Association between serum uric acid, hyperuricemia and periodontitis: a cross-sectional study using NHANES data.

OBJECTIVES: Diabetes and other metabolic diseases have been linked to the development of periodontitis, but little research has been done to determine whether serum uric acid (SUA) levels and hyperuricemia play a role. This study aimed to investigate the relationship between SUA, hyperuricemia, and periodontitis. METHODS: Using data from the National Health and Nutrition Examination Survey (NHANES) 2011-2014, we created a nationally representative data set. We used multivariable logistic regression models to assess the relationship between SUA, hyperuricemia, and periodontitis and presented odds ratios (OR) in women and men, respectively. RESULTS: In women, adjusted multivariable regression models showed that SUA (4.1-4.3mg/dl) was associated with higher odds of periodontitis (OR = 1.43; 95% confidence interval (CI):1.0 ~ 2.03, p = 0.047) with SUA (≤ 3.3mg/dl) as reference. The risk of periodontitis tended to increase slightly but insignificantly with increasing SUA levels, and the adverse effects occurred only when SUA increased to a certain level, and then reached a plateau. In men, the adjusted OR values for SUA (4.9-5.2mg/dl), SUA (5.3-5.5mg/dl), SUA (5.9-6.2mg/dl), and SUA (6.3-6.5mg/dl) were 0.66 (95% CI: 0.45 ~ 0.96, p = 0.029), 0.58 (95% CI: 0.40 ~ 0.85, p = 0.006), 0.67(95% CI: 0.47 ~ 0.97, p = 0.035), and 0.67 (95% CI: 0.45 ~ 0.99, p = 0.043), respectively, with SUA (≤ 4.3mg/dl) as reference. The elevated SUA levels are protective against periodontitis, but there is a range within which the risk of periodontitis decreases, followed by a non-significant tendency to increase. CONCLUSIONS: The levels of SUA that are linked to the risk of periodontitis. Future prospective longitudinal studies and strategies are required to further confirm whether controlled SUA treatment is an effective adjunct to systematic periodontal therapy and whether SUA can be used as a diagnostic biomarker to assess the risk or progression of periodontitis.

Customized Vascular Repair Microenvironment: Poly(lactic acid)-Gelatin Nanofibrous Scaffold Decorated with bFGF and Ag@Fe3O4 Core-Shell Nanowires.

Vascular defects caused by trauma or vascular diseases can significantly impact normal blood circulation, resulting in serious health complications. Vascular grafts have evolved as a popular approach for vascular reconstruction with promising outcomes. However, four of the greatest challenges for successful application of small-diameter vascular grafts are (1) postoperative anti-infection, (2) preventing thrombosis formation, (3) utilizing the inflammatory response to the graft to induce tissue regeneration and repair, and (4) noninvasive monitoring of the scaffold and integration. The present study demonstrated a basic fibroblast growth factor (bFGF) and oleic acid dispersed Ag@Fe3O4 core-shell nanowires (OA-Ag@Fe3O4 CSNWs) codecorated poly(lactic acid) (PLA)/gelatin (Gel) multifunctional electrospun vascular grafts (bAPG). The Ag@Fe3O4 CSNWs have sustained Ag+ release and exceptional photothermal capabilities to effectively suppress bacterial infections both in vitro and in vivo, noninvasive magnetic resonance imaging (MRI) modality to monitor the position of the graft, and antiplatelet adhesion properties to promise long-term patency. The gradually released bFGF from the bAPG scaffold promotes the M2 macrophage polarization and enhances the recruitment of macrophages, endothelial cells (ECs) and fibroblast cells. This significant regulation of diverse cell behavior has been proven to be beneficial to vascular repair and regeneration both in vitro and in vivo. Therefore, this study supplies a method to prepare multifunctional vascular-repair materials and is expected to represent a significant guidance and reference to the development of biomaterials for vascular tissue engineering.

Supramolecular interactions between functional saccharide-based ionic liquids and cellulose macromolecules.

