RESUMO
In this study, the interaction forces between different cellulosic nanomaterials and a protein domain belonging to cellulose binding modules family 1 (CBM1) were investigated at the molecular scale. Cellulose binding modules are protein domains found in carbohydrate active enzymes having an affinity toward cellulosic materials. Here, the binding force of a fusion protein containing a cellulose binding module (CBM1) produced recombinantly in E. coli was quantified on different cellulose nanocrystals immobilized on surfaces. Adhesion of the CBM on cellulose with different degrees of crystallinity as well as on chitin nanocrystals was examined. This study was carried out by single molecule force spectroscopy using an atomic force microscope, which enables the detection of binding force of individual molecules. The study contains a preliminary quantification of the interactions at the molecular level that sheds light on the development of new nanocellulose-based nanocomposites with improved strength and elasticity.
Assuntos
Celulases/metabolismo , Celulose/química , Nanoestruturas/química , Aderência Bacteriana , Celulases/química , Quitina/análogos & derivados , Escherichia coli , Proteínas de Escherichia coli/química , Proteínas de Escherichia coli/metabolismo , Ligação Proteica , Domínios ProteicosRESUMO
The etching behavior of polycrystalline synthetic hydroxyapatite samples has been evaluated to explore the protective impact of fluoride on a tooth-like model system. Etching rates before and after fluoridation with a NaF solution at pH 6 were determined by atomic force microscopy. Despite a very low F concentration of ca. 0.2 atom % in the hydroxyapatite surface, a very strong effect on the acid resistance can be observed. Depending on the crystal orientation, etching in a NaAc buffer at pH 4.5 was completely inhibited for at least 5 min. The major part of the surface withstood etching even for more than 23 min. These results give new insights into how the amount of incorporated fluoride in hydroxyapatite correlates with its protective impact.
RESUMO
Streptococcus mutans cells form robust biofilms on human teeth and are strongly related to caries incidents. Hence, understanding the adhesion of S. mutans in the human oral cavity is of major interest for preventive dentistry. In this study, we report on atomic force microscopy-based single-cell force spectroscopy measurements of S. mutans cells to hydroxyapatite surfaces. We observe for almost all measurements a significant difference in adhesion strength for S. mutans as well as for Staphylococcus carnosus cells. However, the increase in adhesion strength after saliva exposure is much higher for S. mutans cells compared to S. carnosus cells. Our results demonstrate that S. mutans cells are well adapted to their natural environment, the oral cavity. This ability promotes the biofilm-forming capability of that species and hence the production of caries-provoking acids. In consequence, understanding the fundamentals of this mechanism may pave a way towards more effective caries-reducing techniques.
Assuntos
Biofilmes/efeitos dos fármacos , Adesão Celular/efeitos dos fármacos , Saliva/química , Streptococcus mutans/efeitos dos fármacos , Biofilmes/crescimento & desenvolvimento , Durapatita/química , Humanos , Microscopia de Força Atômica , Saliva/microbiologia , Análise de Célula Única , Streptococcus mutans/patogenicidade , Streptococcus mutans/ultraestrutura , Dente/microbiologia , Dente/ultraestruturaRESUMO
Increased molecular understanding of multifactorial diseases paves the way for novel therapeutic approaches requiring sophisticated carriers for intracellular delivery of actives. We designed and characterized self-assembling lipid-core nanocapsules for coencapsulation of two poorly soluble natural polyphenols curcumin and resveratrol. The polyphenols were identified as high-potential therapeutic candidates intervening in the intracellular inflammation cascade of chondrocytes during the progress of osteoarthritis. To elucidate the interplay between chondrocytes and nanocapsules and their therapeutic effect, we pursued a complementary analytical approach combining label-free visualization with biological assays. Primary human chondrocytes did not show any adverse effects upon nanocapsule application and coherent anti-Stokes Raman scattering images visualized their intracellular uptake. Further, by systematically blocking different uptake mechanisms, an energy independent uptake into the cells could be identified. Additionally, we tested the therapeutic effect of the polyphenol-loaded carriers on inflamed chondrocytes. Treatment with nanocapsules resulted in a major reduction of nitric oxide levels, a well-known apoptosis trigger during the course of osteoarthritis. For a more profound examination of this protective effect on joint cells, we pursued studies with atomic force microscopy investigations. Significant changes in the cell cytoskeleton as well as prominent dents in the cell membrane upon induced apoptosis were revealed. Interestingly, these effects could not be detected for chondrocytes which were pretreated with the nanocapsules. Overall, besides presenting a sophisticated carrier system for joint application, these results highlight the necessity of establishing combinatorial analytical approaches to elucidate cellular uptake, the interplay of codelivered drugs and their therapeutic effect on the subcellular level.
