Epigenetic-based combination therapy and liposomal codelivery overcomes osimertinib-resistant NSCLC via repolarizing tumor-associated macrophages.

Osimertinib (Osi) is widely used as a first-line treatment for non-small cell lung cancer (NSCLC) with EGFR mutations. However, the majority of patients treated with Osi eventually relapse within a year. The mechanisms of Osi resistance remain largely unexplored, and efficient strategies to reverse the resistance are urgently needed. Here, we developed a lactoferrin-modified liposomal codelivery system for the combination therapy of Osi and panobinostat (Pan), an epigenetic regulator of histone acetylation. We demonstrated that the codelivery liposomes could efficiently repolarize tumor-associated macrophages (TAM) from the M2 to M1 phenotype and reverse the epithelial-mesenchymal transition (EMT)-associated drug resistance in the tumor cells, as well as suppress glycolysis, lactic acid production, and angiogenesis. Our results suggested that the combination therapy of Osi and Pan mediated by liposomal codelivery is a promising strategy for overcoming Osi resistance in NSCLC.

Co-delivery of F7 and crizotinib by thermosensitive liposome for breast cancer treatment.

In order to enhance the targeting efficiency and reduce the side effects and drug resistance, crizotinib (Cri) and F7 were co-loaded in a thermosensitive liposome (TSL) (F7-Cri-TSL), which showed enhanced permeability and retention in breast cancer model, as well as local controlled release by external hyperthermia. Cri is an inhibitor for cell proliferation and a promoter of apoptosis, by inhibiting the phosphorylation of intracellular ALK and c-Met, but its drug resistance limits its application. F7 is a novel drug candidate with significant resistance to cyclin-dependent kinase, but its use was restricted by its high toxicity. The F7-Cri-TSL was found with excellent particle size (about 108 nm), high entrapment efficiency (>95%), significant thermosensitive property, and good stability. Furthermore, F7-Cri-TSL/H had strongest cell lethality compared with other formulations. On the MCF-7 xenograft mice model, the F7-Cri-TSL also exhibited therapeutic synergism of Cri, F7 and hyperthermia. Meanwhile, it was shown that the TSL reduced the systemic toxicity of the chemotherapy drug. Therefore, the F7-Cri-TSL may serve as a promising system for temperature triggered breast cancer treatment.

A Novel Missense Variant in the TCOF1 Gene in one Chinese Case With Treacher Collins Syndrome.

The purpose of this study is to analyze the clinical characteristics of a Treacher Collins syndrome (TCS) patient carrying a de novo variant of TCOF1, and briefly analyze the correlation between genetic results and clinical features. Also, the pathogenesis and clinical treatment of TCS are reviewed.A Chinese pedigree with TCS containing 8 members was enrolled. Phenotype of the proband was evaluated by a surgeon, then whole exome sequencing of the proband was performed. Then we verified the proband-derived variants by Sanger sequencing in the pedigree. Correlation between genotype and phenotype was analyzed.The study was conducted in a stomatological hospital.A Chinese pedigree with TCS containing 8 members.To ascertain the genetic variants in the Chinese pedigree with TCS.Blood samples were collected.We reported a case of typical TCS with a de novo missense variant (NM_001371623.1:c.38T>G, p.(Leu13Arg)) in exon 1 of TCOF1, who presented asymmetrical facial abnormalities, including downward slanting of the palpebral fissures, sparse eyebrows, lateral tilt of the eyeballs, bilateral external ears deformities, hypoplasia of midface, reduction of the zygomatic body, bilateral orbital invagination, right external auditory canal atresia, mandibular ramus short deformity, cleft palate and the whole face was convex.This research found a novel variant of TCS in Chinese, expanding the spectrum of TCS pathogenic variants. Genetic results combined with clinical phenotype can make a definite diagnosis and provide genetic counseling for the family.

Relationship between periodontal disease and male infertility: A case-control study.

