RESUMO
OBJECTIVES: The objective of the study was to evaluate the radiographic changes in sinus mucosal thickness (SMT) in patients with mucosal thickening of odontogenic origin after maxillary molar extraction and lateral sinus augmentation with simultaneous surgical drainage and implant placement. MATERIALS AND METHODS: Forty-six patients were included in this study. The changes in SMT were evaluated using cone-beam computed tomography images produced at four time points: before extraction (T0), before surgery (T1), immediately after surgery (T2), and after prosthesis delivery (T3), and statistical differences between time points were analyzed. The changes in SMT and augmented bone height (ABH) regarding the reason of extraction, smoking, ostial patency, and the presence of postoperative sinusitis were also evaluated. RESULTS: Over time points, SMT gradually decreased (T0: 19.44 ± 9.22 mm, T1: 15.10 ± 8.89 mm, T2: 8.42 ± 6.01 mm, and T3: 4.16 ± 4.91 mm) (p < .05). Five out of 6 patients with ostial obstruction at T1 presented ostial patency at T3. Two patients developed postoperative sinusitis but recovered with medication. Ostial patency at T1, SMT at T1, and reason of extraction did not statistically significantly influence SMT at T3. SMT at T1 had no statistically significant impact on ABH change between T2 and T3. CONCLUSION: Sinus mucosal thickness was gradually reduced by extraction of compromised teeth and drainage during lateral sinus augmentation. The drainage contributed more to the reduction in SMT.
Assuntos
Levantamento do Assoalho do Seio Maxilar , Sinusite , Seios Transversos , Humanos , Seio Maxilar/diagnóstico por imagem , Seio Maxilar/cirurgia , Levantamento do Assoalho do Seio Maxilar/métodos , Extração Dentária , Tomografia Computadorizada de Feixe Cônico/métodos , DrenagemRESUMO
The development of nerve conduits with a three-dimensional porous structure has attracted great attention as they closely mimic the major features of the natural extracellular matrix of the nerve tissue. As low levels of reactive oxygen species (ROS) function as signaling molecules to promote cell proliferation and growth, this study aimed to fabricate protoporphyrin IX (PpIX)-immobilized cellulose (CEPP) monoliths as a means to both guide and stimulate nerve regeneration. CEPP monoliths can be fabricated via a simple thermally induced phase separation method and surface modification. The improved nerve tissue regeneration of CEPP monoliths was achieved by the activation of mitogen-activated protein kinases, such as extracellular signal-regulated kinases (ERKs). The resulting CEPP monoliths exhibited interconnected microporous structures and uniform morphology. The results of in vitro bioactivity assays demonstrated that the CEPP monoliths with under 0.54 ± 0.07 µmol/g PpIX exhibited enhanced photodynamic activity on Schwann cells via the generation of low levels of ROS. This photodynamic activation of the CEPP monoliths is a cell-safe process to stimulate cell proliferation without cytotoxic side effects. In addition, the protein expression of phospho-ERK increased considerably after the laser irradiation on the CEPP monoliths with low content of PpIX. Therefore, the CEPP monoliths have a potential application in nerve tissue regeneration as new nerve conduits.
