Reciprocal first night effect on rhythmic and non-rhythmic oromotor episodes in moderate to severe primary sleep bruxism: A retrospective physiological study.

BACKGROUND: Sleep on the first night in a sleep laboratory is characterized by a lower sleep quality and frequency of rhythmic masticatory muscle activity (RMMA) than that on the second night in moderate to severe sleep bruxism (SB) patients. OBJECTIVE: The aims of this study was to clarify the physiological factors contributing to the first night effect on oromotor activity during sleep and investigate whether physiological factors involved in the first night effect differed between rhythmic and non-rhythmic oromotor activities. METHODS: Polysomnographic data collected on two consecutive nights from 15 moderate to severe SB subjects (F 7: M 8; age: 23.2 ± 1.3 [mean ± SD] years) were retrospectively analysed. Sleep variables, RMMA and non-specific masticatory muscle activity (NSMA) were scored in relation to episode types (i.e. phasic or tonic and cluster or isolated), sleep architecture and transient arousals. The relationships between nightly differences in oromotor and sleep variables were assessed. The distribution of oromotor events, arousals, cortical electroencephalographic power, RR intervals and heart rate variability were examined in relation to sleep cycle changes. These variables were compared between the first and second nights and between RMMA and NSMA. RESULTS: Sleep variables showed a lower sleep quality on Night 1 than on Night 2. In comparisons with Night 1, the RMMA index increased by 18.8% (p < .001, the Wilcoxon signed-rank test) on Night 2, while the NSMA index decreased by 17.9% (p = .041). Changes in the RMMA index did not correlate with those in sleep variables, while changes in the NSMA index correlated with those in arousal-related variables (p < .001, Spearman's rank correlation). An increase in the RMMA index on Night 2 was found for the cluster type and stage N1 related to sleep cyclic fluctuations in cortical and cardiac activities. In contrast, the decrease in the NSMA index was associated with increases in the isolated type and the occurrence of stage N2 and wakefulness regardless of the sleep cycle. CONCLUSION: Discrepancies in first night effect on the occurrence of RMMA and NSMA represent unique sleep-related processes in the genesis of oromotor phenotypes in SB subjects.

Impact of internal design on the accuracy of 3-dimensionally printed casts fabricated by stereolithography and digital light processing technology.

STATEMENT OF PROBLEM: Altering the internal design of 3-dimensionally (3D) printed dental casts may help to reduce material and time consumption. However, it remains unclear whether such changes would compromise the accuracy of the casts. Further research is also needed to determine the optimal internal design that would maximize printing accuracy. PURPOSE: The purpose of this in vitro study was to evaluate the impact of internal design on the accuracy (trueness and precision) of 3D printed dental casts fabricated by stereolithography (SLA) and digital light processing (DLP) technology. MATERIAL AND METHODS: A reference digital cast was obtained by scanning a maxillary typodont with an intraoral scanner to create 4 types of internal designs, including hollow interior with perforated base (HWB), hollow interior without base (HB), all solid (S), and internal support structure with perforated base (SWB). Digital casts with different internal designs were printed by two 3D printers with different technologies (SLA and DLP). The printed casts were scanned by a desktop scanner to obtain standard tessellation language (STL) format research digital casts. All reference and research digital casts were imported into a software program for comparison and analysis of accuracy. Differences between the reference and research digital casts were quantitatively indicated by the root mean square (RMS) value. The Kruskal-Wallis 1-way ANOVA was used to test significant differences between the different internal design types and the Mann-Whitney U test was used to test significant differences between the two 3D printers (α=.05). RESULTS: The Kruskal-Wallis 1-way ANOVA revealed significant differences in the trueness and precision of different internal design types (all P<.001) for casts printed by both 3D printers. The trueness and precision were significantly worse for the HB design than for the other design types for casts printed by both 3D printers (all P<.05). Regardless of the design type, the trueness was significantly better for casts printed by the SLA-based printer than for casts printed by the DLP-based printer (all P<.05). The precision was significantly worse for casts printed by the SLA-based printer than for casts printed by the DLP-based printer (all P<.05). CONCLUSIONS: The internal design may affect the accuracy of 3D printing. The base is necessary to ensure the accuracy of 3D printed dental casts, whereas the internal support structure did not affect the accuracy of 3D printed dental casts. An all-solid design led to higher precision, but not higher trueness. Dental casts printed with SLA technology have higher trueness and lower precision than those printed with DLP technology.

