A nature-inspired multifunctional adhesive for cartilage tissue-biomaterial integration.

Surgical adhesives play a crucial role in tissue integration and repair, yet their application in wet conditions has been severely limited by inadequate adhesive strength and subpar biocompatibility. Furthermore, tissue adhesives have rarely been reported in cartilage tissue repair. In this study, a three-armed dopamine-modified hyaluronic acid derivative adhesive was prepared to function as a bio-inspired adhesive in moist environments. To meet the clinical requirements for cartilage tissue adhesion, we studied its chemical structure, including microscopic morphology, adhesion properties with materials and tissues, in vivo degradation rules, and biological evaluation. The OGMHA8-DOPA adhesive with the optimal aldehyde substitution degree and dopamine-grafting rate was determined by analyzing the experimental conditions. SEM results revealed that the cartilage tissue adhered to a porous interconnected structure. The excellent biocompatibility of the material not only facilitated chondrocyte adhesion but also supported their proliferation on its surface. Animal experiments have demonstrated that this material has no observable inflammatory response or incidence of fibrous capsule formation. The degradation timeline of the material extends beyond the duration of two weeks. The dopamine-modified adhesive exhibited a tight interfacial binding force between the biomaterial and cartilage tissue and excellent biocompatibility in watery tissue, revealing its potential for application in cartilage tissue repair and minimally invasive surgery.

Data-Independent Acquisition-Based Quantitative Proteomic Analysis Reveals Potential Salivary Biomarkers of Primary Sjögren's Syndrome.

Objective As primary Sj?gren's syndrome (pSS) primarily affects the salivary glands, saliva can serve as an indicator of the glands' pathophysiology and the disease's status. This study aims to illustrate the salivary proteomic profiles of pSS patients and identify potential candidate biomarkers for diagnosis.Methods The discovery set contained 49 samples (24 from pSS and 25 from age- and gender-matched healthy controls [HCs]) and the validation set included 25 samples (12 from pSS and 13 from HCs). Totally 36 pSS patients and 38 HCs were centrally randomized into the discovery set or to the validation set at a 2:1 ratio. Unstimulated whole saliva samples from pSS patients and HCs were analyzed using a data-independent acquisition (DIA) strategy on a 2D LC?HRMS/MS platform to reveal differential proteins. The crucial proteins were verified using DIA analysis and annotated using gene ontology (GO) and International Pharmaceutical Abstracts (IPA) analysis. A prediction model for SS was established using random forests.Results A total of 1,963 proteins were discovered, and 136 proteins exhibited differential representation in pSS patients. The bioinformatic research indicated that these proteins were primarily linked to immunological functions, metabolism, and inflammation. A panel of 19 protein biomarkers was identified by ranking order based on P-value and random forest algorichm, and was validated as the predictive biomarkers exhibiting good performance with area under the curve (AUC) of 0.817 for discovery set and 0.882 for validation set.Conclusions The candidate protein panel discovered may aid in pSS diagnosis. Salivary proteomic analysis is a promising non-invasive method for prognostic evaluation and early and precise treatments for pSS patients. DIA offers the best time efficiency and data dependability and may be a suitable option for future research on the salivary proteome.

The effect of build angle on the tissue surface adaptation of maxillary and mandibular complete denture bases manufactured by digital light processing.

