A soft microrobot with highly deformable 3D actuators for climbing and transitioning complex surfaces.

The climbing microrobots have attracted growing attention due to their promising applications in exploration and monitoring of complex, unstructured environments. Soft climbing microrobots based on muscle-like actuators could offer excellent flexibility, adaptability, and mechanical robustness. Despite the remarkable progress in this area, the development of soft microrobots capable of climbing on flat/curved surfaces and transitioning between two different surfaces remains elusive, especially in open spaces. In this study, we address these challenges by developing voltage-driven soft small-scale actuators with customized 3D configurations and active stiffness adjusting. Combination of programmed strain distributions in liquid crystal elastomers (LCEs) and buckling-driven 3D assembly, guided by mechanics modeling, allows for voltage-driven, complex 3D-to-3D shape morphing (bending angle > 200°) at millimeter scales (from 1 to 10 mm), which is unachievable previously. These soft actuators enable development of morphable electroadhesive footpads that can conform to different curved surfaces and stiffness-variable smart joints that allow different locomotion gaits in a single microrobot. By integrating such morphable footpads and smart joints with a deformable body, we report a multigait, soft microrobot (length from 6 to 90 mm, and mass from 0.2 to 3 g) capable of climbing on surfaces with diverse shapes (e.g., flat plane, cylinder, wavy surface, wedge-shaped groove, and sphere) and transitioning between two distinct surfaces. We demonstrate that the microrobot could navigate from one surface to another, recording two corresponding ceilings when carrying an integrated microcamera. The developed soft microrobot can also flip over a barrier, survive extreme compression, and climb bamboo and leaf.

Submillimeter-scale multimaterial terrestrial robots.

Robots with submillimeter dimensions are of interest for applications that range from tools for minimally invasive surgical procedures in clinical medicine to vehicles for manipulating cells/tissues in biology research. The limited classes of structures and materials that can be used in such robots, however, create challenges in achieving desired performance parameters and modes of operation. Here, we introduce approaches in manufacturing and actuation that address these constraints to enable untethered, terrestrial robots with complex, three-dimensional (3D) geometries and heterogeneous material construction. The manufacturing procedure exploits controlled mechanical buckling to create 3D multimaterial structures in layouts that range from arrays of filaments and origami constructs to biomimetic configurations and others. A balance of forces associated with a one-way shape memory alloy and the elastic resilience of an encapsulating shell provides the basis for reversible deformations of these structures. Modes of locomotion and manipulation span from bending, twisting, and expansion upon global heating to linear/curvilinear crawling, walking, turning, and jumping upon laser-induced local thermal actuation. Photonic structures such as retroreflectors and colorimetric sensing materials support simple forms of wireless monitoring and localization. These collective advances in materials, manufacturing, actuation, and sensing add to a growing body of capabilities in this emerging field of technology.

An Anti-Fatigue Design Strategy for 3D Ribbon-Shaped Flexible Electronics.

Three-dimensional (3D) flexible electronics represent an emerging area of intensive attention in recent years, owing to their broad-ranging applications in wearable electronics, flexible robots, tissue/cell scaffolds, among others. The widely adopted 3D conductive mesostructures in the functional device systems would inevitably undergo repetitive out-of-plane compressions during practical operations, and thus, anti-fatigue design strategies are of great significance to improve the reliability of 3D flexible electronics. Previous studies mainly focused on the fatigue failure behavior of planar ribbon-shaped geometries, while anti-fatigue design strategies and predictive failure criteria addressing 3D ribbon-shaped mesostructures are still lacking. This work demonstrates an anti-fatigue strategy to significantly prolong the fatigue life of 3D ribbon-shaped flexible electronics by switching the metal-dominated failure to desired polymer-dominated failure. Combined in situ measurements and computational studies allow the establishment of a failure criterion capable of accurately predicting fatigue lives under out-of-plane compressions, thereby providing useful guidelines for the design of anti-fatigue mesostructures with diverse 3D geometries. Two mechanically reliable 3D devices, including a resistance-type vibration sensor and a janus sensor capable of decoupled temperature measurements, serve as two demonstrative examples to highlight potential applications in long-term health monitoring and human-like robotic perception, respectively.