Assuntos
Condrócitos/metabolismo , Curcumina/metabolismo , Portadores de Fármacos/metabolismo , Nanocápsulas/química , Polifenóis/metabolismo , Estilbenos/metabolismo , Anti-Inflamatórios não Esteroides/metabolismo , Anti-Inflamatórios não Esteroides/farmacologia , Curcumina/farmacologia , Portadores de Fármacos/farmacologia , Extrato de Sementes de Uva/química , Humanos , Inflamação/metabolismo , Microscopia de Força Atômica , Microscopia Óptica não Linear , Tamanho da Partícula , Polifenóis/farmacologia , Polissorbatos/química , Resveratrol , Estilbenos/farmacologia , VitisRESUMO
The mechanisms of action of fluoride have been discussed controversially for decades. The cavity-preventive effect for teeth is often traced back to effects on demineralization. However, an effect on bacterial adhesion was indicated by indirect macroscopic studies. To characterize adhesion on fluoridated samples on a single bacterial level, we used force spectroscopy with bacterial probes to measure adhesion forces directly. We tested the adhesion of Streptococcus mutans , Streptococcus oralis , and Staphylococcus carnosus on smooth, high-density hydroxyapatite surfaces, pristine and after treatment with fluoride solution. All bacteria species exhibit lower adhesion forces after fluoride treatment of the surfaces. These findings suggest that the decrease of adhesion properties is a further key factor for the cariostatic effect of fluoride besides the decrease of demineralization.
Assuntos
Aderência Bacteriana/efeitos dos fármacos , Cárie Dentária/tratamento farmacológico , Durapatita/farmacologia , Fluoretos/uso terapêutico , Streptococcus/efeitos dos fármacos , Cárie Dentária/microbiologia , Oxirredução , Propriedades de SuperfícieRESUMO
In recent decades, antibiotic resistance has become a crucial challenge for human health. One potential solution to this problem is the use of antibacterial surfaces, i.e., copper and copper alloys. This study investigates the antibacterial properties of brass that underwent topographic surface functionalization via ultrashort pulsed direct laser interference patterning. Periodic line-like patterns in the scale range of single bacterial cells were created on brass with a 37% zinc content to enhance the contact area for rod-shaped Escherichia coli (E. coli). Although the topography facilitates attachment of bacteria to the surface, reduced killing rates for E. coli are observed. In parallel, a high-resolution methodical approach was employed to explore the impact of laser-induced topographical and chemical modifications on the antibacterial properties. The findings reveal the underlying role of the chemical modification concerning the antimicrobial efficiency of the Cu-based alloy within the superficial layers of a few hundred nanometers. Overall, this study provides valuable insight into the effect of alloy composition on targeted laser processing for antimicrobial Cu-surfaces, which facilitates the thorough development and optimization of the process concerning antimicrobial applications.
