Clinicopathological characteristics and diagnostic accuracy of BRAF mutations in ameloblastoma: A Bayesian network analysis.

OBJECTIVE: This Bayesian network meta-analysis was performed to analyze the associations between clinicopathological characteristics and BRAF mutations in ameloblastoma (AM) patients and to evaluate the diagnostic accuracy. MATERIALS AND METHODS: Four electronic databases were searched from 2010 to 2024. The search terms used were specific to BRAF and AM. Observational studies or randomized controlled trials were considered eligible. The incidence of BRAF mutation and corresponding clinicopathological features in AM patients were subjected to Bayesian network analyses and diagnostic accuracy evaluation. RESULTS: A total of 937 AM patients from 20 studies were included. The pooled prevalence of BRAF mutations in AM patients was 72%. According to the Bayesian network analysis, BRAF mutations are more likely to occur in younger (odds ratio [OR], 2.3; credible interval [CrI]: 1.2-4.5), mandible site (OR, 3.6; 95% CrI: 2.7-5.2), and unicystic (OR, 1.6; 95% CrI: 1.1-2.4) AM patients. Similarly, higher diagnostic accuracy was found in the younger, mandible, and unicystic AM groups. CONCLUSIONS: The incidence, risk, and diagnostic accuracy of BRAF mutation in AM were greater in younger patients, those with mandible involvement, and those with unicystic AM than in patients with other clinicopathological features. In addition, there was a strong concordance in the diagnostic accuracy between molecular tests and immunohistochemical analysis.

Application of High-Frequency Ultrasound to Evaluate Forehead Filling Materials.

BACKGROUND: In recent years, soft tissue materials have been applied as forehead fillers. Some filling materials need to be removed or refilled in a timely manner in certain situations; therefore, it is important to develop a method to identify the location and type of filling materials. This study summarizes the imaging findings of different filling materials under high-frequency ultrasound, providing a reference for clinical treatment. METHODS: We screened facial ultrasound images performed at the Plastic Surgery Hospital of the Chinese Academy of Medical Sciences from April 2015 to July 2023 and classified and summarized the types of frontal filling materials and their imaging results. RESULTS: This study included ultrasound imaging results from 114 patients, including 39 with hyaluronic acid (HA) filling, 45 with polyacrylamide hydrogel (PAG) filling, 14 who received autologous fat transplantation, 2 who received prosthesis implantation, 2 who received both HA and PAG filling, and 12 who received silicone oil filling. HA mainly manifests as an anechoic zone on ultrasonography, with images divisible into four types. PAG primarily presents as fine punctate echoes, divisible into five types. Fat transplantation presents as a low-echo area with uneven density, divisible into five types. Finally, the silicone oil-filling material appears as a cloud-like high echo on the forehead, visible throughout the entire skin layer, and unclear imaging in deep tissues. CONCLUSION: High-frequency ultrasound is a safe and reliable method to evaluate the type and position of forehead filling materials, which can be easily applied in clinical practice. LEVEL OF EVIDENCE IV: This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

Localization of the Submandibular Glands Using High-Frequency Ultrasound.

BACKGROUND: Injecting botulinum toxin (BTX) into the submandibular glands (SMGs) can treat drooling symptoms in neurological diseases and improve the aesthetics of SMG hypertrophy and ptotic SMGs. OBJECTIVES: This study aimed to define the size and position of the SMGs by high-frequency ultrasound, and to perform statistical analysis to improve the safety and accuracy of BTX injection therapy. METHODS: Neck ultrasonography with high-frequency ultrasound was performed on 214 volunteers. The length, height, and thickness of the SMGs, and the distance between the SMGs and the midline, the anterior border of the sternocleidomastoid, the mandible, and the surface were measured. RESULTS: The SMGs were almond-shaped with a mean [standard deviation] length of 33.7 [4.7] mm, a thickness of 13.3 [2.9] mm, and a height of 27.6 [6.0] mm. The length and height were significantly different between underage and youth groups. The size of the SMGs did not show any notable differences with increasing BMI; however, their depth, and the distance from the mandible, midline, and anterior border of the sternocleidomastoid increased. No significant differences were observed between the affected and healthy sides in patients with microtia, hemifacial microsomia, or cleft lip and palate. CONCLUSIONS: Ultrasound provides more comprehensive information regarding the size and position of the SMGs, which can serve as a reference in BTX therapy and in the diagnosis of SMG diseases involving size alterations.

