A small scale cell culture system to analyze mechanobiology using reporter gene constructs and polyurethane dishes.

Mechanical forces are translated into biochemical signals and contribute to cell differentiation and phenotype maintenance. Mesenchymal stem cells and their tissue-specific offspring, as osteoblasts and chondrocytes, cells of cardiovascular tissues and lung cells are sensitive to mechanical loading but molecules and mechanisms involved have to be unraveled. It is well established that cellular mechanotransduction is mediated e.g. by activation of the transcription factor SP1 and by kinase signaling cascades resulting in the activation of the AP1 complex. To investigate cellular mechanisms involved in mechanotransduction and to analyze substances, which modulate cellular mechanosensitivity reporter gene constructs, which can be transfected into cells of interest might be helpful. Suitable small-scale bioreactor systems and mechanosensitive reporter gene constructs are lacking. To analyze the molecular mechanisms of mechanotransduction and its crosstalk with biochemically induced signal transduction, AP1 and SP1 luciferase reporter gene constructs were cloned and transfected into various cell lines and primary cells. A newly developed bioreactor and small-scale 24-well polyurethane dishes were used to apply cyclic stretching to the transfected cells. 1 Hz cyclic stretching for 30 min in this system resulted in a significant stimulation of AP1 and SP1 mediated luciferase activity compared to unstimulated cells. In summary we describe a small-scale cell culture/bioreactor system capable of analyzing subcellular crosstalk mechanisms in mechanotransduction, mechanosensitivity of primary cells and of screening the activity of putative mechanosensitizers as new targets, e.g. for the treatment of bone loss caused by both disuse and signal transduction related alterations of mechanotransduction.

Mechanosensitivity of dental pulp stem cells is related to their osteogenic maturity.

For engineering bone tissue, mechanosensitive cells are needed for bone (re)modelling. Local bone mass and architecture are affected by mechanical loading, which provokes a cellular response via loading-induced interstitial fluid flow. We studied whether human dental pulp-derived mesenchymal stem cells (PDSCs) portraying mature (PDSC-mature) or immature (PDSC-immature) bone cell characteristics are responsive to pulsating fluid flow (PFF) in vitro. We also assessed bone formation by PDSCs on hydroxyapatite-tricalcium phosphate granules after subcutaneous implantation in mice. Cultured PDSC-mature exhibited higher osteocalcin and alkaline phosphatase gene expression and activity than PDSC-immature. Pulsating fluid flow (PFF) stimulated nitric oxide production within 5 min by PDSC-mature but not by PDSC-immature. In PDSC-mature, PFF induced prostaglandin E(2) production, and cyclooxygenase 2 gene expression was higher than in PDSC-immature. Implantation of PDSC-mature resulted in more osteoid deposition and lamellar bone formation than PDSC-immature. We conclude that PDSCs with a mature osteogenic phenotype are more responsive to pulsating fluid shear stress than osteogenically immature PDSCs and produce more bone in vivo. These data suggest that PDSCs with a mature osteogenic phenotype might be preferable for bone tissue engineering to restore, for example, maxillofacial defects, because they might be able to perform mature bone cell-specific functions during bone adaptation to mechanical loading in vivo.

Strontium functionalized scaffold for bone tissue engineering.

Drug functionalized scaffolds are currently being employed to improve local delivery of osteoprotective drugs with the aim of reducing their loading dose as well as unwanted systemic complications. In this study we tested a poly-(ε) caprolactone (PCL)-laponite-strontium ranelate (SRA) composite scaffold (PLS3) for its abilities to support growth and osteogenic differentiation of human marrow derived stromal stem cells (hMSC). The in vitro experiments showed the PLS3 scaffold supported cell growth and osteogenic differentiation. The in vivo implantation of hMSC seeded PLS3 scaffold in immunocompromised mice revealed vascularized ectopic bone formation. PLS3 scaffolds can be useful in bone regenerative applications in the fields of orthopaedics and dentistry.

Transit amplifying cells coordinate mouse incisor mesenchymal stem cell activation.

