Dual-section versus conventional archwire for en-masse retraction of anterior teeth with direct skeletal anchorage: a finite element analysis.

BACKGROUND: The aim of this study is to compare the biomechanical effects of the conventional 0.019 × 0.025-in stainless steel archwire with the dual-section archwire when en-masse retraction is performed with sliding mechanics and skeletal anchorage. METHODS: Models of maxillary dentition equipped with the 0.019 × 0.025-in archwire and the dual-section archwire, whose anterior portion is 0.021 × 0.025-in and posterior portion is 0.018 × 0.025-in were constructed. Then, long-term tooth movement during en-masse retraction was simulated using the finite element method. Power arms of 8, 10, 12 and 14 mm length were employed to control anterior torque, and retraction forces of 2 N were applied with a direct skeletal anchorage. RESULTS: For achieving bodily movement of the incisors, power arms longer than 14 mm were required for the 0.019 × 0.025-in archwire, while between 8 and 10 mm for the dual-section archwire. The longer the power arms, the greater the counter-clockwise rotation of the occlusal plane was produced. Frictional resistance generated between the archwire and brackets and tubes on the posterior teeth was smaller than 5% of the retraction force of 2 N. CONCLUSIONS: The use of dual-section archwire might bring some biomechanical advantages as it allows to apply retraction force at a considerable lower height, and with a reduced occlusal plane rotation, compared to the conventional archwire. Clinical studies are needed to confirm the present results.

Autologous Platelet Concentrates in Treatment of Furcation Defects-A Systematic Review and Meta-Analysis.

BACKGROUND: The aim of this review was to evaluate the adjunctive effect of autologous platelet concentrates (APCs) for the treatment of furcation defects, in terms of scientific quality of the clinical trials and regeneration parameters assessment. METHODS: A systematic search was carried out in the electronic databases MEDLINE, SCOPUS, CENTRAL (Cochrane Central Register of Controlled Trials), and EMBASE, together with hand searching of relevant journals. Two independent reviewers screened the articles yielded in the initial search and retrieved the full-text version of potentially eligible studies. Relevant data and outcomes were extracted from the included studies. Risk of bias assessment was also carried out. The outcome variables, relative to baseline and post-operative defect characteristics (probing pocket depth (PPD), horizontal and vertical clinical attachment loss (HCAL, VCAL), horizontal and vertical furcation depth (HFD, VFD) were considered for meta-analysis. RESULTS: Ten randomized trials were included in this review. Only one study was judged at high risk of bias, while seven had a low risk, testifying to the good level of the evidence of this review. The meta-analysis showed a favorable effect regarding all outcome variables, for APCs used in adjunct to open flap debridement (p < 0.001). Regarding APCs in adjunct to bone grafting, a significant advantage was found only for HCAL (p < 0.001, mean difference 0.74, 95% CI 0.54, 0.94). The sub-group analysis showed that both platelet-rich fibrin and platelet-rich plasma in adjunct with open flap debridement, yielded significantly favorable results. No meta-analysis was performed for APCs in combination with guided tissue regeneration (GTR) as only one study was found. CONCLUSION: For the treatment of furcation defects APCs may be beneficial as an adjunct to open flap debridement alone and bone grafting, while limited evidence of an effect of APCs when used in combination with GTR was found.

Autologous platelet concentrates for treating periodontal infrabony defects.