STATEMENT OF PROBLEM: The effect of different build angles on the tissue surface adaptation of complete denture bases manufactured by digital light processing (DLP) is unclear. PURPOSE: The purpose of this in vitro study was to evaluate the effect of build angle on the tissue surface adaptation of DLP-printed complete denture bases. MATERIAL AND METHODS: Both maxillary and mandibular denture bases were virtually designed based on reference casts and fabricated by the DLP technique. For each arch, a total of 40 denture bases were fabricated with 4 different build angle conditions (90, 100, 135, and 150 degrees) and divided into 4 groups (90D, 100D, 135D, and 150D; 10 denture bases per group). The scanned intaglio surface of each DLP denture base was superimposed on the scanned edentulous area of the reference cast to compare the degree of tissue surface adaptation. Root-mean-square estimate, positive average deviation, and negative average deviation values were measured and displayed with a color deviation map. The Mann-Whitney test and Kruskal-Wallis analysis of variance were used for statistical analyses (α=.05). RESULTS: No statistically significant differences were found for root-mean-square estimate values among any build angle groups in either the maxillary or mandibular arch. With the increase of build angles, the area of positive deviation in the maxillary arch moved from the palatal region to the posterior palatal seal area, and negative deviation became pronounced at the posterior tuberosity. In the maxillary arch, the 135D group showed favorable color distribution of surface deviation. In the mandibular arch, a positive deviation was detected at the labial slope to the crest of the ridge, whereas a negative deviation was observed at the buccal shelf and the retromolar pad. The 100D group showed favorable distribution of surface deviation in the mandible. CONCLUSIONS: In both arches, the difference of overall tissue surface adaptation was not statistically significant in the 4 different build angles. However, the color deviation map revealed that the 135-degree build angle may be appropriate in the maxillary DLP-printed denture base and the 100-degree angle, in the mandibular denture base.

In vitro and in vivo brain-targeting chemo-photothermal therapy using graphene oxide conjugated with transferrin for Gliomas.

Current therapies for treating malignant glioma exhibit low therapeutic efficiency because of strong systemic side effects and poor transport across the blood brain barrier (BBB). Herein, we combined targeted chemo-photothermal glioma therapy with a novel multifunctional drug delivery system to overcome these issues. Drug carrier transferrin-conjugated PEGylated nanoscale graphene oxide (TPG) was successfully synthesized and characterized. When loaded on the proposed TPG-based drug delivery (TPGD) system, the anticancer drug doxorubicin could pass through the BBB and improve drug accumulation both in vitro and in vivo. TPGD was found to perform dual functions in chemotherapy and photothermal therapy. Targeted TPGD combination therapy showed higher rates of glioma cell death and prolonged survival of glioma-bearing rats compared with single doxorubicin or PGD therapy. In conclusion, we developed a potential nanoscale drug delivery system for combined therapy of glioma that can effectively decrease side effects and improve therapeutic effects.

Ultrasmall Bi/Cu Coordination Polymer Combined with Glucose Oxidase for Tumor Enhanced Chemodynamic Therapy by Starvation and Photothermal Treatment.

Multi-modal combination therapy for tumor is expected to have superior therapeutic effect compared with monotherapy. In this study, a super-small bismuth/copper-gallic acid coordination polymer nanoparticle (BCN) protected by polyvinylpyrrolidone is designed, which is co-encapsulated with glucose oxidase (GOX) by phospholipid to obtain nanoprobe BCGN@L. It shows that BCN has an average size of 1.8 ± 0.7 nm, and photothermal conversion of BCGN@L is 31.35% for photothermal imaging and photothermal therapy (PTT). During the treatment process of 4T1 tumor-bearing nude mice, GOX catalyzes glucose in the tumor to generate gluconic acid and hydrogen peroxide (H2 O2 ), which reacts with copper ions (Cu2+ ) to produce toxic hydroxyl radicals (•OH) for chemodynamic therapy (CDT) and new fresh oxygen (O2 ) to supply to GOX for further catalysis, preventing tumor hypoxia. These reactions increase glucose depletion for starvation therapy , decrease heat shock protein expression, and enhance tumor sensitivity to low-temperature PTT. The in vitro and in vivo results demonstrate that the combination of CDT with other treatments produces excellent tumor growth inhibition. Blood biochemistry and histology analysis suggests that the nanoprobe has negligible toxicity. All the positive results reveal that the nanoprobe can be a promising approach for incorporation into multi-modal anticancer therapy.

Cancer of unknown primary site in the mandibular region: A case report.

The diagnosis and treatment of cancer of unknown primary site (CUP) present with difficulties and produce a poor prognosis. The current study presents the case of a patient with CUP in the mandibular region was treated with docetaxel and lobaplatin chemotherapy, and vascular embolization of the tumor. The tumor size was markedly reduced and the patient's quality of life improved following radiotherapy. The present case report is accompanied by a discussion of the literature to contextualize the treatment regimen for patients with CUP. These findings will support current treatment practices, inform oncologists and benefit patients with cancer.