Assuntos
Cobre , Escherichia coli , Humanos , Cobre/farmacologia , Cobre/química , Ligas/farmacologia , Ligas/química , Zinco/farmacologia , Zinco/química , Antibacterianos/farmacologia , Antibacterianos/química , Lasers , Bactérias , Propriedades de SuperfícieRESUMO
Controlling the interface between bacteria and solid materials has become an important task in biomedical science. For a fundamental and comprehensive understanding of adhesion it is necessary to seek quantitative information about the involved interactions. Most studies concentrate on the modification of the surface (chemical composition, hydrophobicity, or topography) neglecting, however, the influence of the bulk material, which always contributes to the overall interaction via van der Waals forces. In this study, we applied AFM force spectroscopy and flow chamber experiments to probe the adhesion of Staphylococcus carnosus to a set of tailored Si wafers, allowing for a separation of short- and long-range forces. We provide experimental evidence that the subsurface composition of a substrate influences bacterial adhesion. A coarse estimation of the strength of the van der Waals forces via the involved Hamaker constants substantiates the experimental results. The results demonstrate that the uppermost layer is not solely responsible for the strength of adhesion. Rather, for all kinds of adhesion studies, it is equally important to consider the contribution of the subsurface.
Assuntos
Aderência Bacteriana , Dióxido de Silício/química , Staphylococcus/química , Materiais Biocompatíveis/química , Microscopia de Força Atômica , Propriedades de SuperfícieRESUMO
Research into materials for medical application draws inspiration from naturally occurring or synthesized surfaces, just like many other research directions. For medical application of materials, particular attention has to be paid to biocompatibility, osseointegration, and bacterial adhesion behavior. To understand their properties and behavior, experimental studies with natural materials such as teeth are strongly required. The results, however, may be highly case-dependent because natural surfaces have the disadvantage of being subject to wide variations, for instance in their chemical composition, structure, morphology, roughness, and porosity. A synthetic surface which mimics enamel in its performance with respect to bacterial adhesion and biocompatibility would, therefore, facilitate systematic studies much better. In this study, we discuss the possibility of using hydroxyapatite (HAp) pellets to simulate the surfaces of teeth and show the possibility and limitations of using a model surface. We performed single-cell force spectroscopy with single Staphylococcus aureus cells to measure adhesion-related parameters such as adhesion force and rupture length of cell wall proteins binding to HAp and enamel. We also examine the influence of blood plasma and saliva on the adhesion properties of S. aureus. The results of these measurements are matched to water wettability, elemental composition of the samples, and the change in the macromolecules adsorbed over time on the surface. We found that the adhesion properties of S. aureus were similar on HAp and enamel samples under all conditions: Significant decreases in adhesion strength were found equally in the presence of saliva or blood plasma on both surfaces. We therefore conclude that HAp pellets are a good alternative for natural dental material. This is especially true when slight variations in the physicochemical properties of the natural materials may affect the experimental series.
Assuntos
Durapatita , Staphylococcus aureus , Esmalte Dentário , Durapatita/química , Durapatita/metabolismo , Durapatita/farmacologia , Análise Espectral , Staphylococcus aureus/metabolismo , Propriedades de SuperfícieRESUMO
Caries is one of the most prevalent diseases worldwide, which is caused by the degradation of the tooth enamel surface. In earlier research the opportunistic pathogen Candida albicans has been associated with the formation of caries in children. Colonization of teeth by C. albicans starts with the initial adhesion of individual yeast cells to the tooth enamel surface. In this study, we visualized the initial colonization of C. albicans yeast cells on pellicle-covered enamel by scanning electron microscopy. To quantitatively unravel the initial adhesion strength, we applied fluidic force microscopy-based single-cell force spectroscopy to examine the key adhesion parameters adhesion force, rupture length and de-adhesion work. We analyzed single saliva-treated or untreated yeast cells on tooth enamel specimens with or without salivary pellicle. Under all tested conditions, adhesion forces in the lower nanonewton range were determined. Furthermore, we have found that all adhesion parameters were enhanced on the pellicle-covered compared to the uncovered enamel. Our data suggest that initial adhesion occurs through a strong interaction between yeast cell wall-associated adhesins and the salivary pellicle. Future SCFS studies may show whether specific management of the salivary pellicle reduces the adhesion of C. albicans on teeth and thus contributes to caries prophylaxis.
