Charging effect in Au nanoparticle memory device with biomolecule binding mechanism.

Organic memory device having gold nanoparticle (Au NPs) has been introduced in the structure of metal-pentacene-insulator-silicon (MPIS) capacitor device, where the Au NPs layer was formed by a new bonding method. Biomolecule binding mechanism between streptavidin and biotin was used as a strong binding method for the formation of monolayered Au NPs on polymeric dielectric of poly vinyl alcohol (PVA). The self-assembled Au NPs was functioned to show storages of charge in the MPIS device. The binding by streptavidin and biotin was confirmed by AFM and UV-VIS. The UV-VIS absorption of the Au NPs was varied at 515 nm and 525 nm depending on the coating of streptavidin. The AFM image showed no formation of multi-stacked layers of the streptavidin-capped Au NPs on biotin-NHS layer. Capacitance-voltage (C-V) performance of the memory device was measured to investigate the charging effect from Au NPs. In addition, charge retention by the Au NPs storage was tested to show 10,000 s in the C-V curve.

Evaluation of Quality Control Methods for Foot-And-Mouth Disease Vaccines by High-Performance Liquid Chromatography.

Foot-and-mouth disease (FMD) is considered one of the highly contagious viral infections affecting livestock. In Korea, an FMD vaccination policy has been implemented nationwide since 2010 for the prevention and control of FMD. Since the vaccines are imported from various countries, standardized quality control measures are critical. In this study, we aimed to validate a high-performance liquid chromatography (HPLC) device in the Animal and Plant Quarantine Agency lab and identify an appropriate FMD vaccine pretreatment method for HPLC-a simple, reliable, and practical method to measure antigen content. Based on the analyses of specificity, linearity, accuracy, repeatability, intermediate precision, limits of detection, and limits of quantification using FMD standard samples, we validated the method using a standard material. Overall, we confirmed that the HPLC technique is effective for the quantitative assessment of the FMD virus 146S antigen in Korea. Using commercial FMD vaccines, we evaluated three separation methods and identified the method using n-pentanol and trichloroethylene as optimal for HPLC analysis. Our HPLC method was effective for the analytical detection of the antigen content in FMD vaccine, and it may be useful as a reference method for national lot-release testing.

Electrochemical corrosion behavior of a non-vascular, bi-stent combination, surgical esophageal nitinol stent in phosphate-buffered saline solution.

In the present work, the corrosion behavior of a bi-stent combination, which is the combination of an uncoated outer stent and silicone-coated body stent, was assessed by the use of electrochemical methods in phosphate-buffered saline at 37 °C. Although each stent comprising the bi-stent combination showed favorable corrosion properties, the bi-stent combination showed significant decreases in these corrosion properties. Corrosion was concentrated on the uncoated outer stent of the bi-stent combination. The cathodic reaction was activated on the outer stent of the bi-stent combination by the galvanic effect, and the hydrogen generated was detrimental to the surface film on the outer stent. In addition, hydrogen had a synergic effect with chloride and accelerated the corrosion reaction on the outer stent.

Microfabricated in-channel structured polydimethylsiloxane microfluidic system for a lab-on-a-chip.

In this paper, the fabrication of microfluidic system integrated with micropump and microvalve on the same substrate and its high performance are described. The microfabricated microfluidic system has been optimized for application in capillary electrophoresis-electrochemical detector (CE-ECD), polymerase chain reaction (PCR) and microcantilever. The system is realized by means of a polydimethylsiloxane (PDMS)-glass chip and indium tin oxide heater. The pumping rates of the proposed micropump are measured as functions of the frequency and the duty-ratio of applied voltage. The performances of the microvalves are characterized under the on/off alternation with the applied power of the indium tin oxide (ITO) heater. The flow rate gradually decreases as the applied heater power increase. The optimized membrane thickness for microfluidic system is 350 microm. At this condition, the power of the cut-off flow in microvalve is 400 mW and the 70 nl/min of maximum pumping rate is observed at a duty ratio of 4% and a frequency of 4 Hz for the applied pulse power.

Fabrication of thin film titania with nanopores, nanopoles, and nanopipes by nanoporous alumina template.

We demonstrate the formation of thin film titania (TiO2) with a dense array of nanopores, nanopoles, and nanopipes. The heights of pores, poles, and pipes were approximately 130 nm, 180 nm, and 200 nm, respectively. The aspect ratios of these three structures were approximated between 2 and 3. In order to obtain titania thin films, a nanoporous alumina (Al2O3) template was fabricated by performing a two-step anodization process. The spin-coated titania films were uniformly patterned by a nanoimprinting lithography technique with a textured poly(methyl methacrylate) (PMMA) mold or nanoporous alumina template. The titania films are very useful for solar cells, photocatalytic and sensing applications, in which nano-structuring of surfaces with controlled dimensions is vital.

Financial Impact of Foot-and-mouth disease outbreaks on pig farms in the Republic of Korea, 2014/2015.

