Bioinspired nanogels as cell-free DNA trapping and scavenging organelles for rheumatoid arthritis treatment.

Excessive cell-free DNA (cfDNA) in the serum and synovium is considered a causative factor of rheumatoid arthritis (RA). Thus, cfDNA scavenging by using cationic polymers has been an effective therapeutic avenue, while these stratagems still suffer from systemic toxicity and unstable capture of cfDNA. Here, inspired by the biological charge-trapping effects and active degradation function of enzyme-containing organelles in vivo, we proposed a cationic peptide dendrimer nanogel with deoxyribonuclease I (DNase I) conjugation for the treatment of RA. Benefitting from their naturally derived peptide components, the resultant nanogels were highly biocompatible. More attractively, by tailoring them with a larger size and higher surface charge density, these cationic nanogels could achieve the fastest targeting capability, highest accumulation amounts, longer persistence time, and superior DNA scavenging capacity in inflamed joints. Based on these features, we have demonstrated that the organelle mimicking cationic nanogels could significantly down-regulate toll-like receptor (TLR)-9 signaling pathways and attenuate RA symptoms in collagen-induced arthritis mice. These results make the bioinspired DNase I conjugated cationic nanogels an ideal candidate for treating RA and other immune dysregulation diseases.

Percutaneous retrieval of a dislocated LAmbre left atrial appendage occluder in a canine model.

BACKGROUND: Dislocated left atrial appendage (LAA) occluders can be retrieved by percutaneous intervention when performing device embolization into the left atrium (LA), aorta (AO), or left ventricle (LV). However, few reports exist regarding LAmbre LAA occluder dislocation. OBJECTIVE: The study was aimed to explore the outcome of retrieving dislocated LAmbre LAA occluder. METHODS: Sixteen healthy dogs received LAmbre implants. After implantation of an occlusion device (not released), the occlusion device was completely retrieved. Subsequently, the device was released in the LA, resulting in the dislocation of the device. Angiography and transesophageal echocardiography (TEE) were performed to check the occluders position. Disposable grasping rat-tooth forceps were used to percutaneously retrieve the LAA occluder. RESULTS: All the 16 dogs were successfully implanted with the LAmbre LAA occluder and the success rate was 100%. After the occluder was released, TEE and angiography confirmed that the device was located in the LA in eight cases (50%), in the AO in five cases (31%), and in the LV in three cases (19%). One subject died due to cardiogenic shock before the retrieval procedure was complete as the device fell into the LV. Two cases of device-related aortic valve injury occurred during the retrieval procedure when the device was located in the LV. No complications were observed when the device was located in the LA or AO. CONCLUSIONS: Device retrieval is feasible in most cases. However, potentially lethal complications may occur once the device is dislocated into the LV/AO.

Intestinal obstruction secondary to perforation of Meckel's diverticulum caused by dentures: a case report and review of literature.

BACKGROUND: Meckel's diverticulum (MD) is the most common congenital abnormality of the gastrointestinal tract. However, MD is rare in clinical practice, and perforation of a MD by a foreign body is even rarer. Preoperative diagnosis is difficult because there is often insufficient information; therefore it is usually diagnosed intraoperatively. Although rare, it should be considered as a differential diagnosis in patients who have ingested foreign bodies. CASE PRESENTATION: The following is the case of a 52-year-old female patient who was admitted because of generalized abdominal pain for 5 days, related to nausea and vomiting. She also stopped passing gas. Inflammatory indicators were elevated, and computed tomography (CT) revealed gas-liquid levels in the small intestine and high-density objects in the ileum. Based on the patient's condition, laparotomy was performed instead because the laparoscopic procedure was difficult to perform. Intraoperatively, a foreign body perforated the diverticulum of the terminal ileum, resulting in the development of an abdominal abscess. Finally, we performed resection of the ileal diverticula and partial resection of the ileum. After the surgery, it was confirmed that the foreign bodies were two dentures accidentally eaten by the patient. CONCLUSION: A thorough understanding of the clinical presentation, imaging features, and treatment of MD and its complications will assist clinicians in making prompt and accurate diagnoses and providing symptomatic treatment.