Abatement of Aromatic Contaminants from Wastewater by a Heat/Persulfate Process Based on a Polymerization Mechanism.

A novel approach to the abatement of pollutants consisting of their conversion to separable solid polymers is explored by a heat/persulfate (PDS) process for the treatment of high-temperature wastewaters. During this process, a simultaneous decontamination and carbon recovery can be achieved with minimal use of PDS, which is significantly different from conventional degradation processes. The feasibility of this process is demonstrated by eight kinds of typical organic pollutants and by a real coking wastewater. For the treatment of the selected pollutants, 30.2-91.9% DOC abatement was achieved with 24.8-91.2% carbon recovery; meanwhile, only 5.2-47.0% of PDS was consumed compared to a conventional degradation process. For the treatment of a real coking wastewater, 71.0% DOC abatement was achieved with 66.0% carbon recovery. With phenol as a representative compound, our polymerization-based heat/PDS process is applicable in a wide pH range (3.5-9.0) with a carbon recovery of >87%. Both SO4•- and HO• can be initiators for polymerization, with different contribution ratios under various conditions. Phenol monomers are semioxidized to form phenolic radicals, which are polymerized via chain transfer or chain growth processes to form separable solid phenol polymers, benzenediol polymers, and cross-linked polymers.

Peri-implant marginal bone changes with implant-supported metal-ceramic or monolithic zirconia single crowns: A retrospective clinical study of 1 to 5 years.

STATEMENT OF PROBLEM: Monolithic zirconia has excellent mechanical and biologic properties. However, evidence of the clinical properties of implant-supported monolithic zirconia prostheses is limited. PURPOSE: The purpose of this retrospective clinical study was to compare the peri-implant marginal bone changes of metal-ceramic and monolithic zirconia single crowns in the posterior region after prosthetic loading. MATERIAL AND METHODS: A total of 224 participants treated with 327 implants restored with either metal-ceramic or monolithic zirconia single crowns in the posterior region between 2012 and 2016 were included in this study. Clinical outcomes, including the plaque index, peri-implant probing depth, and bleeding on probing, were recorded, and the marginal bone level was recorded by using the panoramic radiographs obtained at implant placement, second-stage surgery, and the most recent follow-up visit. The included parameters were analyzed with the nonparametric Mann-Whitney tests (α=.05). RESULTS: The mean follow-up time was 30.4 months, and the cumulative survival rate of implants was 100% and that of the prostheses was 99.1%. The plaque index was 0.46 in the metal-ceramic group, which was significantly higher (P<.05) than 0.37 in the monolithic zirconia group. However, no significant differences (P>.05) were observed in peri-implant probing depth and bleeding on probing between the 2 groups. The marginal bone level at implant placement, second-stage surgery, and the most recent follow-up visit was above the implant platform in both the metal-ceramic and monolithic zirconia groups. The marginal bone changes of the metal-ceramic group was 0.31 mm in the healing period and 0.38 mm in the prosthetic loading period, while in the monolithic zirconia group, it was 0.25 mm in the healing period and 0.43 mm in the prosthetic loading period; no significant differences (P>.05) were observed between the 2 groups. CONCLUSIONS: The peri-implant marginal bone level change was comparable after prosthetic loading for metal-ceramic and monolithic zirconia single crowns, although monolithic zirconia was associated with reduced plaque.

Lipid Nanoparticle Technology for Delivering Biologically Active Fatty Acids and Monoglycerides.

There is enormous interest in utilizing biologically active fatty acids and monoglycerides to treat phospholipid membrane-related medical diseases, especially with the global health importance of membrane-enveloped viruses and bacteria. However, it is difficult to practically deliver lipophilic fatty acids and monoglycerides for therapeutic applications, which has led to the emergence of lipid nanoparticle platforms that support molecular encapsulation and functional presentation. Herein, we introduce various classes of lipid nanoparticle technology and critically examine the latest progress in utilizing lipid nanoparticles to deliver fatty acids and monoglycerides in order to treat medical diseases related to infectious pathogens, cancer, and inflammation. Particular emphasis is placed on understanding how nanoparticle structure is related to biological function in terms of mechanism, potency, selectivity, and targeting. We also discuss translational opportunities and regulatory needs for utilizing lipid nanoparticles to deliver fatty acids and monoglycerides, including unmet clinical opportunities.

