Evaluation of Human Osteoblasts on NIPS Micro-Patterned PCL Carriers Containing Nanohydroxyapatite and Reduced Graphene Oxide Using PSµM.

The content and surface topology of tissue engineering scaffolds are two important parameters in regulating the cell behavior. In this study, a phase separation micromolding (PSµM) method was implemented to develop micro-groove-imprinted poly(ε-caprolactone) (PCL)-nano hydroxyapatite (nHAp)-reduced graphene oxide (rGO) ternary blend constructs. Physical and chemical characterizations of cell-devoid constructs were performed by FTIR, XRD, TGA, DSC, porosity, swelling, wettability analysis, tensile and compression mechanical tests. The in vitro biological performance of human osteoblasts cultured on micro-patterned blend constructs was evaluated by MTT and alamarBlue viability assays. The findings revealed that nHAp and rGO significantly promote cell viability and proliferation, while the micro-pattern determines the direction of cell migration. Alkaline phosphatase and Ca2+ analyses were carried out to determine the osteogenic properties of cell-laden constructs. This study describes a simple method to generate topologically modified ternary blend PCL/nHAp/rGO constructs using the PSµM method, which contributes to cell proliferation and migration, which is particularly important in regenerative medicine.

Fabrication and Evaluation of Gellan Gum/Hyaluronic Acid Hydrogel for Retinal Tissue Engineering Biomaterial and the Influence of Substrate Stress Relaxation on Retinal Pigment Epithelial Cells.

Cell therapies for age-related macular degeneration (AMD) treatment have been developed by integrating hydrogel-based biomaterials. Until now, cell activity has been observed only in terms of the modulus of the hydrogel. In addition, cell behavior has only been observed in the 2D environment of the hydrogel and the 3D matrix. As time-dependent stress relaxation is considered a significant mechanical cue for the control of cellular activities, it is important to optimize hydrogels for retinal tissue engineering (TE) by applying this viewpoint. Herein, a gellan Gum (GG)/Hyaluronic acid (HA) hydrogel was fabricated using a facile physical crosslinking method. The physicochemical and mechanical properties were controlled by forming a different composition of GG and HA. The characterization was performed by conducting a mass swelling study, a sol fraction study, a weight loss test, a viscosity test, an injection force study, a compression test, and a stress relaxation analysis. The biological activity of the cells encapsulated in 3D constructs was evaluated by conducting a morphological study, a proliferation test, a live/dead analysis, histology, immunofluorescence staining, and a gene expression study to determine the most appropriate material for retinal TE biomaterial. Hydrogels with moderate amounts of HA showed improved physicochemical and mechanical properties suitable for injection into the retina. Moreover, the time-dependent stress relaxation property of the GG/HA hydrogel was enhanced when the appropriate amount of HA was loaded. In addition, the cellular compatibility of the GG/HA hydrogel in in vitro experiments was significantly improved in the fast-relaxing hydrogel. Overall, these results demonstrate the remarkable potential of GG/HA hydrogel as an injectable hydrogel for retinal TE and the importance of the stress relaxation property when designing retinal TE hydrogels. Therefore, we believe that GG/HA hydrogel is a prospective candidate for retinal TE biomaterial.

Natural Sources and Applications of Demineralized Bone Matrix in the Field of Bone and Cartilage Tissue Engineering.

Demineralized bone matrix (DBM) is one of the most widely used materials for bone repair. Recently, different strategies in tissue engineering have been used to improve preparation of biomaterials from natural sources suitable for the use in bone regeneration. However, the application of DBM in tissue engineering is still a challenge, because the mechanical properties which are essential to bear tensile and load and the risk of transmission of disease by donor are still a matter of homework. A solution to this problem is to blend natural and synthetic polymers to complement defects and make them ideal biomaterials. An ideal biomaterial improves survival, adhesion, proliferation, induction, and differentiation of cells in the biomaterial after in vivo transplantation. In this review, we will look at the study of DBM made of natural and synthetic materials giving a direction for future research.