Prosthetic and orthodontic rehabilitation of a patient with severe maxillary central incisor root resorption associated with impacted maxillary canines.

OBJECTIVE: This case report describes the orthodontic and prosthetic rehabilitation of a patient with resorption of the roots of the maxillary central incisors due to the ectopic maxillary canines. CLINICAL CONSIDERATIONS: A 16-year-old woman presented with severe resorption of the roots of the maxillary central incisors due to the ectopic maxillary canines. The impacted canines were orthodontically tracted with a lingual arch-supporting temporary central incisors and vertical elastics, and, undesirable root proximity was later corrected by moving the canines distally 1.5 mm apart. Gingival replacement cords were placed into the gingival sulcus of the canines, and tooth preparation was performed along with rotary gingival curettage of the interdental papilla. Convex form was provided for the mesial and labio-distal subgingival contour of the restorations. CONCLUSIONS: The creeping attachment of the interdental papilla was successfully achieved by the orthodontic arrangement of interdental distance and the prosthetic stimulus via the retraction cord, rotary curettage, and convex mesial subgingival contours. In addition, selective retraction of the labio-distal gingiva by overcontoured restorations moved the gingival zenith position (GZP) distally. Finally, the canine crown morphology and gingival level mimicked the central incisors. CLINICAL SIGNIFICANCE: This clinical report introduces a treatment workflow of to recover the esthetic disturbance due to severe root resorption of the maxillary central incisors associated with impacted maxillary canines. The present orthodontic and prosthetic procedure can improve both hard and soft tissue esthetics and could be used in similar cases, such as malformed teeth and tooth autotransplantation or transposition with disturbances in the interdental papilla height or the GZP.

Effects of exercise therapy on painful temporomandibular disorders.

Temporomandibular disorders (TMD) are common chronic musculoskeletal pain conditions among orofacial pain. Painful TMD condition such as myalgia and arthralgia can be managed by exercise therapy. However, as it is hard to access actual effect of each modality that is included in an exercise therapy programme due to multiple choice of the management modality, their efficacy remains controversial. Therefore, this review focused on the effects of exercise therapy for the management of painful TMD. The aims of this review were to summarise the effects of exercise therapy for major symptoms of painful TMD and to establish a guideline for the management of painful TMD, resulting in higher quality and reliability of dental treatment. In this review, exercise modalities are clearly defined as follows: mobilisation exercise, muscle strengthening exercise (resistance training), coordination exercise and postural exercise. Furthermore, pain intensity and range of movements were focused as outcome parameters in this review. Mobilisation exercise including manual therapy, passive jaw mobilisation with oral appliances and voluntary jaw exercise appeared to be a promising option for painful TMD conditions such as myalgia and arthralgia. This review addressed not only the effects of exercise therapy on various clinical conditions of painful TMD shown in the past, but also an urgent need for consensus among dentists and clinicians in terms of the management of each condition, as well as terminology.

Changes in occlusal relationships observed using an intraoral scanner in patients with an acquired open bite: A case report.

PATIENTS: This case report describes a procedure for assessing changes in occlusal relationships in patients with acquired open bites due to temporomandibular joint disease using an intraoral scanner (IOS). A digital impression was made using the IOS at the initial visit. Subsequent impressions were made every 6 months using the IOS and magnetic resonance imaging (MRI) or computed tomography (CT). Standard triangulated language (STL) image files of two digital impressions at different points in time were superimposed, including the occlusal relationship with reference to the maxillary dentition. Finally, three-dimensional (3D) changes in the occlusal relationship over time were evaluated. DISCUSSION: In Case 1, the superimposed STL image indicated almost no evident deviation of the mandible. Therefore, an orthodontic treatment was initiated. In contrast, in cases 2 and 3, where changes in the occlusal relationship continued, secondary treatment was postponed and patients continued to be monitored periodically. In case 3, even though left condyle resorption was progressive, the degree of open bite on the right side improved after 6 months. However, the open bite continued to progress for another 6 months despite the stability of the condyle. CONCLUSIONS: Changes in the condylar shape observed using imaging may not always reflect changes in the occlusal relationship. In addition to changes in the condyles and eminences of the temporomandibular joint (TMJ), changes in the occlusal relationships of patients with acquired open bite should be evaluated using an intraoral scanner.