[Research on cationic vector-mediated RNAi].

In order to study the efficiency of small interfering RNA (siRNA) transfer mediated by cationic liposome, we used luciferase siRNA to evaluate the gene silencing activity in the Hep-2 cells, which were stably transduced with a luciferase gene. The pDNA transfection was studied, and siRNA arrearage assay was conducted to determine the capability of cationic liposome with siRNA. Different concentrations of siRNA was used to silence luciferase gene' activity, and then the result was examined by microplate reader. Cell viability was analyzed after transfection by MTT assay. The results suggested that Lipofectamine 2000 could transfer the pDNA efficiently, and have strong binding capacity with siRNA. The silencing efficiency of luciferase was obtained with low concentration of siRNA. The cell viability was influenced by RNA interference (RNAi) very slightly, but the cell survival rate decreased with the increase of siRNA concentrations. It was well concluded that by optimizing the experimental conditions, cationic liposome can transfer low concentration siRNA to silence target gene's activity efficiently.

Cobalt Phthalocyanine Cross-Linked Polypyrrole for Efficient Electroreduction of Low Concentration CO2 To CO.

Immobilizing cobalt phthalocyanine (CoPc) onto the electrode surface is a significant approach to performing efficient electrochemical CO2 reduction reaction (ECO2 RR). Herein, sulfylphenoxy decorated CoPc cross-linked polypyrrole is prepared by in situ polymerization on the surface of carbon cloth. The synthesized N-rich catalyst exhibits above 95 % Faradaic efficiency toward CO (FECO ) at -0.9 V versus reversible hydrogen electrode (RHE) at least for 10 h in aqueous solution and even enables direct electrolysis at low CO2 concentrations, being potential for coupling ECO2 RR with CO2 capture. This facile in situ polymerization strategy would pave the way for developing efficient and practical electrocatalysis for ECO2 RR.

A new polyacetylene and other constituents with anti-inflammatory activity from Artemisia halodendron.

A new polyacetylene, (3 R,8S)-heptadeca-1,16-dien-4,6-diyne-3,8-diol (1), together with 10 known compounds (2-11) were isolated from an ethanol extract of Artemisia halodendron Turcz. ex Bess. (Asteraceae). The chemical structures of these compounds were elucidated by NMR and HR-ESI-MS analysis, and by comparing these results with data reported in literatures. Compounds 1-11 were evaluated for their inhibitory activity against NO, TNF-α and IL-6 production. Compounds 1-11 significantly inhibited the levels of NO, TNF-α and IL-6 in LPS-induced RAW264.7 cells in a dose-dependent manner, with IC50 values ranging from 15.12 to 66.97 µM.

Enzyme-Adsorbed Chitosan Nanogel Particles as Edible Pickering Interfacial Biocatalysts and Lipase-Responsive Phase Inversion of Emulsions.

Here, a simple food-grade Pickering emulsion system is prepared and adopted for biphasic biocatalytic reactions. The chitosan nanogels were prepared with strong dispersion of chitosan aggregates approaching neutral pH and then used as the particle emulsifiers to produce oil-in-water Pickering emulsions. The chitosan nanogel exhibited high affinity to negatively charged lipase. As a result of increasing the biphasic interfacial area and loading amount on the oil-water interface, the catalysis activity of lipase and recycling and pH stability were highly enhanced through colorimetric determination of p-nitrophenol (the hydrolysis product of p-nitrophenyl palmitate). A general strategy was proposed to obtain stimulus-responsive Pickering emulsions that can undergo phase inversion. The in situ modification of the wettability of chitosan nanogel could be attributed to the interaction between nanogel and free fatty acids, which was triggered by lipase hydrolysis. This would permit a rapid and controlled release of hydrophobic active components in response to enzymatic triggers.

[Retrospective study on transcrestal sinus floor elevation with simultaneous implantation of short implants].

