Adhesion Peptide-Functionalized Biobased Microgels for Controlled Delivery of Pesticides.

Widespread use of plant protection agents in agriculture is a major cause of pollution. Apart from active ingredients, the environmental impact of auxiliary synthetic polymers should be minimized if they are highly persistent. An alternative to synthetic polymers is the use of natural polysaccharides, which are abundant and biodegradable. In this study, we explore pectin microgels functionalized with anchor peptides (P-MAPs) to be used as an alternative biobased pesticide delivery system. Using copper as the active ingredient, P-MAPs effectively prevented infection of grapevine plants with downy mildew under semi-field conditions on par with commercial copper pesticides. By using anchor peptides, the microgels tightly bind to the leaf surface, exhibiting excellent rain fastness and prolonged fungicidal activity. Finally, P-MAPs are shown to be easily degradable by enzymes found in nature, demonstrating their negligible long-term impact on the environment.

A peptide-based coating toolbox to enable click chemistry on polymers, metals, and silicon through sortagging.

A versatile peptide-based toolbox for surface functionalization was established by a combination of a universal material binding peptide (LCI-anchor peptide) and sortase-mediated bioconjugation (sortagging). This toolbox facilitates surface functionalization either as a one- or a two-step strategy. In the case of the one-step strategy, the desired functionality was directly introduced to LCI. For the two-step strategy, LCI was modified with a reactive group, which can be further functionalized (e.g., employing "click" chemistry). Sortagging of LCI, employing sortase A from Staphylococcus aureus, was achieved with six different amine compounds: dibenzocyclooctyne amine, biotin-polyethylene glycol amine, Cyanine-3 amine, kanamycin, methoxypolyethylene glycol amine (Mn = 5000 Da), and 2,2,3,3,4,4,4-Heptafluorobutylamine. The purification of LCI-amine sortagging products was performed by a negative purification using Strep-tag II affinity chromatography, resulting in LCI-amine conjugates with purities >90%. For the two-step strategy, the LCI-dibenzocyclooctyne sortagging product was purified and enabled, through copper-free azide-alkyne "click" chemistry, universal surface functionalization of material surfaces such as polypropylene, polyethylene terephthalate, stainless steel, gold, and silicon. The click reaction was performed before or after surface binding of LCI-dibenzocyclooctyne. Finally, in the case of the one-step strategy, polypropylene was directly functionalized with Cyanine-3 and biotin-polyethylene glycol amine.

Matter-tag: A universal immobilization platform for enzymes on polymers, metals, and silicon-based materials.

Enzyme immobilization is extensively studied to improve enzyme properties in catalysis and analytical applications. Here, we introduce a simple and versatile enzyme immobilization platform based on adhesion-promoting peptides, namely Matter-tags. Matter-tags immobilize enzymes in an oriented way as a dense monolayer. The immobilization platform was established with three adhesion-promoting peptides; Cecropin A (CecA), liquid chromatography peak I (LCI), and Tachystatin A2 (TA2), that were genetically fused to enhanced green fluorescent protein and to two industrially important enzymes: a phytase (from Yersinia mollaretii) and a cellulase (CelA2 from a metagenomic library). Here, we report a universal and simple Matter-tag-based immobilization platform for enzymes on various materials including polymers (polystyrene, polypropylene, and polyethylene terephthalate), metals (stainless steel and gold), and silicon-based materials (silicon wafer). The Matter-tag-based enzyme immobilization is performed at ambient temperature within minutes (<10 min) in an aqueous solution harboring the phytase or cellulase by immersing the targeted material. The peptide LCI was identified as universal adhesion promoter; LCI immobilized both enzymes on all investigated materials. The attachment of phytase-LCI onto gold was characterized with surface plasmon resonance spectroscopy obtaining a dissociation constant value (KD ) of 2.9·10-8 M and a maximal surface coverage of 504 ng/cm².

MicroGelzymes: pH-Independent Immobilization of Cytochrome P450 BM3 in Microgels.