Assuntos
Celulose/química , MAP Quinases Reguladas por Sinal Extracelular/metabolismo , Protoporfirinas/farmacologia , Células de Schwann/citologia , Animais , Linhagem Celular , Proliferação de Células/efeitos dos fármacos , Proliferação de Células/efeitos da radiação , Regulação da Expressão Gênica/efeitos dos fármacos , Regulação da Expressão Gênica/efeitos da radiação , Terapia com Luz de Baixa Intensidade , Regeneração Nervosa , Tecido Nervoso/química , Fosforilação , Protoporfirinas/química , Ratos , Espécies Reativas de Oxigênio/metabolismo , Células de Schwann/efeitos dos fármacos , Células de Schwann/metabolismo , Células de Schwann/efeitos da radiaçãoRESUMO
Photodynamic therapy (PDT) has been extensively explored as a promising alternative therapeutic approach for many malignant tumors. However, the PDT system generally involves unsatisfactory tumor specificity and nonspecific accumulation of photosensitizers around the target cancer cells, leading to phototoxic damage to adjacent healthy normal cells. In this study, we developed pheophorbide a (Pheo a)/human epidermal growth factor receptor 2 (HER2) targeting peptide (epitope form, HLTV, PEG2-LTVSPWY)-co-conjugated methoxy poly(ethylene glycol)-block-poly(L-lysine hydrochloride) (PEG-PLL)/hyaluronic acid (HA) (P3H2) polymeric micelles via a self-assembly method for HER2-targeted PDT treatment for breast cancer, thereby enhancing the PDT efficacy. The synthesized P3H2 polymeric micelles were spherical, with an average diameter of 125.7 ± 21.2 nm in an aqueous solution. The results ofin vitrocytotoxicity assays demonstrated that the P3H2 polymeric micelles significantly improved PDT efficacy on the SK-BR-3 cells due to the enhanced targeting ability. In addition, PDT treatment using the P3H2 polymeric micelles effectively killed breast cancer cells by inducing higher intracellular reactive oxygen species generation and apoptotic cell death. In particular, the three-dimensional cell culture model proved the synergistic PDT efficacy using P3H2 polymeric micelles on the SK-BR-3 cells. Based on these results, the PDT treatment using P3H2 polymeric micelles can serve as a highly effective therapeutic modality for breast cancer.
Assuntos
Apoptose/efeitos dos fármacos , Micelas , Fármacos Fotossensibilizantes/farmacologia , Receptor ErbB-2/metabolismo , Neoplasias da Mama/tratamento farmacológico , Neoplasias da Mama/metabolismo , Neoplasias da Mama/patologia , Linhagem Celular Tumoral , Sobrevivência Celular/efeitos dos fármacos , Clorofila/análogos & derivados , Clorofila/química , Clorofila/farmacologia , Clorofila/uso terapêutico , Feminino , Humanos , Ácido Hialurônico/química , Fotoquimioterapia , Fármacos Fotossensibilizantes/química , Fármacos Fotossensibilizantes/uso terapêutico , Polietilenoglicóis/química , Polilisina/químicaRESUMO
Integrating multi-modal therapies into one platform could show great promise in overcoming the drawbacks of conventional single-modal therapy and achieving improved therapeutic efficacy in cancer. In this study, we prepared pheophorbide a (Pheo a)/targeting ligand (epitope analog of oncoprotein E7, EAE7)-conjugated poly(γ-glutamic acid) (γ-PGA)/poly(lactide-co-glycolide)-block-poly(ethylene glycol) methyl ether (MPEG-PLGA)/hyaluronic acid (PPHE) polymeric nanoparticles via self-assembly and encapsulation method for the photodynamic therapy (PDT)/cold atmospheric plasma (CAP) combinatory treatment of human papillomavirus (HPV)-positive cervical cancer, thereby enhancing the therapeutic efficacy. The synthesized PPHE polymeric nanoparticles exhibited a quasi-spherical shape with an average diameter of 80.5 ± 17.6 nm in an aqueous solution. The results from the in vitro PDT efficacy assays demonstrated that PPHE has a superior PDT activity on CaSki cells due to the enhanced targeting ability. In addition, the PDT/CAP combinatory treatment more effectively inhibited the growth of cervical cancer cells by causing elevated intracellular reactive oxygen species generation and apoptotic cell death. Moreover, the three-dimensional cell culture model clearly confirmed the synergistic therapeutic efficacy of the PDT and the CAP combination therapy using PPHE on CaSki cells. Overall, these results indicate that the PDT/CAP combinatory treatment using PPHE is a highly effective new therapeutic modality for cervical cancer.
