Glutathione transferases immobilized on nanoporous alumina: flow system kinetics, screening, and stability.

The previously uncharacterized Drosophila melanogaster Epsilon-class glutathione transferases E6 and E7 were immobilized on nanoporous alumina. The nanoporous anodized alumina membranes were derivatized with 3-aminopropyl-triethoxysilane, and the amino groups were activated with carbonyldiimidazole to allow coupling of the enzymes via ε-amino groups. Kinetic analyses of the immobilized enzymes were carried out in a circulating flow system using CDNB (1-chloro-2,4-dinitrobenzene) as substrate, followed by specificity screening with alternative substrates. A good correlation was observed between the substrate screening data for immobilized enzyme and corresponding data for the enzyme in solution. A limited kinetic study was also carried out on immobilized human GST S1-1 (also known as hematopoietic prostaglandin D synthase). The stability of the immobilized enzymes was virtually identical to that of enzymes in solution, and no leakage of enzyme from the matrix could be observed.

Enzyme kinetics by GH7 cellobiohydrolases on chromogenic substrates is dictated by non-productive binding: insights from crystal structures and MD simulation.

Cellobiohydrolases (CBHs) in the glycoside hydrolase family 7 (GH7) (EC3.2.1.176) are the major cellulose degrading enzymes both in industrial settings and in the context of carbon cycling in nature. Small carbohydrate conjugates such as p-nitrophenyl-ß-d-cellobioside (pNPC), p-nitrophenyl-ß-d-lactoside (pNPL) and methylumbelliferyl-ß-d-cellobioside have commonly been used in colorimetric and fluorometric assays for analysing activity of these enzymes. Despite the similar nature of these compounds the kinetics of their enzymatic hydrolysis vary greatly between the different compounds as well as among different enzymes within the GH7 family. Through enzyme kinetics, crystallographic structure determination, molecular dynamics simulations, and fluorometric binding studies using the closely related compound o-nitrophenyl-ß-d-cellobioside (oNPC), in this work we examine the different hydrolysis characteristics of these compounds on two model enzymes of this class, TrCel7A from Trichoderma reesei and PcCel7D from Phanerochaete chrysosporium. Protein crystal structures of the E212Q mutant of TrCel7A with pNPC and pNPL, and the wildtype TrCel7A with oNPC, reveal that non-productive binding at the product site is the dominating binding mode for these compounds. Enzyme kinetics results suggest the strength of non-productive binding is a key determinant for the activity characteristics on these substrates, with PcCel7D consistently showing higher turnover rates (kcat ) than TrCel7A, but higher Michaelis-Menten (KM ) constants as well. Furthermore, oNPC turned out to be useful as an active-site probe for fluorometric determination of the dissociation constant for cellobiose on TrCel7A but could not be utilized for the same purpose on PcCel7D, likely due to strong binding to an unknown site outside the active site.

A flow-through nanoporous alumina trypsin bioreactor for mass spectrometry peptide fingerprinting.

Mass spectrometry-based proteomics benefits from efficient digestion of protein samples. In this study, trypsin was immobilized on nanoporous anodized alumina membranes to create an enzyme reactor suitable for peptide mass fingerprinting. The membranes were derivatized with 3-aminopropyltriethoxysilane and the amino groups were activated with carbonyldiimidazole to allow coupling of porcine trypsin via ε-amino groups. The function was assessed using the artificial substrate Nα-Benzoyl-L-arginine 4-nitroanilide hydrochloride, bovine ribonuclease A and a human plasma sample. A 10-membrane flow-through reactor was used for fragmentation and MS analysis after a single pass of substrate both by collection of product and subsequent off-line analysis, and by coupling on-line to the instrument. The peptide pattern allowed correct identification of the single target protein in both cases, and of >70 plasma proteins in single pass mode followed by LC-MS analysis. The reactor retained 76% of the initial activity after 14days of storage and repeated use at room temperature. SIGNIFICANCE: This manuscript describes the design of a stable enzyme reactor that allows efficient and fast digestion with negligible leakage of enzyme and enzyme fragments. The high stability facilitates the use in an online-setup with MS detection since it allows the processing of multiple samples within an extended period of time without replacement.

Interactions between model membranes and lignin-related compounds studied by immobilized liposome chromatography.