Microgels are an emerging class of "ideal" enzyme carriers because of their chemical and process stability, biocompatibility, and high enzyme loading capability. In this work, we synthesized a new type of permanently positively charged poly(N-vinylcaprolactam) (PVCL) microgel with 1-vinyl-3-methylimidazolium (quaternization of nitrogen by methylation of N-vinylimidazole moieties) as a comonomer (PVCL/VimQ) through precipitation polymerization. The PVCL/VimQ microgels were characterized with respect to their size, charge, swelling degree, and temperature responsiveness in aqueous solutions. P450 monooxygenases are usually challenging to immobilize, and often, high activity losses occur after the immobilization (in the case of P450 BM3 from Bacillus megaterium up to 100% loss of activity). The electrostatic immobilization of P450 BM3 in permanently positively charged PVCL/VimQ microgels was achieved without the loss of catalytic activity at the pH optimum of P450 BM3 (pH 8; ∼9.4 nmol 7-hydroxy-3-carboxy coumarin ethyl ester/min for free and immobilized P450 BM3); the resulting P450-microgel systems were termed P450 MicroGelzymes (P450 µ-Gelzymes). In addition, P450 µ-Gelzymes offer the possibility of reversible ionic strength-triggered release and re-entrapment of the biocatalyst in processes (e.g., for catalyst reuse). Finally, a characterization of the potential of P450 µ-Gelzymes to provide resistance against cosolvents (acetonitrile, dimethyl sulfoxide, and 2-propanol) was performed to evaluate the biocatalytic application potential.

Selective Functionalization of Microgels with Enzymes by Sortagging.

Enzyme immobilization has been widely used to improve the stability and recyclability of enzymes in industrial processes. In this work, a sortase-mediated and therefore selective covalent immobilization strategy (sortagging) for enzymes on microgels (GelZyms) was investigated. Aqueous microgels were synthesized from poly(N-vinylcaprolactam)/glycidyl methacrylate (PVCL/GMA) and tagged with the sortase A recognition peptide sequence (LPETG) or its nucleophilic counterpart-tag (GGG). General applicability and selective immobilization were confirmed by subsequent sortagging of five different enzymes (Bacillus subtilis lipase A (BSLA), Yersinia mollaretii phytase (Ym-phytase), Escherichia coli copper efflux oxidase (CueO laccase), cellulase A2, and Bacillus megaterium monooxygenase P450 BM3). The latter was performed directly from the cell lysate to ensure cost-effective immobilization. All five immobilized enzymes were catalytically active and could be recycled (e.g., laccase CueO and monooxygenase P450 BM3 F87A; >55% residual activity after six cycles). Application potential was demonstrated by using CueO decorated microgels for bleaching of the synthetic dye indigo carmine.

Anchor Peptide-Mediated Surface Immobilization of a Grubbs-Hoveyda-Type Catalyst for Ring-Opening Metathesis Polymerization.

Adhesion promoting peptides have been reported to enable efficient enzyme immobilization on various material surfaces. Here we report the first immobilization of a synthetic Grubbs-Hoveyda (GH) type catalyst on two different materials (silica and polypropylene). To this end, the GH catalyst was coupled to an engineered (F16C) variant of the adhesion promoting peptide LCI through thiol-maleimide "click" reaction. Immobilization was performed in an oriented manner through the adhesion promoting peptide by simple incubation with the materials in water and subsequent washing with water and tetrahydrofuran. The immobilized GH catalyst was probed in ring-opening metathesis polymerization of a norbornene derivative to alter the surface properties in a layer-by-layer fashion.

Ultrahigh-throughput screening system for directed polymer binding peptide evolution.

Accumulation of plastics in the environment became a geological indicator of the Anthropocene era. An effective reduction of long-lasting plastics requires a treatment with micro-organisms that release polymer-degrading enzymes. Polymer binding peptides function as adhesion promoters and enable a targeted binding of whole cells to polymer surfaces. An esterase A-based Escherichia coli cell surface display screening system was developed, that enabled directed evolution of polymer binding peptides for improved binding strength to polymers. The E. coli cell surface screening system facilitates an enrichment of improved binding peptides from a culture broth through immobilization of whole cells on polymer beads. The polypropylene (PP)-binding peptide liquid chromatography peak I (LCI) was simultaneously saturated at five positions (Y29, D31, G35, E42, and D45; 3.2 million variants) and screened for improved PP-binding in the presence of the anionic surfactant sodium dodecylbenzenesulfonate (LAS; 0.25 mM). The cell surface system enabled efficient screening of the generated LCI diversity (in total ~10 million clones were screened). Characterization of identified LCI binders revealed an up to 12-fold improvement (eGFP-LCI-CSD-3: E42V/D45H) in PP-binding strength in the presence of the surfactant LAS (0.125 mM). The latter represents a first whole cell display screening system to improve adhesion peptides which can be used to direct and to immobilize organisms specifically to polymer surfaces (e.g., PP) and novel applications (e.g., in targeted plastic degradation).