Bone Regeneration Using Duck's Feet-Derived Collagen Scaffold as an Alternative Collagen Source.

Collagen is an important component that makes 25-35% of our body proteins. Over the past decades, tissue engineers have been designing collagen-based biocompatible materials and studying their applications in different fields. Collagen obtained from cattle and pigs has been mainly used until now, but collagen derived from fish and other livestock has attracted more attention since the outbreak of mad cow disease, and they are also used as a raw material for cosmetics and foods. Due to the zoonotic infection using collagen derived from pigs and cattle, their application in developing biomaterials is limited; hence, the development of new animal-derived collagen is required. In addition, there is a religion (Islam, Hinduism, and Judaism) limited to export raw materials and products derived from cattle and pig. Hence, high-value collagen that is universally accessible in the world market is required. Therefore, in this review, we have dealt with the use of duck's feet-derived collagen (DC) as an emerging alternative to solve this problem and also presenting few original investigated bone regeneration results performed using DC.

Hydrogen peroxide-activatable polymeric prodrug of curcumin for ultrasound imaging and therapy of acute liver failure.

Curcumin is a major active phenolic component of turmeric and has gained great attention in pharmaceutics due to its potent antioxidant, anti-inflammatory and anticancer activity. Here, we developed poly(oxalate-co-curcumin) (POC) as a hydrogen peroxide (H2O2)-activatable polymeric prodrug of curcumin by incorporating curcumin in the backbone of H2O2-responsive polyoxalate. POC particles effectively scavenged H2O2 and released curcumin in a H2O2-triggered manner. POC particles exhibited excellent antioxidant and anti-inflammatory activity in activated cells. POC particles intravenously administrated into acetaminophen-intoxicated mice remarkably suppressed the level of alanine transaminase and inhibited apoptotic cell death in liver. Interestingly, POC particles could also enhance the ultrasound contrast in the intoxicated liver due to CO2 bubble generation through H2O2-triggered oxidation of peroxalate esters. Given their H2O2-responsiveness and highly potent antioxidant activity, POC particles hold great translational potential as theranostic agents for H2O2-associated diseases.

Biological Role of Gellan Gum in Improving Scaffold Drug Delivery, Cell Adhesion Properties for Tissue Engineering Applications.

Over the past few decades, gellan gum (GG) has attracted substantial research interest in several fields including biomedical and clinical applications. The GG has highly versatile properties like easy bio-fabrication, tunable mechanical, cell adhesion, biocompatibility, biodegradability, drug delivery, and is easy to functionalize. These properties have put forth GG as a promising material in tissue engineering and regenerative medicine fields. Nevertheless, GG alone has poor mechanical strength, stability, and a high gelling temperature in physiological conditions. However, GG physiochemical properties can be enhanced by blending them with other polymers like chitosan, agar, sodium alginate, starch, cellulose, pullulan, polyvinyl chloride, xanthan gum, and other nanomaterials, like gold, silver, or composites. In this review article, we discuss the comprehensive overview and different strategies for the preparation of GG based biomaterial, hydrogels, and scaffolds for drug delivery, wound healing, antimicrobial activity, and cell adhesion. In addition, we have given special attention to tissue engineering applications of GG, which can be combined with another natural, synthetic polymers and nanoparticles, and other composites materials. Overall, this review article clearly presents a summary of the recent advances in research studies on GG for different biomedical applications.

Reactive Oxygen Species Responsive Naturally Occurring Phenolic-Based Polymeric Prodrug.

Reactive Oxygen Species (ROS) play a vital role in the biological system. Exaggerated, ROS have devastating effects on the human body leading to the pathophysiological condition including the transformation of a normal cell into a cancer phenotype. Nature has blessed us with various biomolecules that we use along with our dietary supplements. Using such therapeutic small molecules covalently incorporated into biodegradable polyoxalate polymer backbone with a responsive group forms an efficient drug delivery vehicle. This chapter "Reactive oxygen species responsive naturally occurring phenolic-based polymeric prodrug" will be focusing on redox-responsive polymers incorporated with naturally occurring phenolics and clinical application.

