Silk/Rayon Webs and Nonwoven Fabrics: Fabrication, Structural Characteristics, and Properties.

Silk is a naturally occurring material and has been widely used in biomedical and cosmetic applications owing to its unique properties, including blood compatibility, excellent cytocompatibility, and a low inflammatory response in the body. A natural silk nonwoven fabric with good mechanical properties was recently developed using the binding property of sericin. In this study, silk/rayon composite nonwoven fabrics were developed to increase productivity and decrease production costs, and the effect of the silk/rayon composition on the structure and properties of the fabric was examined. The crystalline structure of silk and rayon was maintained in the fabric. As the silk content increased, the porosity and moisture regain of the silk/rayon web and nonwoven fabric decreased. As the silk content increased, the maximum stress of the web and nonwoven fabric increased, and the elongation decreased. Furthermore, the silk/rayon web exhibited the highest values of maximum stress and elongation at ~200 °C. Regardless of the silk/rayon composition, all silk/rayon nonwoven fabrics showed good cytocompatibility. Thus, the silk/rayon fabric is a promising material for cosmetic and biomedical applications owing to its diverse properties and high cell viability.

Differentiation and Establishment of Dental Epithelial-Like Stem Cells Derived from Human ESCs and iPSCs.

Tooth development and regeneration occur through reciprocal interactions between epithelial and ectodermal mesenchymal stem cells. However, the current studies on tooth development are limited, since epithelial stem cells are relatively difficult to obtain and maintain. Human embryonic stem cells (hESCs) and induced pluripotent stem cells (hiPSCs) may be alternative options for epithelial cell sources. To differentiate hESCs/hiPSCs into dental epithelial-like stem cells, this study investigated the hypothesis that direct interactions between pluripotent stem cells, such as hESCs or hiPSCs, and Hertwig's epithelial root sheath/epithelial rests of Malassez (HERS/ERM) cell line may induce epithelial differentiation. Epithelial-like stem cells derived from hES (EPI-ES) and hiPSC (EPI-iPSC) had morphological and immunophenotypic characteristics of HERS/ERM cells, as well as similar gene expression. To overcome a rare population and insufficient expansion of primary cells, EPI-iPSC was immortalized with the SV40 large T antigen. The immortalized EPI-iPSC cell line had a normal karyotype, and a short tandem repeat (STR) analysis verified that it was derived from hiPSCs. The EPI-iPSC cell line co-cultured with dental pulp stem cells displayed increased amelogenic and odontogenic gene expression, exhibited higher dentin sialoprotein (DSPP) protein expression, and promoted mineralized nodule formation. These results indicated that the direct co-culture of hESCs/hiPSCs with HERS/ERM successfully established dental epithelial-like stem cells. Moreover, this differentiation protocol could help with understanding the functional roles of cell-to-cell communication and tissue engineering of teeth.

Mutations in DDX58, which encodes RIG-I, cause atypical Singleton-Merten syndrome.

Singleton-Merten syndrome (SMS) is an autosomal-dominant multi-system disorder characterized by dental dysplasia, aortic calcification, skeletal abnormalities, glaucoma, psoriasis, and other conditions. Despite an apparent autosomal-dominant pattern of inheritance, the genetic background of SMS and information about its phenotypic heterogeneity remain unknown. Recently, we found a family affected by glaucoma, aortic calcification, and skeletal abnormalities. Unlike subjects with classic SMS, affected individuals showed normal dentition, suggesting atypical SMS. To identify genetic causes of the disease, we performed exome sequencing in this family and identified a variant (c.1118A>C [p.Glu373Ala]) of DDX58, whose protein product is also known as RIG-I. Further analysis of DDX58 in 100 individuals with congenital glaucoma identified another variant (c.803G>T [p.Cys268Phe]) in a family who harbored neither dental anomalies nor aortic calcification but who suffered from glaucoma and skeletal abnormalities. Cys268 and Glu373 residues of DDX58 belong to ATP-binding motifs I and II, respectively, and these residues are predicted to be located closer to the ADP and RNA molecules than other nonpathogenic missense variants by protein structure analysis. Functional assays revealed that DDX58 alterations confer constitutive activation and thus lead to increased interferon (IFN) activity and IFN-stimulated gene expression. In addition, when we transduced primary human trabecular meshwork cells with c.803G>T (p.Cys268Phe) and c.1118A>C (p.Glu373Ala) mutants, cytopathic effects and a significant decrease in cell number were observed. Taken together, our results demonstrate that DDX58 mutations cause atypical SMS manifesting with variable expression of glaucoma, aortic calcification, and skeletal abnormalities without dental anomalies.