Effect of filler contents on the bond strength of CAD/CAM resin crowns: New resin primer versus conventional silane agents.

Purpose This study aims to evaluate the effects of resin primers containing methyl methacrylate (MMA) and silane agent on the bonding effectiveness of indirect resin composite blocks with three different filler contents.Methods A commercially available computer-aided design/computer-aided manufacturing (CAD/CAM) resin composite block and two experimental resin composite blocks with different filler contents were alumina-blasted and two surface treatments (primer and silane agent) were applied. The resin cement was built up, and the micro-tensile bond strength (µTBS) was measured after 24 hours, 1 month or 3 months of water storage (n = 24 per group). The fracture surfaces after µTBS measurements and resin block/cement interface were observed by scanning electron microscopy (SEM).Results The primer treatment group showed a significantly higher bond strength than the silane group only in F0 (filler content 0 wt%) group (P < 0.001). In the primer group, F0 and F41 (filler content 41 wt%) groups showed significantly higher bond strengths than F82 (filler content 82 wt%) group (P < 0.001). In contrast, in the silane group, F41 group showed significantly higher bond strength than F0 and F82 groups (P < 0.001), and F82 group showed significantly higher bond strength than F0 group (P < 0.001). SEM revealed that the matrix resin was partially destroyed on the fracture surface of the primer group, and an uneven interface surface was observed compared with that of the silane group.Conclusions MMA-containing primers showed higher bonding effectiveness to CAD/CAM resin composite blocks than the silane treatment.

Advanced statistical analyses to reduce inconsistencies in bond strength data focused on donor factors: A six-factor analysis using linear mixed and nonlinear regression models.

PURPOSE: This study aimed to investigate the effects of the age and sex of tooth donors on dentin bond strength. METHODS: A total of 38 extracted teeth (12 male and 26 female donors; age range: 17-82 years) were used in this study. In addition to donor age and sex, four other microtensile bond strength (µTBS) test specimen factors were evaluated: dentin position, bonding area, presence of voids at the interface, and computed tomography (CT) values of dentin. The µTBS was measured immediately (24 h) and 6 months after storage in water. After the µTBS testing, linear mixed and nonlinear regression models were used to analyze the effects of these factors on the µTBS data. RESULTS: The results from the linear mixed model revealed that the bonding area (P = 0.02), presence of voids at the interface (P = 0.04), and storage time (P < 0.001) significantly affected bond strength. In contrast, no correlation was observed between the µ TBS and dentin position (P = 0.08) or sex (P = 0.07). The results of the nonlinear regression model with robust variance-covariance estimators revealed that age significantly affected bond strength (P < 0.001). In addition, a significant positive correlation was found between µTBS and age (P < 0.001), with nonlinearity (P = 0.002). However, no correlation was observed between the µTBS and CT values (P = 0.69) without nonlinearity (P = 0.39). CONCLUSIONS: These findings suggest that bond strength increases with age until 60 years but not afterward.

Maxillary labial peri-implant hard and soft tissue alteration observed on cross-sectional dimension: a 2-year prospective observational study.