BACKGROUND: Periodontal disease is a condition affecting tooth-supporting tissues (gingiva, alveolar bone, periodontal ligament, and cementum), with the potential of introducing severe adverse effects on oral health. It has a complex pathogenesis which involves the combination of specific micro-organisms and a predisposing host response. Infrabony defects are one of the morphological types of alveolar bone defects that can be observed during periodontitis. Recent approaches for the treatment of infrabony defects, combine advanced surgical techniques with platelet-derived growth factors. These are naturally synthesized polypeptides, acting as mediators for various cellular activities during wound healing. It is believed that the adjunctive use of autologous platelet concentrates to periodontal surgical procedures produces a better and more predictable outcome for the treatment of infrabony defects. OBJECTIVES: To assess the effects of autologous platelet concentrates (APC) used as an adjunct to periodontal surgical therapies (open flap debridement (OFD), OFD combined with bone grafting (BG), guided tissue regeneration (GTR), OFD combined with enamel matrix derivative (EMD)) for the treatment of infrabony defects. SEARCH METHODS: Cochrane Oral Health's Information Specialist searched the following databases: Cochrane Oral Health's Trials Register (to 27 February 2018); the Cochrane Central Register of Controlled Trials (CENTRAL; 2018, Issue 1) in the Cochrane Library (searched 27 February 2018); MEDLINE Ovid (1946 to 27 February 2018); Embase Ovid (1980 to 27 February 2018); and LILACS BIREME Virtual Health Library (from 1982 to 27 February 2018). The US National Institutes of Health Ongoing Trials Register (ClinicalTrials.gov) and the World Health Organization International Clinical Trials Registry Platform were searched for ongoing trials on 27 February 2018. No restrictions were placed on the language or date of publication when searching the electronic databases. SELECTION CRITERIA: We included randomised controlled trials (RCTs) of both parallel and split-mouth design, involving patients with infrabony defects requiring surgical treatment. Studies had to compare treatment outcomes of a specific surgical technique combined with APC, with the same technique when used alone. DATA COLLECTION AND ANALYSIS: Two review authors independently conducted data extraction and risk of bias assessment, and analysed data following Cochrane methods. The primary outcomes assessed were: change in probing pocket depth (PD), change in clinical attachment level (CAL), and change in radiographic bone defect filling (RBF). We organised all data in four groups, each comparing a specific surgical technique when applied with the adjunct of APC or alone: 1. APC + OFD versus OFD, 2. APC + OFD + BG versus OFD + BG, 3. APC + GTR versus GTR, and 4. APC + EMD versus EMD. MAIN RESULTS: We included 38 RCTs. Twenty-two had a split-mouth design, and 16 had a parallel design. The overall evaluated data included 1402 defects. Two studies were at unclear overall risk of bias, while the remaining 36 studies had a high overall risk of bias.1. APC + OFD versus OFD alone Twelve studies were included in this comparison, with a total of 510 infrabony defects. There is evidence of an advantage in using APC globally from split-mouth and parallel studies for all three primary outcomes: PD (mean difference (MD) 1.29 mm, 95% confidence interval (CI) 1.00 to 1.58 mm; P < 0.001; 12 studies; 510 defects; very low-quality evidence); CAL (MD 1.47 mm, 95% CI 1.11 to 1.82 mm; P < 0.001; 12 studies; 510 defects; very low-quality evidence); and RBF (MD 34.26%, 95% CI 30.07% to 38.46%; P < 0.001; 9 studies; 401 defects; very low-quality evidence).2. APC + OFD + BG versus OFD + BG Seventeen studies were included in this comparison, with a total of 569 infrabony defects. Considering all follow-ups, as well as 3 to 6 months and 9 to 12 months, there is evidence of an advantage in using APC from both split-mouth and parallel studies for all three primary outcomes: PD (MD 0.54 mm, 95% CI 0.33 to 0.75 mm; P < 0.001; 17 studies; 569 defects; very low-quality evidence); CAL (MD 0.72 mm, 95% CI 0.43 to 1.00 mm; P < 0.001; 17 studies; 569 defects; very low-quality evidence); and RBF (MD 8.10%, 95% CI 5.26% to 10.94%; P < 0.001; 11 studies; 420 defects; very low-quality evidence).3. APC + GTR versus GTR alone Seven studies were included in this comparison, with a total of 248 infrabony defects. Considering all follow-ups, there is probably a benefit for APC for both PD (MD 0.92 mm, 95% CI -0.02 to 1.86 mm; P = 0.05; very low-quality evidence) and CAL (MD 0.42 mm, 95% CI -0.02 to 0.86 mm; P = 0.06; very low-quality evidence). However, given the wide confidence intervals, there might be a possibility of a slight benefit for the control. When considering a 3 to 6 months and a 9 to 12 months follow-up there were no benefits evidenced, except for CAL at 3 to 6 months (MD 0.54 mm, 95% CI 0.18 to 0.89 mm; P = 0.003; 3 studies; 134 defects). No RBF data were available.4. APC + EMD versus EMDTwo studies were included in this comparison, with a total of 75 infrabony defects. There is insufficient evidence of an overall advantage of using APC for all three primary outcomes: PD (MD 0.13 mm, 95% CI -0.05 to 0.30 mm; P = 0.16; 2 studies; 75 defects; very low-quality evidence), CAL (MD 0.10 mm, 95% CI -0.13 to 0.32 mm; P = 0.40; 2 studies; 75 defects; very low-quality evidence), and RBF (MD -0.60%, 95% CI -6.21% to 5.01%; P = 0.83; 1 study; 49 defects; very low-quality evidence).All studies in all groups reported a survival rate of 100% for the treated teeth. No complete pocket closure was reported. No quantitative analysis regarding patients' quality of life was possible. AUTHORS' CONCLUSIONS: There is very low-quality evidence that the adjunct of APC to OFD or OFD + BG when treating infrabony defects may improve probing pocket depth, clinical attachment level, and radiographic bone defect filling. For GTR or EMD, insufficient evidence of an advantage in using APC was observed.