Assuntos
Nanopartículas/química , Fotoquimioterapia , Gases em Plasma/uso terapêutico , Polímeros/química , Neoplasias do Colo do Útero/terapia , Animais , Apoptose , Biomarcadores , Linhagem Celular , Sobrevivência Celular , Terapia Combinada , Gerenciamento Clínico , Feminino , Humanos , Imagem Molecular , Nanopartículas/ultraestrutura , Fotoquimioterapia/métodos , Poliésteres/química , Polietilenoglicóis/química , Ácido Poliglutâmico/análogos & derivados , Ácido Poliglutâmico/química , Espécies Reativas de Oxigênio/metabolismo , Resultado do Tratamento , Neoplasias do Colo do Útero/diagnóstico por imagem , Neoplasias do Colo do Útero/patologiaRESUMO
Gelatin has excellent biological properties, but its poor physical properties are a major obstacle to its use as a biomaterial ink. These disadvantages not only worsen the printability of gelatin biomaterial ink, but also reduce the dimensional stability of its 3D scaffolds and limit its application in the tissue engineering field. Herein, biodegradable suture fibers were added into a gelatin biomaterial ink to improve the printability, mechanical strength, and dimensional stability of the 3D printed scaffolds. The suture fiber reinforced gelatin 3D scaffolds were fabricated using the thermo-responsive properties of gelatin under optimized 3D printing conditions (-10 °C cryogenic plate, 40-80 kPa pneumatic pressure, and 9 mm/s printing speed), and were crosslinked using EDC/NHS to maintain their 3D structures. Scanning electron microscopy images revealed that the morphologies of the 3D printed scaffolds maintained their 3D structure after crosslinking. The addition of 0.5% (w/v) of suture fibers increased the printing accuracy of the 3D printed scaffolds to 97%. The suture fibers also increased the mechanical strength of the 3D printed scaffolds by up to 6-fold, and the degradation rate could be controlled by the suture fiber content. In in vitro cell studies, DNA assay results showed that human dermal fibroblasts' proliferation rate of a 3D printed scaffold containing 0.5% suture fiber was 10% higher than that of a 3D printed scaffold without suture fibers after 14 days of culture. Interestingly, the supplement of suture fibers into gelatin biomaterial ink was able to minimize the cell-mediated contraction of the cell cultured 3D scaffolds over the cell culture period. These results show that advanced biomaterial inks can be developed by supplementing biodegradable fibers to improve the poor physical properties of natural polymer-based biomaterial inks.
Assuntos
Gelatina/química , Alicerces Teciduais/química , Materiais Biocompatíveis/química , Células Cultivadas , Humanos , Hidrogéis/química , Tinta , Impressão Tridimensional , Suturas , Engenharia Tecidual/métodosRESUMO
Medical devices, which enhance the quality of life, have experienced a gradual increase in demand. Various research groups have attempted to incorporate soft materials such as skin into wearable devices. We developed a stretchable substrate with high elasticity by forming a porous structure on polydimethylsiloxane (PDMS). To optimize the porous structure, we propose a manufacturing process that utilizes a high-pressure steam with different viscosities (400, 800, 2100, and 3000 cP) of an uncured PDMS solution. The proposed method simplifies the manufacturing of porous structures and is cost-effective compared to other technologies. Porous structures of various viscosities were formed, and their electrical and mechanical properties evaluated. Porous PDMS (3000 cP) was formed in a sponge-like three-dimensional porous structure, compared to PDMS formed by other viscosities. The elongation of porous PDMS (3000 cP) was increased by up to 30%, and the relative resistance changed to less than 1000 times with the maximum strain test. The relative resistance increased the initial resistance (R0) by approximately 10 times during the 1500-times repeated cycling tests with 30% strain. As a result, patch-type wearable devices based on soft materials can provide an innovative platform that can connect with the human skin for robotics applications and for continuous health monitoring.
