Design of palatal and lingual augmentation prostheses by using an intraoral scanner for a patient after a glossectomy: A clinical report.

Computer-aided design and computer-aided manufacturing was used to fabricate palatal and lingual augmentation prostheses for a patient with dysphagia after a glossectomy. The function of these prostheses was comparable with that of those fabricated by conventional methods. The patient outcome suggests that an intraoral scanner can be effectively used for the fabrication of augmentation prostheses for patients with dysphagia and a high risk of aspiration.

Enhancement of jaw bone regeneration via ERK1/2 activation using dedifferentiated fat cells.

BACKGROUND AIMS: Mesenchymal stem/stromal cells (MSCs) are multipotent and self-renewing cells that are extensively used in tissue engineering. Adipose tissues are known to be the source of two types of MSCs; namely, adipose tissue-derived MSCs (ASCs) and dedifferentiated fat (DFAT) cells. Although ASCs are sometimes transplanted for clinical cytotherapy, the effects of DFAT cell transplantation on mandibular bone healing remain unclear. METHODS: The authors assessed whether DFAT cells have osteogenerative potential compared with ASCs in rats in vitro. In addition, to elucidate the ability of DFAT cells to regenerate the jaw bone, the authors examined the effects of DFAT cells on new bone formation in a mandibular defect model in (i) 30-week-old rats and (ii) ovariectomy-induced osteoporotic rats in vivo. RESULTS: Osteoblast differentiation with bone morphogenetic protein 2 (BMP-2) or osteogenesis-induced medium upregulated the osteogenesis-related molecules in DFAT cells compared with those in ASCs. BMP-2 activated the phosphorylation signaling pathways of ERK1/2 and Smad2 in DFAT cells, but minor Smad1/5/9 activation was noted in ASCs. The transplantation of DFAT cells into normal or ovariectomy-induced osteoporotic rats with mandibular defects promoted new bone formation compared with that seen with ASCs. CONCLUSIONS: DFAT cells promoted osteoblast differentiation and new bone formation through ERK1/2 and Smad2 signaling pathways in vitro. The transplantation of DFAT cells promoted new mandibular bone formation in vivo compared with that seen with ASCs. These results suggest that transplantation of ERK1/2-activated DFAT cells shorten the mandibular bone healing process in cytotherapy.

AMPK activation enhances osteoblast differentiation on a titanium disc via autophagy.

PURPOSE: The acquisition of osseointegration during implant therapy is slower and poorer in patients with diabetes compared with healthy persons. The serum concentration of adiponectin in patients with type II diabetes is lower than that of healthy persons via the suppression of AMP-activated protein kinase (AMPK). Therefore, we hypothesized that the AMPK activation enhances bone formation around implants, resulting in the improved acquisition of osseointegration. The purpose of this study was to evaluate the impact of AMPK activation on osteoblast differentiation and its mechanism of downstream signaling on titanium disc (Ti). METHODS: Confluent mouse pre-osteoblasts (MC3T3-E1) cells (1 × 105 cells/well) were cultured with BMP-2 for osteoblast differentiation, in the presence or absence AICAR, an AMPK activator. We examined the effects of AMPK activation on osteoblast differentiation and the underlying mechanism on a Ti using a CCK8 assay, a luciferase assay, quantitative RT-PCR, and western blotting. RESULTS: Although the proliferation rate of osteoblasts was not different between a Ti and a tissue culture polystyrene dish, the addition of AICAR, AMPK activator slightly enhanced osteoblast proliferation on the Ti. AICAR enhanced the BMP-2-dependent transcriptional activity on the Ti, leading to upregulation in the expression of osteogenesis-associated molecules. AICAR simultaneously upregulated the expression of autophagy-associated molecules on the Ti, especially LC3-II. AdipoRon, an adiponectin receptor type1/type2 activator activated AMPK, and upregulated osteogenesis-associated molecules on Ti. CONCLUSIONS: AMPK activation enhances osteoblast differentiation on a Ti via autophagy, suggesting that it promotes the acquisition of osseointegration during implant therapy.