Stimuli-Responsive Poly( N-Vinyllactams) with Glycidyl Side Groups: Synthesis, Characterization, and Conjugation with Enzymes.

Herein we report the synthesis of new reactive stimuli-responsive polymers by RAFT copolymerization of glycidyl methacrylate and three cyclic N-vinyllactam derivatives. The copolymerization process was thoroughly investigated and the influence of the steric hindrance originating from the monomer structure of cyclic N-vinyllactams on the polymerization process and the properties of obtained copolymers were studied. A series of water-soluble copolymers with variable chemical composition, controlled molecular weight and narrow dispersity ( D) were synthesized and their properties are systematically investigated. Experimentally determined cloud points for different copolymers in aqueous solutions indicate shift of lower critical solution temperature (LCST) to lower values with the increase of GMA content in copolymers and increase of the lactam ring size. The obtained reactive stimuli-responsive copolymers can be efficiently used for encapsulation of cellulase in water-in-oil emulsions forming biohybrid nanogels. The enzymes entrapped in nanogels demonstrated significantly improved resistance against harsh store conditions, chaotropic agents, and organic solvents.

Directed evolution of polypropylene and polystyrene binding peptides.

Surface functionalization of biological inert polymers (e.g., polypropylene PP; polystyrene PS) with material binding peptides facilitates an efficient immobilization of enzymes, bioactive peptides or antigens at ambient temperature in water. The developed robust directed evolution protocol enables to tailor polymer binding anchor peptides (PBPs) for efficient binding under application conditions. Key for a successful directed evolution campaign was to develop an epPCR protocol with a very high mutation frequency (60 mutations/kb) to ensure sufficient diversity in PBPs (47 aas LCI: "liquid chromatography peak I"; 44 aas TA2: "Tachystatin A2"). LCI and TA2 were genetically fused to the reporter egfp to quantify peptide binding on PP and PS by fluorescence analysis. The Peptide-Polymer evolution protocol (PePevo protocol) was validated in two directed evolution campaigns for two PBPs and polymers (LCI: PP; TA2: PS). Surfactants were used as selection pressure for improved PBP binders (non-ionic surfactant Triton X-100; 1 mM for LCI-PP // anionic surfactant LAS; 0.5 mM for TA2-PS). PePevo yielded an up to three fold improved PP-binder (LCI-M1-PP: I24T, Y29H, E42 K and LCI-M2-PP: D31V, E42G) and an up to six fold stronger PS-binder (TA2-M1-PS: R3S, L6P, V12 K, S15P, C29R, R30L, F33S, Y44H and TA2-M2-PS: F9C, C24S, G26D, S31G, C41S, Y44Q).

Sortase-Mediated Surface Functionalization of Stimuli-Responsive Microgels.

In this work we explored an enzyme-mediated method for selective and efficient decoration of aqueous microgels with biomolecules. Poly(N-vinylcaprolactam) (VCL) microgels with varied amounts of glycidyl methacrylate (GMA) as comonomer incorporated in the microgel shell were synthesized and characterized in regard to their size, swelling degree, and temperature-responsiveness in aqueous solutions. The surface of the PVCL/GMA microgel containing 5 mol % glycidyl methyacrylate was modified by grafting of a specific recognition peptide sequence (LPETG) for Sortase A from Staphylococcus aureus (Sa-SrtAΔ59). Sortase-mediated conjugation of the enhanced Green Fluorescent Protein (eGFP) carrying a N-terminal triglycine tag to LPETG-modified microgels was successfully performed. Conjugation of eGFP to the microgel surface was qualitatively proven by confocal microscopy and by fluorescence intensity measurements. The developed protocol enables a precise control of the amount of eGFP grafted to the microgel surface as evidenced by the linear increase of fluorescence intensity of modified microgel samples. The kinetic of the sortase-mediated coupling reaction was determined by time-dependent fluorescence intensity measurements. In summary, sortase-mediated coupling reactions are a simple and powerful technique for targeted surface functionalization of stimuli-responsive microgels with biomolecules.

