Genetic polymorphisms are involved in oral health-related quality of life in skeletal class III patients submitted to orthognathic surgery.

OBJECTIVE: This study aimed to evaluate whether sex and genetic polymorphisms impact the oral health-related quality of life (OHRQoL) preoperatively and the difference between preoperative and postoperative OHRQoL in skeletal Class III patients submitted to orthognathic surgery. MATERIALS AND METHODS: This longitudinal study consisted of ninety-nine patients with skeletal Class III malocclusion who required orthognathic surgery. The Oral Health Impact Profile-14 (OHIP-14) is a questionnaire used to assess the OHRQoL with a 5-point Likert-type scale, covering seven domains related to physical and psychosocial factors. The questionnaire was applied in the preoperative and postoperative periods, and the difference scores were calculated to assess the OHRQoL after orthognathic surgery. The DNA was extracted from oral mucosa cells to evaluate genetic polymorphisms in ANKK1, DRD2, ESR1, and ESR2 through real-time PCR. RESULTS: There was an improvement in all OHRQoL domains following orthognathic surgery (p < 0.05). In the preoperative evaluation, women presented worse OHRQoL (p < 0.05) than men. There was no statistical difference between sex and the OHRQoL after surgery (p > 0.05). When evaluating the polymorphisms and preoperative OHIP-14 scores, CT genotype patients for rs1800497 (ANKK1) had a worse perception of the physical pain domain than CC genotype (p = 0.026), and CC genotype patients for rs1256049 (ESR2) had a worse perception of the functional limitation domain than CT genotype (p = 0.002). In the analysis between polymorphisms and postoperative and preoperative difference scores, CT genotype patients for rs1256049 (ESR2) had a greater improvement in the perception of the physical pain domain than the CC genotype (p = 0.031). In rs6275 and rs6276 (DRD2), patients with the CC genotype worsened the perception of the functional limitation domain than the TT genotype (p = 0.045), and AA genotype patients worsened the perception of the functional limitation domain than GG genotype (p = 0.048) after surgery, respectively. In addition, patients with the CT genotype for rs1800497 (ANKK1) had a greater improvement of OHRQoL perception in the total scale than the TT genotype (p = 0.018), and CT genotype patients had a greater improvement in the perception of function limitation domain than TT genotype (p = 0.017). CONCLUSION: Women have a worse perception of OHRQoL in the preoperative period of orthognathic surgery. Furthermore, polymorphisms in the ANKK1, DRD2, and ESR2 genes could be involved with OHRQoL in the preoperative period and following orthognathic surgery. CLINICAL RELEVANCE: The knowledge of the genetic background concerning OHRQoL in skeletal class III patients would aid in clinical practice to screen for associated genetic factors and prevent OHRQoL deterioration, especially after orthognathic surgery, considering that patients' genetic profiles would soon be available.

Factors influencing implant and prosthesis survival in zygomatic implant-supported fixed rehabilitation: a retrospective study.

BACKGROUND: The aim of this retrospective study was to evaluate mid-term implant and prosthesis survival in patients with edentulous atrophic maxillae submitted to zygomatic implant-supported fixed rehabilitation and to identify possible related risk factors. METHODS: Data were collected from records of patients with edentulous atrophic maxillae, in good general health and who were rehabilitated by means of acrylic resin full-arch screw-retained prosthesis supported by at least one zygomatic implant, between the years of 2006-2017. Implant and prosthesis survival rates were calculated. The association between implant and prosthesis loss and quantitative and qualitative variables of interest was verified with t tests and Fisher's exact tests, respectively. For the significant variables in the latter, odds ratio and 95% confidence intervals were additionally calculated. RESULTS: The sample comprised 66 patients in whom 171 zygomatic implants were placed to support maxillary screw-retained full-arch prostheses. Implant and prosthesis survival rates of 94.15% and 92.4%, respectively, were observed in a mean of 3.6 years of follow-up (up to 11.7 years). Implant loss was 4.33 more likely to occur when adverse events were recorded after the procedure of implant placement (P = 0.026) and 10.31 more likely to occur in implants that had their prosthesis repaired during follow-up visits (P = 0.004). Prosthesis loss was 22.00 times more likely to occur when implants were previously lost (P < 0.001). All prostheses that were considered as failures (i.e. were replaced) had been previously submitted to laboratory repair at some point during follow-up. CONCLUSIONS: Zygomatic implant rehabilitation demonstrated to be a reliable method with good mid-term results. The occurrence of post-surgical adverse events and need for laboratory repair of the prosthesis were found to be significant risk factors for implant loss. Previous implant loss was significantly associated with prosthesis loss. These risk factors may be prevented by means of detailed planning of the rehabilitation to be carried out, including post-operative care of the patients, so that treatment success using zygomatic implants can be achieved.