Stem cells (SCs) receive inductive cues from the surrounding microenvironment and cells. Limited molecular evidence has connected tissue-specific mesenchymal stem cells (MSCs) with mesenchymal transit amplifying cells (MTACs). Using mouse incisor as the model, we discover a population of MSCs neibouring to the MTACs and epithelial SCs. With Notch signaling as the key regulator, we disclose molecular proof and lineage tracing evidence showing the distinct MSCs contribute to incisor MTACs and the other mesenchymal cell lineages. MTACs can feedback and regulate the homeostasis and activation of CL-MSCs through Delta-like 1 homolog (Dlk1), which balances MSCs-MTACs number and the lineage differentiation. Dlk1's function on SCs priming and self-renewal depends on its biological forms and its gene expression is under dynamic epigenetic control. Our findings can be validated in clinical samples and applied to accelerate tooth wound healing, providing an intriguing insight of how to direct SCs towards tissue regeneration.

Bioactive nano-fibrous scaffold for vascularized craniofacial bone regeneration.

There has been a growing demand for bone grafts for correction of bone defects in complicated fractures or tumours in the craniofacial region. Soft flexible membrane like material that could be inserted into defect by less invasive approaches; promote osteoconductivity and act as a barrier to soft tissue in growth while promoting bone formation is an attractive option for this region. Electrospinning has recently emerged as one of the most promising techniques for fabrication of extracellular matrix such as nano-fibrous scaffolds that can serve as a template for bone formation. To overcome the limitation of cell penetration of electrospun scaffolds and improve on its osteoconductive nature, in this study, we fabricated a novel electrospun composite scaffold of polyvinyl alcohol (PVA)-poly (ε) caprolactone (PCL)-Hydroxyapatite based bioceramic (HAB), namely, PVA-PCL-HAB. The scaffold prepared by dual electrospinning of PVA and PCL with HAB overcomes reduced cell attachment associated with hydrophobic PCL by combination with a hydrophilic PVA and the HAB can contribute to enhance osteoconductivity. We characterized the physicochemical and biocompatibility properties of the new scaffold material. Our results indicate PVA-PCL-HAB scaffolds support attachment and growth of stromal stem cells; [human bone marrow skeletal (mesenchymal) stem cells and dental pulp stem cells]. In addition, the scaffold supported in vitro osteogenic differentiation and in vivo vascularized bone formation. Thus, PVA-PCL-HAB scaffold is a suitable potential material for therapeutic bone regeneration in dentistry and orthopaedics.

Mesenchymal stem cell ingrowth and differentiation on coralline hydroxyapatite scaffolds.

Culture of osteogenic cells on a porous scaffold could offer a new solution to bone grafting using autologous human mesenchymal stem cells (hMSC) from the patient. We compared coralline hydroxyapatite scaffolds with pore sizes of 200 and 500 microm for expansion and differentiation of hMSCs. We cultivated the hMSC statically or in spinner flasks for 1, 7, 14 and 21 days and found that the 200-microm pore scaffolds exhibited a faster rate of osteogenic differentiation than did the 500-microm pore scaffolds as shown by an alkaline phosphatase activity assay and real-time reverse transcriptase polymerase chain reaction for 10 osteogenic markers. The 500-microm scaffolds had increased proliferation rates and accommodated a higher number of cells (shown by DNA content, scanning electron microscopy and fluorescence microscopy). Thus the porosity of a 3D microporous biomaterial may be used to steer hMSC in a particular direction. We found that dynamic spinner flask cultivation of hMSC/scaffold constructs resulted in increased proliferation, differentiation and distribution of cells in scaffolds. Therefore, spinner flask cultivation is an easy-to-use inexpensive system for cultivating hMSCs on small to intermediate size 3D scaffolds.

Simple additive manufacturing of an osteoconductive ceramic using suspension melt extrusion.

OBJECTIVE: Craniofacial bone trauma is a leading reason for surgery at most hospitals. Large pieces of destroyed or resected bone are often replaced with non-resorbable and stock implants, and these are associated with a variety of problems. This paper explores the use of a novel fatty acid/calcium phosphate suspension melt for simple additive manufacturing of ceramic tricalcium phosphate implants. METHODS: A wide variety of non-aqueous liquids were tested to determine the formulation of a storable 3D printable tricalcium phosphate suspension ink, and only fatty acid-based inks were found to work. A heated stearic acid-tricalcium phosphate suspension melt was then 3D printed, carbonized and sintered, yielding implants with controllable macroporosities. Their microstructure, compressive strength and chemical purity were analyzed with electron microscopy, mechanical testing and Raman spectroscopy, respectively. Mesenchymal stem cell culture was used to assess their osteoconductivity as defined by collagen deposition, alkaline phosphatase secretion and de-novo mineralization. RESULTS: After a rapid sintering process, the implants retained their pre-sintering shape with open pores. They possessed clinically relevant mechanical strength and were chemically pure. They supported adhesion of mesenchymal stem cells, and these were able to deposit collagen onto the implants, secrete alkaline phosphatase and further mineralize the ceramic. SIGNIFICANCE: The tricalcium phosphate/fatty acid ink described here and its 3D printing may be sufficiently simple and effective to enable rapid, on-demand and in-hospital fabrication of individualized ceramic implants that allow clinicians to use them for treatment of bone trauma.