Cell-selectivity of tryptophan and tyrosine in amphiphilic α-helical antimicrobial peptides against drug-resistant bacteria.

The increasing emergence of drug-resistant bacteria creates a requirement for new antibiotics and various types of antibiotic materials such as proteins, peptides, polymers, and chemical compounds. Among these, antimicrobial peptides (AMPs) are considered to be promising antibiotic candidates for clinical treatments. In this study, we have designed a novel series of peptides with repeated sequences of minimum membrane-active motif, 'XWZX' basic sequence (X: lysine or arginine, Z: leucine, tyrosine, valine, or glycine), and an α-helical secondary structure. Some peptides displayed a potent antibacterial activity via membranolytic action and high therapeutic index (toxic dose/minimum inhibitory concentration) in vitro. Furthermore, in vivo experiments using bacterial ear-skin infection models verified that these peptides have the potential to be powerful and safe antibiotics. The present study provides a lead sequence for designing peptide antibiotics against bacterial membranes and information for cell-selectivity of hydrophobic amino acids with aromatic side chains such as Trp and Tyr.

Horizontal and Vertical Distribution of Microplastics in Korean Coastal Waters.

This is the first survey to investigate the vertical distribution and composition of microplastics >20 µm at the surface (0-0.2 m; bulk sample) and in the water column (3-58 m depth; pump) of six semi-enclosed bays and two nearshore areas of South Korea. The average microplastic abundance of 41 stations at all sampling depths was 871 particles/m3, and the microplastic abundance near urban areas (1051 particles/m3) was significantly higher than that near rural areas (560 particles/m3). Although the average microplastic abundances in the midcolumn (423 particles/m3) and bottom water (394 particles/m3) were approximately 4 times lower than that of surface water (1736 particles/m3), microplastics prevailed throughout the water column in concentrations of 10-2000 particles/m3. The average sizes of fragment and fiber type microplastics were 197 and 752 µm, respectively. Although the polymer composition differed by depth depending on the particle size and density, polypropylene and polyethylene predominated throughout the water column regardless of their low density and particle size. Finally, the middle and bottom water samples contained higher abundances of microplastics than predicted by a model based on physical mixing, indicating that biological interactions also influence the downward movement of low-density microplastics.

Combined Effects of UV Exposure Duration and Mechanical Abrasion on Microplastic Fragmentation by Polymer Type.

It is important to understand the fragmentation processes and mechanisms of plastic litter to predict microplastic production in the marine environment. In this study, accelerated weathering experiments were performed in the laboratory, with ultraviolet (UV) exposure for up to 12 months followed by mechanical abrasion (MA) with sand for 2 months. Fragmentation of low-density polyethylene (PE), polypropylene (PP), and expanded polystyrene (EPS) was evaluated under conditions that simulated a beach environment. PE and PP were minimally fragmented by MA without photooxidation by UV (8.7 ± 2.5 and 10.7 ± 0.7 particles/pellet, respectively). The rate of fragmentation by UV exposure duration increased more for PP than PE. A 12-month UV exposure and 2-month MA of PP and PE produced 6084 ± 1061 and 20 ± 8.3 particles/pellet, respectively. EPS pellets were susceptible to MA alone (4220 ± 33 particles/pellet), while the combination of 6 months of UV exposure followed by 2 months of MA produced 12,152 ± 3276 particles/pellet. The number of fragmented polymer particles produced by UV exposure and mechanical abrasion increased with decreasing size in all polymer types. The size-normalized abundance of the fragmented PE, PP, and EPS particles according to particle size after UV exposure and MA was predictable. Up to 76.5% of the initial EPS volume was unaccounted for in the final volume of pellet produced particle fragments, indicating that a large proportion of the particles had fragmented into undetectable submicron particles.

Styrofoam Debris as a Source of Hazardous Additives for Marine Organisms.