Does the Length of Dental Implants Inserted in Areas of Inferior Alveolar Nerve Lateralization Interfere on Mandibular Resistance to Fracture?

The aim of this study was to compare, in vitro, the mechanical resistance to vertical displacement of the mandible after osteotomy for lateralization of the inferior alveolar nerve and installation of dental implants. One hundred eighty polyurethane mandibles were equally divided into 6 groups: G1-intact hemi-mandibles (control group), G2-hemi-mandibles after osteotomy for lateralization of the inferior alveolar nerve, G3-hemi-mandibles with installation of 3 bicortical dental implants (3.75 × 13 mm), G4-hemi-mandibles with installation of 3 dental implants that did not reach the basal cortical bone (3.75 × 11 mm), G5-hemi-mandibles after osteotomy for lateralization of the inferior alveolar nerve and installation of 3 bicortical dental implants (3.75 × 13 mm) and G6-hemi-mandibles after osteotomy for lateralization of the inferior alveolar nerve and installation of 3 dental implants that did not reach the basal cortical bone (3.75 × 11 mm). The specimens were subjected to linear loading tests. The highest mean value of maximum load was found in G1 (412.36N ±â€Š11.99), followed by G2 (396.87N ±â€Š23.94), G3 (319.63N ±â€Š57.28), G4 (303.34N ±â€Š18.25), G5 (231.75N ±â€Š63.64) and G6 (228.13N ±â€Š20.75). Based on this data, it can be concluded that the bicorticalization (or not) of the implants was not a statistically significant risk factor for the vertical displacement of polyurethane hemi-mandibles.

Bonegraft Wrap Technique: Avoiding Accentuated Labiomental Groove After Genioplasty.

This work presents the wrap technique developed by the authors aiming to avoid the occurrence of unaesthetic deep labiomental fold in genioplasty. The technique recommends the use of particulate bone graft that is wrapped on collagen or a Surgicel membrane which is placed over the osteotomized segment of the chin fixated with a prebent 4-hole titanium plate.

Atypical Mandibular Angle Fracture.

The mandibular fracture takes the second position among facial bones fractures, with significant increase of cases in the last years. The aim of this paper is to report a clinical case of a patient with facial trauma due to an automotive accident, resulting in an atypical fracture in a unilateral mandibular angle. In the image examinations an atypical favorable fracture in the right mandibular angle region involving the apex of the erupted 48 tooth was found. The fracture line started in the posterior region of mandibular ramus, below mandibular condyle, and spread out until inferior border of the mandible in premolar region. Despite the atypical design of the mandibular angle fracture described in this paper, the treatment showed satisfactory results, without any aesthetic or functional changes for the patient.

Large Anterior Oronasal Fistula Repair Using Pedicled Buccal Fat Pad and Fibroepithelial Tissue.

Oronasal fistula (ONF) is the most common complication after palatoplasty in patients with cleft lip and palate (CLP). When left untreated, it may negatively affect the quality of life, leading to development of other comorbidities. This study reports for the first time, the use of a portion of a hyperplasic tissue associated with pedicled buccal fat pad flap to repair a large anterior ONF in a 60-year-old man. The hyperplasic tissue may have developed due to the combination of a loose fitting upper denture and long-term use of dihydropyridine calcium channel blocker (amlodipine besylate). There is controversy in the literature about use of pedicled buccal fat pad flap in the anterior region. However, in this study, we report successful repair of a large anterior ONF using a portion of a fibroepithelial hyperplasic tissue associated with pedicled buccal fat pad flap.