Inefficiency in macromolecular transport of SCS-based microcapsules affects viability of primary human mesenchymal stem cells but not of immortalized cells.

Microcapsules made of sodium cellulose sulphate (SCS) and poly-diallyl-dimethyl-ammonium chloride (pDADMAC) have been employed to encapsulate a wide range of established cell lines for several applications. However, little is known about the encapsulation of primary cells including human mesenchymal stem cells (hMSCs). Human MSCs are of interest in regenerative medicine applications due to pro-angiogenic, anti-inflammatory and immunomodulatory properties, which result from paracrine effects of this cell type. In the present work we have encapsulated primary hMSCs and hMSC-TERT immortalized cells and compared their behavior and in vitro angiogenic potential. We found that, although both cell types were able to secret angiogenic factors such as VEGF, there was a marked reduction of primary hMSC viability compared to hMSC-TERT cells when cultured in these microcapsules. Moreover, this applied to other primary cell cultures such as primary human fibroblasts but not to other cell lines such as human embryonic kidney 293 (HEK293) cells. We found that the microcapsule membrane had a molecular weight cut-off below a critical size, which caused impairment in the diffusion of essential nutrients and had a more detrimental effect on the viability of primary cell cultures compared to cell lines and immortalized cells.

Involvement of the MEN1 gene locus in familial isolated hyperparathyroidism.

BACKGROUND: Familial isolated hyperparathyroidism (FIHP) is a hereditary disorder characterised by uni- or multiglandular parathyroid disease. A subset of families are likely to be genetic variants of other familial tumour syndromes in which PHPT is the main feature, for example multiple endocrine neoplasia type 1 (MEN 1) and the hyperparathyroidism-jaw tumour syndrome (HPT-JT). OBJECTIVE: To investigate seven families diagnosed with FIHP, each with two to eight affected family members, to clarify the underlying genetic mechanism. METHODS: The entire MEN1 gene was sequenced for germline mutations and, in addition, tumour specimens were analysed in comparative genomic hybridisation and loss of heterozygosity studies. RESULTS: Two families exhibited MEN1 mutations, L112V and 1658delG, which were associated with loss of the wild-type 11q13 alleles in all tumours analysed. In the remaining five families, no MEN1 mutation was identified. CONCLUSION: These results support the involvement of the MEN1 tumour suppressor gene in the pathogenesis of some of the FIHP kindreds. However, loss on chromosome 11 was seen in all tumours exhibiting somatic deletions, although in two families the tumour deletions involved 11q distal to MEN1. We conclude that the altered MEN1 gene function is of importance in the development of FIHP.

Surface-modified functionalized polycaprolactone scaffolds for bone repair: in vitro and in vivo experiments.

A porcine calvaria defect study was carried out to investigate the bone repair potential of three-dimensional (3D)-printed poly-ε-caprolactone (PCL) scaffolds embedded with nanoporous PCL. A microscopic grid network was created by rapid prototyping making a 3D-fused deposition model (FDM-PCL). Afterward, the FDM-PCL scaffolds were infused with a mixture of PCL, water, and 1,4-dioxane and underwent a thermal-induced phase separation (TIPS) followed by lyophilization. The TIPS process lead to a nanoporous structure shielded by the printed microstructure (NSP-PCL). Sixteen Landrace pigs were divided into two groups with 8 and 12 weeks follow-up, respectively. A total of six nonpenetrating holes were drilled in the calvaria of each animal. The size of the cylindrical defects was h 10 mm and Ø 10 mm. The defects were distributed randomly using following groups: (a) NSP-PCL scaffold, (b) FDM-PCL scaffold, (c) autograft, (d) empty defect, (a1) NSP-PCL scaffold + autologous mononuclear cells, and (a2) NSP-PCL scaffold + bone morphogenetic protein 2. Bone volume to total volume was analyzed using microcomputed tomography (µCT) and histomorphometry. The µCT and histological data showed significantly less bone formation in the NSP-PCL scaffolds in all three variations after both 8 and 12 weeks compared to all other groups. The positive autograft control had significantly higher new bone formation compared to all other groups except the FDM-PCL when analyzed using histomorphometry. The NSP-PCL scaffolds were heavily infiltrated with foreign body giant cells suggesting an inflammatory response and perhaps active resorption of the scaffold material. The unmodified FDM-PCL scaffold showed good osteoconductivity and osseointegration after both 8 and 12 weeks.