Silk Fibroin-Based Scaffold for Bone Tissue Engineering.

Regeneration of diseased or damaged skeletal tissues is one of the challenge that needs to be solved. Although there have been many bone tissue engineering developed, scaffold-based tissue engineering complement the conventional treatment for large bone by completing biological and functional environment. Among many materials, silk fibroin (SF) is one of the favorable material for applications in bone tissue engineering scaffolding. SF is a fibrous protein mainly extracted from Bombyx mori. and spiders. SF has been used as a biomaterial for bone graft by its unique mechanical properties, controllable biodegradation rate and high biocompatibility. Moreover, SF can be processed using conventional and advanced biofabrication methods to form various scaffold types such as sponges, mats, hydrogels and films. This review discusses about recent application and advancement of SF as a biomaterial.

Inflammation-responsive antioxidant nanoparticles based on a polymeric prodrug of vanillin.

Oxidative stress is induced by accumulation of hydrogen peroxide (H2O2), and therefore, H2O2 could serve as a potential biomarker of various oxidative stress-associated inflammatory diseases. Vanillin is one of the major components of natural vanilla and has potent antioxidant and anti-inflammatory activities. In this work, we developed a novel inflammation-responsive antioxidant polymeric prodrug of vanillin, termed poly(vanillin oxalate) (PVO). In design, PVO incorporates H2O2-reacting peroxalate ester bonds and bioactive vanillin via acid-responsive acetal linkages in its backbone. Therefore, in cells undergoing damages by oxidative stress, PVO readily degrades into three nontoxic components, one of which is antioxidant and anti-inflammatory vanillin. PVO nanoparticles exhibit potent antioxidant activities by scavenging H2O2 and inhibiting the generation of ROS (reactive oxygen species) and also reduce the expression of pro-inflammatory cytokines in activated macrophages in vitro and in vivo. We, therefore, anticipate that PVO nanoparticles have great potential as novel antioxidant therapeutics and drug delivery systems for ROS-associated inflammatory diseases.

Accelerating bone regeneration using poly(lactic-co-glycolic acid)/hydroxyapatite scaffolds containing duck feet-derived collagen.

Collagen, with low antigenicity and excellent cell adhesion, is a biomaterial mainly used for regenerating bone, cartilage, and skin, owing to its biocompatibility and biodegradability. Results from a previous study confirmed that a scaffold mixed with duck feet-derived collagen (DC) and Poly(lactic-co-glycolic acid) (PLGA) reduced inflammatory reaction and increased bone regeneration. To develop an optimal bone substitute we included hydroxyapatite (HAp), a key osteoconductive material, in a DC and PLGA mixture. We fabricated 0, 10, 20, 40, 60, and 80 wt% DC/PLGA/HAp scaffolds and studied their potential for bone tissue engineering. Characteristic analysis of the scaffold and seeding of rabbit bone marrow mesenchymal stem cells (rBMSCs) on the scaffold were conducted to investigate cell proliferation, osteogenic differentiation, and bone formation. We confirmed that increasing DC concentration not only improved the compressive strength of the DC/PLGA/HAp scaffold but also cell proliferation and osteogenic differentiation. It was found through comparison with previous studies that including HAp in the scaffold also promotes osteogenic differentiation. Our study thus shows through in vivo results that the 80 wt% DC/PLGA/HAp scaffold promotes bone mineralization and collagen deposition while reducing the inflammatory response. Hence, 80 wt% DC/PLGA/HAp has excellent potential as a biomaterial for bone regeneration applications.

Neurogenesis of bone marrow-derived mesenchymal stem cells onto ß-mercaptoethanol-loaded PLGA film.

