Electrostatics Control Nanoparticle Interactions with Model and Native Cell Walls of Plants and Algae.

A lack of mechanistic understanding of nanomaterial interactions with plants and algae cell walls limits the advancement of nanotechnology-based tools for sustainable agriculture. We systematically investigated the influence of nanoparticle charge on the interactions with model cell wall surfaces built with cellulose or pectin and performed a comparative analysis with native cell walls of Arabidopsis plants and green algae (Choleochaete). The high affinity of positively charged carbon dots (CDs) (46.0 ± 3.3 mV, 4.3 ± 1.5 nm) to both model and native cell walls was dominated by the strong ionic bonding between the surface amine groups of CDs and the carboxyl groups of pectin. In contrast, these CDs formed weaker hydrogen bonding with the hydroxyl groups of cellulose model surfaces. The CDs of similar size with negative (-46.2 ± 1.1 mV, 6.6 ± 3.8 nm) or neutral (-8.6 ± 1.3 mV, 4.3 ± 1.9 nm) ζ-potentials exhibited negligible interactions with cell walls. Real-time monitoring of CD interactions with model pectin cell walls indicated higher absorption efficiency (3.4 ± 1.3 10-9) and acoustic mass density (313.3 ± 63.3 ng cm-2) for the positively charged CDs than negative and neutral counterparts (p < 0.001 and p < 0.01, respectively). The surface charge density of the positively charged CDs significantly enhanced these electrostatic interactions with cell walls, pointing to approaches to control nanoparticle binding to plant biosurfaces. Ca2+-induced cross-linking of pectin affected the initial absorption efficiency of the positively charged CD on cell wall surfaces (∼3.75 times lower) but not the accumulation of the nanoparticles on cell wall surfaces. This study developed model biosurfaces for elucidating fundamental interactions of nanomaterials with cell walls, a main barrier for nanomaterial translocation in plants and algae in the environment, and for the advancement of nanoenabled agriculture with a reduced environmental impact.

Adjustable Intermolecular Interactions Allowing 2D Transition Metal Dichalcogenides with Prolonged Scavenging Activity for Reactive Oxygen Species.

There is an increasing demand for control over the dimensions and functions of transition metal dichalcogenides (TMDs) in aqueous solution toward biological and medical applications. Herein, an approach for the exfoliation and functionalization of TMDs in water via modulation of the hydrophobic interaction between poly(ε-caprolactone)-b-poly(ethylene glycol) (PCL-b-PEG) and the basal planes of TMDs is reported. Decreasing the hydrophobic PCL length of PCL-b-PEG from 5000 g mol-1 (PCL5000 ) to 460 g mol-1 (PCL460 ) significantly increases the exfoliation efficiency of TMD nanosheets because the polymer-TMD hydrophobic interaction becomes dominant over the polymer-polymer interaction. The TMD nanosheets exfoliated by PCL460 -b-PEG5000 (460-WS2 , 460-WSe2 , 460-MoS2 , and 460-MoSe2 ) show excellent and prolonged scavenging activity for reactive oxygen species (ROS), but each type of TMD displays a different scavenging tendency against hydroxyl, superoxide, and 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) radicals. A mechanistic study based on electron paramagnetic resonance spectroscopy and density functional theory simulations suggests that radical-mediated oxidation of TMDs and hydrogen transfer from the oxidized TMDs to radicals are crucial steps for ROS scavenging by TMD nanosheets. As-prepared 460-TMDs are able to effectively scavenge ROS in HaCaT human keratinocytes, and also exhibit excellent biocompatibility.

Selective Detection of an Infection Biomarker by an Osteo-Friend Scaffold: Development of a Multifunctional Artificial Bone Substitute.

Developments in three-dimensional (3D) printing technologies have led to many potential applications in various biomedical fields, especially artificial bone substitutes (ABSs). However, due to the characteristics of artificial materials, biocompatibility and infection remain issues. Here, multifunctional ABSs have been designed to overcome these issues by the inclusion of a biochemical modality that allows simultaneous detection of an infection biomarker by osteo-friend 3D scaffolds. The developed multifunctional scaffolds consist of calcium-deficient hydroxyapatite (CDHA), which has a similar geometric structure and chemical composition to human bone, and gold nanoparticles (Au NPs), which assists osteogenesis and modulates the fluorescence of labels in their microenvironment. The Au NPs were subsequently conjugated with fluorescent dye-labeled probe DNA, which allowed selective interaction with a specific target biomarker, and the fluorescent signal of the dye was temporally quenched by the Au NP-derived Förster resonance energy transfer (FRET). When the probe DNA unfolded to bind to the target biomarker, the fluorescence signal was recovered due to the increased distance between the dye and Au NPs. To demonstrate this sensing mechanism, a microbial oligonucleotide was selected as a target biomarker. Consequently, the multifunctional scaffold simultaneously facilitated osteogenic proliferation and the detection of the infection biomarker.

Rigiflex lithography-based nanodot arrays for localized surface plasmon resonance biosensors.

We present a facile and robust means of fabricating metallic nanodot arrays for localized surface plasmon resonance (LSPR) biosensors through the strategic coupling of a polymeric template prepared with rigiflex lithography and a subsequent metallization via electrodeposition. Rigiflex lithography provides the capability to realize large-scale nanosized features as well as process flexibility during contact molding. In addition, the electrodeposition process enables wet-based nanoscale metallization with high pattern fidelity and geometric controllability. Generated metallic nanodot arrays can be used as a general platform for LSPR biosensors via the sequential binding of chemicals and biomolecules. Extinction spectra of the corresponding LSPR signal are measured with UV-vis-NIR spectroscopy, from which the pattern size and shape dependence of LSPR are readily confirmed. The feasibility of a very sensitive biosensor is demonstrated by the targeted binding of human immunoglobulin G, yielding subnanomolar detection capability with high selectivity.

