-date literature were promising to control the onset and the progression of dental biofilm-triggered diseases such as dental caries, endodontic infections, and periodontal diseases. The antimicrobial effects of aPDT with nano-based platforms on oral bacterial disinfection will help to advance the design of combination strategies that increase the rate of complete and durable clinical response in oral infections. Conclusions: There is enthusiasm about the potential of nano-based platforms to treat currently out of the reach pathogenic oral biofilms. Much of the potential exists because these nano-based platforms use unique mechanisms of action that allow us to overcome the challenging of intra-oral and hard-tissue disinfection.

Novel Crown Cement Containing Antibacterial Monomer and Calcium Phosphate Nanoparticles.

Oral biofilm accumulation at the tooth-restoration interface often leads to recurrent dental caries and restoration failure. The objectives of this study were to: (1) develop a novel bioactive crown cement containing dimethylaminohexadecyl methacrylate (DMAHDM) and nano-sized amorphous calcium phosphate (NACP), and (2) investigate the mechanical properties, anti-biofilm activity, and calcium (Ca2+) and phosphate (PO43-) ion release of the crown cement for the first time. The cement matrix consisted of pyromellitic glycerol dimethacrylate and ethoxylated bisphenol-A dimethacrylate monomers and was denoted PEHB resin matrix. The following cements were tested: (1) RelyX luting cement (commercial control); (2) 55% PEHB + 45% glass fillers (experimental control); (3) 55% PEHB + 20% glass + 25% NACP + 0% DMAHDM; (4) 52% PEHB + 20% glass + 25% NACP + 3% DMAHDM; (5) 51% PEHB + 20% glass + 25% NACP + 4% DMAHDM; (6) 50% PEHB + 20% glass + 25% NACP + 5% DMAHDM. Mechanical properties and ion release were measured. Streptococcusmutans (S. mutans) biofilms were grown on cements, and colony-forming units (CFUs) and other biofilm properties were measured. The novel bioactive cement demonstrated strong antibacterial properties and high levels of Ca2+ and PO43- ion release to remineralize tooth lesions. Adding NACP and DMAHDM into the cement did not adversely affect the mechanical properties and dentin bonding strength. In conclusion, the novel NACP + DMAHDM crown cement has excellent potential for restoration cementation to inhibit caries by suppressing oral biofilm growth and increasing remineralization via Ca2+ and PO43- ions. The NACP + DMAHDM composition may have wide applicability to other biomaterials to promote hard-tissue formation and combat bacterial infection.

pH-responsive calcium and phosphate-ion releasing antibacterial sealants on carious enamel lesions in vitro.

OBJECTIVE: Nanoparticles of amorphous calcium phosphate (NACP) have shown beneficial effects of a robust release of calcium and phosphate ions at low pH. Here we examined the effect of NACP combined into antibacterial/rechargeable sealant formulations on the mineral content of artificial carious enamel during pH-cycling mimicking intraoral conditions. MATERIALS AND METHODS: NACP and a quaternary ammonium methacrylate (DMAHDM) were synthesized. Three resin sealants were formulated: "base formulation" (without NACP and DMAHDM, used as control); "NACP on the base formulation" (with 20 wt.% NACP); "NACP on the antibacterial formulation" (with 20 wt.% NACP and 5 wt.% DMAHDM). Standardized enamel windows on sealed non-carious human molars were demineralized and randomly divided into four groups: three groups of teeth sealed with the experimental materials and one group of teeth without sealant application used as negative control. The teeth were exposed to pH cycling regime. The changes in the mineral content of enamel were assessed by quantitative surface hardness loss in percentage (%SHL) and qualitative analyses via scanning electron microscopy/energy-dispersive X-ray spectroscopy (SEM-EDX) and polarized light microscopy (PLM). RESULTS: The contact with NACP-containing formulations provoked significant lower %SHL on sealed enamel (p < 0.05) in comparison to control groups. This outcome was supported by the results of SEM-EDX, in which the enamel presented higher percentages of calcium and phosphate than control groups. PLM showed less enamel superficial demineralization around the sealants containing NACP. CONCLUSION: NACP incorporated into an antibacterial sealant protected the enamel against demineralization. pH-responsive calcium and phosphate-ion releasing sealants with antimicrobial and rechargeable properties may be a reliable complementary approach for caries management. CLINICAL SIGNIFICANCE: Dental caries is the most common childhood disease. Enamel demineralization represents the initial stage of carious lesion formation and may lead to invasive dental procedures. We explored the role of amorphous calcium phosphate (NACP) in a newly-developed antibacterial and rechargeable dental sealant formulation as a preventive approach.