Fabrication and characterization of a rapid prototyped tissue engineering scaffold with embedded multicomponent matrix for controlled drug release.

Bone tissue engineering implants with sustained local drug delivery provide an opportunity for better postoperative care for bone tumor patients because these implants offer sustained drug release at the tumor site and reduce systemic side effects. A rapid prototyped macroporous polycaprolactone scaffold was embedded with a porous matrix composed of chitosan, nanoclay, and ß-tricalcium phosphate by freeze-drying. This composite scaffold was evaluated on its ability to deliver an anthracycline antibiotic and to promote formation of mineralized matrix in vitro. Scanning electronic microscopy, confocal imaging, and DNA quantification confirmed that immortalized human bone marrow-derived mesenchymal stem cells (hMSC-TERT) cultured in the scaffold showed high cell viability and growth, and good cell infiltration to the pores of the scaffold. Alkaline phosphatase activity and osteocalcin staining showed that the scaffold was osteoinductive. The drug-release kinetics was investigated by loading doxorubicin into the scaffold. The scaffolds comprising nanoclay released up to 45% of the drug for up to 2 months, while the scaffold without nanoclay released 95% of the drug within 4 days. Therefore, this scaffold can fulfill the requirements for both bone tissue engineering and local sustained release of an anticancer drug in vitro. These results suggest that the scaffold can be used clinically in reconstructive surgery after bone tumor resection. Moreover, by changing the composition and amount of individual components, the scaffold can find application in other tissue engineering areas that need local sustained release of drug.

Self-assembled composite matrix in a hierarchical 3-D scaffold for bone tissue engineering.

It is of high clinical relevance in bone tissue engineering that scaffolds promote a high seeding efficiency of cells capable of osteogenic differentiation, such as human bone marrow-derived mesenchymal stem cells (hMSCs). We evaluated the effects of a novel polycaprolactone (PCL) scaffold on hMSC seeding efficiency, proliferation, distribution and differentiation. Porous PCL meshes prepared by fused deposition modeling (FDM) were embedded in matrix of hyaluronic acid, methylated collagen and terpolymer via polyelectrolyte complex coacervation. Scaffolds were cultured statically and dynamically in osteogenic stimulation medium for up to 28 days. Compared to naked PCL scaffolds, embedded scaffolds provided a higher cell seeding efficiency (t-test, P<0.05), a more homogeneous cell distribution and more osteogenically differentiated cells, verified by a more pronounced gene expression of the bone markers alkaline phosphatase, osteocalcin, bone sialoprotein I and bone sialoprotein II. Dynamic culture resulted in higher amounts of DNA (day 14 and day 21) and calcium (day 21 and day 28), compared to static culture. Dynamic culture and the embedding synergistically enhanced the calcium deposition of hMSC on day 21 and day 28. This in vitro study provides evidence that hybrid scaffolds made from natural and synthetic polymers improve cellular seeding efficiency, proliferation, distribution and osteogenic differentiation.

Interaction of human mesenchymal stem cells with osteopontin coated hydroxyapatite surfaces.

In vitro studies of the initial attachment, spreading and motility of human bone mesenchymal stem cells have been carried out on bovine osteopontin (OPN) coated hydroxyapatite (HA) and gold (Au) model surfaces. The adsorption of OPN extracted from bovine milk was monitored by the quartz crystal microbalance with dissipation (QCM-D) and the ellipsometry techniques, and the OPN coated surfaces were further investigated by antigen-antibody interaction. It is shown that the OPN surface mass density is significantly lower and that the number of antibodies binding to the resulting OPN layers is significantly higher on the HA as compared to the Au surfaces. The initial attachment, spreading and motility of human mesenchymal stem cells show a larger cell area, a faster arrangement of vinculin in the basal cell membrane and more motile cells on the OPN coated HA surfaces as compared to the OPN coated Au surfaces and to the uncoated Au and HA surfaces. These in vitro results indicate that there may be great potential for OPN coated biomaterials, for instance as functional protein coatings or drug delivery systems on orthopaedic implants or scaffolds for tissue-engineering.