[Advances in genetic studies of Charcot-Marie-Tooth disease type 4 (CMT4)].

The Charcot-Marie-Tooth disease (CMT) is one of the most common human inherited peripheral neuropathies. The most common pattern of inheritance is autosomal dominant, with less often occurrence autosomal recessive and X-linked dominant/recessive inheritance. CMT is generally divided into three forms: demyelinating forms (CMT1), axonal forms (CMT2) and intermediate forms (DI-CMT). The autosomal recessive form (AR-CMT1 or CMT4) is accompanied by progressive distal muscle weakness and atrophy of the limbs, pes cavus and claw-like hands. In addition, CMT4 is also characterized by early onset, rapid progression, and varying degrees of sensory loss and spinal deformities (e.g. scoliosis). Recently, 11 subtypes of CMT4 have been identified. Some of these subtypes were clear in pathogenic mechanisms, some had founder mutation, but some still had limited clinical description and mutation analysis. In this review, we summarize the latest research progresses of CMT4, including genotypes and phenotypes, pathogenic mechanisms and mouse models.

Facile directed assembly of hollow polymer nanocapsules within spontaneously formed catanionic surfactant vesicles.

Surfactant vesicles containing monomers in the interior of the bilayer were used to template hollow polymer nanocapsules. This study investigated the formation of surfactant/monomer assemblies by two loading methods, concurrent loading and diffusion loading. The assembly process and the resulting aggregates were investigated with dynamic light scattering, small angle neutron scattering, and small-angle X-ray scattering. Acrylic monomers formed vesicles with a mixture of cationic and anionic surfactants in a broad range of surfactant ratios. Regions with predominant formation of vesicles were broader for compositions containing acrylic monomers compared with blank surfactants. This observation supports the stabilization of the vesicular structure by acrylic monomers. Diffusion loading produced monomer-loaded vesicles unless vesicles were composed from surfactants at the ratios close to the boundary of a vesicular phase region on a phase diagram. Both concurrent-loaded and diffusion-loaded surfactant/monomer vesicles produced hollow polymer nanocapsules upon the polymerization of monomers in the bilayer followed by removal of surfactant scaffolds.

Effects of chronic fluorosis on the expression of VEGF/PI3K/AKT/eNOS in the gingival tissue of rats with orthodontic tooth movement.

It has been reported that the force of orthodontic correction triggers periodontal tissue remodeling by affecting angiogenesis. However, the manifestation of the vascular response to orthodontic tooth movement in the setting of chronic fluorosis is unclear. The aim of the present study was to preliminarily explore the effect of orthodontic treatment on the angiogenesis of gingival tissue in rats with chronic fluorosis by monitoring changes in the expression of vascular endothelial growth factor (VEGF), phosphatidylinositol-3 kinase (PI3K), AKT (or protein kinase B) and endothelial nitric oxide synthase (eNOS) in the gingival tissue. A total of 60 rats were randomly divided equally into the orthodontic group (O group; n=30) and fluorosis orthodontic group (FO group; n=30). Each of these groups was divided into 0-, 3-, 7-, 14- and 21-day groups (n=6/group). Fluorosis and orthodontic tooth movement models were established, and rats in each group were sacrificed for tissue sampling at the corresponding time points. Tissue morphology was observed via hematoxylin and eosin (H&E) staining. The protein and mRNA expression levels of VEGF, PI3K, AKT and eNOS in gingival tissue were detected by western blotting and reverse transcription-quantitative polymerase chain reaction, respectively. The H&E staining images showed that the FO group had smaller blood vessels and reduced vascular proliferation compared with the O group. Furthermore, the mRNA and protein expression levels of VEGF, PI3K, AKT and eNOS were reduced in the gingiva of rats in the FO group compared with the O group, and certain reductions were significant during the delayed tooth movement period. In addition, with the extension of the application of orthodontic stress, the mRNA and protein expression levels of VEGF, PI3K, AKT and eNOS in the gingiva of the O and FO groups showed a trend of increasing at first and subsequently decreasing, which corresponds with the tooth movement cycle. In conclusion, chronic fluorosis may inhibit the angiogenesis and the expression of the VEGF/PI3K/AKT/eNOS pathway in gingival tissue of orthodontic tooth movement.