Clinical Use of Aligners Associated with Nuvola® OP System for Transverse Maxillary Deficiency: A Retrospective Study on 100 Patients.

Introduction: Aligners represent a common treatment for orthodontic patients thanks to their countless advantages including aesthetics, comfort, and oral hygiene maintenance; at the same time, they are associated with a reduced number of visits and a low incidence of complications. Although aligners have undergone considerable improvements over time, to date they have limitations in resolving the most serious malocclusions related to transverse maxillary deficiency. The aim of the present study was to retrospectively evaluate an orthodontic protocol (the Nuvola® OP System) which associates a morpho-functional corrector (to be used for 30 min/day) with the aligner, allowing for the treatment of cases that would be difficult or unpredictable with aligners alone. Methods: Linear measurements were taken on STL files of 100 patients. In 77 patients between 18 and 55 years (mean 28.6 ± 16.2 (standard deviation) years), 3D superimpositions of the maxilla obtained from intraoral scans before and after treatment were performed in order to evaluate the degree of maxillary expansion. The normality of the data distribution was tested. The pre- and post-treatment data were compared using a paired t-test with a 5% significance level. After treatment, a questionnaire was proposed to assess patients' degree of satisfaction and compliance. Results: A statistically significant difference (p < 0.05) for each distance evaluated was found. The maximum expansion was obtained at the first molar level (2.35 ± 1.64 mm). Of the subjects who completed the questionnaire, 96% were satisfied and 90% were able to perform the protocol without difficulty for the required duration. Conclusions: A significant expansion of the maxillary arch as well as a high degree of patient satisfaction and compliance were observed with the Nuvola® OP System. Further studies are needed in order to clinically evaluate the relative contribution of the aligners and morpho-functional device to the obtained expansion.

Silver Diamine Fluoride (SDF) Efficacy in Arresting Cavitated Caries Lesions in Primary Molars: A Systematic Review and Metanalysis.

A systematic review and meta-analysis were carried out to evaluate the efficacy of silver diamine fluoride (SDF) in controlling caries progression in cavitated primary molars. A search for randomized and non-randomized trials with follow-up > 6 months was performed using PubMed, Scopus and Embase. The Cochrane risk of bias tools were used for the quality assessment. The success rate and odds ratios were chosen to calculate the effect size for the meta-analysis. A total of 792 papers were identified and 9 were selected. A high variability regarding SDF application protocol was found; otherwise, caries arrest was always recorded using visual/tactile methods. Two studies were judged at low risk of bias, six at moderate risk and one at high risk. Data from five studies were aggregated for meta-analysis. Heterogeneity was found moderate (I2 = 35.69%, p = 0.18). SDF application was found to be overall effective (fixed effect model) in arresting caries progression (ES = 0.35, p < 0.01). In a total of 622 arrested lesions, out of 1205 considered, the caries arrest rate was 51.62% ± 27.40% (Confidence = 1.55) using SDF ≥ 38% applied annually or biannually. In conclusion, when applied to active cavitated caries lesions in primary molars, SDF appears to be effective in arresting dental caries progression, especially if applied biannually.

Accuracy of splint vs splintless technique for virtually planned orthognathic surgery: A voxel-based three-dimensional analysis.