The financial impact of foot-and-mouth disease (FMD) that occurred in 180 piggeries (100 farrow-to-finish and 80 fattening farms) confirmed infected during the 2014/2015 epidemic in the Republic of Korea was estimated at the farm level. The median loss due to slaughtering of pigs prior to their expected market weights was US$ 71.8 (uncovered compensation-compensation loss) plus US$ 57.3 (foregone net gain) per pig. Median loss per farm was US$ 27,487 (55.6% of total loss) for compensation and US$ 15,925 (44.4%) for foregone net gain. The total loss per farm (median, 25th-75th percentile) was US$ 43,822 (9,767-115,893), which represented 49.4% (11.5-112.8) of the annual net gain of pig farms. The total financial loss in 180 FMD outbreak pig farms was US$ 25.2 million, which was nearly one-half of the control cost (US$ 58.3 million) spent by the Korean government on this epidemic. The findings in this study should help planning to help reduce the impact at the farm level in the Republic of Korea in the future.

Does an Injection of Adipose-Derived Mesenchymal Stem Cells Loaded in Fibrin Glue Influence Rotator Cuff Repair Outcomes? A Clinical and Magnetic Resonance Imaging Study.

BACKGROUND: The mesenchymal stem cell (MSC)-based tissue engineering approach has been developed to improve the treatment of rotator cuff tears. Hypothesis/Purpose: The purpose was to determine the effect of an injection of adipose-derived MSCs loaded in fibrin glue during arthroscopic rotator cuff repair on clinical outcomes and to evaluate its effect on structural integrity using magnetic resonance imaging (MRI). The hypothesis was that the application of adipose-derived MSCs would improve outcomes after the surgical repair of a rotator cuff tear. STUDY DESIGN: Cohort study; Level of evidence, 3. METHODS: Among 182 patients treated with arthroscopic surgery for a rotator cuff tear, 35 patients treated with arthroscopic rotator cuff repair alone (conventional group) were matched with 35 patients who underwent arthroscopic rotator cuff repair with an injection of adipose-derived MSCs loaded in fibrin glue (injection group) based on sex, age, and lesion size. Outcomes were assessed with respect to the visual analog scale (VAS) for pain, range of motion (ROM) (including forward flexion, external rotation at the side, and internal rotation at the back), and functional measures of the Constant score and University of California, Los Angeles (UCLA) shoulder rating scale. Repaired tendon structural integrity was assessed by using MRI at a minimum of 12 months after surgery, and the mean clinical follow-up was 28.8 ± 4.2 months in the conventional group and 28.3 ± 3.8 months in the injection group. RESULTS: The mean VAS score at rest and during motion improved significantly in both groups after surgery. However, there were no significant differences between the groups at the final follow-up ( P = .256 and .776, respectively). Compared with preoperative measurements, forward flexion and external rotation at the side significantly improved at the final follow-up in both groups (all P < .05). However, no significant improvements in internal rotation at the back were observed in either group ( P = .625 and .834 for the conventional and injection groups, respectively). There were also no significant differences between the groups at the final follow-up for any of the 3 ROM positions (all P > .05). The mean Constant score and UCLA score improved significantly in both groups after surgery, but there were no significant differences between the groups at the final follow-up ( P = .634 and .302, respectively). MRI indicated a retear rate of 28.5% in the conventional group and 14.3% in the injection group ( P < .001). CONCLUSION: This study revealed that an injection of adipose-derived MSCs loaded in fibrin glue during rotator cuff repair could significantly improve structural outcomes in terms of the retear rate. There were, however, no clinical differences in the 28-month period of follow-up. Although still in the early stages of application, MSC augmentation of surgical rotator cuff repair appears useful for providing an adequate biological environment around the repair site.

Mesenchymal stem cell implantation in osteoarthritic knees: is fibrin glue effective as a scaffold?

BACKGROUND: The cell-based tissue engineering approach that uses mesenchymal stem cells (MSCs) has addressed the issue of articular cartilage repair in osteoarthritic (OA) knees. However, to improve outcomes, an advanced surgical procedure with tissue-engineered scaffolds may be needed to treat patients with large cartilage lesions. PURPOSE: To investigate the clinical and second-look arthroscopic outcomes of the implantation of MSCs loaded in fibrin glue as a scaffold in patients with OA knees and to compare these outcomes with those of MSC implantation without a scaffold. STUDY DESIGN: Cohort study; Level of evidence, 3. METHODS: This study retrospectively evaluated 54 patients (56 knees) who were examined with second-look arthroscopy after MSC implantation for cartilage lesions in their OA knees. Patients were divided into 2 groups: 37 patients (39 knees) were treated with MSC implantation without a scaffold (group 1), and 17 patients (17 knees) underwent implantation of MSCs loaded in fibrin glue as a scaffold (group 2). Clinical outcomes were evaluated according to the International Knee Documentation Committee (IKDC) score and the Tegner activity scale, and cartilage repair was assessed with the International Cartilage Repair Society (ICRS) grade. Statistical analyses were performed to identify various prognostic factors associated with the clinical and second-look arthroscopic outcomes. RESULTS: At final follow-up (mean, 28.6 months; range, 24-34 months), the mean IKDC score and Tegner activity scale in each group significantly improved: group 1, from 38.1±7.7 to 62.0±11.7 (IKDC) and from 2.5±0.9 to 3.5±0.8 (Tegner); group 2, from 36.1±6.2 to 64.4±11.5 (IKDC) and from 2.2±0.8 to 3.8±0.8 (Tegner) (P<.001 for all). According to the overall ICRS cartilage repair grades, 9 of the 39 lesions (23%) in group 1 and 12 of the 17 lesions (58%) in group 2 achieved a grade of I or II. There was a significant difference in ICRS grades between the groups (P=.028). Overweight (body mass index≥27.5 kg/m2) and large lesion size (≥5.7 cm2) were significant predictors of poor clinical and arthroscopic outcomes in group 1 (P<.05 for both). There was a similar trend in group 2, but the differences were not significant, possibly owing to the smaller sample size. CONCLUSION: Clinical and arthroscopic outcomes of MSC implantation were encouraging for OA knees in both groups, although there were no significant differences in outcome scores between groups. However, at second-look arthroscopy, there were better ICRS grades in group 2.