Gingival Necrosis Related to Sepsis-Induced Agranulocytosis Due to Pseudomonas aeruginosa Bacteraemia: A Case Report.

Background: There have been no reports of sepsis-induced agranulocytosis causing gingival necrosis in otherwise medically healthy patients to the authors' best knowledge. Even though there are several case reports of gingival necrosis secondary to medication-induced agranulocytosis, they have not systematically described the natural progression of agranulocytosis-related gingival necrosis. Methods: This paper presents a case report of a 29-year-old female Indian patient with generalised gingival necrosis and constitutive signs of intermittent fever, nausea, and vomiting. She also complained of abdominal pains. Blood counts showed agranulocytosis, and the patient was admitted for a workup of the underlying cause. Parenteral broad-spectrum antibiotics were administered, which brought about clinical resolution. Results: Her gingival necrosis was attributed to sepsis-induced agranulocytosis triggered by Pseudomonas aeruginosa bacteraemia, and upon clinical recovery, spontaneous exfoliation left behind exposed bone. Secondary healing over the exposed alveolar bone was noted after a year-long follow-up, albeit with some residual gingival recession. Conclusions: Oral manifestations of gingival necrosis, when present with concomitant constitutive symptoms, could indicate a serious underlying systemic condition that could be potentially life-threatening if left untreated. Dentists should be cognizant of this possibility so that timely intervention is not delayed.

Electrical stimulation induced pre-vascularization of engineered dental pulp tissue.

Vascularization is a key step to achieve pulp tissue regeneration and in vitro pre-vascularized dental pulp tissue could be applied as a graft substitute for dental pulp tissue repair. In this study, human dental pulp stem cells (DPSCs) and human umbilical vein endothelial cells (hUVECs) were co-cultured in 3D Matrigel and 150 mV/mm electric fields (EFs) were used to promote the construction of pre-vascularized dental pulp tissue. After optimizing co-cultured ratio of two cell types, immunofluorescence staining, and live/dead detection were used to investigate the effect of EFs on cell survival, differentiation and vessel formation in 3D engineered dental pulp tissue. RNA sequencing was used to investigate the potential molecular mechanisms by which EF regulates vessel formation in 3D engineered dental pulp tissue. Here we identified that EF-induced pre-vascularized engineered dental pulp tissue not only had odontoblasts, but also had a rich vascular network, and smooth muscle-like cells appeared around the blood vessels. The GO enrichment analysis showed that these genes were significantly enriched in regulation of angiogenesis, cell migration and motility. The most significant term of the KEGG pathway analysis were NOTCH signaling pathway and Calcium signaling pathway etc. The PPI network revealed that NOTCH1 and IL-6 were central hub genes. Our study indicated that EFs significantly promoted the maturation and stable of blood vessel in 3D engineered pulp tissue and provided an experimental basis for the application of EF in dental pulp angiogenesis and regeneration.

Glutenin-chitosan 3D porous scaffolds with tunable stiffness and systematized microstructure for cultured meat model.

A glutenin (G)-chitosan (CS) complex (G-CS) was cross-linked by water annealing with aim to prepare structured 3D porous cultured meat scaffolds (CMS) here. The CMS has pore diameters ranging from 18 to 67 µm and compressive moduli from 16.09 to 60.35 kPa, along with the mixing ratio of G/CS. SEM showed the porous organized structure of CMS. FTIR and CD showed the increscent content of α-helix and ß-sheet of G and strengthened hydrogen-bondings among G-CS molecules, which strengthened the stiffness of G-CS. Raman spectra exhibited an increase of G concentration resulted in higher crosslinking of disulfide-bonds in G-CS, which aggrandized the bridging effect of G-CS and maintained its three-dimensional network. Cell viability assay and immuno-fluorescence staining showed that G-CS effectively facilitated the growth and myogenic differentiation of porcine skeletal muscle satellite cells (PSCs). CLSM displayed that cells first occupied the angular space of hexagon and then ring-growth circle of PSCs were orderly formed on G-CS. The texture and color of CMS which loaded proliferated PSCs were fresh-meat like. These results showed that physical cross-linked G-CS scaffolds are the biocompatible and stable adaptable extracellular matrix with appropriate architectural cues and natural micro-environment for structured CM models.