PURPOSE: This study compared two transferring methods for virtually planned orthognathic surgery - the CAD/CAM intermediate splint and the customized surgical guide with fixation plates. METHODS: This was a prospective clinical study in which participants were consecutively recruited and underwent bimaxillary orthognathic surgery. They were divided into two groups based on the transferring method used. The pre- and postoperative CBCTs were aligned using voxel-based landmark-free registration, and the discrepancies for selected points were compared with the planned displacement of the virtually planned surgery. The maxilla and mandible were analyzed separately, and translation and rotation movements were considered. RESULTS: A total of 16 patients, divided into two groups of eight patients each, were included in this study. The splintless group was significantly more accurate for the translation movement along the x-axes for points A (p = 0.008; mean absolute error 0.527 ± 0.387 for the splint group and 0.137 ± 0.067 for the splintless group) and Ans (p = 0.045; mean absolute error 0.535 ± 0.446 for the splint group and 0.156 ± 0.002 for the splintless group). For the mandible there was a significant difference in accuracy along the x-axes for points B (p = 0.049; mean absolute errors 1.728 ± 1.181 and 0.697 ± 0.519 for the splint and splintless groups, respectively), LL3 (p = 0.049; mean absolute error 1.629 ± 0.912 and 0.851 ± 0.797 for the splint and splintless groups, respectively), LR3 (p = 0.049; mean absolute error 1.711 ± 0.906 and 0.844 ± 0.780 for the splint and splintless groups, respectively), with the splintless group being more accurate. For the rotation the splintless group was significantly more accurate along the y-axes (p = 0.04; mean absolute error 1.62 ± 0.78 and 0.49 ± 0.31 for the splint and splintless groups, respectively) and z-axes (p = 0.04; mean absolute error 0.63 ± 0.45 and 0.17 ± 0.05 for the splint and splintless groups, respectively) for the maxilla, while no significant difference was found for the mandible. CONCLUSIONS: Overall, the customized fixation plate system is more accurate than the intermediate CAD/CAM splint for transferring the virtual plan into the operation room.

Cone-beam computed tomography accuracy in pulp chamber size evaluation: An ex vivo study.

This study aimed to assess ex vivo the accuracy of cone-beam computed tomography (CBCT), as compared to operative microscope, for evaluating pulp chamber size. A total of forty teeth were extracted for periodontal reasons and a horizontal section was done at the most apical level of the cement-enamel junction. The pulp chamber was photographed using a digital camera connected to an optical microscope. Then, the tooth was scanned with CBCT and the horizontal slide matching the anatomical section of pulp chamber was digitally stored. The pulp chamber section area was measured through image analysis software. The two methods provided similar results, either for monoradicular (P = 0.14) or multiradicular teeth (P = 0.93). Correlation was statistically significant (P < 0.0001), being the coefficient r = 0.89 and 0.94 for monoradicular and multiradicular teeth, respectively. Conclusively, CBCT is suitable for pulp chamber morphology evaluation. However, it has limitations in detecting the anatomical variability of small branches in root canal system.

Long-term stability of autologous bone graft of intraoral origin after lateral sinus floor elevation with simultaneous implant placement.

BACKGROUND: Lateral approach to maxillary sinus floor elevation (LSFE) with autologous bone grafts and simultaneous implant insertion is a widespread technique for prosthetic rehabilitation of the atrophic maxilla. PURPOSE: To analyze implant survival and autologous bone graft resorption after LSFE, in patients with at least 5 years follow-up. MATERIALS AND METHODS: Thirty-three patients (mean age 56 years, range 46-68 years) who had undergone LSFE with intraoral autologous bone graft from mandibular ramus and simultaneous implant insertion were included. A minimum of 5 years of follow-up was required. The total peri-implant bone height was measured at mesial and distal aspects of the implants immediately after surgery (T0) and after a period ranging from 5 to 11.5 years after surgery (mean 7.65 ± 1.80 years) (T1) on digital panoramic and periapical radiographs. Wilcoxon matched-pairs signed rank test was used to compare bone graft height at T0 and T1. The influence of patient-, surgery-, and implant-related factors on the outcomes was investigated. RESULTS: Of the 58 implants placed, no one was lost. All prostheses were in function, and no biological or mechanical complications occurred. The residual ridge height at the involved sites averaged 6.48 ± 1.72 mm. The mean bone height at grafted regions was 12.05 ± 2.47 mm at T0 and 12.13 ± 2.39 mm at T1 (not statistically significant). Marginal bone level change at T1 averaged -1.22 ± 1.60 mm. None of the evaluated factors significantly affected the results. CONCLUSION: Autologous bone grafts from intraoral donor sites display excellent volume stability over time that may contribute to optimal outcomes of the procedure.