An integrated PCR microfluidic chip incorporating aseptic electrochemical cell lysis and capillary electrophoresis amperometric DNA detection for rapid and quantitative genetic analysis.

A fully integrated microchip for performing cell lysis, polymerase chain reaction (PCR) and quantitative analysis of DNA amplicons in a single step is described herein. The chip was built on glass substrate using an indium-tin-oxide (ITO) microheater and PDMS engraved microchannels, which integrated an electrochemical cell lysis zone, a continuous flow PCR module and capillary electrophoresis amperometric detection (CE-AD) system. The total length of the microchannel was 4625 mm for performing 25 cycles of flow-through PCR and was laid on a handheld form factor of 96 × 96 mm(2) area. The key to the fabrication of such a device lies in the use of a single medium to carry out different kinds of biochemical reactions and hence, a reagentless electrochemical cell lysis protocol was integrated on the microchip which was capable of lysing most cell types, including difficult to lyse gram positive bacteria. The lysate contained genomic DNA from a sample which was proven to be suitable for PCR reactions. Genetic analysis was successfully performed on the microchip with purified lambda phage genomic DNA and various cell types, including non-tumorigenic MCF-10A and tumorigenic MCF-7 human cell lines, gram negative bacteria Escherichia coli O157:H7, and gram positive bacteria Bacillus subtilis, at an optimized flow rate of 5 µl min(-1). For the detection of amplicon DNA, a CE-AD system was used, with semisolid alkaline agarose within the capillary microchannel to minimize interference from cell debris and for efficient resolution of DNA fragments. High signal to noise ratio during amperometric detection and the use of online FFT filtering protocol enhanced the limit of detection of DNA amplicons. Therefore, with a combination of portability, cost-effectiveness and performance, the proposed integrated PCR microchip can be used for one step genetic analysis of most of the cell types and will enable more accessible healthcare.

DNA hybridization sensor based on pentacene thin film transistor.

A DNA hybridization sensor using pentacene thin film transistors (TFTs) is an excellent candidate for disposable sensor applications due to their low-cost fabrication process and fast detection. We fabricated pentacene TFTs on glass substrate for the sensing of DNA hybridization. The ss-DNA (polyA/polyT) or ds-DNA (polyA/polyT hybrid) were immobilized directly on the surface of the pentacene, producing a dramatic change in the electrical properties of the devices. The electrical characteristics of devices were studied as a function of DNA immobilization, single-stranded vs. double-stranded DNA, DNA length and concentration. The TFT device was further tested for detection of λ-phage genomic DNA using probe hybridization. Based on these results, we propose that a "label-free" detection technique for DNA hybridization is possible through direct measurement of electrical properties of DNA-immobilized pentacene TFTs.

Investigation of thermodynamic parameters in the thermal decomposition of plastic waste-waste lube oil compounds.

Thermal decomposition properties of plastic waste-waste lube oil compounds were investigated under nonisothermal conditions. Polyethylene (PE), polypropylene (PP), polystyrene (PS), and polyethylene terephthalate (PET) were selected as representative household plastic wastes. A plastic waste mixture (PWM) and waste lube oil (WLO) were mixed with mixing ratios of 33, 50, and 67 (w/w) % on a PWM weight basis, and thermogravimetric (TG) experiments were performed from 25 to 600 degrees C. The Flynn-Wall method and the Ozawa-Flynn-Wall method were used for analyses of thermodynamic parameters. In this study, activation energies of PWM/WLO compounds ranged from 73.4 to 229.6 kJ/mol between 0.2 and 0.8 of normalized mass conversions, and the 50% PWM/WLO compound had lower activation energies and enthalpies among the PWM/WLO samples at each mass conversion. At the point of maximum differential mass conversion, the analyzed activation energies, enthalpies, entropies, and Gibbs free energies indicated that mixing PWM and WLO has advantages in reducing energy to decrease the degree of disorder. However, no difference in overall energy that would require overcoming both thermal decomposition reactions and degree of disorder was observed among PWM/WLO compounds under these experimental conditions.