OBJECTIVES: To evaluate how peri-implant hard and soft tissue height (BH, MH) alter after final prostheses placement related to labial hard and soft tissue thickness (BW, MW). MATERIALS AND METHODS: Forty-five platform-switched implants were classified into four groups according to BW and MW: type 1 (thick BW and thick MW), type 2 (thick BW and thin MW), type 3 (thin BW and thick MW), type 4 (thin BW and thin MW). Tissue resorption was evaluated on cone-beam CT images taken at final prostheses placement, at 1-year follow-up, and at 2-year follow-up. Kruskal-Wallis test and post hoc Mann-Whitney test were applied; significance was set to 0.05. RESULTS: BH resorption was 0.13 ± 0.12 mm in type 1, 0.26 ± 0.17 mm in type 2, 0.09 ± 0.09 mm in type 3, 0.94 ± 0.19 mm in type 4. Differences between type 1 and 4, type 2 and 4, and type 3 and 4 were statistically significant (p < 0.001, p = 0.005, p < 0.001, respectively). MH resorption was 0.10 ± 0.09 mm in type 1, 0.36 ± 0.16 mm in type 2, 0.12 ± 0.12 mm in Type 3, 0.79 ± 0.23 mm in type 4. Differences between type 1 and 2, type 1 and 4, type 2 and 3, type 2 and 4 and type 3 and 4 were statistically significant (p < 0.001). CONCLUSIONS: Significantly less BH/MH resorption occurs around implants with thick BW/MW than those with thin BW/MW in 2 years. Implants with thick peri-implant soft tissue resulted in significantly less tissue resorption in second year after final prostheses placement.

Fracture strength and behavior of resin-faced CAD/CAM anterior crowns.

The fracture strength and behavior of a novel resin-faced computer-aided design/computer-aided manufacturing (CAD/CAM) crown were investigated to evaluate application to the anterior teeth. Resin-faced CAD/CAM crowns were fabricated by arranging a resin composite on a frame prepared from a CAD/CAM resin block. The fracture strength was evaluated after 24 h of complete polymerization (day 0) and after water immersion for 30 days (day 30). Uniaxial loading was applied to the center point between the incisal edge and cingulum (loading point 1) or at 1.5 mm from the incisal edge (loading point 2). There was no significant difference in the fracture strength of the resin-faced CAD/CAM crowns between day 0 and 30 at loading point 1. At loading point 2, they exhibited decreased fracture strength after water immersion; however, the mean strength was still >1 kN. This novel crown showed good mechanical properties to serve as a prosthesis for the anterior teeth.

Implant deformation and implant-abutment fracture resistance after standardized artificial aging: An in vitro study.

BACKGROUND AND PURPOSE: Zirconia abutments have been widely adopted in clinical implant practice. The unique mechanical properties of zirconia may significantly affect the long-term prognosis of implant treatments. The purpose of this study was to investigate the influence of abutment material on implant deformation and fracture resistance of internal conical connection implant-abutment complexes of two diameters after standardized artificial aging. MATERIALS AND METHODS: Thirty original abutments (one-piece titanium, one-piece zirconia, zirconia with alloy base) with two diameters (regular, narrow) were connected to internal conical connection implants and subjected to a standardized artificial aging process consisting of thermal cycling and mechanical cyclic loading. Microcomputed tomography (µCT) scans of implant bodies were performed before and after aging. 3-dimensional images of implant bodies were generated from the µCT scans and aligned for before and after aging to calculate the volumetric deformation amount. Finally, fracture resistance was measured using a mechanical static loading test for the surviving aged and 30 brand-new specimens. RESULTS: All specimens survived artificial aging. No significant difference in implant deformation was found in the regular groups (p = 0.095). In narrow groups, the one-piece zirconia group showed significantly less deformation (p < 0.0001). For fracture resistance, no significant decrease was observed after aging in any group (p > 0.05). One-piece zirconia abutments showed significantly lower strength than the other two materials for both diameters (p < 0.0001). CONCLUSIONS: In the regular diameter system, abutment material had no significant influence on the tested mechanical property degradation after simulated long-term oral use. The mechanical performance of narrow diameter one-piece zirconia abutments differed from the other two materials. For optimal performance, one-piece zirconia abutments should be adopted only in anterior regions.

Cross-sectional and longitudinal assessment of subchondral cysts in temporomandibular joints: Clinical and MRI study with a mean follow-up of 66 months.