Minimally-invasive dental anesthesia: Patients' preferences and analysis of the willingness-to-pay index.

AIM: The aim of the present prospective study was to evaluate the impact of a computer-controlled anesthesia on patients' comfort and to investigate, through the willingness-to-pay (WTP) index, and patients' acceptance of this new technology. METHODS: Fifty patients undergoing a class I or II restorative procedure were enrolled. A computer-controlled device for anesthetic delivery was utilized, and a questionnaire on the level of discomfort and WTP was given to all patients. RESULTS: A total of 86% of participants declared less discomfort than that perceived during their last traditional procedure for pain control; 58% of patients were willing to pay an additional fee for a modern anesthesia technique, with a median WTP value of 20$. CONCLUSIONS: Computer-controlled systems for local anesthesia represent a relevant tool for reducing patients' discomfort during dental treatment. The WTP index helps to quantify its relevance.

Combined effects of simvastatin and enamel matrix derivative on odontoblastic differentiation of human dental pulp cells.

INTRODUCTION: We previously reported that simvastatin and enamel matrix derivative (EMD) have a dentinogenic effect. However, there is little information about the combined effects of these 2 agents on odontoblastic differentiation. The aim of this study was to investigate the effects of combined treatment with simvastatin and EMD on odontoblastic differentiation of human dental pulp cells (hDPCs). This study further explored the role of extracellular signal-regulated kinase (ERK) as a target and mediator of the differentiation induced by simvastatin in hDPCs. METHODS: The odontoblastic differentiation was analyzed by alkaline phosphatase activity, real-time polymerase chain reaction (PCR) for odontoblastic/osteoblastic markers (ie, dentin sialophosphoprotein, dentin matrix protein 1, and osteonectin), and alizarin red S staining. We also explored the role of ERK signaling as a mediator of simvastatin by Western blotting and real-time PCR. The expression of osteoblast-specific transcription factors was detected by reverse-transcription PCR. RESULTS: The alkaline phosphatase activity and the expression of odontoblastic markers (ie, dentin sialophosphoprotein and dentin matrix protein 1) increased in simvastatin/EMD-treated cells. Mineralized nodule formation increased in EMD- and simvastatin/EMD-treated cells. Notably, the combined use of both simvastatin and EMD resulted in more potent differentiation than that observed after a single therapy. Simvastatin activated ERK phosphorylation and treatment with ERK inhibitor blocked the messenger RNA expression of odontoblastic markers. However, in simvastatin/EMD-treated cells, the expression of these genes did not decrease significantly. Compared with other groups, the EMD- and simvastatin/EMD-treated group showed a greater expression of osterix. CONCLUSIONS: Simvastatin promotes odontoblastic differentiation of hDPCs via the ERK signaling pathway. In addition, simvastatin-induced differentiation is facilitated by co-treatment with EMD. Collectively, these results suggest a new strategy to induce odontoblastic differentiation of hDPCs.

Non-destructive management of white spot lesions by using tooth jewelry.

Although several methods including composite resin restoration and microabrasion have been used for management of white spot lesion, tooth jewelry can be considered as another noninvasive option. This case report describes the management of white spot lesions by using tooth jewelry. This report also highlights the patients' preference for tooth jewelry as an esthetic concern.

Endodontic management of a C-shaped maxillary first molar with three independent buccal root canals by using cone-beam computed tomography.

The aim of this study was to present a method for endodontic management of a maxillary first molar with unusual C-shaped morphology of the buccal root verified by cone-beam computed tomography (CBCT) images. This rare anatomical variation was confirmed using CBCT, and nonsurgical endodontic treatment was performed by meticulous evaluation of the pulpal floor. Posttreatment image revealed 3 independent canals in the buccal root obturated efficiently to the accepted lengths in all 3 canals. Our study describes a unique C-shaped variation of the root canal system in a maxillary first molar, involving the 3 buccal canals. In addition, our study highlights the usefulness of CBCT imaging for accurate diagnosis and management of this unusual canal morphology.