OBJECTIVES: To compare the prevalence of chronic periodontitis between men who had semen abnormalities and those who had normozoospermia through a case-control study. MATERIALS AND METHODS: Male patients who visited the assisted reproduction clinic of a large general hospital and were diagnosed with semen abnormalities were included in the case group. The control group was composed of patients of the same clinic with normozoospermia. The semen analysis included sperm concentration, count and progressive and total motility, which were measured in the laboratory. A questionnaire and clinical periodontal examination were conducted for all participants. Logistic regression was performed to explore the relationship between chronic periodontitis and male infertility. RESULTS: A total of 192 participants were included: 63 participants (32.8%) had some type of semen abnormality (case group), while 129 participants (67.2%) had normozoospermia (control group). The case group had a significantly higher prevalence of moderate/severe periodontitis than the control group (33.3% vs. 17.8%, p = .012). The logistic regression showed that participants who had moderate/severe periodontitis had a greater chance of having semen abnormalities after adjusting for other confounding factors (OR = 3.377, p = .005). CONCLUSIONS: Periodontitis is associated with semen abnormalities and sperm motility in men.

Effects of microplastics (MPs) and tributyltin (TBT) alone and in combination on bile acids and gut microbiota crosstalk in mice.

Microplastics (MPs) and tributyltin (TBT) are both potential environmental pollutants that enter organisms through the food chain and affect bodily functions. However, the effects and mechanisms of MPs and TBT exposure (especially the co-exposure of both pollutants) on mammals remain unclear. In this study, Ф5µm MPs (5MP) was administered alone or in combination with TBT to investigate the health risk of oral exposure in mice. All three treatments induced inflammation in the liver, altered gut microbiota composition and disturbed fecal bile acids profiles. In addition to decreasing triglyceride (TG) and increasing aspartate aminotransferase (AST) and macrophage-expressed gene 1 (Mpeg1), 5MP induced hepatic cholestasis by stimulating the expression of the cholesterol hydroxylase enzymes CYP8B1 and CYP27A1, and inhibiting multidrug resistance-associated protein 2 and 3 (MRP2, MRP3), and bile-salt export pump (BSEP) to prevent bile acids for entering the blood and bile. Correspondingly, 5MP treatment decreased 7-ketolithocholic acid (7-ketoLCA) and taurocholic acid (TCA), which were positively correlated with decreased Bacteroides and Marvinbryantia and negatively correlated with increased Bifidobacterium. In addition, TBT increased interferon γ (IFNγ) and Mpeg1 levels to induce inflammation, accompanied by decreased 7-ketoLCA, tauro-alpha-muricholic acid (T-alpha-MCA) and alpha-muricholic acid (alpha-MCA) levels, which were negatively related to Coriobacteriaceae_UCG-002 and Bifidobacterium. Co-exposure to 5MP and TBT also decreased TG and induced bile acids accumulation in the liver due to inhibited BSEP, which might be attributed to the co-regulation of decreased T-alpha-MCA and Harryflintia. In conclusion, the administration of 5MP and TBT alone and in combination could cause gut microbiome dysbiosis and subsequently alter bile acids profiles, while the combined exposure of 5MP and TBT weakened the toxic effects of 5MP and TBT alone.

Development of a Rapid Approach for Detecting Sharp Eyespot Resistance in Seedling-Stage Wheat and Its Application in Chinese Wheat Cultivars.

Sharp eyespot, caused by Rhizoctonia cerealis, has become one of the most severe diseases affecting global wheat production in recent decades. Quick and efficient screening methods are required to accelerate the development of cultivars for sharp eyespot resistance in wheat breeding. Here, a two-step colonized wheat kernels (TSCWK) method for the inoculation and classification of sharp eyespot resistance in seedlings was established in a greenhouse. After preliminary verification of the reliability of the method in two replicates, 196 wheat cultivars were assessed for sharp eyespot resistance, and significant correlations were identified among the four replicates (r = 0.78 to 0.84; P < 0.01). Furthermore, the 196 cultivars were scored for sharp eyespot resistance at the milk-ripe stage using traditional toothpick inoculation in the field. Correlation and linear regression analysis showed that the application of this approach at the seedling stage showed good consistency with the traditional field method. Moreover, the scoring of 442 cultivars using the TSCWK method indicated that most cultivars from the Huanghuai valley were susceptible to R. cerealis, suggesting an urgent need to improve sharp eyespot resistance in this region. Additionally, the relative resistance index of sharp eyespot decreased in the surveyed cultivars of the region with time. This study offers a rapid and effective approach for the identification of wheat sharp eyespot resistance and provides valuable germplasm for improving sharp eyespot resistance in wheat breeding.

