Gel phantom for use in high-intensity focused ultrasound dosimetry.

An optically transparent phantom was developed for use in high-intensity focused ultrasound (US), or HIFU, dosimetry studies. The phantom is composed of polyacrylamide hydrogel, embedded with bovine serum albumin (BSA) that becomes optically opaque when denatured. Acoustic and optical properties of the phantom were characterized as a function of BSA concentration and temperature. The speed of sound (1544 m/s) and acoustic impedance (1.6 MRayls) were similar to the values in soft tissue. The attenuation coefficient was approximately 8 times lower than that of soft tissues (0.02 Np/cm/MHz for 9% BSA). The nonlinear (B/A) coefficient was similar to the value in water. HIFU lesions were readily seen during formation in the phantom. In US B-mode images, the HIFU lesions were observed as hyperechoic regions only if the cavitation activity was present. The phantom can be used for fast characterization and calibration of US-image guided HIFU devices before animal or clinical studies.

Polyacrylamide gel as an acoustic coupling medium for focused ultrasound therapy.

A hydrogel acoustic coupling medium was investigated as a practical alternative to water for clinical applications of focused ultrasound (US) therapy. Material characterization and functional testing of polyacrylamide gel couplers were performed. Acoustic, bulk and thermal properties were measured. Conical couplers were designed and fabricated to fit a 3.5-MHz, spherically concave transducer for functional tests, including Schlieren imaging, power efficiency measurements and in vivo hemostasis experiments. Polyacrylamide was shown to have favorable acoustic properties that varied linearly with acrylamide concentration from 10% to 20% weight in volume. Attenuation coefficient, sound speed and impedance ranged from 0.08 to 0.14 dB/cm at 1 MHz, 1546 to 1595 m/s and 1.58 to 1.68 Mrayl, respectively. An intraoperative in vivo hemostasis experiment in a sheep model demonstrated that the gel-coupled transducer was capable of inducing hemostasis in actively bleeding splenic and hepatic incisions. The results of this study show that polyacrylamide may be a promising coupling material for focused US therapy.

Comparison of two ultrasonic instruments for post removal.

The relative performance of two different ultrasonic units commonly used clinically for post removal was evaluated using tips designed specifically for post vibration. Twenty-four extracted maxillary and mandibular cuspids with crowns removed at the labial cementoenamel junction were treated endodontically. Post spaces were made 10 mm into the roots before cementing a 16 mm #5 (0.050-inch) Para-Post with zinc phosphate cement. The teeth were divided into three similar groups of eight. Post retention was assessed in group 1. Ultrasonic vibration was applied to groups 2 and 3 until post removal. The average force required to dislodge the posts from the teeth in group 1 (control group, no ultrasound) was 40.5 kg (SD = 12.3 kg). The average time for post removal in group 2 (Spartan) was 4:52 min (SD = 2:26). The average time for post removal in group 3 (Enac) was 1:31 min (SD = 0:34). The difference between groups 2 and 3 was statistically significant (p < 0.005). Use of ultrasonic tips designed for post vibration and maximization of audible sound level during ultrasonic treatment of posts seem to play an important role in the effectiveness and efficiency of post removal. The results obtained indicate that both the Enac ultrasonic unit with the ST-09 vibration tip and the Spartan ultrasonic unit with the Analytic VT-S tip were effective. Nevertheless, the Enac ultrasonic unit with the ST-09 vibration tip was clearly more efficient under these study conditions, resulting in typical post removal times of <2 min.

Effects of nonlinear propagation, cavitation, and boiling in lesion formation by high intensity focused ultrasound in a gel phantom.

The importance of nonlinear acoustic wave propagation and ultrasound-induced cavitation in the acceleration of thermal lesion production by high intensity focused ultrasound was investigated experimentally and theoretically in a transparent protein-containing gel. A numerical model that accounted for nonlinear acoustic propagation was used to simulate experimental conditions. Various exposure regimes with equal total ultrasound energy but variable peak acoustic pressure were studied for single lesions and lesion stripes obtained by moving the transducer. Static overpressure was applied to suppress cavitation. Strong enhancement of lesion production was observed for high amplitude waves and was supported by modeling. Through overpressure experiments it was shown that both nonlinear propagation and cavitation mechanisms participate in accelerating lesion inception and growth. Using B-mode ultrasound, cavitation was observed at normal ambient pressure as weakly enhanced echogenicity in the focal region, but was not detected with overpressure. Formation of tadpole-shaped lesions, shifted toward the transducer, was always observed to be due to boiling. Boiling bubbles were visible in the gel and were evident as strongly echogenic regions in B-mode images. These experiments indicate that nonlinear propagation and cavitation accelerate heating, but no lesion displacement or distortion was observed in the absence of boiling.