Structural Color Medical Patch with Surface Dual-Properties of Wet Bioadhesion and Slipperiness.

Developing a self-reporting bioadhesive patch that has strong adhesion to the wet tissues and meanwhile can avoid adhering to the adjacent tissues is a current research difficulty and challenge. In this paper, inspired by the wet adhesion of spider web, slippery surface of Nepenthes, and structural color phenomena of chameleons, a novel structural color medical patch with surface dual-properties of wet bioadhesion and slipperiness for internal tissue repair based on inverse opal scaffold is presented. The adhesive surface made by poly(acrylic acid)-polyethylene glycol-N-hydroxysuccinimide ester and gelatin hydrogel can attain tough adhesion to internal wet tissues by absorbing tissue interfacial water and the covalent cross-linking between the hydrogel and tissue. Besides, the slippery surface made by liquid paraffin infused inverse opal scaffold can avoid adhesion to the adjacent tissues. It is demonstrated that the designed patch can adhere tightly to the defect tissue and improve the tissue repair without adjacent adhesion when applied in a rat model with full-thickness perforation of the stomach wall. In addition, the responsive structural color can supply a color-sensing monitoring to evaluate the adhesive and repair process. These features impart the bioinspired patch with great scientific significance and broad clinical application prospects.

Fiber reinforced GelMA hydrogel to induce the regeneration of corneal stroma.

Regeneration of corneal stroma has always been a challenge due to its sophisticated structure and keratocyte-fibroblast transformation. In this study, we fabricate grid poly (ε-caprolactone)-poly (ethylene glycol) microfibrous scaffold and infuse the scaffold with gelatin methacrylate (GelMA) hydrogel to obtain a 3 D fiber hydrogel construct; the fiber spacing is adjusted to fabricate optimal construct that simulates the stromal structure with properties most similar to the native cornea. The topological structure (3 D fiber hydrogel, 3 D GelMA hydrogel, and 2 D culture dish) and chemical factors (serum, ascorbic acid, insulin, and ß-FGF) are examined to study their effects on the differentiation of limbal stromal stem cells to keratocytes or fibroblasts and the phenotype maintenance, in vitro and in vivo tissue regeneration. The results demonstrate that fiber hydrogel and serum-free media synergize to provide an optimal environment for the maintenance of keratocyte phenotype and the regeneration of damaged corneal stroma.

Molecular dynamics simulations of film rupture in water/surfactant systems.

Molecular dynamics simulation has been performed on water/surfactant film rupture in order to investigate foam stability. A periodic boundary film model which was simulated in a lateral dimension of 8 x 8 nm(2) for 4 ns was established to stand for a part of a foam bubble. On the basis of critical film thickness, which is the lowest thickness before film rupture, a stability index was calculated to describe the capabilities of surfactants to stabilize water films. We investigated the influence of film size and simulation duration on the critical thickness and proved that our model is reasonable. The stability index versus surfactant concentration curve suggests that the capabilities of three surfactants-linear alkylbenzene sulfonate (LAS), sodium dodecyl sulfate (SDS), and heptaethylene glycol monododecyl ether (C(12)E(7))-in stabilization of water film decrease in the order of SDS > LAS > C(12)E(7). In the present study, the simulated results have been validated by the foam generation and decay experiment results, thus indicating that this method of predicting the stability of water/surfactant film is feasible.

Preparation and the influencing factors of timozolomide liposomes.