There is growing concern over plastic debris and their fragments as a carrier for hazardous substances in marine ecosystem. The present study was conducted to provide field evidence for the transfer of plastic-associated chemicals to marine organisms. Hexabromocyclododecanes (HBCDs), brominated flame retardants, were recently detected in expanded polystyrene (styrofoam) marine debris. We hypothesized that if styrofoam debris acts as a source of the additives in the marine environment, organisms inhabiting such debris might be directly influenced by them. Here we investigated the characteristics of HBCD accumulation by mussels inhabiting styrofoam. For comparison, mussels inhabiting different substrates, such as high-density polyethylene (HDPE), metal, and rock, were also studied. The high HBCD levels up to 5160 ng/g lipid weight and the γ-HBCD dominated isomeric profiles in mussels inhabiting styrofoam strongly supports the transfer of HBCDs from styrofoam substrate to mussels. Furthermore, microsized styrofoam particles were identified inside mussels, probably originating from their substrates.

Occurrence and Distribution of Microplastics in the Sea Surface Microlayer in Jinhae Bay, South Korea.

Microplastic contamination of the marine environment is a worldwide concern. The abundance of microplastics was evaluated in the sea surface microlayer in Jinhae Bay, on the southern coast of Korea. The microplastics in this study are divided into paint resin particles and plastics by polymer type. The mean abundance of paint resin particles (94 ± 68 particles/L) was comparable to that of plastics (88 ± 68 particles/L). Fragmented microplastics, including paint resin particles, accounted for 75 % of total particles, followed by spherules (14 %), fibers (5.8 %), expanded polystyrene (4.6 %), and sheets (1.6 %). Alkyd (35 %) and poly(acrylate/styrene) (16 %) derived from ship paint resin were dominant, and the other microplastic samples consisted of polypropylene, polyethylene, phenoxy resin, polystyrene, polyester, synthetic rubber, and other polymers. The abundance of plastics was significantly (p < 0.05) higher in Jinhae Bay, which is surrounded by a coastal city, than along the east coast of Geoje, which is relatively open sea. The floating microplastic abundance in surface water was the highest reported worldwide.

Qualitative Analysis of Additives in Plastic Marine Debris and Its New Products.

Due to their formulation and/or processing, plastics contain additives and impurities that may leach out under conditions of use and accumulate in the environment. To evaluate their role as vectors of chemical contaminants in marine environment, plastic debris (n = 19) collected from coastal beaches along with new plastics (n = 25; same or same brand) bought from local markets were screened by gas chromatography-mass spectrometry in full scan mode. Detected peaks were identified using NIST library in different polymers (polypropylene (PP) > polyethylene (PE) > PP + PE > polyethyl terephthalate > poly(acylene:styrene) with different use (food, fishery, and general use). A database on the presence of 231 different chemicals were grouped into hydrocarbons, ultra-violet (UV)-stabilizers, antioxidants, plasticizers, lubricants, intermediates, compounds for dyes and inks, flame retardants, etc. The UV326, UV327, UV328, UV320, UvinualMC80, irganox 1076, DEHP, antioxidant no 33, di-n-octylisophthalate, diisooctyl phthalate, hexanoic acid 2-ethyl-hexadecyl ester, and hydrocarbons were most frequently detected. Finding of toxic phthalates and UV stabilizers in those products having moisture contact (like bottles with short use) raised concern to humans and indicated their irregular use. The comparison between new and debris plastics clearly indicated the leaching and absorption of chemicals and supports our assumption of plastic as media for transferring these additives in marine environment.

Distribution and Size Relationships of Plastic Marine Debris on Beaches in South Korea.

The characteristics of the distribution of plastic marine debris were determined on 12 beaches in South Korea in 2013 and 2014. The abundances of large micro- (1-5 mm), meso- (5-25 mm), and macroplastics (>25 mm) were 880.4, 37.7, and 1.0 particles/m(2), respectively. Styrofoam was the most abundant debris type for large microplastics and mesoplastics (99.1 and 90.9 %, respectively). Fiber (including fabric) was the most abundant of the macroplastics (54.7 %). There were no statistical differences in the mean numbers and weights of plastic debris among three beach groups from west, south, and east coasts. No significant differences were detected between the abundances of beached plastics in high strandline and backshore for all three size groups. Spearman's rank correlation was used to determine the relationships between the three debris size classes. The abundance of large microplastics was strongly correlated with that of mesoplastics for most material types, which suggests that the contamination level of large microplastics can be estimated from that of mesoplastics. As surveying of smaller particles is more labor intensive, the surveying of mesoplastics with a 5-mm sieve is an efficient and useful way to determine "hot-spots" on beaches contaminated with large microplastics.