Effect of dynamic 3-D culture on proliferation, distribution, and osteogenic differentiation of human mesenchymal stem cells.

Ex vivo engineering of autologous bone tissue as an alternative to bone grafting is a major clinical need. In the present study, we evaluated the effect of 3-D dynamic spinner flask culture on the proliferation, distribution, and differentiation of human mesenchymal stem cells (MSCs). Immortalized human MSCs were cultured on porous 75:25 PLGA scaffolds for up to 3 weeks. Dynamically cultured cell/scaffold constructs demonstrated a 20% increase in DNA content (21 days), enhanced ALP specific activity (7 days and 21 days), a more than tenfold higher Ca2+ content (21 days), and significantly increased transcript levels of early osteogenesis markers (e.g., COL1A1, BMP2, RUNX-2) as compared with static culture. Despite the formation of a dense superficial cell layer, markedly increased cell ingrowth was observed by fluorescence microscopy on day 21. Furthermore, increased extracellular matrix deposition was visualized by scanning electron microscopy after 1 and 3 weeks of dynamic culture. The observed increased ingrowth and osteogenic differentiation of 3-D dynamically cultured human MSCs can be explained by generation of fluid shear stress and enhanced mass transport to the interior of the scaffold mimicking the native microenvironment of bone cells. This study provides evidence for the effectiveness of dynamic culture of human MSCs during the initial phase of ex vivo osteogenesis.

Morphology, proliferation, and osteogenic differentiation of mesenchymal stem cells cultured on titanium, tantalum, and chromium surfaces.

Metallic implants are widely used in orthopedic surgery and dentistry. Durable osseous fixation of an implant requires that osteoprogenitor cells attach and adhere to the implant, proliferate, differentiate into osteoblasts, and produce mineralized matrix. In the present study, we investigated the interactions between human mesenchymal stem cells (MSCs) and smooth surfaces of titanium (Ti), tantalum (Ta), and chromium (Cr). Mean cellular area was quantified using fluorescence microscopy (4 h). Cellular proliferation was assessed by (3)H-thymidine incorporation and methylene blue cell counting assays (4 days). Osteogenic differentiation response was quantified by cell-specific alkaline phosphatase activity (ALP) assay (4 days), expression analysis of bone-related genes (4 days), and mineralization assay (21 days). Undifferentiated and osteogenically stimulated MSCs cultured on the different surfaces showed the same tendencies for proliferation and differentiation. MSCs exposed to Ti surfaces demonstrated enhanced proliferation compared with Ta and Cr surfaces. Cultivation of MSCs on Ta surfaces resulted in significantly increased mean cellular area and cell-specific ALP activity compared with the other surfaces tested. Cells cultured on Cr demonstrated reduced spreading and proliferation. In conclusion, Ta metal, as an alternative for Ti, can be considered as a promising biocompatible material, whereas further studies are needed to fully understand the role of Cr and its alloys in bone implants.

Fast and simple online sample preparation coupled with capillary LC-MS/MS for determination of prostaglandins in cell culture supernatants.

An online 2-D strong cation exchange (SCX)-RP capillary liquid chromatographic (cLC) method with IT mass spectrometric (IT-MS/MS) detection for the simultaneous determination of prostaglandin (PG) A(1), PGD(2), PGE(1), PGE(2), PGF(2a), 6-keto-(6k)PGF(1a), and 15-Delta(12,14)-deoxy-PGJ(2) (15dPGJ(2)) in cell culture supernatants was developed and validated. Pretreatment of the cell culture supernatants included dilution and filtration, and the analysis time including all sample preparation steps was less than 50 min per sample. Peptides/proteins contained in the matrix were removed by the SCX column. LODs in the range of 0.4-2.2 ng/mL cell culture supernatant, recoveries higher than 80% and within- and between-day precisions of less than 30% RSDs were obtained. Human mesenchymal stem cells (hMSCs) were stimulated with cytokine-containing supernatants derived from activated T lymphocytes, and PG production was analyzed using the developed method. PGE(2 )was found in cultures from both untreated and stimulated hMSCs, while PGE(1) was present above the detection limit only in stimulated cells.