Combination therapy of oxidised regenerated cellulose/collagen/silver dressings with negative pressure wound therapy for coverage of exposed critical structures in complex lower-extremity wounds.

Complex wounds with exposed critical structures such as tendon and bone are a conundrum in wound management, especially in the setting where the patient is not a suitable candidate for flap surgery. While the individual use of negative pressure wound therapy (NPWT) and oxidised regenerated cellulose (ORC)/collagen/silver (PROMOGRAN PRISMA) dressing has been described in the literature, there are little data on the efficacy of their combined use. In this study, we describe a novel technique of combining the use of NPWT and ORC/collagen/silver dressings to manage complex wound beds as an alternative management option for patients not suitable for reconstructive flap surgery. This technique was performed in a series of 37 patients with complex lower-extremity wounds that were not healing with conventional NPWT alone. All patients had open wounds with exposed critical structures that were difficult to manage, such as exposed tendon, bone, deep crevices, and joint. Successful coverage of exposed critical structures was achieved in 89% of patients, and coverage was achieved within 28 days of combination therapy in 82% of these patients, without any complications. The novel technique of combining ORC/collagen/silver dressing and NPWT provides a useful option in the armamentarium of a reconstructive surgeon dealing with difficult complex lower-extremity wounds.

Direct Polymerization of the Arsenic Drug PENAO to Obtain Nanoparticles with High Thiol-Reactivity and Anti-Cancer Efficiency.

PENAO (4-(N-(S-penicillaminylacetyl)amino) phenylarsonous acid), which is a mitochondria inhibitor that reacts with adenine nucleotide translocator (ANT), is currently being trialed in patients with solid tumors. To increase the stability of the drug, the formation of nanoparticles has been proposed. Herein, the direct synthesis of polymeric micelles based on the anticancer drug PENAO is presented. PENAO is readily available for amidation reaction to form PENAO MA (4-(N-(S-penicillaminylacetyl) amino) phenylarsonous acid methacrylamide) which undergoes RAFT (reversible addition-fragmentation chain transfer) polymerization with poly(ethylene glycol methyl ether methacrylate) as comonomer and poly(methyl methacrylate) (pMMA) as chain transfer agent, resulting in p(MMA)-b-p(PEG-co-PENAO) block copolymers with 3-15 wt % of PENAO MA. The different block copolymers self-assembled into micelle structures, varying in size and stability (Dh = 84-234 nm, cmc = 0.5-82 µg mol-1) depending on the hydrophilic to hydrophobic ratio of the polymer blocks and the amount of drug in the corona of the particle. The more stable micelle structures were investigated toward 143B human osteosarcoma cells, showing an enhanced cytotoxicity and cellular uptake compared to the free drug PENAO (IC50 (PENAO) = 2.7 ± 0.3 µM; IC50 (micelle M4) = 0.8 ± 0.02 µM). Furthermore, PENAOs arsonous acid residue remains active when incorporated into a polymer matrix and conjugates to small mono and closely spaced dithiols and is able to actively target the mitochondria, which is PENAO's main target to introduce growth inhibition in cancer cells. As a result, no cleavable linker between drug and polymer was necessary for the delivery of PENAO to osteosarcoma cells. These findings provide a rationale for in vivo studies of micelle M4 versus PENAO in an osteosarcoma animal model.

Creating Biomorphic Barbed and Branched Mesostructures in Solution through Block Copolymer Crystallization.

Branched and barbed structures are common in nature but rare in nanoscale or mesoscale objects formed by bottom-up self-assembly. Key characteristics of the morphology of natural objects, such as various types of insects and conifer branches, is that despite their similarities no two individual objects are exactly the same. Here we report the self-assembly conditions for a series of poly(ferrocenyldimethylsilane)-block-polyisoprene (PFS-b-PI) diblock copolymers that generate structures with biomorphic shapes. All of these polymers yield long uniform fiber-like micelles with a crystalline PFS core in decane. Injection of a concentrated THF solution of these polymers into THF/decane mixtures, however, leads to barbed and branched mesostructures, with shapes that depend upon the final THF content of the mixed solvent. Interestingly, evaporation of the THF from suspensions of the colloidal biomorphic structures led to elongated fiber-like structures.