Large accumulation of micro-sized synthetic polymer particles in the sea surface microlayer.

Determining the exact abundance of microplastics on the sea surface can be susceptible to the sampling method used. The sea surface microlayer (SML) can accumulate light plastic particles, but this has not yet been sampled. The abundance of microplastics in the SML was evaluated off the southern coast of Korea. The SML sampling method was then compared to bulk surface water filtering, a hand net (50 µm mesh), and a Manta trawl net (330 µm mesh). The mean abundances were in the order of SML water > hand net > bulk water > Manta trawl net. Fourier transform infrared spectroscopy (FTIR) identified that alkyds and poly(acrylate/styrene) accounted for 81 and 11%, respectively, of the total polymer content of the SML samples. These polymers originated from paints and the fiber-reinforced plastic (FRP) matrix used on ships. Synthetic polymers from ship coatings should be considered to be a source of microplastics. Selecting a suitable sampling method is crucial for evaluating microplastic pollution.

Improved performance and stability of field-effect transistors with polymeric residue-free graphene channel transferred by gold layer.

One of the most significant issues that occurs when applying chemical-vapor deposited (CVD) graphene (Gr) to various high-performance device applications is the result of polymeric residues. Polymeric residues remain on the Gr surface during Gr polymer support transfer to an arbitrary substrate, and these residues degrade CVD Gr electrical properties. In this paper, we propose that a thin layer of gold be used as a CVD Gr transfer layer, instead of a polymer support layer, to enable a polymer residue-free transfer. Comparative investigation of the surface morphological and qualitative analysis of residues on Gr surfaces and Gr field-effect transistors (GFETs) using two transfer methods demonstrates that gold-transferred Gr, with uniform, smooth, and clean surfaces, enable GFETs to perform better than Gr transferred by the polymer, polymethylmethacrylate (PMMA). In GFETs fabricated by the gold transfer method, field-effect carrier mobility was greatly enhanced and the position of the Dirac point was significantly reduced compared to GFETs fabricated by the PMMA transfer method. In addition, compared to the PMMA-transferred GFETs, the gold-transferred GFETs showed greatly increased stability with smaller hysteresis and higher resistance to gate bias stress effects. These results suggest that the gold transfer method for Gr provides significant improvements in GFET performance and reliability by minimizing the polymeric residues and defects on Gr.

Differentiation of Human-induced Pluripotent Stem Cell-derived Dental Stem Cells through Epithelial-Mesenchymal Interaction.

Research on tooth regeneration using human-induced pluripotent stem cells (hiPSCs) is valuable for autologous dental regeneration. Acquiring mesenchymal and epithelial cells as a resource for dental regeneration is necessary because mesenchymal-epithelial interactions play an essential role in dental development. We reported the establishment of hiPSCs-derived dental epithelial-like cell (EPI-iPSCs), but hiPSCs-derived dental mesenchymal stem cells (MSCs) have not yet been reported. This study was conducted to establish hiPSCs-derived MSCs and to differentiate them into dental cells with EPI-iPSCs. Considering that dental MSCs are derived from the neural crest, hiPSCs were induced to differentiate into MSCs through neural crest formation to acquire the properties of dental MSCs. To differentiate hiPSCs into MSCs through neural crest formation, established hiPSCs were cultured and differentiated with PA6 stromal cells and differentiated hiPSCs formed neurospheres on ultralow-attachment plates. Neurospheres were differentiated into MSCs in serum-supplemented medium. Neural crest-mediated MSCs (NC-MSCs) continuously showed typical MSC morphology and expressed MSC markers. After 8 days of odontogenic induction, the expression levels of odontogenic/mineralization-related genes and dentin sialophosphoprotein (DSPP) proteins were increased in the NC-MSCs alone group in the absence of coculturing with dental epithelial cells. The NC-MSCs and EPI-iPSCs coculture groups showed high expression levels of amelogenesis/odontogenic/mineralization-related genes and DSPP proteins. Furthermore, the NC-MSCs and EPI-iPSCs coculture group yielded calcium deposits earlier than the NC-MSCs alone group. These results indicated that established NC-MSCs from hiPSCs have dental differentiation capacity with dental epithelial cells. In addition, it was confirmed that hiPSCs-derived dental stem cells could be a novel cell source for autologous dental regeneration.