RESUMO
Structural and chemical changes that arise from fluoridation of hydroxyapatite (Ca(5)(PO(4))(3)OH or "HAp"), as representing the synthetic counterpart of tooth enamel, are investigated by X-ray photoelectron spectroscopy (XPS). Elemental depth profiles with a depth resolution on the nanometer scale were determined to reveal the effect of fluoridation in neutral (pH = 6.2) and acidic agents (pH = 4.2). With respect to the chemical composition and the crystal structure, XPS depth profiling reveals different effects of the two treatments. In both cases, however, the fluoridation affects the surface only on the nanometer scale, which is in contrast to recent literature with respect to XPS analysis on dental fluoridation, where depth profiles of F extending to several micrometers were reported. In addition to the elemental depth profiles, as published in various other studies, we also present quantitative depth profiles of the compounds CaF(2), Ca(OH)(2), and fluorapatite (FAp) that were recently proposed by a three-layer model concerning the fluoridation of HAp in an acidic agent. The analysis of our experimental data exactly reproduces the structural order of this model, however, on a scale that differs by nearly 2 orders of magnitude from previous predictions. The results also reveal that the amount of Ca(OH)(2) and FAp is small compared to that of CaF(2). Therefore, it has to be asked whether such narrow Ca(OH)(2) and FAp layers really can act as protective layers for the enamel.
Assuntos
Esmalte Dentário/química , Durapatita/química , Halogenação , Dente/química , Diaminas/química , Fluoretos/química , Espectroscopia FotoeletrônicaRESUMO
Candida albicans-related bloodstream infections are often associated with infected central venous catheters (CVC) triggered by microbial adhesion and biofilm formation. We utilized single-cell force spectroscopy (SCFS) and flow chamber models to investigate the adhesion behavior of C. albicans yeast cells and germinated cells to naïve and human blood plasma (HBP)-coated CVC tubing. Germinated cells demonstrated up to 56.8-fold increased adhesion forces to CVC surfaces when compared to yeast cells. Coating of CVCs with HBP significantly increased the adhesion of 60-min germinated cells but not of yeast cells and 30-min germinated cells. Under flow conditions comparable to those in major human veins, germinated cells displayed a flow directional-orientated adhesion pattern to HBP-coated CVC material, suggesting the germ tip to serve as the major adhesive region. None of the above-reported phenotypes were observed with germinated cells of an als3Δ deletion mutant, which displayed similar adhesion forces to CVC surfaces as the isogenic yeast cells. Germinated cells of the als3Δ mutant also lacked a clear flow directional-orientated adhesion pattern on HBP-coated CVC material, indicating a central role for Als3 in the adhesion of germinated C. albicans cells to blood exposed CVC surfaces. In the common model of C. albicans, biofilm formation is thought to be mediated primarily by yeast cells, followed by surface-triggered the formation of hyphae. We suggest an extension of this model in which C. albicans germ tubes promote the initial adhesion to blood-exposed implanted medical devices via the germ tube-associated adhesion protein Als3.
Assuntos
Candida albicans/fisiologia , Adesão Celular , Cateteres Venosos Centrais/microbiologia , Materiais Revestidos Biocompatíveis , Proteínas Fúngicas/metabolismo , Plasma/metabolismo , Plasma/microbiologia , Biofilmes/crescimento & desenvolvimento , Candida albicans/patogenicidade , Proteínas Fúngicas/genética , Humanos , Hifas/crescimento & desenvolvimento , Imagem Individual de MoléculaRESUMO
The salivary pellicle is a thin acellular film formed on orally exposed surfaces by adsorption of macromolecules from the oral fluids and serves as a protective layer in the maintenance of oral health. Pellicle thickness measurements are a central tool helping to understand how exogenous manipulations may influence pellicle formation. This is of particular importance for the investigation of new preventive and therapeutic approaches. In the present study we determined the kinetics of the in situ pellicle thickness formation at different intraoral sites and investigated how pellicle formation occurs in different individuals. To address the kinetic aspect, the thickness of the in situ pellicle was determined after formation periods of 3 min, 30 min and 120 min. The thickness of the pellicle was either measured on silicon wafers by ellipsometry or on bovine enamel by transmission electron microscopy. We found a physiologically important rapid pellicle formation phase within the first minutes and a slow pellicle formation phase between 30 min and 120 min. Furthermore, our results identify significant inter-individual differences both for the pellicle thickness and for the formation kinetics, indicating the consideration of individual-specific differences of the pellicle layer as an important aspect for future studies.