Tunable Enzymatic Activity and Enhanced Stability of Cellulase Immobilized in Biohybrid Nanogels.

This paper reports a facile approach for encapsulation of enzymes in nanogels. Our approach is based on the use of reactive copolymers able to get conjugated with enzyme and build 3D colloidal networks or biohybrid nanogels. In a systematic study, we address the following question: how the chemical structure of nanogel network influences the biocatalytic activity of entrapped enzyme? The developed method allows precise control of the enzyme activity and improvement of enzyme resistance against harsh store conditions, chaotropic agents, and organic solvents. The nanogels were constructed via direct chemical cross-linking of water-soluble reactive copolymers poly(N-vinylpyrrolidone-co-N-methacryloxysuccinimide) with proteins such as enhanced green fluorescent protein (EGFP) and cellulase in water-in-oil emulsion. The water-soluble reactive copolymers with controlled amount of reactive succinimide groups and narrow dispersity were synthesized via reversible addition-fragmentation chain transfer (RAFT) polymerization. Poly(ethylene glycol) bis(3-aminopropyl) and branched polyethylenimine were utilized as model cross-linkers to optimize synthesis of nanogels with different architectures in the preliminary experiments. Biofluorescent nanogels with different loading amount of EGFP and varying cross-linking densities were obtained. We demonstrate that the biocatalytic activity of cellulase-conjugated nanogels (CNG) can be elegantly tuned by control of their cross-linking degrees. Circular dichroism (CD) spectra demonstrated that the secondary structures of the immobilized cellulase were changed in the aspect of α-helix contents. The secondary structures of cellulase in highly cross-linked nanogels were strongly altered compared with loosely cross-linked nanogels. The fluorescence resonance energy transfer (FRET) based study further revealed that nanogels with lower cross-linking degree enable higher substrate transport rate, providing easier access to the active site of the enzyme. The biohybrid nanogels demonstrated significantly improved stability in preserving enzymatic activity compared with free cellulase. The functional biohybrid nanogels with tunable enzymatic activity and improved stability are promising candidates for applications in biocatalysis, biomass conversion, or energy utilization fields.

Reversible Deactivation of Enzymes by Redox-Responsive Nanogel Carriers.

Novel redox-responsive polymeric nanogels that allow highly efficient enzyme encapsulation and reversible modulation of enzyme activity are developed. The nanogel synthesis and encapsulation of enzyme are performed simultaneously via in situ crosslinking of pyridyldisulfide-functionalized water-soluble reactive copolymers, which are synthesized via reversible addition-fragmentation chain transfer copolymerization. Obtained nanogels with loaded cellulase demonstrate very good colloidal stability in aqueous solutions. The enzymatic activity of cellulase is greatly reduced when encapsulated in the nanogels and rapidly recovered in 10 × 10-3 m dithiothreitol solution. Fluorescence resonance energy transfer (FRET)-based experiments indicate that the recovered enzymatic activity is mainly ascribed to the release of the enzyme due to the degradation of the disulfide crosslinking network after addition of dithiothreitol (DTT), instead of the enhanced substrate transport rate. The developed enzyme immobilization method opens new possibilities for reversible activation/deactivation of enzymes and opens up new directions for targeted protein therapy and biotechnology applications.

Brush-Like Coatings Provide a Cloak of Invisibility to Titanium Implants.

Orthopedic implants such as knee and hip implants are one of the most important types of medical devices. Currently, the surface of the most advanced implants consists of titanium or titanium-alloys with high porosity at the bone-contacting surface leading to superior mechanical properties, excellent biocompatibility, and the capability of inducing osseointegration. However, the increased surface area of porous titanium provides a nidus for bacteria colonization leading to implant-related infections, one of the main reasons for implant failure. Here, two readily applicable titanium-coatings based on hydrophilic carboxybetaine polymers that turn the surface stealth thereby preventing bacterial adhesion and colonization are developed. These coatings are biocompatible, do not affect cell functionality, exhibit great antifouling properties, and do not cause additional inflammation during the healing process. In this way, the coatings can prevent implant-related infections, while at the same time being completely innocuous to its biological environment. Thus, these coating strategies are a promising route to enhance the biocompatibility of orthopedic implants and have a high potential for clinical use, while being easy to implement in the implant manufacturing process.