Treatment of a large area perioral viral herpes infection following noninvasive ventilation: A case report.

BACKGROUND: Alphaherpesvirus belongs to the Herpesviridae family and has large, monopartite double-stranded linear DNA. It mainly infects the skin, mucosa, and nerves, and can affect various hosts, including humans and other animals. Here, we present a case of a patient seen by the gastroenterology department at our hospital who experienced an oral and perioral herpes infection following treatment with a ventilator. The patient was treated with oral and topical antiviral drugs, furacilin, oral and topical antibiotics, local epinephrine injection, topical thrombin powder, and nutritional and supportive care. A wet wound healing approach was also implemented with good response. CASE SUMMARY: A 73-year-old woman presented to the hospital with a chief complaint of "abdominal pain for 3 d with dizziness for 2 d." She was admitted to the intensive care unit for septic shock and spontaneous peritonitis secondary to cirrhosis and was given antiinflammatory and symptomatic supportive treatment. A ventilator was used to assist breathing for acute respiratory distress syndrome, which developed during her admission. A large area of herpes infection appeared in the perioral region 2 d following noninvasive ventilation. The patient was transferred to the gastroenterology department, at which time she had a body temperature of 37.8 C and a respiratory rate of 18/min. The patient's consciousness was intact, and she no longer had abdominal pain or distension, chest tightness, or asthma. At this point, the infected perioral region changed in appearance and was now accompanied by local bleeding with crusting of blood at the wounds. The surface area of the wounds measured approximately 10 cm × 10 cm. A cluster blisters appeared on the patient's right neck, and ulcers developed in her mouth. On a subjective numerical pain scale, the patient reported a pain level of 2. Overall, her diagnoses other than the oral and perioral herpes infection included: (1) Septic shock; (2) spontaneous peritonitis; (3) abdominal infection; (4) decompensated cirrhosis; and (5) hypoproteinemia. Dermatology was consulted regarding the treatment of the patient's wounds; they suggested treatment with oral antiviral drugs, an intramuscular injection of nutritious nerve drugs, and the application of topical penciclovir and mupirocin around the lips. Stomatology was also consulted and suggested the use of nitrocilin in a local wet application around the lips. CONCLUSION: Through multidisciplinary consultation, the patient's oral and perioral herpes infection was successfully treated with the following combined approach: (1) Application of topical antviral and antibiotic treatments; (2) keeping the wound moist with a wet wound healing strategy; (3) systemic use of oral antiviral drugs; and (4) symptomatic and nutritional supportive care. The patient was discharged from the hospital after successful wound healing.

Black odorous water concentrating by forward osmosis: rejection performance of characteristic pollutants based on cation exchange.

This study aimed to investigate pollutant concentration and nitrogen interception characteristics of a forward osmosis (FO) process for concentrating black odorous water. The membrane cell was operated in active layer facing feed solution (AL-FS) mode with aquaporin (AQP) as the membrane material and NaCl solution as the draw solution (DS). The organic pollutants (COD), TP, NH+4-N, NO-3-N, TN, Fe and Mn in black odorous water were concentrated non-intermittently for 24 h, and their interception characteristics were investigated. The results showed that the average interception rates of COD, TP, NO- 3-N, TN, Fe and Mn were 97.2%, 98.0%, 58.7%, 54.3%, 61.8% and 60.0%, respectively, while the average interception rate of NH+4-N was only 1.27%-3.47%. To explore the characteristics of nitrogen interception, a comparison was conducted between AQP membrane and thin film composite (TFC) membrane. Because the surface electronegativity of AQP membrane was stronger than that of TFC, the effect of cation exchange on ammonia nitrogen interception was more serious with AQP membrane. With NaCl solution as DS, the reverse osmosis flux of Na+ was (0.53 ± 0.02 mol·m-2·h-1), which was significantly higher than that of Cl- (0.29 ± 0.03 mol·m-2·h-1) (P < 0.05). The interception effect of AQP membrane on TN was related to the proportion of NH+4-N in TN. The pretreatment of black odorous water by aeration could transform part of NH+4-N into NO-3-N, and reduce the negative effect of cation exchange effect on nitrogen interception. The TN interception rate increased from 54.3% to 66.1%.