Cpne7 deficiency induces cellular senescence and premature aging of dental pulp.

Once tooth development is complete, odontoblasts and their progenitor cells in the dental pulp play a major role in protecting tooth vitality from external stresses. Hence, understanding the homeostasis of the mature pulp populations is just as crucial as understanding that of the young, developing ones for managing age-related dentinal damage. Here, it is shown that loss of Cpne7 accelerates cellular senescence in odontoblasts due to oxidative stress and DNA damage accumulation. Thus, in Cpne7-null dental pulp, odontoblast survival is impaired, and aberrant dentin is extensively formed. Intraperitoneal or topical application of CPNE7-derived functional peptide, however, alleviates the DNA damage accumulation and rescues the pathologic dentin phenotype. Notably, a healthy dentin-pulp complex lined with metabolically active odontoblasts is observed in 23-month-old Cpne7-overexpressing transgenic mice. Furthermore, physiologic dentin was regenerated in artificial dentinal defects of Cpne7-overexpressing transgenic mice. Taken together, Cpne7 is indispensable for the maintenance and homeostasis of odontoblasts, while promoting odontoblastic differentiation of the progenitor cells. This research thereby introduces its potential in oral disease-targeted applications, especially age-related dental diseases involving dentinal loss.

Butyrate production in engineered Escherichia coli with synthetic scaffolds.

Butyrate pathway was constructed in recombinant Escherichia coli using the genes from Clostridium acetobutylicum and Treponema denticola. However, the pathway constructed from exogenous enzymes did not efficiently convert carbon flux to butyrate. Three steps of the productivity enhancement were attempted in this study. First, pathway engineering to delete metabolic pathways to by-products successfully improved the butyrate production. Second, synthetic scaffold protein that spatially co-localizes enzymes was introduced to improve the efficiency of the heterologous pathway enzymes, resulting in threefold improvement in butyrate production. Finally, further optimizations of inducer concentrations and pH adjustment were tried. The final titer of butyrate was 4.3 and 7.2 g/L under batch and fed-batch cultivation, respectively. This study demonstrated the importance of synthetic scaffold protein as a useful tool for optimization of heterologous butyrate pathway in E. coli.

Plastic debris as a mobile source of additive chemicals in marine environments: In-situ evidence.

Plastic debris can act as a source of hazardous chemicals in the ocean, but the significance of its role in the environment is not yet known. To address this question, a comprehensive field study of highly contaminated and non-contaminated islands was conducted. Comparison of the plastic additive hexabromocyclododecanes and ubiquitous contaminants polychlorinated biphenyls in marine invertebrates showed that the load of stranded plastics plays a significant role in the bioaccumulation of plastic additives in the marine debris-contaminated island. Fugacity analysis indicates that net flow of hexabromocyclododecanes occurred from plastics to environmental reservoirs. Additionally, significantly higher levels of antioxidants, 2,4-di-tert-butylphenol and butylated hydroxytoluene, was found in the marine invertebrates inhabiting the marine debris-contaminated island than those inhabiting the marine debris-noncontaminated island, but ultraviolet stabilizers did not show the regional difference. This study provides the first field evidence that the movement of plastic debris in the ocean drives the dispersal of plastic additives to pristine waters.

Intra-annual variation in microplastics in mussels (Mytilus galloprovincialis) inhabiting an urbanized bay of South Korea.

This study investigated the presence of microplastics (MPs) in mussels from an urbanized bay in Korea, focusing on intra-annual variation. The average MP concentration was 0.36 ± 0.14 n/g w.w. (1.24 ± 0.56 n/individual). MPs were detected throughout the year with minor monthly variation and no significant monthly changes. Although there was no correlation between MP concentration in mussel and seawater, a positive relationship was observed when normalizing MPs to mussel's condition index (except for July). Polypropylene, polyethylene and acrylate polymer were dominant MPs, with high-density polymers comprising 59 % of the total. Most MPs were fragments and particles <200 µm. This study indicates that strict time restrictions for mussel sampling may not be necessary to assess MP levels in this bay. Additionally, considering MPs in seawater, biological conditions of mussel may be essential for understanding variations in MP levels in mussels. Including small MPs (<200 µm) and high-density polymers in MP assessment is recommended.