In order to elucidate the modes of interaction between lignin precursors and membranes, we have studied the influence of temperature, lipid composition and buffer composition on the partitioning of monolignol and dilignol model substances into phospholipid bilayers. The partitioning was determined by immobilized liposome chromatography, which is an established method for studies of pharmaceutical drugs but a new approach in studies of lignin synthesis. The temperature dependence of the retention and the effect of a high ammonium sulfate concentration in the mobile phase demonstrated that the interaction involved both hydrophobic effects and polar interactions. There was also a good correlation between the partitioning and the estimated hydrophobicity, in terms of octanol/water partitioning. The partitioning behavior of the model substances suggests that passive diffusion over the cell membrane is a possible transport route for lignin precursors. This conclusion is strengthened by comparison of the present results with the partitioning of pharmaceutical drugs that are known to pass cell membranes by diffusion.

Processive action of cellobiohydrolase Cel7A from Trichoderma reesei is revealed as 'burst' kinetics on fluorescent polymeric model substrates.

Reaction conditions for the reducing-end-specific derivatization of cellulose substrates with the fluorogenic compound, anthranilic acid, have been established. Hydrolysis of fluorescence-labelled celluloses by cellobiohydrolase Cel7A from Trichoderma reesei was consistent with the active-site titration kinetics (burst kinetics), which allowed the quantification of the processivity of the enzyme. The processivity values of 88+/-10, 42+/-10 and 34+/-2.0 cellobiose units were found for Cel7A acting on labelled bacterial cellulose, bacterial microcrystalline cellulose and endoglucanase-pretreated bacterial cellulose respectively. The anthranilic acid derivatization also provides an alternative means for estimating the average degree of polymerization of cellulose and, furthermore, allows the quantitative monitoring of the production of reducing end groups on solid cellulose on hydrolysis by cellulases. Hydrolysis of bacterial cellulose by cellulases from T. reesei revealed that, by contrast with endoglucanase Cel5A, neither cellobiohydrolases Cel7A nor Cel6A produced detectable amounts of new reducing end groups on residual cellulose.

Surface character of pulp fibres studied using endoglucanases.

The endoglucanase Cel5A from Trichoderma reesei and an endoglucanase from Aspergillus sp. (Novozym 476 from Novozyme A/S) were evaluated as probes for the surface properties of soft- and hardwood chemical pulp fibres. The hydrolysis time curves were in accordance with a two-phase degradation model described by a biexponential function. The kinetic parameters corresponding to the amount of fast and slow degraded parts of the substrate correlated to tensile index, relative bonded area and z-strength of the paper. All paper properties showing a correlation with enzyme kinetic parameters were related to fibre-fibre interactions. Fluorescence labelling of the reducing end groups in pulp fibres followed by enzyme treatment indicated that the fast substrate class corresponds to the population of "loose" cellulose chain ends not tightly associated with the bulk cellulose. The correlation between the parameters of enzyme kinetics and mechanical properties of the paper produced from the corresponding pulp found in this study should allow a rapid evaluation of the raw fibre material used in paper making process.

Dental analgesia produced by non-painful low-frequency stimulation is not influenced by stress or reversed by naloxone.

The dental pain threshold elevation produced by non-painful, low-frequency transcutaneous electrical nerve stimulation (TENS) in healthy humans was not reduced by the administration of 0.8 mg of naloxone i.v. Neither ACTH, prolactin nor growth hormone (GH) release were related to the pain threshold elevations. The present study indicates that the dental pain threshold elevation during non-painful, low-frequency TENS is not based on the same opioid-dependent mechanisms as the dental pain threshold elevation during acupuncture or the clinical analgesia during low-frequency TENS. Stress or other adenohypophyseal mechanisms involving ACTH, prolactin or GH do not explain the analgesia induced by non-painful, low-frequency TENS.

Evaluation of bilayer disks as plant cell membrane models in partition studies.

We have studied the partitioning of a set of phenolic compounds used as lignin precursor models into lipid bilayer disks and liposomes. The bilayer disks are open bilayer structures stabilized by polyethylene glycol-conjugated lipids. Our results indicate that disks generate more accurate partition data than do liposomes. Furthermore, we show that the partitioning into the membrane phase is reduced slightly if disks composed of 1,2-distearoyl-sn-glycero-3-phosphocholine and cholesterol are exchanged for disks with a lipid composition mimicking that of the root tissue of Zea mays L.