Fabrication of elliptically constructed liquid crystalline elastomeric scaffolds for 3D artificial tissues.

Inspired by the orientation and the fibrous structure of human muscle tissues, we fabricated preconstructed porous liquid crystalline (LC) scaffolds through a two-step polymerization and salt leaching method. A novel strategy combining the aligning properties of LCs and the ease of processing of elastomers for the preparation of elliptical scaffolds for muscle cell culture was proposed in this research. Different from the other types of scaffolds, our biocompatible LC scaffold that can be implanted into the human body using a supporting unit to improve the mechanical properties compared with those of natural muscle. To evaluate the synthesized scaffolds, in vitro experiments using normal human dermal fibroblast (NHDF) cells and smooth muscle cells from rats were carried out, and the sample cells were cultured on each sample scaffold. Based on the results of long-term culture of NHDF cells on the LC scaffolds, it can be confirmed that all three kinds of LC scaffolds have good biocompatibility and provide enough space for cell growth. The addition of gelatin can significantly enhance the biocompatibility of the synthesized scaffolds. Evaluation of scaffold morphologies on cell growth indicates that the molecular arrangement on the scaffolds can induce the growth direction of smooth muscle cells to a certain extent, thereby increasing the formation of highly ordered arrangement tissues. The population doubling time of NHDF cells on the different scaffolds suggest that gelatin can improve the attachment and growth of cells. Investigation of cell viability on LC scaffolds shows that the original LC scaffolds already possess excellent biocompatibility. Additionally, the average cell viability of smooth muscle cells was above 90%, showing that the LC scaffolds in this research are suitable for application in muscle tissue engineering. Based on the results, the gelatin-coated scaffolds are more conducive to the growth of cells in this research and provide promising candidates for tissue engineering in biomedical fields and research fields.

Head and neck carcinoma in children: A clinicopathological study of 42 cases.

Background/purpose: Cancer is an important part of the global burden of childhood diseases. Head and neck carcinoma in children is rare and related research is limited. This study aimed to investigate the clinicopathological features of childhood head and neck carcinoma. Materials and methods: Forty-two cases of childhood head and neck carcinoma treated in our institution were reviewed and analyzed. Results: Median age overall was 11 years. Twenty-three patients (54.8%) were male and 19 (45.2%) were female. Parotid gland location was most common (54.8%). Mucoepidermoid carcinoma and squamous cell carcinoma were the most common histological types (57.1% and 11.9%, respectively). Two patients had a history of bone marrow transplantation and two had a history of odontogenic keratocyst. The recurrence rate after treatment was 8.6%. Conclusion: Early diagnosis and treatment and close follow-up of childhood head and neck carcinoma are warranted to prevent recurrence and improve clinical outcome.

Gene liposome nanocomplex-loaded dermal substitute promotes diabetic chronic wound healing and angiogenesis in rat.

The incidence of chronic diabetic wounds is increasing with the growing number of diabetic patients, and conventional wound dressings have proven to be ineffective in treating them. To address this challenge, researchers have developed artificial dermal substitutes using collagen and hyaluronic acid, which are crucial extracellular matrices. However, these subsitiues lack precision and targeted treatment. To overcome this limitation, a gene liposome nanocomplex-loaded dermal substitute (GDS) has been developed as a potential solution. This innovative biomaterial combines the benefits of liposome nanocomplexes with dermal substitutes to offer a more accurate and effective treatment option for chronic diabetic wounds. The GDS has the ability to deliver genes and therapeutic agents specifically to the wound site, promoting angiogenesis and accelerating the wound healing process. Overall, the GDS presents a promising new approach for the clinical treatment of chronic diabetic wounds, offering a targeted and effective solution for this growing problem.

Injectable liposomal docosahexaenoic acid alleviates atherosclerosis progression and enhances plaque stability.