Bone marrow-derived mesenchymal stem cells (BMSCs) are of particular interest in the field of tissue engineering because of their potential to differentiate into osteoblasts, chondrocytes, and neuronal cells. In order to promote the differentiation of BMSCs into specific cell types, appropriate scaffold biomaterials and bioactive molecules that can support the differentiation of BMSCs into specific cell types are needed. We hypothesized that ß-mercaptoethanol (BME), which has been reported to induce the differentiation of BMSCs into neural-like cells, promotes BMSCs to differentiate into neural-like cells when BME is added to polymeric scaffolds containing the BMSCs. We fabricated biocompatible film shaped scaffolds composed of poly(lacti-co-glycolic) acid (PLGA) and various concentrations of BME to confirm that BME-promoted differentiation of BMSCs is concentration-dependent. Cell proliferation increased as the BME concentration in the films increased at the early stage, and the proliferation rate remained similar on the PLGA films for 3 weeks following the BMSC seeding. The expression of neuronal markers in differentiated BMSCs was assessed by RT-PCR. At 2- and 3-week time-points, mRNA expression of neurofilament and neuron specific enolase was significantly increased in PLGA/BME films containing 400 µM BME compared to PLGA films. Thus, we have identified BMSC-seeded PLGA/BME films with 200 µM and 400 µM BME as potentially useful candidates for neural tissue engineering applications by promoting BMSC proliferation and differentiation towards neural-like cells.

Biomimetic sponge using duck's feet derived collagen and hydroxyapatite to promote bone regeneration.

Collagen, a natural biomaterial derived from animal tissues, has attracted the attention of biomedical material researchers because of its excellent cell affinity and low rejection in vivo. In this study, collagen was extracted using livestock by-product flippers, and an experiment was performed to assess its application as a scaffold for bone tissue implantation. For this purpose, we fabricated 2%, and 3% duck's feet derived collagen (DC) sponges. We then compared them to hydroxyapatite (HAp)-coated DC sponges, and measured the porosity and pore size using scanning electron microscopy (SEM) to analyze the physical properties and morphology of DC and DC/HAp sponges. 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay were carried out to measure the proliferation of bone marrow stem cells (BMSCs) in DC and DC/HAp sponges. An alkaline phosphatase activity assay confirmed the osteogenic differentiation ability of BMSCs. Polymerase chain reaction (PCR) was performed to confirm the BMSC-specific genetic marker. The osteogenic potential was confirmed by the bone formation in an in vivo environment on the scaffold by histological and immunohistochemical analysis. Overall, this study shows that DC/HAp sponges have biocompatibility and good physical properties. Additionally, DC/HAp sponges show potential use as bone graft materials for tissue engineering applications.

Macro- and microporous polycaprolactone/duck's feet collagen scaffold fabricated by combining facile phase separation and particulate leaching techniques to enhance osteogenesis for bone tissue engineering.

Herein, a facile macro- and microporous polycaprolactone/duck's feet collagen scaffold (PCL/DC) was fabricated and characterized to confirm its applicability in bone tissue engineering. A biomimetic scaffold for bone tissue engineering and regeneration for bone defects is an important element. PCL is a widely applied biomaterial for bone tissue engineering due to its biocompatibility and biodegradability. However, the high hydrophobicity and low cell attachment site properties of PCL lead to an insufficient microenvironment in designing a scaffold. Collagen is a nature-derived biomaterial that is widely used in tissue engineering and has excellent biocompatibility, mechanical properties, and cell attachment moieties. Among the resources from which collagen can be obtained, DC contains a high amount of collagen type I (COL1), is biocompatible, and is cost-effective. In this study, the scaffolds were fabricated by blending DC with PCL in various ratios and applied non-solvent-induced phase separation (NIPS) and thermal-induced phase separation (TIPS) (N-TIPS), solvent casting and particulate leaching (SCPL), and gas foaming method to fabricate macro- and microporous structure. The characterization of the fabricated scaffolds was carried out by morphological analysis, bioactivity test, physicochemical analysis, and mechanical test. In vitro study was carried out by viability test, morphology observation, and gene expression. The results showed that the incorporation of DC enhances the physicochemical and mechanical properties of the scaffolds. Also, a large amount of bone mimetic apatite was formed according to the DC content in the bioactivity test. The in vitro study showed that the PCL/DC scaffold is biocompatible and the existence of apatite and DC formed a favorable microenvironment for cell proliferation and differentiation. Overall, the novel porous PCL/DC scaffold can be a promising biomaterial model for bone tissue engineering and regeneration.