The effects of environmental Microplastic on wharf roach (Ligia exotica): A Multi-Omics approach.

This is the first report to evaluate the potential effects of microplastics (MPs) on wild wharf roaches (Ligia exotica) in a shoreline habitant. L. exotica is an important plastic detritus consumer in coastal area. A survey was conducted from May to June in the years 2019 and 2020 in two South Korean nearshore sites: Nae-do (as MPs-uncontaminated) and Maemul-do (as MPs-contaminated). MPs (>20 µm in size) were detected highly in gastrointestinal tracts of the L. exotica from Maemul-do, at an average level of 50.56 particles/individual. They were detected in much lower levels in the L. exotica from Nae-do. at an average rate of 1.00 particles/individual. The polymer type and shape were dominated by expanded polystyrene (EPS, 93%) and fragment (99.9%) in L. exotica from Maemul-do. Especially, Hexabromocyclododecanes, brominated flame retardants added to EPS, have been detected highly in L. exotica from Maemul-do (630.86 ± 587.21 ng/g l. w.) than those of Nae-do (detection limit: 10.5 ng/g l. w). Genome-wide transcriptome profiling revealed altered expression of genes associated with fatty acid metabolic processes, the innate-immune response-activating system and vesicle cytoskeletal trafficking in L. exotica from Maemul-do. The activation of the p53 signaling pathway (which is related to proteasome, ER regulation and cell morphogenesis) is likely to be involved in the EPS-uptake of wild L. exotica. Four neurosteroids were also detected in head tissue, and cortisol and progesterone concentrations differed significantly in L. exotica from Maemul-do. Our findings also suggest that resident plastic detritus consumer might be a useful indicator organism for evaluating pollution and potential effects of environmental microplastics.

Polyethylenimine grafted-chitosan based Gambogic acid copolymers for targeting cancer cells overexpressing transferrin receptors.

Recent advancements in gene delivery systems that specifically target a variety of cancer types have increased demand for tissue-specific gene therapy. The current study describes the synthesis of a copolymer (GPgWSC) composed of a polyethylenimine (PEI)-grafted water-soluble chitosan (WSC) and gambogic acid (GA). It was validated as a ligand capable of enabling targeted attachment to transferrin receptors in HCT116 cancer cell lines. GPgWSC demonstrated superior antitumor activity in vitro in HCT116 compared to LoVo or MCF-7 cell lines, facilitated by the apoptotic activity of psiRNA-hBCL2. Pre-incubation of transferrin significantly inhibited GFP expression in the GPgWSC polyplex, demonstrating that GA is an extremely effective transferrin receptor targeting molecule. Additionally, in the HCT116-bearing mouse model, the tumor mass of PBS-treated mice increased to 2270 mm2 after 22 days, but the injection of GPgWSC polyplex significantly reduced the mass-increasing rate as a mass size of 248 mm2.

Relative importance of aqueous leachate versus particle ingestion as uptake routes for microplastic additives (hexabromocyclododecane) to mussels.

Microplastic pollution is emerging as a global environmental issue, and its potential for transferring hazardous chemicals to aquatic organisms is gaining attention. Studies have investigated the transfer of chemicals, mainly sorbed chemicals, through ingestion of microplastics by organisms, but limited information is available regarding chemical additives and uptake via the aqueous route through plastic leaching. In this study, we compared two bioaccumulation pathways of the additive hexabromocyclododecane (HBCD) by exposing mussels (Mytilus galloprovincialis) to two different sizes of expanded polystyrene (EPS): inedible size (4.2-5.5 mm) for leachate uptake and edible size (20-770 µm) for particle ingestion and leachate uptake. Over 10 days, the HBCD concentration increased significantly in mussels in the EPS exposure groups, indicating that EPS microplastic acts as a source of HBCD to mussels. The concentration and isomeric profiles of HBCD in mussels show that uptake through the aqueous phase is a more significant pathway for bioaccumulation of HBCD from EPS to mussels than particle ingestion. HBCD levels measured in EPS, leachate and exposed mussels from this study are environmentally relevant concentration. The fate and effects of chemical additives leached from plastic debris in ecosystem requires further investigation, as it may affect numerous environments and organisms through the aqueous phase.