OBJECTIVE: To explore the changes in bone height of the maxillary sinus floor at different sinus ridge heights after transcrestal sinus floor elevation (tSFE) with the simultaneous implantation of short implants. METHODS: A total of 74 Bicon short implants were implanted into 37 patients during the same period of maxillary sinus elevation. The residual bone height (RBH)<4 mm group has 43 sites, and the RBH≥4 mm group has 31 sites. After 5 years of follow-up observation, the implant survival rate and the change in bone height achieved in the maxillary sinus over time were measured and analyzed via clinical examination and X-ray imaging. RESULTS: In the 74 implantation sites, the elevation height of the sinus floor was (6.64±1.32) mm and the bone height of the sinus floor was (3.35±1.29) mm 5 years after loading. No statistical difference was observed in the bone resorption of the implant neck between the RBH<4 mm and RBH≥4 mm groups. Meanwhile, a statistical difference was noted in the bone height obtained in the maxillary sinus between the two groups. CONCLUSIONS: When RBH in the maxillary posterior tooth area was <4 mm, the simultaneous implantation of Bicon short implants with tSFE can achieve a high implant survival rate and bone gain in the maxillary sinus, but does not increase the absorption of the alveolar ridge bone.

Polydopamine Nanoparticles for Deep Brain Ablation via Near-Infrared Irradiation.

Local resection or ablation remains an important approach to treat drug-resistant central neurological disease. Conventional surgical approaches are designed to resect the diseased tissues. The emergence of photothermal therapy (PTT) offers a minimally invasive alternative. However, their poor penetration and potential off-target effect limit their clinical application. Here, polydopamine nanoparticles (PDA-NPs) were prepared and characterized. Studies were performed to evaluate whether PDA-NPs combined with near-infrared (NIR) light can be used to ablate deep brain structures in vitro and in vivo. PDA-NPs were prepared with a mean diameter of ∼150 nm. The particles show excellent photothermal conversion efficiency. PDA-NPs did not show remarkable cytotoxicity against neuronal-like SH-SY5Y cell lines. However, it can cause significant cell death when combined with NIR irradiation. Transcranial NIR irradiation after PDA-NPs administration induced enhanced local hyperthermia as compared with NIR alone. Local temperature exceeded 60 °C after 6 min of irradiation plus PDA while it can only reach 48 °C with NIR alone. PTT with PDA (10 mg/mL, 3 µL) and NIR (1.5 W/cm2) can ablate deep brain structures precisely with an ablation volume of ∼6.5 mm3. Histological analysis confirmed necrosis and apoptosis in the targeted area. These results demonstrate the potential of NP-assisted PTT for the treatment against nontumorous central neurological diseases.

[Research progress on substitutes for autogenous soft tissue grafts in mucogingival surgery].

Mucogingival surgery is a general term for periodontal surgeries that correct aberrant periodontal soft tissues. Conventional mucogingival surgeries with pedicle flap or autologous soft tissue graft for treatment of gingival recession and insufficient keratinized tissues are always related to disadvantages such as need for a second surgery site, limited supplies, and complaints for postoperative discomfort. In this regard, research and application of soft tissue substitutes have gained increasing attention. Various kinds of soft tissue substitutes, including acellular dermal matrix and xenogeneic collagen matrix, have been developed and applied to clinical treatment. This review aims to summarize advances in research of the characteristics and clinical effectiveness of several soft tissue substitutes and provide references for clinical application.

Dye-free near-infrared surface-enhanced Raman scattering nanoprobes for bioimaging and high-performance photothermal cancer therapy.

Near-infrared surface-enhanced Raman scattering (NIR SERS) imaging is now a promising molecular imaging technology due to its narrow spectral bandwidth, low background interference and deep imaging depth. In this work, we report a novel strategy for fabrication of NIR SERS nanoprobes without using any expensive and highly toxic organic dyes. Multifunctional conducting polymer (CP) materials, serving as both biocompatible surface coatings and NIR-active reporters, are directly fabricated on the surface of gold nanorods (GNRs) via facile oxidative polymerization. The dye-free NIR SERS nanoprobes (GNR-CPs) exhibit good structural stability, good biocompatibility and intriguing NIR SERS activity. GNR-CPs also show an extraordinary NIR photothermal transduction efficiency, indicating the potential for cancer therapy. The applications of GNR-CPs as new types of theranostic agents for NIR SERS imaging and high-performance photothermal therapy are accomplished in vitro and in vivo.