Dopamine-Functionalized Gellan Gum Hydrogel as a Candidate Biomaterial for a Retinal Pigment Epithelium Cell Delivery System.

In this study, dopamine-functionalized gellan gum (DFG) hydrogel was prepared as a carrier for retinal pigment epithelium (RPE) cell delivery via a carbodiimide reaction. The carboxylic acid of gellan gum (GG) was replaced with catechol in a 21.3% yield, which was confirmed by NMR. Sol fraction and weight loss measurements revealed that dopamine improved degradability in the GG hydrogel. Measurements of the viscosity, injection force, and compressibility also showed that dopamine-functionalized GG hydrogels had more desirable rheological/mechanical properties for improving injectability. These characteristics were confirmed to arise from the GG's helix structure loosened by the dopamine's bulky nature. Moreover, dopamine's hydrophilic characteristics were confirmed to create a more favorable microenvironment for cell growth by promoting swelling capability and cell attachment. This improved biocompatibility became more pronounced when the hydrophilicity of dopamine was combined with a larger specific surface area stemming from the less porous structure of the dopamine-grafted hydrogels. This effect was apparent from the live/dead staining images of the as-prepared hydrogels. Meanwhile, the nonionic cross-linked DFG (DG) hydrogel showed the lowest protein expression in the immunofluorescence staining images obtained after 28 days of culture, supporting that it had the highest degradability and associated cell-releasing ability. That tendency was also observed in the gene expression data acquired by real-time polymerase chain reaction (RT-PCR) analysis. RT-PCR analysis also revealed that the DG hydrogel carrier could upregulate the visual function-related gene of RPE. Overall, the DG hydrogel system demonstrated its feasibility as a carrier of RPE cells and its potential as a means of improving visual function.

Preparation and evaluation of gellan gum hydrogel reinforced with silk fibers with enhanced mechanical and biological properties for cartilage tissue engineering.

Various research about cartilage regeneration using biomaterials has been done recently. Particularly, gellan gum hydrogel (GG) is reported to be suitable as a biomaterial for cartilage tissue engineering (TE) for its water uptaking ability, producibility, and environmental resemblance of native cartilage. Despite these advantages, mechanical and cell adhesion properties are still difficult to modulate. Reinforcement is essential to overcome these problems. Herein, GG was modified by physically blending with different lengths of silk fiber (SF). As SF is expected to improve such disadvantages of GG, mechanical and biological properties were characterized to confirm its reinforcement ability. Mechanical properties such as degradation rate, swelling rate, compression strength, and viscosity were studied and it was confirmed that SF significantly reinforces the mechanical properties of GG. Furthermore, in vitro study was carried out to confirm morphology, biocompatibility, proliferation, and chondrogenesis of chondrocytes encapsulated in the hydrogels. Overall, chondrocytes in the GG blended with SF (SF/GG) showed enhanced cell viability and growth. According to this study, SF/GG can be a promising biomaterial for cartilage TE biomaterial.

Development and Evaluation of Gellan Gum/Silk Fibroin/Chondroitin Sulfate Ternary Injectable Hydrogel for Cartilage Tissue Engineering.