Interactions between polysaccharides and ionic liquids (ILs) at the molecular level are essential to elucidate the dissolution and/or plasticization mechanism of polysaccharides. Herein, saccharide-based ILs (SILs) were synthesized, and cellulose membrane was soaked in different SILs to evaluate the interactions between SILs and cellulose macromolecules. The relevant results showed that the addition of SILs into cellulose can effectively reduce the intra- and/or inter-molecular hydrogen bonds of polysaccharides. Glucose-based IL showed the intensest supramolecular interactions with cellulose macromolecules compared to sucrose- and raffinose-based ILs. Two-dimensional correlation and perturbation-correlation moving window Fourier transform infrared techniques were for the first time used to reveal the dynamic variation of the supramolecular interactions between SILs and cellulose macromolecules. Except for the typical HO⋯H interactions of cellulose itself, stronger -Cl⋯HO hydrogen bonding interactions were detected in the specimen of SILs-modified cellulose membranes. Supramolecular interactions of -Cl⋯H, HO⋯H, C-Cl⋯H, and -C=O⋯H between SILs and cellulose macromolecules sequentially responded to the stimuli of temperature. This work provides a new perspective to understanding the interaction mechanism between polysaccharides and ILs, and an avenue to develop the next-generation ILs for dissolving or thermoplasticizing polysaccharide materials.

Micro-and-nanometer topological gradient of block copolymer fibrous scaffolds towards region-specific cell regulation.

Regulating cell behavior and function by surface topography has drawn significant attention in tissue engineering. Herein, a gradient fibrous scaffold comprising anisotropic aligned fibers and isotropic annealed fibers was developed to provide a controllable direction of cell migration, adhesion, and spreading. The electrospun aligned fibers were engraved to create surface gradients with micro-and-nanometer roughness through block copolymer (BCP) self-assembly induced by selective solvent vapor annealing (SVA). The distinct manipulation of cell behavior by annealed fibrous scaffolds with tailored self-assembled nanostructure and welded fibrous microstructure has been illustrated by in situ/ex situ small angle X-ray scattering (SAXS), scanning electron microscopy (SEM), atomic force microscopy (AFM) and in vitro cell culture. Further insights into the effect of integrated gradient fibrous scaffold were gained at the level of protein expression. From the perspective of gradient topology, this region-specific scaffold based on BCP fibers shows the prospect of guiding cell migration, adhesion and spreading and provides a generic method for designing biomaterials for tissue-engineering.

Evaluation of the impact of reference tooth morphology and alignment on model measurement accuracy.

Background: The development of personalized and high-precision dental treatment is inseparable from the accurate measurement and analysis of the model. Compared with traditional plaster models, digital models allow dentists to obtain richer and more detailed inspection results. However, the measurement of digital models in clinical practice usually ignores the influence of the overall three-dimensional (3D) structure of teeth and tooth arrangement on the measurement results. The purpose of this study was to evaluate the effect of calibrated tooth axis and tooth arrangement on tooth width and arch length. Methods: A total of 110 digital models from 80 participants were used to measure teeth width and dental arch length using the following methods: Method A, simple positioning of the proximal and distal of teeth; Method B: calibration of the clinical crown axis; and Method C: calibration of the overall 3D axis of the teeth. The Measurand model included pre- and post-orthodontic models of the same patients to assess the impact of tooth alignment on outcomes. Results: In the aligned dentition, whether the tooth axis was calibrated had no effect on the measurement results. On unaligned dentitions, calibrating the pinion allowed for more accurate measurements, with Method C the closest to the true size. Furthermore, the arrangement of teeth affected the measurement, but there was no continuous linear correlation with arch length discrepancy (ALD). Conclusions: Clinicians should choose appropriate measurement methods according to actual needs when performing model measurement, and should pay attention to the influence of tooth axis, tooth shape, and arrangement on the measurement results.

Can Photothermal Post-Operative Cancer Treatment Be Induced by a Thermal Trigger?

One of the current challenges in the post-operative treatment of breast cancer is to develop a local therapeutic vector for preventing recurrence and metastasis. Herein, we develop a core-shell fibrous scaffold comprising phase-change materials and photothermal/chemotherapy agents, as a thermal trigger for programmable-response drug release and synergistic treatment. The scaffold is obtained by in situ growth of a zeolitic imidazolate framework-8 (ZIF-8) shell on the surface of poly(butylene succinate)/lauric acid (PBS/LA) phase-change fibers (PCFs) to create PCF@ZIF-8. After optimizing the core-shell and phase transition behavior, gold nanorods (GNRs) and doxorubicin hydrochloride (DOX) co-loaded PCF@ZIF-8 scaffolds were shown to significantly enhance in vitro and in vivo anticancer efficacy. In a healthy tissue microenvironment at pH 7.4, the ZIF-8 shell ensures the sustained release of DOX. If the tumor recurs, the acidic microenvironment induces the decomposition of the ZIF-8 shell. Under the second near-infrared (NIR-II) laser treatment, GNR-induced thermal not only directly destroys the relapsed tumor cells but also accelerates DOX release by inducing the phase transition of LA. Our study sheds light on a well-designed programmable-response trigger, which provides a promising strategy for post-operative recurrence prevention of cancer.