Fabrication and Characterization of Stable Soy ß-Conglycinin-Dextran Core-Shell Nanogels Prepared via a Self-Assembly Approach at the Isoelectric Point.

The preparation of soy ß-conglycinin-dextran nanogels (∼90 nm) went through two stages, which are safe, facile, and green. First, amphiphilic graft copolymers were formed by dextran covalently attaching to ß-conglycinin via Maillard dry-heating reaction. Second, the synthesized conjugates were heated above the denaturation temperature at the isoelectric point (pH4.8) so as to assemble nanogels. The effects of pH, concentration, heating temperature, and time on the fabrication of nanogels were examined. The morphology study displayed that the nanogels exhibited spherical shape with core-shell structures, which was reconfirmed by zeta-potential investigation. Both circular dichroism spectra and surface hydrophobicity analyses indicated that the conformations of ß-conglycinin in the core of nanogels were changed, and the latter experiment further revealed that the hydrophobic groups of ß-conglycinin were exposed to the surface of protein. The nanogels were stable against various conditions and might be useful to deliver hydrophobic bioactive compounds.

[Ectopic osteogenesis of tissue engineered bone with slow-released bioactive factors].

OBJECTIVE: To study the ectopic osteogenesis of tissue engineered bone with recombinant human bone morphogenetic protein/transforming growth factor-beta (rhBMP/TGF-beta) or WO-1 slow-released factors. METHODS: Partial demineralized freeze-dried bone (PDFDB) of pig was used as scaffold material. rhBMP/TGF-beta or WO-1 were pre-coated on the surface of material by means of vacuum negative pressure absorption, and then coated with polylactic acid (PLA) to make slow-released material. There were six group: PDFDB material (group A); PDFDB combined with osteoblasts (group B); PDFDB material with rhBMP/TGF-beta slow-released system (group C); PDFDB material combined with rhBMP/TGF-beta slow-released system osteoblasts (group D); PDFDB with WO-1 slow-released system (group E); PDFDB material combined with WO-1 slow-released system and osteoblasts (group F) were implanted in bilateral lower limbs of 36 Newzealand rabbits respectively (6 rabbits in each groups). Histological, histochemical and biochemical analysis were detected 2, 4, 6, 8 weeks after operation. RESULTS: Within the observation periods, no osteogenesis was observed in group A. The osteogenesis in group B, D, F were superior to that of group C and E (P < 0.05). The osteogenetic activity in group C and E was delayed. The quantity and quality of osteogenesis in group D and F were 2 weeks ahead of time compared with group B, and 4 weeks to that of group C and E. The newborn calcification content was superior to that of group A, C, and E (P < 0.05). CONCLUSIONS: The osteogenesis of PDFDB materials with BMP/TGF-beta or WO-1 is slower than that of which combined with osteoblasts. Simple material PDFDB has no ectopic osteogenesis.

The Synthesis and characteristic study of transferrin-conjugated liposomes carrying brain-derived neurotrophic factor.

This study aimed to establish a novel non-viral liposome vector delivering brain derived neurotrophic factor (BDNF) through the blood brain barrier. For this purpose, different water-oil ratios were tested to create liposomes for packaging the prophase synthesized plasmids encoding the BDNF proteins. In order to increase the targeted and peripheral circulation time, we connected the liposomes with transferrin (Tf) and a polyethylene glycol (PEG) long chain. The non-isotope method was used to measure the liposome envelopment ratio and ligand-binding ratio, and also to detect molecular biological features, such as particle size and stability. Tf-conjugated liposomes could be synthesized satisfactorily under the following conditions: the ratio of phospholipid to cholesterol was 1:1; the ratio of enter to plasmid was 100:1; oil phase was dichloromethane; the oil to water ratio was 4:1; the rotary evaporation temperature was 30 °C; the ultrasonic temperature was 10 °C; the ultrasonic time was 10 min; and 10% trehalose was in the presence. Generated liposomes had a uniform circular shape and particle size distribution. In this experiment, we successfully established a new type of Tf-conjugated liposomes carrying the gene of BDNF and the study provides an experimental basis for the future.