Analysis of the surfaces of wood tissues and pulp fibers using carbohydrate-binding modules specific for crystalline cellulose and mannan.

Carbohydrate binding modules (CBMs) are noncatalytic substrate binding domains of many enzymes involved in carbohydrate metabolism. Here we used fluorescent labeled recombinant CBMs specific for crystalline cellulose (CBM1(HjCel7A)) and mannans (CBM27(TmMan5) and CBM35(CjMan5C)) to analyze the complex surfaces of wood tissues and pulp fibers. The crystalline cellulose CBM1(HjCel7A) was found as a reliable marker of both bacterially produced and plant G-layer cellulose, and labeling of spruce pulp fibers with CBM1(HjCel7A) revealed a signal that increased with degree of fiber damage. The mannan-specific CBM27(TmMan5) and CBM35(CjMan5C) CBMs were found to be more specific reagents than a monoclonal antibody specific for (1-->4)-beta-mannan/galacto-(1-->4)-beta-mannan for mapping carbohydrates on native substrates. We have developed a quantitative fluorometric method for analysis of crystalline cellulose accumulation on fiber surfaces and shown a quantitative difference in crystalline cellulose binding sites in differently processed pulp fibers. Our results indicated that CBMs provide useful, novel tools for monitoring changes in carbohydrate content of nonuniform substrate surfaces, for example, during wood or pulping processes and possibly fiber biosynthesis.

Recent developments on cellulases and carbohydrate-binding modules with cellulose affinity.

This review concerns basic research on cellulases and cellulose-specific carbohydrate-binding modules (CBMs). As a background, glycosyl hydrolases are also briefly reviewed. The nomenclature of cellulases and CBMs is discussed. The main cellulase-producing organisms and their cellulases are described. Synergy, enantioseparation, cellulases in plants, cellulosomes, cellulases and CBMs as analytical tools and cellulase-like enzymes are also briefly reviewed.

Use of a fluorescence labelled, carbohydrate-binding module from Phanerochaete chrysosporium Cel7D for studying wood cell wall ultrastructure.

UNLABELLED: The alpha-amino group of the carbohydrate-binding module (CBM) from Phanerochaete chrysosporium cellulase Cel7D was covalently labelled with fluorescein isothiocyanate. The fluorescein-labelled CBM was characterised regarding substrate binding, showing specificity only to cellulose and not to mannan and xylan. Conjugation of fluorescein isothiocyanate to CBM did not affect its binding to cellulose. The labelled CBM was successfully used as a probe for detecting cellulose in lignocellulose material such as never dried spruce and birch wood as well as pulp fibres. ABBREVIATIONS: Bmax, maximum binding capacity; BMCC, bacterial microcrystalline cellulose; CBH, cellobiohydrolase; CBM, carbohydrate-binding module; CBM-FITC, carbohydrate-binding module labelled with fluorescein isothiocyanate; CBM1, carbohydrate-binding module of family 1; FITC, fluorescein isothiocyanate; KD, dissociation constant; RP-HPLC, reversed phase HPLC; S1-S3, Secondary cell wall layers 1-3.

Synergistic cellulose hydrolysis can be described in terms of fractal-like kinetics.

A fractal-like kinetics model was used to describe the synergistic hydrolysis of bacterial cellulose by Trichoderma reesei cellulases. The synergistic action of intact cellobiohydrolase Cel7A and endoglucanase Cel5A at low enzyme-to-substrate ratios showed an apparent substrate inhibition consistent with a case where two-dimensional (2-D) surface diffusion of the cellobiohydrolase is rate-limiting. The action of Cel7A core and Cel5A was instead consistent with a three-dimensional (3-D) diffusion-based mode of action. The synergistic action of intact Cel7A was far superior to that of the core at a high enzyme-to-substrate ratio, but this effect was gradually reduced at lower enzyme-to-substrate ratios. The apparent fractal kinetics exponent h obtained by nonlinear fit of hydrolysis data to the fractal-like kinetics analogue of a first-order reaction was a useful empirical parameter for assessing the rate retardation and its dependence on the reaction conditions.