Application of a new scan body for face-driven fixed prosthetics.

OBJECTIVE: The current method of digitally designing dental prostheses mainly focuses on intra-oral soft and hard tissues, although the harmony of the facial soft tissue and the prosthesis is crucial, especially for esthetics. Here, we introduce a new method of digitally designing dental prostheses using a new device that generates a virtual patient and incorporates facial features into the prosthetic design. MATERIALS AND METHODS: A new extra-oral scan body for facial scanning was designed and developed. A definitive edentulous maxilla implant cast with four extra-oral scan bodies (regions: maxillary left and right lateral incisors, maxillary left and right premolars) was placed in the mouth of a dental mannequin. The dental mannequin was scanned with and without the extra-oral scan bodies. For reference data, an impression of the maxilla was taken and scanned with a laboratory scanner. By superimposing each acquired data, a virtual patient was generated, and the spatial location of the abutments relative to the face was clarified. Identifying the accurate location of the abutments enabled to design face-driven dental prosthesis. RESULTS: Based on the color-coded deviation map created by the data acquired from conventional and extra-oral scan bodies, the divergence of the two data was mostly within 0.1 mm, which proves that the extra-oral scan bodies were as accurate as conventional scan bodies. Therefore, the facial scan data and the scan data of the oral cavity were successfully superimposed, which allowed to generate a virtual patient to design face-driven prosthesis. CONCLUSION: The new method is effective for designing high-quality face-driven prostheses, especially when treating a patient with a full-arch implant-fixed prosthesis.

Space-making effect for new bone formation by suppressing scar contraction of mucosal epithelium of rat tooth extraction wound using diode laser and CO2 laser treatment.

Background/purpose: As an extraction wound closes, the mucosal epithelium of the tooth extraction wound impedes the space for new bone formation by invading into the extraction socket. Thus, the height of the alveolar crest decreases, causing significant depression of the alveolar mucosa. In this study, we created a rat tooth extraction model and examined the effects of laser irradiation by CO2 and diode on the dynamics of myofibroblast expression through α-SMA, and TGF-ß1. Materials and methods: After tooth extraction of five-week-old male Wistar rats, they were divided into two laser treatment groups (CO2 laser or diode laser was irradiated into tooth extraction socket) and non-laser treatment group (control group). Surrounding tissues, including the extraction socket, were removed at 3, 5, 7, and 21 days after tooth extraction and the expression of α-SMA and TGF-ß1 was verified using immunohistological techniques (6 animals in each group and each period, 72 animals in total). Results: α-SMA-positive cells and TGF-ß1-positive areas were significantly lower in the two laser treatment groups than in the control group. Particularly, the diode group almost had no TGF-ß1-positive areas on the 21st day when healing after tooth extraction was deemed to be completed. Conclusion: Both CO2 and diode laser irradiation of tooth extraction wounds decreases α-SMA-positive cells and TGF-ß1-positive areas. Further, it causes a decrease in myofibroblast expression and suppresses the invasion of mucosal epithelium into the extraction socket. Therefore, laser irradiation may exert a space-making effect for new bone formation and also contribute to socket preservation.

Effects of ytterbium laser surface treatment on the bonding of two resin cements to zirconia.

Monolithic zirconia crowns bonded to zirconia abutments have become more commonly used in the construction of cement-retained implant superstructures. The present study aimed to examine the effects of laser surface treatments on the bond strength of two resin cements to zirconia. Three types of surfaces were examined: untreated, alumina blasted, and ytterbium laser treated; and two types of resin cements: 4-META/MMA-TBB resin cement and composite resin cement. Half of the specimens were subjected to a thermocycling process. Subsequently, a shear bond test was carried out. In addition, surface roughness was measured for each surface type. The results showed that laser treatment increased zirconia surface roughness and that laser treatment significantly increased shear bond strength after the thermocycling of both cement types compared to no treatment. Our experimental results suggested that ytterbium laser surface treatment of zirconia increased the bond strength of resin cements.