Surgical Resolution of Bilateral Hypertrophy of Masseter Muscle Through Intraoral Approach.

Masseter muscle hypertrophy is an untypical anomaly with no definite cause and its diagnosis is easily completed through physical examination and imaging examinations. In some cases, patient may report signs and symptoms of well-localizated pain. However, it is generally asymptomatic and patient's chief complaint is about esthetic because of facial asymmetry. In this case, surgery is carefully indicated. The aim of this article is to report a case of a male patient with no painful and functional complaints but an important unease over his facial asymmetry. Patient underwent surgery involving bilateral resection of mandibular angles and unilateral resection of masseter muscle through intraoral approach. Surgical approaches and techniques rely heavily on surgeon. There are few reports in the literature about this anomaly, but those available present several techniques. The surgeon's dexterity and knowledge become extremely important, whereas this procedure is essentiallyesthetic.

Sandwich Osteotomies to Treat Vertical Defects of the Alveolar Ridge.

PURPOSE: To evaluate the vertical bone gain after osteotomy sandwich. MATERIALS AND METHODS: Fourteen patients (mean age, 41 years) underwent 17 procedures of osteotomy sandwich. Of these 17 procedures, 15 involved reconstructive surgery and 2 involved the repositioning of implants. The patients were submitted to computed tomography before the surgical procedure and 4 months after the completion of the graft, with measurements taken to assess the vertical gain that had been achieved. RESULTS: The results confirmed a satisfactory vertical gain in all cases (mean, 5.12 mm). The use of autogenous graft or biomaterial particles (in isolation) between the osteotomized segments proved to be viable. Three patients reported postoperative paresthesia, which healed spontaneously after 3 months. One patient exhibited dehiscence due to not following the postoperative recommendations. Forty implants were installed in the grafted regions, and 2 implants were repositioned. CONCLUSION: The technique of sandwich osteotomy was found to be effective for height gain, and different materials can be used between the osteotomized segments.

Use of resorbable screws for autogenous onlay block graft fixation: a histological analysis in rabbits.

The aim of the present in vivo study is to histologically evaluate and compare the use of resorbable screws based on poly(L-co-D,L lactide) 70:30 for fixation of autogenous bone grafts in rabbit tibiae. As control group, titanium (Ti-6Al-4V Grade V) screws were used. For this purpose, 15 white New Zealand male rabbits, aged 6 months and weighing between 3.8 and 4.5 kg, were used. From each animal, 2 total-thickness bone grafts were removed from the cranial vault: one was stabilized with a resorbable screw while the other was stabilized with a metallic one. Animals were divided into 3 groups, according to the sacrifice period: 3, 8, and 16 weeks postoperatively. After histological processing, cuts were stained with hematoxylin and eosin and submitted for descriptive histological analysis under light microscopy. It was found that the fixation system based on the polymer showed a histological behavior similar to metallic screws. For both groups, the bone graft was incorporated, with the presence of bone formation between the graft and receptor site. In none of the groups were undesirable inflammatory responses or foreign body reactions observed. Based on histological findings and on this experimental model, it is possible to conclude that the internal fixation system based on the poly(L-co-D,L lactide) 70:30 polymer is effective for fixation of autogenous bone grafts, with results that are comparable to the titanium fixation system.

Analysis of incision effects on upper lip height and thickness after maxillary surgically assisted expansion: a randomized clinical trial.