Atherosclerosis is a chronic inflammatory vascular disease that is characterized by the accumulation of lipids and immune cells in plaques built up inside artery walls. Docosahexaenoic acid (DHA, 22:6n-3), an omega-3 polyunsaturated fatty acid (PUFA), which exerts anti-inflammatory and antioxidant properties, has long been purported to be of therapeutic benefit to atherosclerosis patients. However, large clinical trials have yielded inconsistent data, likely due to variations in the formulation, dosage, and bioavailability of DHA following oral intake. To fully exploit its potential therapeutic effects, we have developed an injectable liposomal DHA formulation intended for intravenous administration as a plaque-targeted nanomedicine. The liposomal formulation protects DHA against chemical degradation and increases its local concentration within atherosclerotic lesions. Mechanistically, DHA liposomes are readily phagocytosed by activated macrophages, exert potent anti-inflammatory and antioxidant effects, and inhibit foam cell formation. Upon intravenous administration, DHA liposomes accumulate preferentially in atherosclerotic lesional macrophages and promote polarization of macrophages towards an anti-inflammatory M2 phenotype, resulting in attenuation of atherosclerosis progression in both ApoE-/- and Ldlr-/- experimental models. Plaque composition analysis demonstrates that liposomal DHA inhibits macrophage infiltration, reduces lipid deposition, and increases collagen content, thus improving the stability of atherosclerotic plaques against rupture. Matrix-assisted laser desorption/ionization mass spectrometry imaging (MALDI-MSI) further reveals that DHA liposomes can partly restore the complex lipid profile of the plaques to that of early-stage plaques. In conclusion, DHA liposomes offer a promising approach for applying DHA to stabilize atherosclerotic plaques and attenuate atherosclerosis progression, thereby preventing atherosclerosis-related cardiovascular events.

Multi-disciplinary treatment of maxillofacial skeletal deformities by orthognathic surgery combined with periodontal phenotype modification: A case report.

BACKGROUND: Maxillofacial deformities are skeletal discrepancies that cause occlusal, functional, and esthetic problems, and are managed by multi-disciplinary treatment, including careful orthodontic, surgical, and periodontal evaluations. However, thin periodontal phenotype is often overlooked although it affects the therapeutic outcome. Gingival augmentation and periodontal accelerated osteogenic orthodontics (PAOO) can effectively modify the periodontal phenotype and improve treatment outcome. We describe the multi-disciplinary approaches used to manage a case of skeletal Class III malocclusion and facial asymmetry, with thin periodontal phenotype limiting the correction of deformity. CASE SUMMARY: A patient with facial asymmetry and weakness in chewing had been treated with orthodontic camouflage, but the treatment outcome was not satisfactory. After examination, gingiva augmentation and PAOO were performed to increase the volume of both the gingiva and the alveolar bone to allow further tooth movement. After orthodontic decompensation, double-jaw surgery was performed to reposition the maxilla-mandibular complex. Finally, implant placement and chin molding were performed to restore the dentition and to improve the skeletal profile. The appearance and function were significantly improved, and the periodontal tissue remained healthy and stable. CONCLUSION: In patients with dentofacial deformities and a thin periodontal phenotype, multi-disciplinary treatment that includes PAOO could be effective, and could improve both the quality and safety of orthodontic-orthognathic therapy.

Bio-electrocatalytic degradation of tetracycline by stainless-steel mesh based molybdenum carbide electrode.

In order to treat antibiotic wastewater with high efficiency and low energy consumption, this study proposed the coupling of electrocatalytic degradation and biodegradation, and explored a new modified electrocatalytic material in the coupling system. The stainless-steel mesh based molybdenum carbide (SS-Mo2C) was prepared by a low-cost impregnation method and showed superior electrocatalytic degradation ability for tetracycline (TC) when used as the anode in the electrocatalytic system. The degradation rate of TC with SS-Mo2C anode was 17 times higher than that of stainless-steel (SS) anode, and TC removal efficiency was 77% higher than that of SS anode. The electrocatalytic system prior to the biological reactor was proven to be the optimal coupling method. The external coupling system achieved a significantly higher TC removal (87.0%) than that of the internal coupling system (65.3%) and SS-Mo2C showed an excellent repeatable and stable performance. The fewer and smaller molecular weight intermediates products were observed in bio-electrocatalytic system, especially in the external coupling system. Alpha diversity analysis further confirmed that bio-electrocatalytic system increased the diversity of the microbial community. The stainless-steel mesh based molybdenum carbide (SS-Mo2C), which was prepared by a simple and low-cost impregnation method, significantly improved the electrocatalytic activity of anode, thus contributing to tetracycline removal in the bio-electrocatalytic system, especially in the external coupling system.