Pharmacokinetics of PEGylated recombinant human endostatin (M2ES) in rats.

AIM: M2ES is PEGylated recombinant human endostatin. In this study we investigated the pharmacokinetics, tissue distribution, and excretion of M2ES in rats. METHODS: (125)I-radiolabeled M2ES was administered to rats by intravenous bolus injection at 3 mg/kg. The pharmacokinetics, tissue distribution and excretion of M2ES were investigated using the trichloroacetic acid (TCA) precipitation method. RESULTS: The serum M2ES concentration-time curve after a single intravenous dose of 3 mg/kg in rats was fitted with a non-compartment model. The pharmacokinetic parameters were evaluated as follows: Cmax=28.3 µg·equ/mL, t1/2=71.5 h, AUC(0-∞)=174.6 µg·equ·h/mL, Cl=17.2 mL·h(-1)·kg(-1), MRT=57.6 h, and Vss=989.8 mL/kg for the total radioactivity; Cmax=30.3 µg·equ/mL, t1/2=60.1 h, AUC(0-∞)=146.2 µg·equ·h/mL, Cl=20.6 mL·h(-1)·kg(-1), MRT=47.4 h, and Vss=974.6 mL/kg for the TCA precipitate radioactivity. M2ES was rapidly and widely distributed in various tissues and showed substantial deposition in kidney, adrenal gland, lung, spleen, bladder and liver. The radioactivity recovered in the urine and feces by 432 h post-dose was 71.3% and 8.3%, respectively. Only 0.98% of radioactivity was excreted in the bile by 24 h post-dose. CONCLUSION: PEG modification substantially prolongs the circulation time of recombinant human endostatin and effectively improves its pharmacokinetic behavior. M2ES is extensively distributed in most tissues of rats, including kidney, adrenal gland, lung, spleen, bladder and liver. Urinary excretion was the major elimination route for M2ES.

Reduction-responsive cholesterol-based block copolymer vesicles for drug delivery.

We developed a new robust reduction-responsive polymersome based on the amphiphilic block copolymer PEG-SS-PAChol. The stability and robustness were achieved by the smectic physical cross-linking of cholesterol-containing liquid crystal polymer PAChol in the hydrophobic layer. The reduction-sensitivity was introduced by the disulfide bridge (-S-S-) that links the hydrophilic PEG block and the hydrophobic PAChol block. We used a versatile synthetic strategy based on atom transfer radical polymerization (ATRP) to synthesize the reduction-responsive amphiphilic block copolymers. The reductive cleavage of the disulfide bridge in the block copolymers was first evidenced in organic solution. The partial destruction of PEG-SS-PAChol polymersomes in the presence of a reducing agent was then demonstrated by cryo-electron microscopy. Finally, the calcein release from PEG-SS-PAChol polymersomes triggered by glutathione (GSH) was observed both in PBS suspension and in vitro inside the macrophage cells. High GSH concentrations (≥35 mM in PBS or artificially enhanced in macrophage cells by GSH-OEt pretreatment) and long incubation time (in the order of hours) were, however, necessary to get significant calcein release. These polymersomes could be used as drug carriers with very long circulation profiles and slow release kinetics.

Corrosion resistance, surface evaluation, and geometric design comparison of five self-expanding nitinol stents used in clinical practice.

PURPOSE: To investigate the corrosion resistance properties of 5 commercially available nitinol stents used to treat peripheral artery disease and compare their surface quality, elemental composition, and geometrical design. METHODS: Samples of 5 different designs of nitinol peripheral stents [LifeStent (n=4), Philon (n=6), Epic (n=6), S.M.A.R.T. Control (n=7), and Complete SE (n=7)] were examined using stereomicroscopy, environmental scanning electron microscopy, and x-ray photoelectron spectroscopy. Corrosion resistance testing was performed in accordance with ASTM International Standard F2129-08. RESULTS: Thirteen (43%) of 30 stents corroded during this experiment. Stent fracture was observed in 12 (92%) of these corroded stents. Mean breakdown potentials ranged from 517 to 835 mV (vs. Ag/AgCl) for the Philon, Complete SE, S.M.A.R.T. Control, Epic, and LifeStent models from lowest to highest. A statistically significant difference in breakdown potential was observed between the LifeStent vs. Philon stents (835 vs. 517 mV, p=0.01) and Epic vs. Philon stents (833 vs. 517 mV, p=0.03). Stents with lower breakdown potential and relative breakdown potentials were associated with a higher fracture frequency (Spearman correlation coefficient -0.44, p=0.015 and -0.869, p<0.01, respectively). CONCLUSION: In this in vitro study, corrosion led independently to stent fracture. There is a significant association between lower mean breakdown/relative breakdown potentials and stent fracture.