PURPOSE: To evaluate changes from maxillary circumvestibular incision performed with a #15 scalpel blade versus electrocautery on the height and thickness of the upper lip (UL) after surgically assisted maxillary expansion. MATERIALS AND METHODS: Twenty-three patients who underwent surgically assisted maxillary expansion for transverse maxillary deficiency from April 2011 through April 2012 were included in the study. In group 1 (n = 11), the incision was performed with a Bard-Parker #15 scalpel blade. In group 2 (n = 12), the incision was performed with monopolar electrocautery (blend function, 1; power, 20 Watts; frequency, 480 kHz). Clinical measurements for UL height and radiographic measurements for UL height and thickness were performed preoperatively and postoperatively (mean, 6 months). The collected data were subjected to statistical analysis to test the hypotheses of the study. RESULTS: After excluding 2 patients, 21 patients were included in the sample. For UL height, clinical and radiographic measurements showed shortening of the UL, and the differences between pre- and postoperative values were statistically significant (P < .05) in the 2 groups. However, there was no statistically significant difference between groups 1 and 2 for UL height (P > .05) by clinical or radiographic measurements. For UL thickness, the 2 groups showed slight UL thickening in the lower portion, with no statistical difference between pre- and postoperative values (P > .05). Moreover, these results were not statistically different between the 2 groups (P = .754). In the uppermost portion of the UL, there was significant thinning in group 2 (P = .001), but not in group 1 (P = .076), and no statistical difference between groups (P = .535). CONCLUSIONS: Maxillary circumvestibular incision causes significant shortening of the UL and thinning of the uppermost portion when using a #15 scalpel blade or electrocautery. However, there is no difference in UL dimensional changes when using either technique for maxillary circumvestibular incision.

Bone repair is influenced by different particle sizes of anorganic bovine bone matrix: a histologic and radiographic study in vivo.

PURPOSE: The aim of this study was to analyze histologically and radiographically the influence of particle size of anorganic bovine bone matrix (ABBM) on bone repair. MATERIALS AND METHODS: Four calvarial defects of 8 mm each were prepared in 18 adult New Zealand rabbits. The defects were then filled with either particulate autogenous bone (control group) or ABBM of large, medium, and small size granules. The animals were sacrificed at 15, 30, and 60 days after surgery. The samples were radiographically examined before being submitted to histological processing. RESULTS: Autogenous bone showed a slight radiopacity at the beginning, which was increased at the final period, being very similar to the adjacent bone tissue. The large and medium size ABBM particles maintained the same radiographic behavior, showing a radiolucent area in the central portion of the defect at 60 days. ABBM of small size granules showed a slight radiolucity at the initial period, which was increased at the subsequent periods. More intense bone formation occurred in the control group (autogenous bone). All 3 particle sizes of the biomaterial resulted in inflammatory infiltration at 15 and 30 days. ABBM of small size granules lead to a greater amount of osteoid tissue, and the particles were almost totally reabsorbed within 60 days of implantation. CONCLUSIONS: Autogenous bone graft lead to the best result in terms of bone defect repair; ABBM of large and medium size granules are not totally reabsorbed at the observed period; ABBM of small size granules was more intensively reabsorbed and led to a greater osteoid tissue formation when compared to the medium and large ABBM granules.

A randomised trial of the bone formation after maxillary sinus floor augmentation with bovine hydroxyapatite (Cerabone®) and Photobiomodulation: histomorphometric and immunohistochemical analysis.

Background: The use of non-autogenous biomaterial to increase bone height in the maxillary sinus has been shown to be effective, but the results are still inconclusive. Material and Methods: Eight participants were selected and included in the research. After surgical access with osteotomy on the lateral wall of both maxillary sinuses, these were filled with Cerabone®. Then, by blind randomization, they received one of the following treatments: Filling with Cerabone® (Control group); treatment with Photobiomodulation (PBM), filling with Cerabone® and treatment with low-power laser (PBM group). Biopsies were obtained 30 days after the surgery, using a 2.8 mm internal diameter trephine bur. Qualitative and quantitative histological analyzes were performed and immunohistochemical analyzes of osteocalcin (OCN) and tartrate-resistant acid phosphatase (TRAP) were performed with scores for each of the biological events. Results: The Cerabone® biomaterial demonstrated a high degree of biocompatibility. New bone formation was observed in both groups. In the PBM group, there was greater bone formation and newly formed tissue in an advanced state of bone maturation. The immunostaining of OCN was greater at 30 days in the PBM group than in the control. There was no significant difference in TRAP immunostaining at 30 days between the groups. Conclusions: Low-power laser-mediated by PBM promoted greater bone formation; the newly formed tissue showed a more advanced state of bone maturation in maxillary sinuses filled with Cerabone® biomaterial and treatment with PBM, within the 30-day evaluation period. Key words:Sinus floor augmentation, dental implants, bone and bones, low-level light therapy.

Body mass index and weight loss in patients submitted to orthognathic surgery: a prospective study.