An enzymatic continuous-flow reactor based on a pore-size matching nano- and isoporous block copolymer membrane.

Continuous-flow biocatalysis utilizing immobilized enzymes emerged as a sustainable route for chemical synthesis. However, inadequate biocatalytic efficiency from current flow reactors, caused by non-productive enzyme immobilization or enzyme-carrier mismatches in size, hampers its widespread application. Here, we demonstrate a general-applicable and robust approach for the fabrication of a high-performance enzymatic continuous-flow reactor via integrating well-designed scalable isoporous block copolymer (BCP) membranes as carriers with an oriented and productive immobilization employing material binding peptides (MBP). Densely packed uniform enzyme-matched nanochannels of well-designed BCP membranes endow the desired nanoconfined environments towards a productive immobilized phytase. Tuning nanochannel properties can further regulate the complex reaction process and fortify the catalytic performance. The synergistic design of enzyme-matched carriers and efficient enzyme immobilization empowers an excellent catalytic performance with >1 month operational stability, superior productivity, and a high space-time yield (1.05 × 105 g L-1 d-1) via a single-pass continuous-flow process. The obtained performance makes the designed nano- and isoporous block copolymer membrane reactor highly attractive for industrial applications.

Rational Design Yields Molecular Insights on Leaf-Binding of Anchor Peptides.

In times of a constantly growing world population and increasing demand for food, sustainable agriculture is crucial. The rainfastness of plant protection agents is of pivotal importance to reduce the amount of applied nutrients, herbicides, and fungicides. As a result of protective agent wash-off, plant protection is lost, and soils and groundwater are severely polluted. To date, rainfastness of plant protection products has been achieved by adding polymeric adjuvants to the agrochemicals. However, polymeric adjuvants will be regarded as microplastics in the future, and environmentally friendly alternatives are needed. Anchor peptides (APs) are promising biobased and biodegradable adhesion promoters. Although the adhesion of anchor peptides to artificial surfaces, such as polymers, has already been investigated in theory and experimentally, exploiting the adhesion to biological surfaces remains challenging. The complex nature and composition of biological surfaces such as plant leaves and fruit surfaces complicate the generation of accurate models. Here, we present the first detailed three-layered atomistic model of the surface of apple leaves and use it to compute free energy profiles of the adhesion and desorption of APs to and from that surface. Our model is validated by a novel fluorescence-based microtiter plate (MTP) assay that mimics these complex processes and allows for quantifying them. For the AP Macaque Histatin, we demonstrate that aromatic and positively charged amino acids are essential for binding to the waxy apple leaf surface. The established protocols should generally be applicable for tailoring the binding properties of APs to biological interfaces.

A plea for the integration of Green Toxicology in sustainable bioeconomy strategies - Biosurfactants and microgel-based pesticide release systems as examples.

A key aspect of the transformation of the economic sector towards a sustainable bioeconomy is the development of environmentally friendly alternatives for hitherto used chemicals, which have negative impacts on environmental health. However, the implementation of an ecotoxicological hazard assessment at early steps of product development to elaborate the most promising candidates of lowest harm is scarce in industry practice. The present article introduces the interdisciplinary proof-of-concept project GreenToxiConomy, which shows the successful application of a Green Toxicology strategy for biosurfactants and a novel microgel-based pesticide release system. Both groups are promising candidates for industrial and agricultural applications and the ecotoxicological characterization is yet missing important information. An iterative substance- and application-oriented bioassay battery for acute and mechanism-specific toxicity within aquatic and terrestrial model species is introduced for both potentially hazardous materials getting into contact with humans and ending up in the environment. By applying in silico QSAR-based models on genotoxicity, endocrine disruption, skin sensitization and acute toxicity to algae, daphnids and fish, individual biosurfactants resulted in deviating toxicity, suggesting a pre-ranking of the compounds. Experimental toxicity assessment will further complement the predicted toxicity to elaborate the most promising candidates in an efficient pre-screening of new substances.

Enzyme mimetic microgel coating for endogenous nitric oxide mediated inhibition of platelet activation.