[Morphological characteristics and gene expression of Chrysomya megacephala eggs in different developmental stages].

OBJECTIVE: To research the morphological characteristics and differential gene expression of Chrysomya megacephala eggs in different developmental stages. METHODS: After C. megacephala laid eggs (0 h), the eggs were collected every 2 h until eggs hatched into larvae. The morphological characteristics of C. megacephala eggs in different developmental stages were observed by stereo microscopy and scanning electron microscopy. The total RNA of the fly eggs was extracted. The expression levels of bicoid, slalom and chitin synthase genes was determined by real-time flourescence quantitative PCR. Statistic analyses were performed with SPSS 19.0. RESULTS: Under the stereomicroscope, at 0-4 h after egg laying, the morphological change of C. megacephala eggs was not obvious. At the 6th hour after egg laying, somites were formed. After 8 hours the eggs shriveled. At the 9th hour after egg laying, the eggs hatched into larvae. The scanning electron microscope images showed that the morphological change of eggs was not obvious in the first 4 hours, the end of micropyle slightly outward, the surface around the micropyle was smooth. At the 6th hour after egg laying, the end of micropyle began to sag and irregular protrusions formed around the micropyle. At the 8th hour the end of micropyle was obviously dented. After 9 hours larvae hatched from eggs. Real-time fluorescence quantitative PCR indicated that the expression levels of bicoid, slalom and chitin synthase genes from C. megacephala eggs regularly changed with the developmental stages. There was a significant difference in threshold cycle values among the three genes (P<0.05). CONCLUSION: The morphological characteristics of C. megacephala eggs change with the development stage. The levels of gene expression in different development period of C. megacephala eggs are different.

Anti-Microbial Effect of AgBr-NP@CTMAB on Streptococcus Mutans and Assessment of Surface Roughness Hardness and Flexural Strength of PMMA.

Purpose: To investigate the inhibition of Streptococcus mutans (S.mutans) and its biofilm by AgBr-nanoparticles (NP) @CTMAB (cetyltrimethyl-ammonium bromide) and evaluate the changes in Polymethyl methacrylate (PMMA)'s surface roughness (Ra), microhardness, and flexural strength during prolonged immersion in AgBr-NP@CTMAB for application in the denture cleaning industry. Patients and Methods: The antibacterial activity of AgBr-NP@CTMAB against S.mutans was measured colony formation assay, OD600 and laser confocal microscopy. Changes in the specimens' values for surface roughness, microhardness, and flexural strength (MPa) were measured after immersion solutions for 180 or 360 days. Results: The AgBr-NP@CTMAB solution exhibited a robust antibacterial effect on planktonic S. mutans, with a minimum bactericidal concentration of 5 µg/mL. The 10 µg/mL AgBr-NP@CTMAB solution efficiently inhibited S. mutans biofilm formation. (2) No significant difference in surface roughness after immersion in AgBr-NP@CTMAB (10 µg/mL and 20 µg/mL) comparing with distilled water (P > 0.05) and Polident had significantly higher than distilled water (P < 0.05). There was a significant decrease in the surface hardness of the PMMA specimens that were immersed in the Polident compared with those in distilled water (P < 0.05). While, no significant differences in surface hardness after immersion in the AgBr-NP@CTMAB (P > 0.05). The result of flexural strength suggested that there was no statistically significant difference (P < 0.05) between AgBr-NP@CTMAB as well as Polident and water. Conclusion: AgBrNP@CTMAB can efficiently inhibit the growth of plankton S.mutans and biofilm formation, without affecting the flexural strength, microhardness, or surface roughness of PMMA. Therefore, AgBrNP@CTMAB holds promise as a new denture cleaning agent.