Assuntos
Dimetilpolisiloxanos/química , Dimetilpolisiloxanos/síntese química , Viscosidade , Elasticidade , Humanos , Porosidade , Dispositivos Eletrônicos Vestíveis/tendênciasRESUMO
The present study aimed to report (1) the sequela of sinus floor elevation (SFE) in the posterior maxilla with severe sinus membrane thickening and an undiagnosed fungal colonization but a patent ostium and (2) a treatment course without implant removal. A 73-year-old woman underwent dental implant placement in the left posterior maxillary area. Although the patient was asymptomatic, severe sinus membrane thickening with Haller cells was observed on a radiographic examination, but the ostium was patent. After SFE and simultaneous implant placement, the patient developed acute sinusitis and was referred to an otolaryngologist. Functional endoscopic sinus surgery (FESS) was performed, resulting in resolution of the infection and salvage of the augmentation and the implant. The histopathologic examination revealed the fungal ball that could not be diagnosed on preoperative dental radiography. During the 2 years after the delivery of the final prosthesis, a significant reduction in membrane thickness was observed. The implants were functioning well. Clinicians should recognize fungal colonization as an etiology of sinus membrane thickening and provide proper pre- and postoperative management, including FESS.
Assuntos
Implantes Dentários , Levantamento do Assoalho do Seio Maxilar , Idoso , Implantação Dentária Endóssea , Feminino , Fungos , Humanos , Maxila/cirurgia , Seio Maxilar/cirurgia , OsteogêneseRESUMO
Severe atrophy of the maxillary anterior region may make implant placement difficult and, as a result, iatrogenic complications such as nasal floor perforation may occur. The purpose of the present case reports is to present radiographic and nasal endoscopic features in the anterior nasal floor when dental implants were inadvertently perforated into nasal cavities. Between 1996 and 2018, 4 patients recorded with anterior nasal floor perforation with dental implants were followed and reviewed with panoramic radiographs and cone-beam computerized tomography. Also, nasal endoscopic examinations were performed by one otolaryngologist. Four implants in 4 patients were included in this case report. All implants achieved osteointegration and survived for 5-23 years without clinical complications. Three implants did not show any mucosal thickening and only one had minor mucosal thickening as visible on the radiographs. Nasal endoscopy examinations revealed that 3 implants were covered with mucosa and one had threads exposed. Intraorally, only one had clinical signs of peri-implant mucositis. Dental implants that perforated into the anterior nasal floor did not show clinical, radiographic, and nasal endoscopic complications during the long-term follow-up period. Nasal endoscopy was a better diagnostic tool to evaluate the implants perforated into the nasal cavity than conventional panoramic or cone-beam computerized tomography.
Assuntos
Implantes Dentários , Levantamento do Assoalho do Seio Maxilar , Implantação Dentária Endóssea , Endoscopia , Seguimentos , Humanos , Maxila/cirurgia , Seio Maxilar/cirurgia , Cavidade NasalRESUMO
The aim of this case report was to report the course of treatment for advanced paranasal sinus infection triggered by peri-implantitis, managed using functional endoscopic sinus surgery (FESS), with outcomes. A nonsmoking male patient received sinus augmentation with implant placement on his left posterior maxilla 15 years ago. Possibly due to noncompliance to maintenance, peri-implantitis developed and progressed into the augmented bone area in the maxilla. Eventually, maxillary sinusitis occurred concomitantly with a spread of the infection to the other paranasal sinuses. Implant removal and intraoral debridement of inflammatory tissue were performed, but there was no resolution. Subsequently, FESS was performed, with removal of nasal polyp and sequestrum. After FESS, the patient's sinusitis resolved. Histologically, the sequestrum was composed of bone substitute particles, necrotic bone, stromal fibrosis, and a very limited cellular component. Two implants were placed on the present site, and no adverse event occurred for up to 1 year after the insertion of the final prosthesis. Peri-implantitis in the posterior maxilla can trigger maxillary sinusitis with concomitant infection to the neighboring paranasal sinuses. FESS should be considered to treat this condition.