In vitro inhibition of bovine enamel demineralization by enamel matrix derivative.

This study aimed to determine whether enamel matrix derivative (Emdogain) affects the demineralization of bovine enamel in vitro and to assess the agent's anti-caries potential. Bovine enamel blocks were prepared and randomly divided into three groups (n = 15 per group), which were treated with distilled water (negative control), NaF (positive control), or Emdogain. All three groups were pH-cycled 12 times over 6 days. The percentage of surface enamel microhardness reduction (%SMHR), calcium demineralization rate (CDR), surface roughness, lesion depth and mineral loss after demineralization were examined. Surface morphology of specimens was studied by scanning electron microscopy. The Emdogain and positive control groups showed similar surface roughness, lesion depths and mineral loss, which were significantly lower than those in the negative control group. In addition, the enamel surfaces of both the Emdogain and NaF groups showed much narrower intercrystalline spaces than the surfaces of the negative control group, which exhibited extensive microfractures along the crystal edges. %SMHR differed significantly among all three groups, with the smallest value in the Emdogain group and the greatest in the negative control group. These results indicate that enamel matrix derivative (Emdogain) can significantly inhibit demineralization of bovine enamel in vitro, suggesting that it has potential as an anti-caries agent.

Formation of complex interface and stability of oil-in-water (O/W) emulsion prepared by soy lipophilic protein nanoparticles.

A lipophilic protein nanoparticle (LPP) was fabricated by ultrasonication of the soy lipophilic protein (LP), which contains hydrophobic proteins and phospholipids. This LPP (Rh = 136 ± 0.8 nm, ζ-potential = -20 mV, pH 7.0) had an improved dispersibility and acted as an emulsifier. The oil/water (O/W) emulsion stabilized by this LPP exhibited superior physical stability over long-term storage (8 weeks), during a stress storage test (200 mM NaCl addition and heating at 90 °C), and in the presence of Tween 20 (1.0-4.0 wt %), in contrast to those emulsions stabilized by ß-conglycinin and glycinin. Langmuir-Blodgett method and interface pressure determination revealed that LPP formed rigid and rough granular film at air/water interface. The excellent stability of emulsions stabilized by LPP highlights the synergic effect between hydrophobic proteins and phospholipids. These findings suggest that the complexes of hydrophobic protein aggregates and biosurfactant could form a stable interface which could be developed into a novel strategy to fabricate a stable food emulsion.

Development of novel zein-sodium caseinate nanoparticle (ZP)-stabilized emulsion films for improved water barrier properties via emulsion/solvent evaporation.

This work attempted to develop novel high barrier zein/SC nanoparticle (ZP)-stabilized emulsion films through microfluidic emulsification (ZPE films) or in combination with solvent (ethyl acetate) evaporation techniques (ZPE-EA films). Some physical properties, including tensile and optical properties, water vapor permeability (WVP), and surface hydrophobicity, as well as the microstructure of ZP-stabilized emulsion films were evaluated and compared with SC emulsion (SCE) films. The emulsion/solvent evaporation approach reduced lipid droplets of ZP-stabilized emulsions, and lipid droplets of ZP-stabilized emulsions were similar to or slightly lower than that of SC emulsions. However, ZP- and SC-stabilized emulsion films exhibited a completely different microstructure, nanoscalar lipid droplets were homogeneously distributed in the ZPE film matrix and interpenetrating protein-oil complex networks occurred within ZPE-EA films, whereas SCE films presented a heterogeneous microstructure. The different stabilization mechanisms against creaming or coalescence during film formation accounted for the preceding discrepancy of the microstructures between ZP-and SC-stabilized emulsion films. Interestingly, ZP-stabilized emulsion films exhibited a better water barrier efficiency, and the WVP values were only 40-50% of SCE films. A schematic representation for the formation of ZP-stabilized emulsion films was proposed to relate the physical performance of the films with their microstructure and to elucidate the possible forming mechanism of the films.