PURPOSE: This observational study aimed to elucidate the pathophysiology of subchondral cysts (SC) in the temporomandibular joint (TMJ) and examine the results of conservative therapy administered to patients with SCs in the TMJ. METHODS: The study included 41 patients with SCs, extracted from 684 consecutive patients who underwent magnetic resonance imaging (MRI). The anatomical features of SCs and positional abnormalities of the articular disc were initially evaluated using MRI. A second MRI examination was performed for 28/41 patients at 40-107 months (mean, 66 months) after the first MRI. The joint space, anteroposterior width of the condylar head (WiC), articular eminence angle (AEA), and visual analog scale of jaw pain (VAS) were assessed alongside the MRI examinations. RESULTS: Most SCs were present in the anterosuperior and central condyle. Disc displacement was observed in 100% of 42 TMJs with SCs. Of the 29 joints in 28 patients, SCs in 19 joints resolved with time, whereas SCs in 10 joints persisted. A significant increase in the WiC and a significant decrease in AEA and VAS scores were observed on the second MRI scan. CONCLUSIONS: SCs tended to form in the anterosuperior and central parts of the condyle, where mechanical loading was likely to be applied. SCs are strongly associated with articular disc displacement. Two-thirds of SCs resolved over time, accompanied by resorption and osteophytic deformation of the condyle. SC might not be an indicator for the start of surgical treatment, and nonsurgical treatment could improve the clinical symptoms of patients with SCs.

The efficacy of immediate implant placement in the anterior maxilla with dehiscence in the facial alveolar bone: A case series.

BACKGROUND: There is no clear evidence that immediate implant placement can be applied to cases with dehiscence in the facial alveolar bone prior to extraction. PURPOSE: To evaluate the results of immediate implant placement in the anterior maxilla with facial alveolar bone dehiscence. MATERIALS AND METHODS: We super positioned pre- and post-operative cone-beam computed tomography (CBCT) three-dimensional reconstruction images. A CBCT was taken before tooth extraction (T0), when the definitive restoration was placed (T1), and 1 year after placing the definitive restoration (T2). The depth and width of the dehiscence at T0, and the height and width of the facial hard and soft tissues are measured at the implant site at T1 and T2. We calculated the change in the amount of hard and soft tissues from T1 to T2 and determined the correlation between preoperative facial alveolar bone morphology and postoperative gingival recession. RESULTS: 13 women and 7 men were recruited. A total of 20 implants were evaluated. The implant survival rate was 100%. The mean facial alveolar bone dehiscence width was 3.9 ± 1.6 mm, and the mean depth from platform level was 2.9 ± 1.7 mm. The mean implant body exposure on the buccal was 4.8 ± 1.7 mm, and the mean socket width gap was 2.1 ± 0.8 mm. At T1, the mean facial hard tissue width was 2.1 ± 0.7 mm, and the mean height was 2.0 ± 0.7 mm. The mean change in vertical gingival recession from T1 to T2 was 0.5 ± 0.5 mm. We found a positive correlation between facial alveolar bone dehiscence width and gingival recession (r = 0.46, p-value = 0.04) and between dehiscence depth and gingival recession (r = 0.48, p-value = 0.03). CONCLUSIONS: The results of our CBCT superposition method indicated that immediate implant placement can be considered in patients with facial alveolar bone dehiscence. However, there may be a higher risk of gingival recession with wide or deep dehiscence.

Understanding the effect of scan spans on the accuracy of intraoral and desktop scanners.