Assuntos
Implantes Dentários , Sinusite Maxilar , Peri-Implantite , Implantes Dentários/efeitos adversos , Humanos , Masculino , Maxila , Seio Maxilar , Sinusite Maxilar/diagnóstico por imagem , Sinusite Maxilar/etiologia , Sinusite Maxilar/cirurgia , Peri-Implantite/diagnóstico por imagem , Peri-Implantite/etiologia , Peri-Implantite/cirurgiaRESUMO
The report is presenting a case of implant placement in the postoperative maxillary cyst (POMC) with a follow-up of 13 years. The POMC is a complication associated with various surgical interventions involving maxillary sinus diseases such as Caldwell-Luc operation, orthognathic surgery, and sinus grafting procedures. The lesion of POMC is believed to develop as a result of the changes of ciliated cells or the blockage of ostia inside the maxillary sinus. Two dental implants were placed near the lesion that was later confirmed to be POMC. Of the 2 dental implants placed, one was explanted and the other was successfully managed with surface debridement followed by guided bone regeneration. The removed specimen inclusive of the implant and surrounding tissue was evaluated with clinical photographs, radiographs, and histology and the findings are described in the paper.
Assuntos
Cistos , Implantes Dentários , Implantação Dentária Endóssea , Seguimentos , Humanos , Seio MaxilarRESUMO
BACKGROUND: Laparoscopic rectal cancer surgery with proper total mesorectal excision is a challenge for colorectal surgeons during trouble shooting. We used a beaded plastic urinary drainage bag hanger to encircle the rectum and clamp laparoscopic rectal transaction in this study. METHODS: Sixty-three patients with rectal cancer underwent laparoscopic radical rectal resection with curative intent between February 2015 and December 2015. Plastic beaded form urinary Foley catheter bag hanger was inserted intracorporeally via right lower 12-mm trocar, encircling the rectal tube distal to the rectal lesion followed by fastening. Thirty patients in the rectal resection group (28 laparoscopic, 2 robotic-assisted) using the commercial beaded plastic hanger for Foley catheter drainage were compared to 33 patients who underwent conventional laparoscopic rectal resection. RESULTS: Low anterior resection was performed for both groups. The Foley bag hanger group had less operation time (162.6 min vs. 187.3 min, p = 0.006) and fewer numbers of stapler cartilage (1.6 vs. 2.1, p = 0.001). CONCLUSIONS: Intracorporeal ligation of the rectum with a beaded plastic Foley catheter bag hanger could be used as a valuable method for rectal handling and transaction in laparoscopic rectal cancer surgery.
Assuntos
Laparoscopia/métodos , Neoplasias Retais/cirurgia , Reto/cirurgia , Tração/métodos , Idoso , Procedimentos Cirúrgicos do Sistema Digestório/métodos , Feminino , Humanos , Masculino , Pessoa de Meia-Idade , Duração da Cirurgia , Plásticos , Resultado do Tratamento , Cateterismo Urinário/instrumentaçãoRESUMO
Dialister pneumosintes and Slackia exigua are both obligatory anaerobe and known to be associated with periodontal diseases and other oral infection. We report a case of blood stream infection caused by D. pneumosintes and S. exigua. This occurred in a 78-year-old female patient that presented with general weakness and fever. We revealed that she had a periapical abscess. The blood culture was positive for D. pneumosintes and S. exigua; however, identifying them was challenging. Ultimately, 16S rRNA sequencing was used to identify the organisms. The patient recovered after being treated with ceftriaxone and clindamycin. To the best of our knowledge, this is the first report of bacteremia caused by mixed infection of D. pneumosintes and S. exigua.