Optimization of Hydroxypropyl Methylcellulose and Dextrin in Development of Dried Nanosuspension for Poorly Water-Soluble Drug.

The purpose of this study is to identify the effects of a stabilizer and matrix former in the development of a celecoxib dried nanosuspension (DNS) for high dissolution rate and drug loading. Tween 80 and Hydroxypropyl Methylcellulose (HPMC) were used as stabilizers in the bead-milling process and dextrin was used as the matrix former in the spray-drying. Various nanosuspensions (NS) were prepared by varying the ratio of HPMC and dextrin, and the physicochemical properties of each formulation were evaluated for particle size, morphology, drug loading, crystallinity, redispersibility, physical stability and dissolution rate. HPMC efficiently stabilized the NS system and reduced the particle size of NS. The mean particle size of the NS with 0.5% HPMC (w/v) was the smallest (248 nm) of all formulations. Dextrin has been shown to inhibit the increase of particle size efficiently, which is known to occur frequently when NS is being solidified. As the dextrin increased in DNS, the dissolution rates of reconstituted NS were significantly improved. However, it was confirmed that more than the necessary amount of dextrin in DNS reduced the dissolution and drug loading. The dissolution of celecoxib in DNS prepared at the ratio (drug:dextrin, 1:2.5) was almost the highest. The dissolution of optimal formulation was 95.8% at 120 min, which was 2.0-fold higher than that of NS dried without dextrin. In conclusion, these results suggest that the formulation based on Tween 80, HPMC and dextrin may be an effective option for DNS to enhance its in vitro dissolution and in vivo oral absorption.

Treatment of Class I crowding using simple tubes bonded with customized resin coverings: A case report.

As an alternative to the conventional fixed appliance that uses orthodontic brackets, a simple round tube without a bonding base can be bonded to the tooth surface by covering the tube with flowable resin. In this technique, bent wires cannot be inserted into the simple tubes; therefore, repositioning of the simple tubes is often required for adjustments. To reduce repositioning of simple tubes, a dome-shaped resin covering of the simple tube can be designed with a customized in-and-out compensation, using three-dimensional computer-aided design software based on digital simulation of orthodontic tooth movement. In the present case, the use of simple tubes bonded with customized resin coverings in a Class I nonextraction case is described in a 17-year-old male, in whom moderate crowding of the anterior teeth was treated over an 8-month period. This case shows that simple tubes can be used as an alternative to brackets in some Class I nonextraction cases, with the potential benefit of reducing decalcification.

Myasthenia Crisis Induced by Pegylated-Interferon in Patient With Chronic Hepatitis C: A Case Report.

Myasthenia gravis is occasionally associated with thymoma that needs surgical resection and may progress to severe respiratory failure. We experienced a rare case of myasthenia crisis during antiviral therapy for chronic hepatitis C, in whom mediastinal thymoma was discovered and successfully managed with surgical thymectomy and meticulous medical care.A 47-year-old-male patient complained of sudden diplopia 1 week after stopping 11-week administration of pegylated-interferon and ribavirin for chronic hepatitis C. Ophthalmologic examinations revealed ptosis on the right eyelid and restricted right eye movement. Myasthenia gravis was confirmed by positive repetitive nerve stimulation test and positive serum antiacetylcholine receptor antibody test, and mediastinal thymoma was found on chest CT scan. The ocular myasthenia gravis progressed to respiratory failure even after discontinuing antiviral treatment but eventually recovered with thymectomy, anticholinesterase administration, steroid pulse therapy, and prolonged ventilator care. We describe the clinical features of this life-threatening complication of interferon treatment along with previous myasthenia crisis cases by interferon for chronic hepatitis C.In patients with chronic hepatitis C who is going to receive interferon-based antiviral treatment, physicians need to keep in mind the potential life-threatening manifestations of myasthenia gravis before and during antiviral treatment especially when patients complain of muscular weakness and easy fatigability.

Polymer-mediated formation and assembly of silver nanoparticles on silica nanospheres for sensitive surface-enhanced Raman scattering detection.

To impart a desired optical property to metal nanoparticles (NPs) suitable for surface-enhanced Raman scattering (SERS) applications, it is crucial to assemble them in two or three dimensions in addition to controlling their size and shape. Herein, we report a new strategy for the synthesis and direct assembly of Ag NPs on silica nanospheres (AgNPs-SiNS) in the presence of poly(ethylene glycol) (PEG) derivatives such as PEG-OH, bis(amino)-PEGs (DA-PEGs), and O,O'-bis(2-aminopropyl)PEG (DAP-PEG). They exhibited different effects on the formation of Ag NPs with variable sizes (10-40 nm) and density on the silica surface. As the molecular weight (MW) of DA-PEGs increased, the number of Ag NPs on the silica surface increased. In addition, DAP-PEG (MW of 2000), which has a 2-aminopropyl moiety at both ends, promoted the most effective formation and assembly of uniform-sized Ag NPs on a silica surface, as compared to the other PEG derivatives with the same molecular weight. Finally, we demonstrated that AgNPs-SiNS bearing 4-fluorobenzenethiol on its surface induced the strong SERS signal at the single-particle level, indicating that each hybrid particle has internal hot spots. This shows the potential of AgNPs-SiNS for SERS-based sensitive detection of target molecules.