Multifunctional antibacterial dental sealants suppress biofilms derived from children at high risk of caries.

Dental caries in children is a leading worldwide oral health concern. Combining antibacterial and remineralizing additives within dental sealants is a promising approach for caries prevention. Saliva contains oral bacteria that are indicative of the whole oral microbiome and may have the ability to reflect the dysbiosis present in patients with dental caries. Here, we used the saliva of children at a low and high risk of caries to culture microcosm biofilms resembling caries-associated microbial communities and investigated the changes in the biofilms promoted by the formulated dental sealants containing dimethylaminohexadecyl methacrylate (DMAHDM), a quaternary ammonium monomer, and nanoparticles of amorphous calcium phosphate (NACP). Ten volunteers were selected from each caries-risk condition for saliva collection. Biofilms were grown on the tested sealant samples using a 48 h-microcosm biofilm model. The biofilm growth, metabolic behavior, and bacterial acid production were combined with 16S rRNA sequencing analysis for the assessment of the biofilm grown over the material. The DMAHDM-NACP dental sealant formulations promoted a significant reduction in the population of mutans streptococci, total streptococci, lactobacilli, and total microorganisms in the biofilms regardless of the risk status of the donor child's saliva (p < 0.05). Metabolic and lactic acid production was greatly reduced when in contact with the DMAHDM-NACP sealants in both the sources of inoculum. The relative abundance of the Streptococcus genera derived from patients at a high risk of caries was reduced on contact with the antibacterial sealant. The dental sealant formulations were effective in modulating the growth of the biofilm derived from the saliva of children at a low and high risk of caries. The sealants formulated herein with dual functions and purpose for biointeractivity to prevent biofilm formation and mineral loss can be a reliable complementary strategy to decrease the incidence of carious lesions in children at a high risk of caries.

Tooth sealing formulation with bacteria-killing surface and on-demand ion release/recharge inhibits early childhood caries key pathogens.

Herein, we investigated a biointeractive tooth sealing material consisted of dimethylaminohexadecyl methacrylate (DMAHDM) and amorphous calcium phosphate nanoparticles (NACPs) to address the above issues simultaneously. Of note, 5% DMAHDM was incorporated into the resin blend, and 20% NACP was added to inorganic filler content of dental formulations intended as dental sealants. The sealing materials were used to seal human extracted teeth. The sealed teeth were subjected to an early childhood caries (ECC) key pathogen (Candida albicans and Streptococcus mutans) biofilm model using a dynamic caries tooth model (CDC reactor). The biofilm growth over the sealed teeth was assessed via colony-forming unit counting metabolic activity assays. The enamel surface hardness loss, degree of conversion, shear bond strength (SBS), and cytotoxicity were also investigated. Formulations having DMAHDM displayed antibacterial efficiency of 2.8-3.5 and 1.4-4.0 log inhibition for Streptococcus mutans and Candida albicans, respectively. Furthermore, the metabolic activity was reduced on the top of the sealed tooth with the biointeractive sealing materials (p < .05). The degree of conversion values was acceptable. The enamel surface hardness loss decreases (36 ± 9.8%) when in contact with the biointeractive tooth sealing material. The SBS of the combined formulation (5% DMAHDM + 20% NACP) was lower than commercial sealant but similar to experimental control. The investigated sealing material holds valuable dual antibacterial and antifungal activities associated with a reduced mineral loss against the cariogenic challenge promoted by ECC key pathogens.