Assuntos
Actinobacteria/genética , Bacteriemia/microbiologia , Infecções por Bactérias Gram-Negativas/microbiologia , Abscesso Periapical/microbiologia , Veillonellaceae/genética , Actinobacteria/efeitos dos fármacos , Actinobacteria/isolamento & purificação , Idoso , Antibacterianos/farmacologia , Antibacterianos/uso terapêutico , Bacteriemia/diagnóstico , Bacteriemia/terapia , Coinfecção , Feminino , Infecções por Bactérias Gram-Negativas/diagnóstico , Infecções por Bactérias Gram-Negativas/terapia , Humanos , Testes de Sensibilidade Microbiana , Abscesso Periapical/diagnóstico , Abscesso Periapical/terapia , RNA Ribossômico 16S/genética , Análise de Sequência de DNA , Resultado do Tratamento , Veillonellaceae/efeitos dos fármacos , Veillonellaceae/isolamento & purificaçãoRESUMO
To date, few studies have compared the effectiveness of topical silicone gels versus that of silicone gel sheets in preventing scars. In this prospective study, we compared the efficacy and the convenience of use of the 2 products. We enrolled 30 patients who had undergone a surgical procedure 2 weeks to 3 months before joining the study. These participants were randomly assigned to 2 treatment arms: one for treatment with a silicone gel sheet, and the other for treatment with a topical silicone gel. Vancouver Scar Scale (VSS) scores were obtained for all patients; in addition, participants completed scoring patient questionnaires 1 and 3 months after treatment onset. Our results reveal not only that no significant difference in efficacy exists between the 2 products but also that topical silicone gels are more convenient to use. While previous studies have advocated for silicone gel sheets as first-line therapies in postoperative scar management, we maintain that similar effects can be expected with topical silicone gel. The authors recommend that, when clinicians have a choice of silicone-based products for scar prevention, they should focus on each patient's scar location, lifestyle, and willingness to undergo scar prevention treatment.
Assuntos
Cicatriz/prevenção & controle , Géis de Silicone/administração & dosagem , Géis de Silicone/farmacologia , Cirurgia Plástica/métodos , Procedimentos Cirúrgicos Operatórios/efeitos adversos , Adulto , Idoso , Feminino , Humanos , Masculino , Pessoa de Meia-Idade , Período Pós-Operatório , Estudos Prospectivos , Distribuição Aleatória , Inquéritos e Questionários , Ferimentos e Lesões/terapia , Adulto JovemRESUMO
There have been many attempts for regeneration of peripheral nerve injury. In this study, we examined the in vivo effects of non-differentiated and neuronal differentiated adipose-derived stem cells (ADSCs) in inducing the neuronal regeneration in the Sprague-Dawley (SD) rats undergoing nerve defect bridged with the PCL nanotubes. Then, we performed immunohistochemical and histopathologic examinations, as well as the electromyography, in three groups: the control group (14 sciatic nerves transplanted with the PCL nanotube scaffold), the experimental group I (14 sciatic nerves with the non-differentiated ADSCs at a density of 7×10(5) cells/0.1 mL) and the experimental group II (14 sciatic nerves with the neuronal differentiated ADSCs at 7×10(5) cells/0.1 mL). Six weeks postoperatively, the degree of the neuronal induction and that of immunoreactivity to nestin, MAP-2 and GFAP was significantly higher in the experimental group I and II as compared with the control group. In addition, the nerve conduction velocity (NCV) was significantly higher in the experimental group I and II as compared with the control group (P=0.021 and P=0.020, respectively). On the other hand, there was no significant difference in the NCV between the two experimental groups (P>0.05). Thus, our results will contribute to treating patients with peripheral nerve defects using PCL nanotubes with ADSCs.
Assuntos
Regeneração Nervosa , Traumatismos dos Nervos Periféricos/cirurgia , Poliésteres/uso terapêutico , Transplante de Células-Tronco/métodos , Células-Tronco/citologia , Tecido Adiposo/citologia , Animais , Diferenciação Celular , Eletromiografia , Proteína Glial Fibrilar Ácida , Masculino , Nanotubos , Proteínas do Tecido Nervoso/imunologia , Nestina/imunologia , Condução Nervosa/fisiologia , Fosfoproteínas Fosfatases/imunologia , Ratos , Ratos Sprague-Dawley , Nervo Isquiático/lesões , Nervo Isquiático/cirurgia , Engenharia Tecidual/métodosRESUMO
Recently, injectable dermal fillers have become important alternatives to surgical procedures for the correction of facial wrinkles. Bovine collagen is the first approved material for filler injection, and several studies have shown its efficacy. However, the risk of developing an allergic reaction and xenogenic transmission of bovine spongiform encephalopathy remain among its disadvantages. In this randomized, double-blinded, split-face study, we compared the efficacy and safety of a porcine collagen filler (TheraFill®) with that of a bovine collagen filler (KOKEN®) for nasolabial fold correction. A total of sixty one patients with mild to severe nasolabial fold were randomized to receive TheraFill® and KOKEN® on contralateral sides of the face. During the 12-month follow-up period, improvement in the Wrinkle-Severity Rating Scale score was slightly higher in TheraFill® group than KOKEN® group, although the difference was not statistically significant. No serious adverse reactions were observed and both materials were tolerable in most cases. In conclusion, the long-term effect of TheraFill® on nasolabial fold correction was comparable to that of KOKEN®, and it may be a good alternative to bovine collagen filler.