Bond durability and surface states of titanium, Ti-6Al-4V alloy, and zirconia for implant materials.

PURPOSE: Screw-retained implant crowns used as dental implants comprise a zirconia coping and titanium base bonded using resin cement. These devices are prone to debonding failures. This study investigated the bond characteristics of implant materials based on shear bond strength (SBS) and surface characteristics. METHODS: Chemically pure (CP) titanium grade-4 (Ti), Ti-6Al-4V alloy (Ti-6Al-4V), and tetragonal polycrystalline zirconia (zirconia) were evaluated as adherent materials. Plates of each material were polished, primed for the respective resin cements, and cemented using either methyl methacrylate-based resin cement (Super-Bond) or composite-based resin cement (Panavia). The cemented samples were subjected to 10,000 thermocycles alternating between 5 and 55 °C, and the SBS were obtained before and after thermocycling. The sample surfaces were characterized based on surface observations, roughness, and free energy (SFE). RESULTS: The SBSs of all materials bonded using Panavia were significantly compromised during thermocycling and reached zero. Although the SBSs of Ti and Ti-6Al-4V bonded using Super-Bond were not significantly affected by thermocycling, those of zirconia decreased significantly. The bond durability between zirconia and Super-Bond was improved via alumina air-abrasion, which caused no significant loss of SBS after thermocycling. Surface analyses of the air-abraded zirconia validated these results and confirmed that its surface roughness and SFE were significantly increased. CONCLUSION: The bond durability between resin cement and zirconia was lower than that between Ti and Ti-6Al-4V. The alumina air-abrasion pretreatment of zirconia improved the SFE and surface roughness, thereby enhancing bond durability.

Human mandibular trabecular bone density correlation with mechanical strength: implications for implant dentistry.

PURPOSE: The prognosis of a dental implant depends on the mechanical properties of the bone. The preoperative diagnosis of bone quality has become more important, because the immediate loading procedure is now widely used, and a firm initial stability is required. Quantitative computed tomography (QCT) is an effective method of determining selectively the bone mineral density (BMD) of the trabecular bone mostly responsible for the survival of the implant. In this project, we investigated the relationship between the BMD measured by QCT and the mechanical strength of the mandible. MATERIALS AND METHODS: The BMD (mg/mL) of 58 trabecular bone specimens from 6 embalmed human cadaver mandibles were obtained using QCT. The compressive strength to break point was performed with a mechanical device. Each specimen was washed and weighed. RESULTS: The mean values of BMD for the anterior, premolar, and molar region were 633.3, 571.0, and 518.3 mg/mL, respectively. The mean values of compressive strength were 0.237, 0.216, and 0.196 kN, and the ash weights were 0.047, 0.044, and 0.039 g, respectively. There was a positive correlation between the BMD and the mechanical strength (R = 0.77) and between the ash weight and the mechanical strength (R = 0.84). CONCLUSION: There was strong correlation of bone strength, bone mineral, and bone density by QCT. QCT is an excellent preoperative diagnostic tool to select the most mechanically appropriate implant for initial stability and improve the survival prognosis.

Intramedullary injury combined with osteoporosis therapeutics regulates targeted local osteogenesis.

Bone marrow ablation prompts transient bone formation in nearly the entire medullary cavity before marrow regeneration occurs. Here, we establish a procedure to direct bone formation in a desired particular site within the medullary cavity for support of biomedical devices. Local intramedullary injury was performed in the tibiae of rats and parathyroid hormone (PTH), alendronate, or saline was administered. Newly generated bone in the medulla was assessed by micro-CT and histology. To evaluate the function of newly generated bone, animals received intramedullary injury in tibiae followed by daily PTH. At day-14, implants were placed in the endocortical bone and the bone response to the implants was assessed. The fate of newly generated bone was compared with and without implants. We found that neither intramedullary injury nor medication alone resulted in bone formation. However, when combined, substantial bone was generated locally inside the diaphyseal medulla. Newly formed bone disappeared without implant placement but was retained with implants. Bone was especially retained around and between the implants. This study found that local bone marrow disruption followed by PTH or alendronate generated substantial cancellous bone locally in the diaphyseal medulla. This approach offers promise as a tissue engineering tool in medicine and dentistry.