To prepare timozolomide liposomes for administration through nasal mucous membrane, we studied the factors of the preparation of the liposomes. The timozolomide liposomes were prepared by the ammonium sulphate gradient method; electroscopy and laser particle analyzer were utilized to determine the conformation, size and distribution of timozolomide liposomes; high performance liquid chromatography (HPLC) was applied to determine the entrapping efficiency of timozolomide liposomes; then we studied the influences of the concentration of ammonium sulphate solution, temperature, and the drug-to-lipid ratio on the entrapping efficiency. The average size of timozolomide liposomes was 185 nm; the entrapping efficiency was 90.3%. The entrapping efficiency was enhanced with the increasing of the concentration of ammonium sulphate solution and the rising of temperature, and decreased with the increasing of the drug-to-lipid ratio. The timozolomide liposomes with high entrapping efficiency, small and even particle sizes could be prepared by the simple and convenient ammonium sulphate gradient method. The primary influencing factors on the entrapping efficiency of timozolomide liposomes were the concentration of ammonium sulphate solution, the temperature, and the drug-to-lipid ratio.

Tissue-engineered cornea constructed with compressed collagen and laser-perforated electrospun mat.

While Plastic Compressed (PC) collagen technique is often used to fabricate bioengineered constructs, PC collagen gels are too weak to be sutured or conveniently handled for clinical applications. To overcome this limitation, electrospun poly (lactic-co-glycolide) (PLGA) mats, which have excellent biocompatibility and mechanical properties, were combined with PC collagen to fabricate sandwich-like hybrid constructs. By laser-perforating holes with different sizes and spacings in the electrospun mats to regulate the mechanical properties and light transmittance of the hybrid constructs, we produced hybrid constructs with properties very suitable to apply in corneal tissue engineering. The maximum tensile stress of the optimal hybrid construct was 3.42 ± 0.22 MPa. The light transmittance of the hybrid construct after perforation was approximately 15-fold higher than before, and light transmittance increased gradually with increasing time. After immersing into PBS for 7 days, the transmittance of the optimal construct changed from 63 ± 2.17% to 72 ± 1.8% under 500 nm wavelength. The live/dead staining, cell proliferation assay and immunohistochemistry study of human corneal epithelial cells (HCECs) and human keratocytes (HKs) cultured on the optimal hybrid construct both demonstrated that the cells adhered, proliferated, and maintained their phenotype well on the material. In addition, after culturing for 2 weeks, the HCECs could form stratified layers. Thus, our designed construct is suitable for the construction of engineered corneal tissue.

Synthesis and characterization of citrate-based fluorescent small molecules and biodegradable polymers.

Novel citric acid based photoluminescent dyes and biodegradable polymers are synthesized via a facile "one-pot" reaction. A comprehensive understanding of the fluorescence mechanisms of the resulting citric acid-based fluorophores is reported. Two distinct types of fluorophores are identified: a thiozolopyridine family with high quantum yield, long lifetime, and exceptional photostability, and a dioxopyridine family with relatively lower quantum yield, multiple lifetimes, and solvent-dependent band shifting behavior. Applications in molecular labeling and cell imaging were demonstrated. The above discoveries contribute to the field of fluorescence chemistry and have laid a solid foundation for further development of new fluorophores and materials that show promise in a diversity of fluorescence-based applications. STATEMENT OF SIGNIFICANCE: Photoluminescent materials are pivotal for fluorescence based imaging, labeling and sensing applications. Understanding their fluorescence mechanism is challenging and imperative. We develop a new class of citric acid-derived fluorescent materials in forms of polymers and small molecular dyes by a one-step solvent free reaction. We discovered two different classes of citric acid-derived fluorophores. A two-ring thiozolopyridine structure demonstrates strong fluorescence and exceptional resistance to photo-bleaching. A one-ring dioxopyridine exhibits relative weak fluorescence but with intriguing excitation and solvent-dependent emission wavelength shifting. Our methodology of synthesizing citric acid-derived fluorophores and the understanding on their luminescence are instrumental to the design and production of a large number of new photoluminescent materials for biological and biomedical applications.

Bioprinting three-dimensional cell-laden tissue constructs with controllable degradation.