OBJECTIVE: To compare the body mass index (BMI) and the weight loss (WL) in patients with dentofacial deformities who underwent monomaxillary versus bimaxillary orthognathic surgery. MATERIALS AND METHODS: This prospective longitudinal study included 69 patients with dentofacial deformities who underwent surgical orthodontic treatment. Patients were divided into two groups according to the type of orthognathic surgery: monomaxillary or bimaxillary. A preoperative nutritional assessment based on BMI was performed; the percentage of involuntary WL between the preoperative and postoperative periods was also calculated. Data were collected at preoperative and 10, 40, and 90 days postoperative (PO). Statistical analysis was performed using SPSS 17.0 (IBM Corp., Armonk, NY, USA), and data are reported with 95% confidence interval. RESULTS: According to BMI, patients who underwent monomaxillary surgery presented: underweight = 2.6%, normal weight = 51.3%, overweight = 35.9%, and obese = 10.3%. The subjects who underwent bimaxillary surgery presented: normal weight = 43.3%, overweight = 36.7%, and obese = 20%. BMI was similar between the groups at all time points (preoperative, p= 0.237; 10 days PO, p= 0.325; 40 days PO, p= 0.430; and 90 days PO, p= 0.609). All patients lost weight postoperatively, and WL was similar among the PO measurements (p= 0.163). CONCLUSIONS: Although both monomaxillary and bimaxillary orthognathic surgeries resulted in WL and lower BMI, there was no statistically significant difference in these metrics between the two types of surgery.

Septic arthritis of the temporomandibular joint.

Septic arthritis of the temporomandibular joint is a rare acute infectious disease that requires attention from physicians and, once misdiagnosed, can have several implications for a patient. The most common microorganisms related to this disease are Staphylococcus aureus, Neisseria, Haemophilus influenzae, and Streptococcus. The infection of the joint may be caused by a direct spread of a local infection or by hematogenous inoculation from a distant focus. General predisposing factors, such as immunodepression, can eventually be found. The aim of the current study was to report a case in which a patient with an articular infection resulting from hematogenous dissemination from a distant site was successfully treated using joint drainage and systemic antibiotics. Secretion culture from the temporomandibular joint space was positive for S. aureus. After 1 month of antimicrobial therapy, the patient was asymptomatic and mandibular function was normal. Literature related to this topic was reviewed and discussed.

Assessment of Resorbable and Non-resorbable Fixation Systems in Sagittal Split Ramus Osteotomy: An In vitro Study.

Objective: The internal fixation has been purpose of study for many years, but there is still no consensus on the best method of fixation in relation to resistance for bilateral sagittal split ramus osteotomy (BSSO) using plates. Therefore, the aim of this study was to assess five different methods of osteosynthesis using resorbable and non-resorbable plates and screws in simulated sagittal split osteotomy (SSO) of the mandibular ramus. Materials and Methods: SSO was performed in 25 polyurethane synthetic mandibular replicas. The distal segments were moved forward 5 mm, and the specimens were grouped according to the fixation method: Inion resorbable plate, KLS resorbable plate, standard four-hole titanium miniplate (Medartis), two standard four-hole titanium miniplates (Medartis) and an adjustable titanium miniplate (Slider/Medartis). Mechanical evaluation was performed by applying compression loads to first molar using an Instron universal testing machine up to a 5 mm displacement of the segments. Resistance forces were obtained in Newtons (N), and statistical analysis was performed using the software R v. 3.5 with significance level of 0.05. Linear mixed models were used to compare the force required to move each type of plate. Results: The results showed that the resistance of SSO was better accomplished using two titanium miniplates and KLS resorbable plate showed the least resistance. However, both titanium and resorbable plates behaved similarly in small displacements, which are most commonly observed in BSSO postoperative time. Conclusion: It can be concluded that both resorbable and non-resorbable systems might offer suitable mechanical resistance in the procedures where there are no mechanical postoperative complications.

Incidence of maxillary sinusitis following Le Fort I osteotomy: clinical, radiographic, and endoscopic study.