Effect of DNA/protamine complex paste on bone augmentation of the mandible: A pilot study on dogs.

OBJECTIVE: Our previous studies found that a salmon DNA-based scaffold containing protamine promoted bone regeneration of the calvarial defects of rats. The aim of the present pilot study was to examine the influence of the DNA/protamine (DP) complex on bone regeneration of a saddle type, alveolar ridge defects of the dog mandible. DESIGN: Alveolar ridge defects were performed in the mandibles of five adult female beagles. The following three treatment modalities were randomly allocated: (1) the DP complex paste, (2) a beta-tricalcium phosphate (ß-TCP), and (3) a blank (control). Healing of bone defects were evaluated by periapical radiography, micro-computed tomography (micro-CT), and histology. RESULTS: Periodical radiographic images revealed that a higher percentage of regenerated bone height was consistently achieved in the DP group, as compared with blank controls. All three-dimensional, sagittal, and coronal images of micro-CT showed increased amounts of newly formed bone and a greater bone volume/ tissue volume ratio, as compared with the blank and ß-TCP groups. In contrast, there was no significant difference in bone mineral density among the groups. Histological analysis confirmed that the alveolar bone defects were filled with newly formed bone with mature and compact properties in the DP group. CONCLUSIONS: These findings indicate that the DP complexes enhanced regeneration of vertical alveolar bone defects of the dog mandible.

Prospective multicenter non-randomized controlled study on intraosseous stability and healing period for dental implants in the posterior region.

BACKGROUND: A current implant body surface was treated with "rough processing" by sandblasting and acid etching for the purposes of obtaining more reliable osseointegration and shortening the treatment period. Various reports have examined the healing period with the use of these implant bodies, but a consensus opinion has not yet been obtained. The purpose of this study is to evaluate the relationship between insertion torque (IT) and implant stability quotient (ISQ) at implant treatment using the current rough-surfaced implant. We evaluated the implant treatment sites with ISQ values, IT values, and voxel values. METHODS: Participants in this study comprised 26 patients (10 males, 16 females; mean age, 55.5 years) who received posterior region dental implants at Tokyo Dental College Hospital or Fukuoka Dental College Hospital. For all participants, pretreatment computed tomography and determination of bone quality from voxel values were performed. Thirty-two implant bodies were inserted into the posterior region, and insertion torque was measured. ISQ was also measured at 0, 2, 4, 6, 8, and 12 weeks postoperatively. RESULTS: Eight implant bodies in the maxilla and 24 in the mandible were inserted. All ISQ values increased, exceeding 60 by 6 weeks postoperatively. For insertion torque < 30 N cm, ISQ increased significantly after 8 weeks. For ≥ 30 N cm, the ratio at which high ISQ values appeared increased significantly after 6 weeks. Compared with the treatment area with insertion torque < 40 N cm, the treatment area ≥ 40 N cm showed a significantly higher voxel value. CONCLUSIONS: No significant relationship was found between the insertion torque value and the ISQ value. Also, it was suggested that the ISQ value was considered to be an important indicator for observing the treatment state of the implant.

Ultrastructure of the interface between titanium and surrounding tissue in rat tibiae--a comparison study on titanium-coated and -uncoated plastic implants.