Injectable ChitHCl-DDA tissue adhesive with high adhesive strength and biocompatibility for torn meniscus repair and regeneration.

Suture pull-through is a clinical problem in meniscus repair surgery due to the sharp leading edge of sutures. Several tissue adhesives have been developed as an alternative to traditional suturing; however, there is still no suitable tissue adhesive specific for meniscus repair treatment due to unsatisfactory biosafety, biodegradable, sterilizable, and tissue-bonding characteristics. In this study, we used a tissue adhesive composed of chitosan hydrochloride reacted with oxidative periodate-oxidized dextran (ChitHCl-DDA) combined with a chitosan-based hydrogel and oxidative dextran to attach to the meniscus. We conducted viscoelastic tests, viscosity tests, lap shear stress tests, Fourier transform infrared (FTIR) spectroscopy, swelling ratio tests, and degradation behavior tests to characterize these materials. An MTT assay, alcian blue staining, migration assay, cell behavior observations, and protein expression tests were used to understand cell viability and responses. Moreover, ex vivo and in vivo tests were used to analyze tissue regeneration and biocompatibility of the ChitHCl-DDA tissue adhesive. Our results revealed that the ChitHCl-DDA tissue adhesive provided excellent tissue adhesive strength, cell viability, and cell responses. This tissue adhesive has great potential for torn meniscus tissue repair and regeneration.

Comparison of methods for activating sesame stalk lignin biochar for removing benzo[a]pyrene from sesame oil.

In this study, three activators and two activation methods were employed to activate sesame lignin-based biochar. The biochar samples were comprehensively characterized, their abilities to adsorb benzo[a]pyrene (BaP) from sesame oil were assessed, and the mechanism was analyzed. The results showed that the biochar obtained by one-step activation was more effective in removing BaP from sesame oil than the biochar produced by two-step activation. Among them, the biochar generated by one-step activation with ZnCl2 as the activator had the largest specific surface area (1068.8776 m3/g), and the richest mesoporous structure (0.7891 m3/g); it removed 90.53 % of BaP from sesame oil. BaP was mainly adsorbed by the mesopores of biochar. Mechanistically, pore-filling, π-π conjugations, hydrogen bonding, and n-π interactions were involved. The adsorption was spontaneous and heat-absorbing. In conclusion, the preparation of sesame lignin biochar using one-step activation with ZnCl2 as the activator was found to be the best for removing BaP from sesame oil. This biochar may be an economical adsorbent for the industrial removal of BaP from sesame oil.

Concentration properties of biopolymers via dead-end forward osmosis.

Extracellular polymeric substances (EPSs) in excess sludge of wastewater treatment plants are valuable biopolymers that can act as recovery materials. However, effectively concentrating EPSs consumes a significant amount of energy. This study employed novel energy-saving pressure-free dead-end forward osmosis (DEFO) technology to concentrate various biopolymers, including EPSs and model biopolymers [sodium alginate (SA), bovine serum albumin (BSA), and a mixture of both (denoted as BSA-SA)]. The feasibility of the DEFO technology was proven and the largest concentration ratios for these biopolymers were 94.8 % for EPSs, 97.1 % for SA, 97.8 % for BSA, and 98.4 % for BSA-SA solutions. An evaluation model was proposed, incorporating the FO membrane's water permeability coefficient and the concentrated substances' osmotic resistance, to describe biopolymers' concentration properties. Irrespective of biopolymer type, the water permeability coefficient decreased with increasing osmotic pressure, remained constant with increasing feed solution (FS) concentration, increased with increasing crossing velocity in the draw side, and showed little dependence on draw salt type. In the EPS DEFO concentration process, osmotic resistance was minimally impacted by osmotic pressure, FS concentration, and crossing velocity, and monovalent metal salts were proposed as draw solutes. The interaction between reverse diffusion metal cations and EPSs affected the structure of the concentrated substances on the FO membrane, thus changing the osmotic resistance in the DEFO process. These findings offer insights into the efficient concentration of biopolymers using DEFO.