Nitric oxide (NO) continuously generated by healthy endothelium prevents platelet activation and maintains vascular homeostasis. However, when artificial surfaces, like of extracorporeal membrane oxygenator comes in contact with blood, protein adsorption and thereby platelet activation takes place, which eventually leads to thrombus formation. To overcome this, we present an antifouling microgel coating mimicking the function of enzyme glutathione peroxidase to endogenously generate NO in the blood plasma from endogenous NO-donors and maintain a physiological NO flux. Microgels are synthesized by copolymerization of highly hydrophilic N-(2-hydroxypropyl)methacrylamide (HPMA) and glycidyl methacrylate (GMA) with diselenide crosslinks. For immobilization of the microgels on hydrophobic poly(4-methylpentene) (TPX) membranes bioengineered amphiphilic anchor peptides with free thiols are used. The anchor peptide attaches to the TPX membranes by hydrophobic interactions while the free thiols are presented for crosslinking with the microgels. The hydrophilic nature of the microgel coating prevents protein adsorption while the reversible diselenide bridges make the microgels responsive to the reducing environment and lead to the formation of reactive selenols/selenolates. The generated selenols/selenolates provide an efficient and sustained NO-release from endogenous S-nitrosothiols (RSNOs) mimicking the enzymatic function of glutathione peroxidase. On exposure to the whole blood, the microgel coating inhibited platelet activation and prolonged the blood clotting time.

Unraveling the Mechanism and Kinetics of Binding of an LCI-eGFP-Polymer for Antifouling Coatings.

The ability of proteins to adsorb irreversibly onto surfaces opens new possibilities to functionalize biological interfaces. Herein, the mechanism and kinetics of adsorption of protein-polymer macromolecules with the ability to equip surfaces with antifouling properties are investigated. These macromolecules consist of the liquid chromatography peak I peptide from which antifouling polymer brushes are grafted using single electron transfer-living radical polymerization. Surface plasmon resonance spectroscopy reveals an adsorption mechanism that follows a Langmuir-type of binding with a strong binding affinity to gold. X-ray reflectivity supports this by proving that the binding occurs exclusively by the peptide. However, the lateral organization at the surface is directed by the cylindrical eGFP. The antifouling functionality of the unimolecular coatings is confirmed by contact with blood plasma. All coatings reduce the fouling from blood plasma by 8894% with only minor effect of the degree of polymerization for the studied range (DP between 101 and 932). The excellent antifouling properties, combined with the ease of polymerization and the straightforward coating procedure make this a very promising antifouling concept for a multiplicity of applications.

Targeting microplastic particles in the void of diluted suspensions.

Accumulation of microplastic in the environment and food chain will be a grand challenge for our society. Polyurethanes are widely used synthetic polymers in medical (e.g. catheters) and industrial products (especially as foams). Polyurethane is not abundant in nature and only a few microbial strains (fungi and bacteria) and enzymes (polyurethaneases and cutinases) have been reported to efficiently degrade polyurethane. Notably, in nature a long period of time (from 50 to >100 years depending on the literature) is required for degradation of plastics. Material binding peptides (e.g. anchor peptides) bind strongly to polymers such as polypropylene, polyethylene terephthalate, and polyurethane and can target specifically polymers. In this study we report the fusion of the anchor peptide Tachystatin A2 to the bacterial cutinase Tcur1278 which accelerated the degradation of polyester-polyurethane nanoparticles by a factor of 6.6 in comparison to wild-type Tcur1278. Additionally, degradation half-lives of polyester-polyurethane nanoparticles were reduced from 41.8 h to 6.2 h (6.7-fold) in a diluted polyester-polyurethane suspension (0.04% w/v).

Biadhesive Peptides for Assembling Stainless Steel and Compound Loaded Micro-Containers.

Biadhesive peptides (peptesives) are an attractive tool for assembling two chemically different materials-for example, stainless steel and polycaprolactone (PCL). Stainless steel is used in medical stents and PCL is used as a biodegradable polymer for fabrication of tissue growth scaffolds and drug delivering micro-containers. Biadhesive peptides are composed of two domains (e.g., dermaseptin S1 and LCI) with different material-binding properties that are separated through a stiff peptide-spacer. The peptesive dermaseptin S1-domain Z-LCI immobilizes antibiotic-loaded PCL micro-containers on stainless steel surfaces. Immobilization is visualized by microscopy and field emission scanning electron microscopy analysis and released antibiotic from the micro-containers is confirmed through growth inhibition of Escherichia coli cells.