PURPOSES: The purposes of this study were to prepare experimental titanium-coated plastic implants suitable for electron microscopy examination of the titanium-bone interface and the response of tissue surrounding titanium, and to histologically compare surrounding tissue responses in coated and uncoated implants. MATERIALS AND METHODS: Experimental plastic implants were prepared from a plastic rod coated with a thin film of titanium. Plastic implants without coatings were used as controls. The implants were placed into tibiae of 10-week-old male rats. The specimens with implants were harvested 4 weeks after placement and observed under a light microscope, a transmission electron microscope, and a scanning electron microscope. RESULTS: In the transmission electron microscopy, the titanium layer of the experimental implant was a uniform layer that was approximately 150- to 250-nm wide. The new bone formation was observed around both titanium-coated implants and plastic implants. However, there was no direct bone contact with the plastic implant. DISCUSSION: The responses of tissue surrounding the experimental implants varied. Under an electron microscope, the following areas were observed: (1) an area with a direct contact between the titanium and bone, (2) an area at the interface where an amorphous layer was observed, (3) an area with progressing calcification in the surrounding tissue where the cells were adjacent to the titanium surface, and (4) an area in which bone resorption and apposition were observed and remodeling was thought to be occurring. CONCLUSION: The experimental titanium was homogenous and was considered to be highly useful in observing the responses of the surrounding tissue to the titanium surface.

Third molar transplantation combined with an osteotome sinus lift - two case reports.

We report here on our application of the socket lift technique to create a transplant socket for the transplanted maxillary molar. These outcomes suggest that this technique is likely to be effective for tooth transplantation when the maxillary sinus bottom is close to the alveolar crest.

Photothermal stress triggered by near infrared-irradiated carbon nanotubes promotes bone deposition in rat calvarial defects.

The bone regenerative healing process is often prolonged, with a high risk of infection particularly in elderly and diseased patients. A reduction in healing process time usually requires mechanical stress devices, chemical cues, or laser/thermal therapies. Although these approaches have been used extensively for the reduction of bone healing time, the exact mechanisms involved in thermal stress-induced bone regeneration remain unclear. In this study, we investigated the effect of optimal hyperthermia on rat calvarial defects in vivo and on osteogenesis in vitro. Photothermal stress stimulation was carried out using a new photothermal device, composed of an alginate gel including in carbon nanotubes and their irradiator with near-infrared light. Photothermal stress (15 min at 42℃, every day), trigged by near-infrared-induced carbon nanotube, promoted bone deposition in critical-sized calvarial defects compared with nonthermal stress controls. We recently reported that our novel DNA/protamine complex scaffold induces bone regeneration in calvarial defects. In this study, photothermal stress upregulated bone deposition in DNA/protamine-engrafted calvarial defects. Furthermore, photothermal stress significantly induced expression of osteogenic related genes in a time-dependent manner, including alkaline phosphatase, osterix, and osteocalcin. This was observed in DNA/protamine cells, which were expanded from regenerated tissue engrafted into the DNA/protamine scaffold, as well as in human MG63 preosteoblasts. In summary, this novel carbon nanotube-based photothermal stress approach upregulated expression of osteogenic-related genes in preosteoblasts, resulting in promotion of mineral deposition for enhanced bone repair.

Intermittent administration of parathyroid hormone ameliorates periapical lesions in mice.

INTRODUCTION: Intermittent administration of parathyroid hormone (PTH) promotes oral osseous wound healing and protects against ligature-induced alveolar bone loss. However, its therapeutic value on periapical periodontitis is unknown. The goal of this study was to determine the effect of intermittent PTH administration on the progression of periapical periodontitis. METHODS: Seven lymphotoxin alpha-deficient mice received pulp exposures of mandibular first and second molars. Exposed pulp in the right mandible was covered with plaque-contaminated fibrin, whereas exposed pulp in the left mandible was left open. After 4 weeks, the periapical tissues were examined to determine the effect of plaque-contaminated fibrin to induce periapical lesions. Fourteen mice received pulp exposure covered with plaque-contaminated fibrin. PTH (40 µg/kg/d) was administered intermittently to half of the mice for 3 weeks beginning 1 week after pulp exposure. The remaining half received saline injections as the vehicle control. At sacrifice, mandibles and tibiae were harvested and processed for histologic examination. Evaluation of neutrophils and blood vessels was performed after staining with immunofluorescence, and periradicular bone was histomorphometrically analyzed. RESULTS: The exposed pulp covered with plaque-contaminated fibrin resulted in significantly larger periapical lesions compared with the control. Intermittent PTH administration reduced the size of periapical lesions significantly. Significantly less neutrophil infiltration around the root apex was found in PTH-treated animals compared with the control. CONCLUSIONS: PTH treatment suppressed periapical inflammation by reducing neutrophil infiltration and protected against tissue destruction by periapical periodontitis.

