Effect of print orientation, storage conditions, and storage time on intaglio surface accuracy of implant surgical guides fabricated by using a stereolithography technology.

STATEMENT OF PROBLEM: The accuracy of printed implant surgical guides can be affected by different factors that negatively impact the planned implant position. How print orientation, storage time, and conditions influence manufacturing accuracy remains uncertain. PURPOSE: The purpose of this in vitro study was to evaluate the influence of print orientation, storage conditions, and storage time on the intaglio surface accuracy of implant surgical guides manufactured by using a stereolithography (SLA) printer. MATERIAL AND METHODS: A tooth-supported maxillary implant surgical guide design (control file) was used to fabricate the specimens (N=40, n=10). Four groups were created based on the print orientation used: 0 (Group 0), 45 (Group 45), 70 (Group 70), and 90 degrees (Group 90). The specimens were fabricated using an SLA printer (Form 3B+) and a biocompatible dental resin (Surgical Guide Resin V1) following the manufacturer's recommended protocol. Each group was divided into 2 subgroups based on the storage conditions: light (L subgroup) and dark (D subgroup) settings. Each specimen was digitized by using a desktop scanner (Medit T710) at days 0, 1, 7, and 14. The control file and each digitized specimen were superimposed by using the best-fit technique with a metrology program (Geomagic Control X). The root mean square (RMS) error was used to calculate the discrepancies between the control files and specimen files. Three-way ANOVA and pairwise comparison Tukey tests were used to analyze trueness. The Levene test was used to assess precision (α=.05). RESULTS: Significant trueness discrepancies were found among the groups tested (P<.001), but no significant differences were found among the subgroups (P=.100) and the storage times analyzed (P=.609). Additionally, the Tukey test showed significant RMS error mean value discrepancies between Group 0 and Group 45 (P<.001), Group 0 and Group 90 (P<.001), Group 45 and Group 70 (P<.001), and Group 70 and Group 90 (P<.001). The Levene test revealed significant SD discrepancies among the groups tested (P<.05). CONCLUSIONS: The trueness and precision of the intaglio surface of the implant surgical guides manufactured by using the printer and material tested were affected by the print orientation. However, storage conditions over a 14-day period did not impact the intaglio accuracy of the specimens.

Effect of different storage conditions on the fit of 3D-printed occlusal devices used to treat temporomandibular disorders.

STATEMENT OF PROBLEM: Research-based storage guidelines for 3-dimensional (3D)-printed occlusal devices are lacking. PURPOSE: The purpose of this in vitro study was to investigate the dimensional stability of the internal surface of 3D-printed occlusal devices under different storage conditions. MATERIAL AND METHODS: Maxillary and mandibular dental casts were scanned and exported to a 3D printer to fabricate 30 occlusal devices. The specimens were stored under 3 different conditions (n=10): air dried and stored under natural light (group DL), stored in a dark container with water (group W), and air dried and stored in a dark container (group D). The intaglio surfaces of the occlusal devices were scanned by a laboratory scanner at 4 time points: immediately after polymerization (t0, control), after 1 day (t1), after 7 days (t2), and after 27 days (t3). The dimensional changes of the fitting surfaces between t0 and t1 (Δt1), t0 and t2 (Δt2), and t0 and t3 (Δt3) were measured by using best fit alignment in a surface analysis software program. In addition, comparisons were made between the posterior and anterior sections. Statistical analysis was completed with Kolmogorov-Smirnov, 1-way ANOVA, Friedman, Kruskal-Wallis, Mann-Whitney, and unpaired t tests. RESULTS: The root mean square (RMS) of group DL between Δt1 and Δt2 (P=.002) and between Δt1 and Δt3 (P=.002) showed a statistically significant difference. The RMS of group W between Δt1 and Δt3 (P=.008) showed a statistically significant difference. When the groups were compared with each other at the different time points, the DL group showed a statistically significant difference compared with groups W and D at Δt1. The examination of different areas of the occlusal device (right molar, incisor, and left molar sites) indicated no statistically significant differences in RMS among all groups (P>.05). CONCLUSIONS: The occlusal devices of group DL showed the least dimensional change of the fitting surface for Δt1 in comparison with group W and D, while no statistically significant differences were found among the groups for Δt2 and Δt3. In terms of the different locations, no statistically significant differences were found among the 3 locations for any given group after 27 days.

Effect of firing and fabrication technique on the marginal fit of heat-pressed lithium disilicate veneers.