How we are assessing the developing antibacterial resin-based dental materials? A scoping review.

OBJECTIVES: To identify antibacterial additives and screening/assessment approaches used to evaluate the antibacterial activity of resin-based restorative dental materials containing these additives. DATA: In vitro studies that compared the antibacterial effects of resin-based restorative dental materials with and without antibacterial additives were screened. Risk bias was assessed, and the following data were extracted: antibacterial additive, parental dental material, curing mode, bacterial growth outcome assessment, samples used as a substrate for bacterial growth, inoculum complexity, and culture time as an indicator of biofilm maturity. SOURCE: Arksey and O'Malley's five stages framework using Medline (OVID), EMBASE, and Scopus (Elsevier) databases guided this review. STUDY SELECTION: From 6503 studies initially identified, 348 studies were considered eligible for full-text screening, and 153 were included for data extraction. Almost all studies have a high sampling bias related to both sample size and blindness. Quaternary ammonium monomers were the most investigated additive (45 %), and the most prevailing parental material was resin composite (49 %). There was extensive methodological heterogeneity among the studies for outcome assessment with the majority using resin composite disks (78 %), mono-species Streptococcus mutans as the inoculum (54 %), and a relatively short period of biofilm growth (≤24 h). CONCLUSION: The findings herein present the urgent need for improved biological efficacy studies in this important and exciting field. There is a need for efforts to improve study designs to mimic the oral environment in vivo and to develop standardized methods to help understand and optimize these materials. CLINICAL SIGNIFICANCE: Most studies that incorporate antibacterial additives into resin-based materials claim promising results by bacterial reduction. However, these results should be interpreted with caution due to significant variation in the methods applied for quantifying bacterial growth, the frequent lack of complexity in the biofilms, and the often-short duration of biofilm growth.

Tuning Nano-Amorphous Calcium Phosphate Content in Novel Rechargeable Antibacterial Dental Sealant.

Dental sealants with antibacterial and remineralizing properties are promising for caries prevention among children and adolescents. The application of nanotechnology and polymer development have enabled nanoparticles of amorphous calcium phosphate (NACP) and dimethylaminohexadecyl methacrylate (DMAHDM) to emerge as anti-caries strategies via resin-based dental materials. Our objectives in this study were to (1) incorporate different mass fractions of NACP into a parental rechargeable and antibacterial sealant; (2) investigate the effects on mechanical performance, and (3) assess how the variations in NACP concentration would affect the calcium (Ca) and phosphate (PO4) ion release and re-chargeability over time. NACP were synthesized using a spray-drying technique and incorporated at mass fractions of 0, 10, 20 and 30%. Flexural strength, flexural modulus, and flowability were assessed for mechanical and physical performance. Ca and PO4 ion release were measured over 70 days, and three ion recharging cycles were performed for re-chargeability. The impact of the loading percentage of NACP upon the sealant's performance was evaluated, and the optimized formulation was eventually selected. The experimental sealant at 20% NACP had flexural strength and flexural modulus of 79.5 ± 8.4 MPa and 4.2 ± 0.4 GPa, respectively, while the flexural strength and flexural modulus of a commercial sealant control were 70.7 ± 5.5 MPa (p > 0.05) and 3.3 ± 0.5 GPa (p < 0.05), respectively. A significant reduction in flow was observed in the experimental sealant at 30% NACP (p < 0.05). Increasing the NACP mass fraction increased the ion release. The sealant formulation with NACP at 20% displayed desirable mechanical performance and ideal flow and handling properties, and also showed high levels of long-term Ca and PO4 ion release and excellent recharge capabilities. The findings provide fundamental data for the development of a new generation of antibacterial and rechargeable Ca and PO4 dental sealants to promote remineralization and inhibit caries.