OBJECTIVES: This study aimed to measure and compare the accuracy (trueness and precision) of intraoral scanners and desktop scanners when scanning different spans. METHODS: Three plaster models representing different spans (full arch, half arch, and three teeth) were obtained from conventional silicone impressions of a maxillary typodont and used as the scanning objects. An industrial scanner (ATOS III Triple Scan) was used to scan the three plaster models to obtain reference digital models. The plaster models were then scanned using two intraoral scanners (Trios 3 and Primescan) and two desktop scanners (LS3 and D2000) to obtain test digital models. The reference and test models were imported into professional reverse engineering software for processing and analysis. The root mean square value indicated differences between the reference and test models. Two-way ANOVA and Bonferroni multiple comparison tests were used for statistical analysis. RESULTS: Two-way ANOVA tests revealed significant differences in trueness and precision for different scan spans (p < 0.001) and different scanners (p < 0.001), which indicates that the scanner types and scan spans affect the accuracy of the scanner. There was no significant difference in the accuracy of the D2000 at three different scan spans (trueness: 23.82 ± 0.22 µm, 21.53 ± 0.18 µm, and 21.02 ± 0.27 µm respectively; precision: 7.86 ± 0.83 µm, 7.87 ± 1.11 µm, and 7.82 ± 0.84 µm respectively). For the LS3 and the two intraoral scanners, the accuracy of the full arch scan (LS 3, trueness: 33.35 ± 0.47 µm, precision:15.36 ± 3.10 µm; Trios 3, trueness: 46.92 ± 9.23 µm, precision:20.79 ± 3.08 µm; Primescan, trueness: 28.73 ± 0.77 µm, precision:15.74 ± 2.45 µm) was significantly lower than that of the half arch (LS 3, trueness: 27.27 ± 0.43 µm, precision:5.62 ± 0.88 µm; trios 3, Trueness: 22.29 ± 1.50 µm, precision:14.12 ± 2.25 µm; Primescan, trueness: 18.91 ± 0.70 µm, precision:7.94 ± 1.09 µm) and three teeth scans (LS 3, trueness: 24.68 ± 0.36 µm, precision:5.29 ± 0.62 µm; Trios 3, trueness: 16.92 ± 0.78 µm, precision:11.95 ± 2.22 µm; Primescan, trueness: 15.79 ± 0.65 µm, precision:7.68 ± 0.62 µm). CONCLUSIONS: The scan span affected the accuracy of the intraoral scanners, but not necessarily the accuracy of the desktop scanners.

Fracture Resistance of Zirconia Abutments with or without a Titanium Base: An In Vitro Study for Tapered Conical Connection Implants.

Dental implants with tapered conical connections are often combined with zirconia abutments for esthetics; however, the effect of the titanium base on the implant components remains unclear. This study evaluated the effects of a titanium base on the fracture resistance of zirconia abutments and damage to the tapered conical connection implants. Zirconia (Z) and titanium base zirconia (ZT) abutments were fastened to Nobel Biocare (NB) implants and Straumann (ST) implants and subjected to static load testing according to ISO 14801:2016. The experiments were performed with 3 mm of the platform exposed (P3) and no platform exposed (P0). The fracture loads were statistically greater in the titanium base abutments than the zirconia abutments for the NB and ST specimens in the P0 condition. In the P3 condition of the ST specimens, the deformation volume of the ZT group was significantly greater than the Z group. The titanium base increased the fracture resistance of the zirconia abutments. Additionally, the titanium base caused more deformation in the P3 condition. The implant joint design may also affect the amount of damage to the implants when under a load. The mechanical properties of the abutment should be considered when selecting a clinical design.

Effect of tooth temperature on the dentin bonding durability of a self-curing adhesives: The discrepancy between the laboratory setting and inside the mouth.

A two-bottle self-curing universal adhesive (Tokuyama Universal Bond; Tokuyama Dental) that does not require a long waiting time or light curing after application of the bonding material has been developed. This study aimed to evaluate the influence of tooth and adhesive temperature during the bonding procedure on the effectiveness of dentin bonding. The results showed that the tooth temperature affected the effectiveness of the dentin bonding; therefore, to determine the precise bonding ability in the laboratory, the temperature of the tooth must be raised until it is the same as that of the oral cavity. In addition, the temperature of the material did not affect bonding effectiveness; this result confirms that it does not matter whether the refrigerated product is used soon after its removal from the refrigerator or after it reaches room temperature in the clinic.

Impact of number of functional teeth on independence of Japanese older adults.