PURPOSE: The correction of maxillomandibular deformities may require maxillary osteotomy procedures that usually present low rates of postoperative complications, such as maxillary sinusitis. The present study evaluated the incidence of maxillary sinusitis after Le Fort I osteotomy in 21 adult patients who underwent maxillary surgery (Le Fort I osteotomy) or bimaxillary surgery (Le Fort I osteotomy plus sagittal mandibular osteotomies) for correction of dentofacial deformities. PATIENTS AND METHODS: Verification of the presence of maxillary sinusitis was assessed through a brief questionnaire, x-rays (Waters views), and nasal endoscopy before surgery and 6 to 8 months after surgery. RESULTS: Analysis of results showed an incidence of 4.76% of maxillary sinusitis as a postoperative complication in the studied population. CONCLUSION: Symptomatic patients with a positive radiographic finding or an increased risk for postoperative sinusitis will benefit from endoscopic evaluation to aid in treatment planning and follow-up.

Mineralized tissue formation associated with 2 different dental implant designs: histomorphometric analyses performed in dogs.

The clinical success of dental implants might be associated with such factors as installation technique, implant shape, size, material, and screw threads. Therefore, the aim of this study is to analyze mineralized tissue formation on the screw threads of conical and cylindrical dental implants. This study includes 7 beagle dogs that had the lower premolars extracted. Three months after bone and soft tissue repair, 2 different designs of dental implants (1 conical and 1 cylindrical) were installed in each hemimandible using a nonsubmerged technique. Both implants when installed had different shape and thread, as revealed by scanning electron microscopy. Six weeks after implant installation, animals were killed and submitted to histomorphometric analysis. Cervical, middle, and apical areas were analyzed. Statistical analysis was carried out using Student t test at a significance level of P < .05. Statistically significant differences were not found between the conical and cylindrical implants. The conical implants presented fewer threads, a smaller area, and more bone formation when compared with the cylindrical ones, without significant differences (P  =  .1226). The highest values concerning bone formation were observed for the cervical area (P  =  .4005), and the lowest for the apical area (P  =  .1899); however, no statistically significant difference was observed. In conclusion, no statistically significant difference was observed in thread bone formation between the cylindrical and conical implant designs when placed using the nonsubmerged technique.

Use of Lasers and Piezoelectric in Intraoral Surgery.

Laser therapy has been delivering good results for more than 30 years. Therapeutic effects are seen due to its ability to stimulate cell proliferation, revascularization, cell regeneration, local microcirculation, and vascular permeability; leading to edema reduction and analgesic effects. The piezoelectric system has been used in several surgeries recently, following the trend of minimally invasive surgery. The system consists of crystals undergoing deformation when exposed to electric current, resulting in an oscillating movement with ultrasound frequency. In oral surgery it is used in orthognathic and temporomandibular joint procedures, alveolar corticotomies, tumor excision, bone grafts, third molars, and dental implants.

Reconstruction of severely resorbed maxilla with biodegradable polylactide screws: case series.

PURPOSE: After the loss of natural teeth, bone changes in the jaws begin to take place immediately. Because the alveolar bone no longer responds to stresses placed in this area by teeth and periodontal ligaments, the bone begins to resorb. In such cases, alveolar bone reconstruction followed by implant-prosthetic treatment must be considered to reestablish esthetics and function. The present study was designed to compare and evaluate the effectiveness of titanium screws and absorbable fixation systems for the fixation of autogenous onlay bone grafts in maxillary reconstruction. MATERIALS AND METHODS: A total of 10 consecutive patients with severely resorbed maxillae were referred to the Oral and Maxillofacial Surgery Department at Piracicaba Dental School, Campinas State University (Sao Paulo, Brazil), for oral rehabilitation through implant placement. The bone defects were treated by autologous bone grafting from the iliac crest, which was fixed with absorbable screws. The patients were followed for a minimum of 6 months after prosthodontic work was concluded. RESULTS: The average age of the patients in this study was 46.9 years. Two dental implants were lost during the healing period. Four absorbable screws showed an unusual tissue reaction and were lost, and 90% of patients received the planned fixed prostheses. The implant success rate was 97% at 1 year after prosthesis placement. CONCLUSION: Fixation with absorbable screws has been shown to be safe and predictable. The absorbable screws did not interfere with bone graft healing and dental implant osseointegration.