Hydrogel is in the spotlight as a useful biomaterial in the field of drug delivery and tissue engineering due to its similar biological properties to a native extracellular matrix (ECM). Herein, we proposed a ternary hydrogel of gellan gum (GG), silk fibroin (SF), and chondroitin sulfate (CS) as a biomaterial for cartilage tissue engineering. The hydrogels were fabricated with a facile combination of the physical and chemical crosslinking method. The purpose of this study was to find the proper content of SF and GG for the ternary matrix and confirm the applicability of the hydrogel in vitro and in vivo. The chemical and mechanical properties were measured to confirm the suitability of the hydrogel for cartilage tissue engineering. The biocompatibility of the hydrogels was investigated by analyzing the cell morphology, adhesion, proliferation, migration, and growth of articular chondrocytes-laden hydrogels. The results showed that the higher proportion of GG enhanced the mechanical properties of the hydrogel but the groups with over 0.75% of GG exhibited gelling temperatures over 40 °C, which was a harsh condition for cell encapsulation. The 0.3% GG/3.7% SF/CS and 0.5% GG/3.5% SF/CS hydrogels were chosen for the in vitro study. The cells that were encapsulated in the hydrogels did not show any abnormalities and exhibited low cytotoxicity. The biochemical properties and gene expression of the encapsulated cells exhibited positive cell growth and expression of cartilage-specific ECM and genes in the 0.5% GG/3.5% SF/CS hydrogel. Overall, the study of the GG/SF/CS ternary hydrogel with an appropriate content showed that the combination of GG, SF, and CS can synergistically promote articular cartilage defect repair and has considerable potential for application as a biomaterial in cartilage tissue engineering.

Theranostic potential of biodegradable polymeric nanoparticles with paclitaxel and curcumin against breast carcinoma.

In this study, integrin-mediated targeting and near-infrared fluorescence (NIRF) traceable polyethylene glycol-b-poly(lactic-co-glycolic acid) (PEG-PLGA)-based polymeric nanoparticles (NPs) were prepared to investigate the effects of paclitaxel (PTX) and curcumin (CUR) combination therapy on breast cancer. Cyclic (arginine-glycine-aspartic acid-phenylalanine-lysine) (cRGDfK) was selected as a ligand for breast cancer and conjugated to the end of NPs (cRGDfK-NPs). For fluorescence imaging, sulfo-cyanine 5.5 (Cy5.5) was incorporated into NPs (Cy5.5-NPs). A series of hybrid NPs consisting of NPs, cRGDfK-NPs, and Cy5.5-NPs with drugs encapsulated inside the core (Cy5.5-cRGDfK-NPs/PTX + CUR) were prepared by self-assembly. The efficacy of PTX and CUR combination and the ability of the integrin-mediated targeting of NPs were systemically investigated using a 4T1 mouse breast cancer cell line and a nude mouse xenograft model. We suggested that Cy5.5-cRGDfK-NPs/PTX + CUR has superior theranostic potential against breast carcinoma.

Comparative Study on the Effect of the Different Harvesting Sources of Demineralized Bone Particles on the Bone Regeneration of a Composite Gellan Gum Scaffold for Bone Tissue Engineering Applications.