Alginate hydrogel is a popular biologically inert material that is widely used in 3D bioprinting, especially in extrusion-based printing. However, the printed cells in this hydrogel could not degrade the surrounding alginate gel matrix, causing them to remain in a poorly proliferating and non-differentiating state. Here, we report a novel study of the 3D printing of human corneal epithelial cells (HCECs)/collagen/gelatin/alginate hydrogel incubated with a medium containing sodium citrate to obtain degradation-controllable cell-laden tissue constructs. The 3D-printed hydrogel network with interconnected channels and a macroporous structure was stable and achieved high cell viability (over 90%). By altering the mole ratio of sodium citrate/sodium alginate, the degradation time of the bioprinting constructs can be controlled. Cell proliferation and specific marker protein expression results also revealed that with the help of sodium citrate degradation, the printed HCECs showed a higher proliferation rate and greater cytokeratin 3(CK3) expression, indicating that this newly developed method may help to improve the alginate bioink system for the application of 3D bioprinting in tissue engineering.

Tungsten oxide nanorods: an efficient nanoplatform for tumor CT imaging and photothermal therapy.

We report here a facile thermal decomposition approach to creating tungsten oxide nanorods (WO2.9 NRs) with a length of 13.1 ± 3.6 nm and a diameter of 4.4 ± 1.5 nm for tumor theranostic applications. The formed WO2.9 NRs were modified with methoxypoly(ethylene glycol) (PEG) carboxyl acid via ligand exchange to have good water dispersability and biocompatibility. With the high photothermal conversion efficiency irradiated by a 980 nm laser and the better X-ray attenuation property than clinically used computed tomography (CT) contrast agent Iohexol, the formed PEGylated WO2.9 NRs are able to inhibit the growth of the model cancer cells in vitro and the corresponding tumor model in vivo, and enable effective CT imaging of the tumor model in vivo. Our "killing two birds with one stone" strategy could be extended for fabricating other nanoplatforms for efficient tumor theranostic applications.

Iron/iron oxide core/shell nanoparticles for magnetic targeting MRI and near-infrared photothermal therapy.

The development of photothermal agents (PTAs) with good stability, low toxicity, highly targeting ability and photothermal conversion efficiency is an essential pre-requisite to near-infrared photothermal therapy (PTT) in vivo. Herein, we report the readily available PEGylated Fe@Fe3O4 NPs, which possess triple functional properties in one entity - targeting, PTT, and imaging. Compared to Au nanorods, they exhibit comparable photothermal conversion efficiency (∼20%), and much higher photothermal stability. They also show a high magnetization value and transverse relaxivity (∼156 mm(-1) s(-1)), which should be applied for magnetic targeting MRI. With the Nd-Fe-B magnet (0.5 T) beside the tumour for 12 h on the xenograft HeLa tumour model, PEGylated Fe@Fe3O4 NPs exhibit an obvious accumulation. In tumour, the intensity of MRI signal is ∼ three folds and the increased temperature is ∼ two times than those without magnetic targeting, indicating the good magnetic targeting ability. Notably, the intrinsic high photothermal conversion efficiency and selective magnetic targeting effect of the NPs in tumour play synergistically in highly efficient ablation of cancer cells in vitro and in vivo.

PEGylated nickel carbide nanocrystals as efficient near-infrared laser induced photothermal therapy for treatment of cancer cells in vivo.

Photothermal therapy has attracted significant attention as a minimally invasive therapy methodology. In this work, we report PEGylated nickel carbide nanocrystals (Ni3C NCs) as an efficient photothermal agent for the first time. The nanoparticles exhibit a broad absorption from the visible to the near-infrared regions and a rapid rise in temperature when irradiated by an 808 nm laser even at a concentration of 100 µg mL(-1). In vitro and in vivo cytotoxicity assays demonstrate they have good biocompatibility, which lays an important foundation for their biological application. In vitro studies reveal the efficient damage of cancer cells by the exposure of 808 nm laser with a power density of 0.50 W cm(-2). Furthermore, hematoxylin and eosin (H & E) and terminal deoxynucleotidyl transferase biotin-dUTP nick-end labeling (TUNEL) staining of tumor slices confirmed the obvious destruction of cancer cells in vivo by an 808 nm laser (0.50 W cm(-2)) after only a 5 min application. Our work may open up a new application domain for transition metal carbides for biomedicine.