Assuntos
Colágeno/uso terapêutico , Procedimentos Cirúrgicos Dermatológicos/métodos , Sulco Nasogeniano/cirurgia , Cirurgia Plástica/métodos , Adulto , Idoso , Animais , Materiais Biocompatíveis/uso terapêutico , Bovinos , Colágeno/efeitos adversos , Método Duplo-Cego , Face/cirurgia , Feminino , Seguimentos , Humanos , Injeções Intradérmicas , Masculino , Pessoa de Meia-Idade , Estudos Prospectivos , Envelhecimento da Pele , Suínos , Resultado do TratamentoRESUMO
Non-invasive human-machine interactions (HMIs) are expected to be promoted by epidermal tactile receptive devices that can accurately perceive human activities. In reality, however, the HMI efficiency is limited by the unsatisfactory perception capability of mechanosensors and the complicated techniques for device fabrication and integration. Herein, a paradigm is presented for high-throughput fabrication of multimodal epidermal mechanosensors based on a sequential "femtosecond laser patterning-elastomer infiltration-physical transfer" process. The resilient mechanosensor features a unique hybrid sensing layer of rigid cellular graphitic flakes (CGF)-soft elastomer. The continuous microcracking of CGF under strain enables a sharp reduction in conductive pathways, while the soft elastomer within the framework sustains mechanical robustness of the structure. As a result, the mechanosensor achieves an ultrahigh sensitivity in a broad strain range (GF of 371.4 in the first linear range of 0-50%, and maximum GF of 8922.6 in the range of 61-70%), a low detection limit (0.01%), and a fast response/recovery behavior (2.6/2.1 ms). The device also exhibits excellent sensing performances to multimodal mechanical stimuli, enabling high-fidelity monitoring of full-range human motions. As proof-of-concept demonstrations, multi-pixel mechanosensor arrays are constructed and implemented in a robot hand controlling system and a security system, providing a platform toward efficient HMIs.
Assuntos
Grafite , Dispositivos Eletrônicos Vestíveis , Humanos , Epiderme , Tato , Movimento (Física) , Elastômeros , Grafite/químicaRESUMO
A new type of water-soluble ionic cellulose was obtained by means of the dissolution of cellulose in dimethylimidazolium methylphosphite at elevated temperatures over 120 °C. FTIR spectroscopy, (1)H and (13)Câ NMR spectroscopy, and elemental analysis results revealed that the repeating unit of the water-soluble cellulose consists of a dialkylimidazolium cation and a phosphite anion bonded to cellulose. The degree of phosphorylation on the cellulose chain was between 0.4 and 1.3 depending on the reaction temperature and time. With an increasing degree of phosphorylation, water solubility was increased. Scanning electron microscopy and X-ray diffraction analyses revealed that the cellulose crystalline phase in the parent crystalline cellulose changed to an amorphous phase upon transformation into ionic cellulose. Thermogravimetric analysis showed the prepared phosphorylated cellulose was stable over 250 °C and a substantial amount of residue remained at 500 °C.