AIM: To examine the relationship between the number of present and functional teeth at baseline and future incidence of loss of independence. METHODS: Participants were community-dwelling older individuals who participated in a comprehensive geriatric health examination conducted in Kusatsu town, Japan, between 2009 and 2015. The primary endpoint was the incidence of loss of independence among participants, defined as the first certification of long-term care insurance in Japan. The numbers of present and functional teeth at baseline were determined via an oral examination. Demographics, clinical variables (e.g., history of chronic diseases and psychosocial factors), blood nutritional markers, physical functions, and perceived masticatory function were assessed. RESULTS: This study included 1121 individuals, and 205 individuals suffered from loss of independence during the follow-up period. Kaplan-Meier estimates of loss of independence for participants with smaller numbers of present and functional teeth were significantly greater than for those with larger numbers of teeth. Cox proportional hazard analyses indicated that a smaller number of present teeth was not a significant risk factor after adjusting for demographic characteristics. However, the number of functional teeth was a significant risk factor after the adjustment (hazard ratio: 1.975 [1.168-3.340]). Additionally, higher hazard ratios were observed in other adjusted models, but they were not statistically significant. CONCLUSIONS: The number of functional teeth may be more closely related to the future incidence of loss of independence than the number of present teeth. This novel finding suggests that prosthodontic rehabilitation for tooth loss possibly prevents the future incidence of this life-event. Geriatr Gerontol Int 2022; 22: 1032-1039.

CBCT analysis of the tissue thickness at immediate implant placement with contour augmentation in the maxillary anterior zone: a 1-year prospective clinical study.

BACKGROUND: Immediate implant placement with simultaneous contour augmentation such as guided bone regeneration (GBR) or connective tissue grafting (CTG) has been widely performed. However, few prospective studies have evaluated both peri-implant bone and soft tissue changes between the preoperative and postoperative periods. The purpose of this study is to quantify the horizontal dimensional changes of the facial bone and soft tissue following immediate implant placement with contour augmentation. MATERIAL AND METHODS: Twenty patients who underwent immediate implant placement in the anterior maxilla received GBR and CTG (test group) or GBR only (control group). Cone-beam computed tomography (CBCT) scans were taken preoperatively and 1 year after the definitive prosthesis connection, and then, they were superimposed. On the CBCT images of the two stages, the horizontal distance from the implant platform to the facial bone surface (BW) and the horizontal soft tissue width (GW) were measured at the implant platform level and 2 mm apical to the implant platform level. The sum of BW and GW (=TW) was used to assess the facial mucosal contour. RESULTS: BW decreased significantly from preoperative to 1 year after prosthesis connection with a mean decrease of 0.47 mm (P =0.021) in the control group and a mean decrease of 0.50 mm (P = 0.019) in the test group at the implant platform level. GW increased significantly with a mean increase of 1.37 mm (P =0.005) in the test group at the implant platform level. TW decreased significantly with a mean decrease of 0.46 mm in the control group (P =0.049) but increased significantly with a mean increase of 0.87 mm in the test group (P =0.005) at the implant platform level. CONCLUSIONS: Immediate implant placement with CTG showed a soft tissue gain of 1.37 mm compensated for bone resorption, thus still preserving the preoperative mucosal contour. CTG should be performed with immediate implant placement in cases where preoperative mucosal contours need to be maintained.

First night effect on polysomnographic sleep bruxism diagnosis varies among young subjects with different degrees of rhythmic masticatory muscle activity.

OBJECTIVE: This study investigated the first night effect on the polysomnographic diagnosis of sleep bruxism (SB). METHODS: Polysomnographic recordings were performed for two consecutive nights in forty-three subjects (mean age 23.7 ± 0.32 years [range: 20.0-33.0]). Sleep variables and rhythmic masticatory muscle activity (RMMA) were scored for two nights. The diagnosis of SB was graded by the frequency of RMMA with cut-off values of two and four times per hour of sleep. RESULTS: Participants were classified into control (n = 15), low (n = 13) and moderate-high (n = 15) groups. Among the three groups, the concordance of the SB diagnosis was compared between the two nights. Sleep variables showed a significant first-night effect with lower sleep efficiency, longer sleep latency and higher frequency of arousals. The frequency of RMMA significantly increased from the first to the second night in the moderate-high SB group only. The concordance rate of the severity between the two nights was 93.3% (14/15) in the control group, 76.9% (10/13) in the low SB group and 60% (9/15) in the moderate-high SB group. When the severity was determined on the first night, it remained the same on the second night in 77.8% (14/18) of the control group, 66.7% (10/15) of the low SB group and 90.0% (9/10) of the moderate-high SB group. CONCLUSION: The results showed that the first night effect on the occurrence of RMMA differed among the different degrees of the RMMA frequency, and suggest that, due to the first night effect, single-night polysomnography may underestimate the moderate-high level of SB but differentiate the low level of SB from controls.