Bone is the rigid tissue that constitutes the skeleton. The material for bone regeneration has to provide the mechanical stability by maintaining the mechanical loads both in the rest conditions and during the body movements. Bone is dynamic tissue constantly reshaped by the action of cells (osteoblasts and osteoclasts). This activity is normally enough to heal bone injuries; however, in several conditions, when bone is subjected to fatal damages, self-renewal is difficult, if not even impossible, and a medical treatment is required. The transplantation of a biomaterial is one of the common surgical procedures to overcome critical injuries. In this study, we exploited the effect of the use of different sources of demineralized bone powder (DBP) in combination with gellan gum (GG) to form a GG-DBP hydrogel scaffold with the purpose of regenerating the bone tissue. DBP was extracted from the femurs of two typologies of Gallus gallus domesticus (the Yeonsan Ogye, a traditional and rare black chicken from Korea, and the Cornish cross, the most common breeds for industrial meat production) and the Pekin duck. The composite scaffold has been tested both in vitro and in vivo. In vitro studies using rat bone marrow-derived mesenchymal stem cells (rBMSCs) confirmed the cellular suitability of bone-specific gene expression for seeded GG-DBP scaffolds, differentiation capacity, and marked upregulation. The scaffold containing a DBP derived from the Yeonsan Ogye (YO) bone showed higher levels of cell proliferation and osteogenic differentiation in comparison with the scaffold with the DBP obtained from the other studied sources. These results have been related with the higher amount of melanin, studied by fluorescence, of the YO DBP compared to Cornish cross and Pekin duck. Overall, this study clearly shows the use of YO DBP as a promising material in bone tissue regeneration.

Polyoxalate nanoparticles as a biodegradable and biocompatible drug delivery vehicle.

One of major challenges in the drug delivery lies in the development of nanoparticles that are effectively delivered to targeted cells and release their payload over an extended period to achieve a clinical response. In this paper, we report a new family of biocompatible and biodegradable polymer, termed polyoxalate that degrades hydrolytically into nontoxic byproducts. Polyoxalate was synthesized from a simple one-step polymerization reaction of 1,4-cyclohexanedimethanol and oxalyl chloride and had a MW of approximately 11000 Da. This polymer was designed to degrade by water hydrolysis into 1,4-cyclohexanedimethanol and oxalic acid, which can be easily removed from a body. Polyoxalate had a hydrophobic backbone and was formulated into nanoparticles with a mean diameter of 600 nm, which is suitable for drug delivery involving phagocytosis by macrophages. Polyoxalate nanoparticles were readily taken up by RAW 264.7 macrophage cells and HEK (human embryonic kidney) 293 cells and exhibited a minimal cytotoxicity in a time- and dose-dependent manner. In comparison with PLGA nanoparticles, polyoxalate nanoparticles had a significantly higher cell viability. We anticipated that the ease of synthesis and excellent biocompatibility make polyoxalate highly potent for numerous applications in drug delivery.

A BMSCs-laden quercetin/duck's feet collagen/hydroxyapatite sponge for enhanced bone regeneration.

Treating critical-sized bone defects is an important issue in the field of tissue engineering and bone regeneration. From the various biomaterials for bone regeneration, collagen is an important and widely used biomaterial in biomedical applications, hence, it has numerous attractive properties including biocompatibility, hyper elastic behavior, prominent mechanical properties, support cell adhesion, proliferation, and biodegradability. In the present study, collagen was extracted from duck's feet (DC) as a new collagen source and combined with quercetin (Qtn), a type of flavonoids found in apple and onions and has been reported to affect the bone metabolism, for increasing osteogenic differentiation. Further, improving osteoconductive properties of the scaffold hydroxyapatite (HAp) a biodegradable material was used. We prepared 0, 25, 50, and 100 µM Qtn/DC/HAp sponges using Qtn, DC, and HAp. Their physiochemical characteristics were evaluated using scanning electron microscopy, compressive strength, porosity, and Fourier transform infrared spectroscopy. To assess the effect of Qtn on osteogenic differentiation, we cultured bone marrow mesenchymal stem cells on the sponges and evaluated by alkaline phosphatase, 3-4-2, 5-diphenyl tetrazolium bromide assay, and real-time polymerase chain reaction. Additionally, they were studied implanting in rat, analyzed through Micro-CT and histological staining. From our in vitro and in vivo results, we found that Qtn has an effect on bone regeneration. Among the different experimental groups, 25 µM Qtn/DC/HAp sponge was found to be highly increased in cell proliferation and osteogenic differentiation compared with other groups. Therefore, 25 µM Qtn/DC/HAp sponge can be used as an alternative biomaterial for bone regeneration in critical situations.