Assuntos
Celulose/química , Líquidos Iônicos/química , Espectroscopia de Ressonância Magnética , Solubilidade , Espectroscopia de Infravermelho com Transformada de Fourier , Temperatura , Água , Difração de Raios XRESUMO
Biphasic calcium phosphate (BCP) bioceramics composed of hydroxyapatite and ß-tricalcium phosphate have attracted considerable attention as ideal bone substitutes for reconstructive surgery, orthopedics, and dentistry, owing to their similar chemical composition to bone mineral and biocompatibility. The addition of trace elements to BCP bioceramics, such as magnesium (Mg), cerium (Ce), and silicon (Si), can alter the physicochemical and biological properties of the resulting materials. To improve the anti-inflammatory activity of a pure BCP scaffold, this study developed a simple wet chemical precipitation and gel-casting method to fabricate microporous BCP scaffolds containing Si or Ce. The BCP scaffolds exhibited interconnected microporous structures with uniform micropores and unequiaxed grains. No changes in the phase composition and microstructure of the scaffolds with the Si or Ce doping were observed. Conversely, Si or Ce doping into the BCP crystal lattice influenced the in vitro biological activity of the scaffolds and the bone-forming ability of the cells cultured on the BCP scaffolds. The results of biological activity assays demonstrated that Ce-BCP promoted cell proliferation and osteogenic differentiation more effectively than the other scaffolds. In particular, Ce-BCP significantly suppressed the expression of bone-active cytokines via the anti-inflammatory and anti-oxidative effects. Therefore, Si- or Ce-doped BCP scaffolds can contribute to providing a new generation of bone graft substitutes.
RESUMO
Saliva is a useful biomarker for diagnosing oral health conditions, including periodontal disease (PD). Smoking is a risk factor for PD. The aim of this systematic review was to summarize the salivary biomarkers associated with PD based on smoking status. A comprehensive search of the MEDLINE (via PubMed), EMBASE, Cochrane, SCOPUS, and Web of Sciences databases was conducted up to 1 January 2021 using key terms relevant to the topic of our research and Cochrane methodology and improved with searching a gray literature resource. The methodological quality of all included studies was assessed with the revised Quality Assessment of Diagnostic Accuracy Studies-2. Seven studies were included. Smokers had increased levels of malondialdehyde, sialic acid, salivary cortisol, salivary interleukin 1ß, albumin, tissue inhibitor of matrix metalloproteinase (TIMP), and the pyridinoline cross-linked carboxyterminal telopeptide of type I collagen (ICTP), as well as decreased levels of superoxide dismutase, activity of lactate dehydrogenase, activity of enzyme activity of ß-glucuronidase, uric acid, matrix metalloproteinase-8 (MMP-8)/TIMP-1 ratio, and combinations of MMP-8 and ICTP. However, mixed results were observed some studies in detecting glutathione peroxidase, MMP-8, and MMP-14. The results were interpreted with caution because of limitations in the number of included studies and the study design. Some salivary biomarkers are potentially useful in combination or alone for diagnosing PD. Methodological and systematic studies are needed to develop more effective biomarkers.
Assuntos
Metaloproteinase 8 da Matriz , Doenças Periodontais , Humanos , Doenças Periodontais/diagnóstico , Saliva , Biomarcadores , FumarRESUMO
Catalytic oxidation is a feasible method for remediating volatile organic compounds (VOCs), due to its lower energy consumption and mineralization of VOCs into H2O and CO2. Noble metal-based catalysts are preferred for the catalytic oxidation of VOCs because of their superior activity, but they are usually deactivated by thermal aging which sinters the metal particles. Here, we report that Pt-Pd/Al2O3 thermally aged at 700-900 °C in air showed enhanced catalytic activity for toluene oxidation in humid conditions. There were electronic and structural changes in the thermally aged Pt-Pd/Al2O3, as confirmed by numerous analyses. Both Pt and Pd existed in a metallic rather than oxidized state without additional reduction steps. The noble metal particles were assembled to form Pt-Pd alloy, in the form of isolated Pd atoms surrounded by Pt atoms. This specific alloy structure was found to be crucial to the observed enhancement in catalytic toluene oxidation at low temperature.