Number of functional teeth more strongly predicts all-cause mortality than number of present teeth in Japanese older adults.

AIM: Previous studies on the association between intraoral conditions and mortality in community-dwelling older individuals reported that fewer present teeth (PT) are significant risk factors for mortality. However, how the number of PT relative to the number of functional teeth (FT), including both present and rehabilitated teeth, influences mortality has not been investigated fully. This study examined the impact of the number of FT on mortality among community-dwelling Japanese older adults. METHODS: This study was a retrospective, observational and population-based follow-up study, which examined 1188 older individuals who participated in an annual geriatric health examination from 2009 to 2015. The average follow-up period was 1697.0 ± 774.5 days. The primary outcome was all-cause mortality at follow-up. The numbers of PT and FT of each participant were counted during an oral examination. In addition, demographics, clinical variables, blood nutrient markers, physical functions and perceived masticatory function were measured. RESULTS: Kaplan-Meier analysis, followed by a log-rank test, revealed that fewer PT (P < 0.001) and FT (P = 0.002) were significantly associated with a reduced survival rate. Cox's proportional hazard analysis indicated that the number of FT, but not the number of PT, was a significant independent mortality risk factor after adjusting for demographics, clinical variables, nutrient markers and physical functioning (P = 0.036, hazard ratio: 2.089). CONCLUSIONS: Current results suggest that the number of FT more strongly predicts all-cause mortality than the number of PT among community-dwelling older adults. Further studies are necessary to consider the confounding of socioeconomic status and disability status. Geriatr Gerontol Int 2020; ••: ••-••.

Sleep Quality, Psychologic Profiles, Cardiac Activity, and Salivary Biomarkers in Young Subjects with Different Degrees of Rhythmic Masticatory Muscle Activity: A Polysomnography Study.

AIMS: To investigate the objective and subjective characteristics of sleep and psychosomatic and physiologic variables in young subjects with different frequencies of rhythmic masticatory muscle activity (RMMA) during sleep. METHODS: A total of 54 young (mean age 23.8 ± 2.1 years), healthy subjects underwent polysomnographic (PSG) recordings for 2 nights. Sleep and psychosomatic states were assessed prior to PSG using validated questionnaires, and the following PSG variables were assessed before and after sleep: subjective sleep quality, physical symptoms, anxiety level, and salivary biomarkers. Second-night sleep and oromotor variables were scored according to standard criteria as well as the quantitative autonomic activity during the night. These variables were compared among the high- (H-RMMA, n = 21, mean RMMA index: 5.7 times/hour) and low- (L-RMMA, n = 13, 2.6 times/hour) frequency RMMA and control (CTL, n = 20 subjects, 1.0 time/hour) groups. RESULTS: Sleep and psychosomatic states did not differ among the three groups. No group differences were noted for nonrhythmic oromotor events. Sleep architecture did not differ among the three groups except for sleep latency being shorter (P = .008) and microarousal index being higher (P = .013) in the H-RMMA group. Mean heart rate during sleep was lower (Stage N2, P = .008; Stage N3, P = .036; Stage R, P = .045) in the H-RMMA group, but the heart rate variability did not differ among the three groups. Sleep quality and anxiety level before and after sleep did not differ among the three groups. Cortisol did not differ among the three groups, while chromogranin A in the morning was slightly lower in the L-RMMA group (median: 9.1 pmol/mg) than in the H-RMMA group (12.3 pmol/mg) (P = .049). CONCLUSION: In otherwise healthy subjects presenting normal physiologic variables, neither significant nor consistent differences in sleep architecture, psychologic states, heart rate variability, or salivary biomarkers in relation to the frequency of RMMA were found.