Evaluation of bone formation guided by DNA/protamine complex with FGF-2 in an adult rat calvarial defect model.

DNA/protamine complex paste (D/P) and D/P complex paste with Fibroblast Growth Factor-2 (FGF-2) (D/P-FGF) were prepared to investigate their new bone formation abilities using an ∼40-week-old rat calvarial defect model. It was found that D/P could release FGF-2 proportionally in an in vitro experiment with an enzyme-linked immunosorbent assay. It was also found that aging adversely affected self-bone healing of rats by comparison with the results in a previous study using 10-week-old rats. Microcomputed tomography and histopathological examinations showed that new bone formation abilities of D/P and D/P-FGF were superior to that of the control (sham operation). Control, D/P and D/P-FGF showed newly formed bone areas of 6.7, 58.3, and 67.0%, respectively, 3 months after the operation. Moreover, it was found that FGF-2 could support the osteoanagenesis ability of D/P. It was considered that FGF-2 could play an important role in new bone formation at early stages because it induced the genes such as collagen I, CBFA, OSX, and OPN, which are initiated first in the process of osteogenesis. Therefore, D/P-FGF will be a useful injectable biomaterial with biodegradable properties for the repair of bone defects in the elderly.

Peri-implant bone density in senile osteoporosis-changes from implant placement to osseointegration.

PURPOSE: The aim of this study was to examine healing over time after implant body placement in a senile osteoporosis model and a control group. MATERIALS AND METHODS: In this study, 16-week-old male mice were used. The senile osteoporosis model consisted of senescence-accelerated prone 6 mice and the control group consisted of senescence-accelerated resistant 1 mice. Titanium-coated plastic implants were used as experimental implants whose dimensions were 3.0 mm in length, 1.1 mm in apical diameter, and 1.2 mm in coronal diameter. Bone samples were collected at 5, 7, 14, 21, and 28 days after implant placement. A micro-quantitative computed tomography (QCT) system was used to scan these samples and a phantom in order to quantitate bone mineral measurements. Bone mineral density (BMD) of each sample was measured. Each sample was also examined by light microscopy after QCT imaging. At 14 and 28 days after implant placement, the bone-implant contact (BIC) ratios were calculated from light microscopy images and were divided into cortical bone and bone marrow regions. RESULTS: When BMD was compared between the osteoporosis and control groups using micro-QCT, the osteoporosis group had a significantly lower BMD in the region 0-20 µm from the implant surface in the bone marrow region at 14 days onward after implant placement. Compared with the control group, the osteoporosis model also had significantly lower BMD in all regions 0-100 µm from the implant surface in the bone marrow region at 14 days after placement. However, in the cortical bone region, no statistically significant difference was observed in the regions at the bone-implant interface. Light microscopy revealed osseointegration for all implants 28 days after implant placement. The osteoporosis model tended to have lower BICs compared with that of the control group, although this did not reach statistical significance. DISCUSSION: Our results showed that osseointegration was achieved in the osteoporosis model. However, the BMD was 30-40% lower than that of the control group in the region closest to the implant surface in bone marrow region. Peri-implant BMD was lower in a relatively large area in the osteoporosis model during an important time for osseointegration. Therefore, this result suggests that osteoporosis might be considered as a risk factor in implant therapy. CONCLUSION: The osteoporosis model had a lower BMD than the control group in the region closest to the implant during an important time for osseointegration. This result suggests that senile osteoporosis might be a risk factor in implant therapy. However, the osteoporosis model and the control group had no difference in peri-implant BMD in the cortical bone region. This suggests that risk might be avoided by implant placement that effectively uses the cortical bone.