Synthesis of cell penetrating peptide sterol coupler and its liposome study on S-mRNA.

In order to overcome the current LNP-mRNA delivery system's weakness of poor stability and rapid degradation by nuclease, a novel chol-CGYKK molecule and then the new phospholipid liposome were designed and prepared. A solid phase approach synthesized CGYKK and connected it to cholesterol via a disulfide linker to form the desired chol-CGYKK. Four formulated samples with different proportions of excipients were prepared by freeze-drying cationic liposomes and packaged S-mRNA. The stability test shows that after six months at 4 °C, the encapsulation rate of this novel phospholipid liposome was still approximately 90%, which would significantly improve the storage and transportation requirement. Transmission electron microscopy, atomic force microscopy, and scanning electron microscopy indicated that the liposomes were spherical and uniformly dispersed. On comparing the levels of mRNA protein expression of the four formulated samples, the S protein vaccine expression of formulated sample 1 was the highest. Uptake by vector cells for formulated sample 1 showed that compared to Lipo2000, and the transfection efficiency was 66.7%. Furthermore, the safety evaluation of the CGYKK and mRNA vaccine liposomes revealed no toxic effects. The in vivo study demonstrated that this novel mRNA vaccine had an immune response. However, it was still not as good as the LNP group right now, but its excellent physicochemical properties, stability, in vitro biological activity, and in vivo efficacy against SARS-CoV-2 provided new strategies for developing the next generation of mRNA delivery system.

Preparation, Characterization and ex vivo Skin Permeability Evaluation of Type I Collagen-Loaded Liposomes.

Purpose: In the present study, we prepared collagen liposomes with the addition of polyol, which is expected to not only increase the solubility of collagen but also improve skin penetration. Methods: Collagen liposomes were prepared by the film dispersion method, and their characteristics, integrity and biosafety were evaluated by Fourier transform infrared spectroscopy (FTIR), UV-VIS spectroscopy, polyacrylamide gel electrophoresis (SDS-PAGE), dynamic light scattering (DLS) and transmission electron microscope (TEM). The transdermal absorption of collagen and collagen liposomes were tested by an ex vivo horizontal Valia-Chien diffusion cell system. Results: We first demonstrated that collagen extracted from bovine Achilles tendon was type I collagen. The results of DLS measurement and TEM observation showed that the collagen liposomes were spherical in shape with average diameter (75.34±0.93 nm) and maintained high stability at low temperature (4°C) for at least 42 days without toxicity. The encapsulation rate of collagen liposomes was 57.80 ± 0.51%, and SDS-PAGE analysis showed that collagen was intact in liposomes. Finally, permeability studies indicated that the collagen-loaded liposomes more easily penetrated the skin compared to collagen itself. Conclusion: This study proposed a new method to improve the bioavailability and permeability of bovine type I collagen, which improves the applicability of collagen in biomedicine, cosmeceuticals and pharmaceutical industries.

Plasma-Enabled Graphene Quantum Dot Hydrogel-Magnesium Composites as Bioactive Scaffolds for In Vivo Bone Defect Repair.

Bioactive and mechanically stable metal-based scaffolds are commonly used for bone defect repair. However, conventional metal-based scaffolds induce nonuniform cell growth, limiting damaged tissue restoration. Here, we develop a plasma nanotechnology-enhanced graphene quantum dot (GQD) hydrogel-magnesium (Mg) composite scaffold for functional bone defect repair by integrating a bioresource-derived nitrogen-doped GQD (NGQD) hydrogel into the Mg ZK60 alloy. Each scaffold component brings major synergistic advantages over the current alloy-based state of the art, including (1) mechanical support of the cortical bone and calcium deposition by the released Mg2+ during degradation; (2) enhanced uptake, migration, and distribution of osteoblasts by the porous hydrogel; and (3) improved osteoblast adhesion and proliferation, osteogenesis, and mineralization by the NGQDs in the hydrogel. Through an in vivo study, the hybrid scaffold with the much enhanced osteogenic ability induced by the above synergy promotes a more rapid, uniform, and directional bone growth across the hydrogel channel, compared with the control Mg-based scaffold. This work provides insights into the design of multifunctional hybrid scaffolds, which can be applied in other areas well beyond the demonstrated bone defect repair.