Assuntos
Esmalte Dentário/química , Película Dentária/química , Saliva/química , Compostos de Silício/química , Adulto , Animais , Bovinos , Feminino , Humanos , Cinética , MasculinoRESUMO
Fluoridation of enamel is believed to provide an effective tool to protect teeth from caries, but there is still little information on the time scale of fluoride uptake. In this study, highly compressed pellets of hydroxyapatite are used as first-order model systems to approximate the mineral component of natural enamel for investigations on the time-dependence of fluoride uptake. We found that both the overall amount of fluoride as well as the mean thickness of the fluoridated surface layer cannot be extended to any values just by increasing the application time of a fluoride containing agent. Instead, both parameters start to become constant on a time scale of about 3 min. The present results as obtained on a synthetic model "tooth" show that the time scale to provide the maximum amount of fluoride possible is of the same order of magnitude as that in usual daily practice in dental care when applying toothpastes or mouth rinses.
RESUMO
Hydroxyapatite substrates are common biomaterials, yet samples of natural teeth do not meet the demands for well-defined, highly reproducible properties. Pellets of hydroxyapatite were produced via the field assisted sintering technology (FAST) as well as via pressureless sintering (PLS). The applied synthesis routes provide samples of very high density (95%-99% of the crystallographic density) and of very low surface roughness (lower than 1 nm when averaged per 1 µm2). The chemical composition of the raw material (commercial HAP powder) as well as the crystalline structure is maintained by the sintering processes. These specimens can therefore be considered as promising model surfaces for studies on the interactions of biomaterial with surfaces of biological relevance, as demonstrated for the adsorption of BSA proteins.
Assuntos
Esmalte Dentário , Materiais Biocompatíveis , Durapatita , Microscopia Eletrônica de Varredura , Espectroscopia de Infravermelho com Transformada de Fourier , Difração de Raios XRESUMO
We present a combined x-ray and neutron reflectivity study characterizing the interface between polystyrene (PS) and silanized surfaces. Motivated by the large difference in slip velocity of PS on top of dodecyl-trichlorosilane (DTS) and octadecyl-trichlorosilane (OTS) found in previous studies, these two systems were chosen for the present investigation. The results reveal the molecular conformation of PS on silanized silicon. Differences in the molecular tilt of OTS and DTS are replicated by the adjacent phenyl rings of the PS. We discuss our findings in terms of a potential link between the microscopic interfacial structure and dynamic properties of polymeric liquids at interfaces.
Assuntos
Coloides/química , Cristalização/métodos , Modelos Químicos , Modelos Moleculares , Poliestirenos/química , Reologia/métodos , Simulação por Computador , Propriedades de SuperfícieRESUMO
In the course of miniaturization of electronic and microfluidic devices, reliable predictions of the stability of ultrathin films have a strategic role for design purposes. Consequently, efficient computational techniques that allow for a direct comparison with experiment become increasingly important. Here we demonstrate, for the first time, that the full complex spatial and temporal evolution of the rupture of ultrathin films can be modelled in quantitative agreement with experiment. We accomplish this by combining highly controlled experiments on different film-rupture patterns with computer simulations using novel numerical schemes for thin-film equations. For the quantitative comparison of the pattern evolution in both experiment and simulation we introduce a novel pattern analysis method based on Minkowski measures. Our results are fundamental for the development of efficient tools capable of describing essential aspects of thin-film flow in technical systems.