Chronological changes in the ultrastructure of titanium-bone interfaces: analysis by light microscopy, transmission electron microscopy, and micro-computed tomography.

PURPOSES: The objectives of this study were to chronologically examine the titanium-bone interfaces and to clarify the process of osseointegration using light microscopy, transmission electron microscopy (TEM), and micro-computed tomography (CT). MATERIALS AND METHODS: Experimental implants (Ti-coating plastic implants) were placed into tibiae of 8-week-old rats. Animals were sacrificed at 1 to 28 days after implant placement and prepared tissue specimens for a light microscope, a TEM, and micro-CT. RESULTS: New bone formation began 5 days after implant placement, and osseointegration was obtained by 14 days after implant placement. Osseointegration was well developed by 28 days after implant placement. DISCUSSION: TEM and quantitative computer tomography (QCT) results indicated that bone formation in osseointegration of titanium implants did not occur from the surfaces of the implant or preexisting bone, but it was likely that bone formation progressed at a site a small distance away from the surface. The bone formation took place in a scattered manner. Small bone fragments adhered to each other and transformed into reticular-shaped bone, and finally these bones became lamellar bone. CONCLUSION: Comparative analysis of the titanium-bone interfaces using light microscopy, TEM, and QCT by micro-CT revealed the precise process of osseointegration.

Students' opinion of a predoctoral implant training program.

Implant treatment today is highly predictable and provides valid restorative options for the completely or partially edentulous patient. In Japan, many dental care facilities have incorporated implant treatment, and such treatment is no longer rare. For predoctoral students, the educational environment related to implants is not always applicable in present clinical settings. In this article, we describe the implant training program developed at our university for predoctoral education, and we report the changes in student opinions regarding implant treatment by comparing pre- and post-training opinions. The newly developed models for implant training were effective in increasing student understanding that implant treatment is one prosthetic option for restoring missing teeth. In a survey of predoctoral students, responses indicating negative opinions toward implant treatment decreased after training, and responses indicating positive opinions increased. These findings indicated that this training was effective in deepening student understanding of implant treatment.

Effect on the amount of bone-implant contact when splinting immediate-loaded dental implants.

PURPOSE: Much attention has been focused on the immediate or early loading of implants with or without splinting. The purpose of this study was to evaluate the contact rate between bones and implants, with or without splinting. MATERIALS AND METHODS: Under general anesthesia, an 8-mm-deep cavity for a dental implant was drilled in the mandibular ridge of dogs where teeth had been extracted 4 months earlier. Rough-surfaced, cylindrical screw implants (International Team for Implantology [ITI] monotype implants 4 mm diameter and 8 mm long, Straumann, Basel, Switzerland) were placed with splinting on the right side and without splinting on the left side using gold abutment. Resin plates for the maxilla were adjusted to attach to the gold abutment in each mandible. At 4, 8, or 12 weeks after the implantation, specimens were stained using toluidine blue and fuchsin. The sections were observed and morphometric analysis was performed to measure the rates of bone-implant contact and new bone-implant contact. RESULTS: The ratio of bone-implant contact on the lingual side was higher than on the buccal side in both the splinted and the unsplinted groups, and the rates in the splinted group were also higher than in the unsplinted group. The ratio of new bone-implant contact was not significantly different between the splinted and unsplinted groups, except for spongy bone at 4 weeks. CONCLUSION: Splinting of immediate-loading dental implants can be adequate for osseointegration, particularly in spongy bone.