STATEMENT OF PROBLEM: Studies on the fit of heat-pressed anterior lithium disilicate veneers are sparse, and whether fit is affected by glaze firing or ceramic addition is unclear. PURPOSE: The purpose of this in vitro study was to evaluate and compare the marginal fit of heat-pressed anterior lithium disilicate veneers (IPS e.max Press) fabricated with the staining or cutback technique by using 3-dimensional analysis. MATERIAL AND METHODS: Two groups of heat-pressed maxillary left central incisor lithium disilicate veneers were fabricated (n=10) differing only in core thickness and the fabrication process. The tooth preparation was standardized at 0.6 mm cervical and middle third and 0.7 mm incisal third, with 1.5 mm of incisal reduction. Group S (staining) was an anatomic contour veneer with 1 glaze firing. Group CB (cutback) had a cutback core of 0.6 mm on the cervical and middle third and 0.5 mm on the incisal areas for ceramic application with 3 firings (wash, incisal, and glaze firing). The amount of ceramic application was standardized, and all veneers had identical final dimensions. Marginal fit was evaluated at 2 stages: after pressing the copings (control) and after glaze firing or ceramic addition using the virtual replica technique and 3-dimensional analysis. The wax copings were invested, eliminated, and pressed with IPS e.max lithium disilicate high translucency ingots, and the overall marginal fit and change in marginal fit after firing were measured in the cervical, mesial, distal, and incisal areas. The Shapiro-Wilk test was used to evaluate normality. Repeated-measures ANOVAs were used to explore differences between the 2 groups (S and CB) as per time (before and after firing) for each location (cervical, mesial, distal, and incisal) (α=.05). RESULTS: A statistically significant change in marginal fit after firing was found for the mesial and distal areas of the CB group (P<.05). In all other areas of measurements, no statistically significant differences were found (P>.05). The mean ±standard deviation marginal fit of group S was 63 ±13 µm and 62 ±9 µm for group CB. CONCLUSIONS: The results suggest that firing affects the marginal fit of heat-pressed anterior lithium disilicate veneers fabricated with the cutback technique but not for the staining technique.

Flexural strength of denture base acrylic resins processed by conventional and CAD-CAM methods.

STATEMENT OF PROBLEM: High flexural strength is one of the desirable properties for denture base resins, yet only few studies have evaluated the physical properties of newer denture bases such as computer-aided design and computer aided manufacturing (CAD-CAM) milled products. PURPOSE: The purpose of this in vitro study was to compare the flexural strength of 3 different types of denture base resins: compression molded, injection molded, and CAD-CAM milled. MATERIAL AND METHODS: Three groups (n=10) of acrylic denture base resins were tested: injection molded, compression molded, and CAD-CAM milled resin. ISO-compliant, rectangular specimens were fabricated (64×10×3.3 mm) (n=30). Specimens were stored in water for 1 week, and flexural strength was measured by using a 3-point bend test until failure. The Student t test was used to evaluate differences in the flexural strength and modulus of elasticity among specimen groups. The Bonferroni formula was used to set significance at α=.017 to account for multiple comparisons among the 3 groups. RESULTS: The flexural strength of the CAD-CAM milled group was significantly higher than that of the other 2 groups (P<.001), while the strength of the compression molded group was significantly greater than that of the injection molded group (P<.001). The flexural modulus of the CAD-CAM group was significantly higher than that of the other 2 groups (P<.001). CONCLUSIONS: CAD-CAM milled denture bases may be a useful alternative to conventionally processed denture bases in situations where increased resistance to flexural strength is needed.

Effect of cement type on the clinical performance and complications of zirconia and lithium disilicate tooth-supported crowns: A systematic review. Report of the Committee on Research in Fixed Prosthodontics of the American Academy of Fixed Prosthodontics.

STATEMENT OF PROBLEM: Zirconia and lithium disilicate have been commonly used as materials for tooth-supported complete-coverage restorations. Adhesive and conventional cements have been suggested for cementation of these restorations. However, evidence on the effect of cement type on the clinical outcomes of teeth restored with zirconia or lithium disilicate restorations is unclear. PURPOSE: The purpose of this systematic review was to evaluate the clinical outcomes of teeth restored with zirconia or lithium disilicate restorations when adhesive or conventional cements are used. MATERIAL AND METHODS: This systematic review adopted the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) statement and was registered at the international prospective register of systematic reviews (PROSPERO) (CRD42018096493). An electronic search was performed in 2 databases (MEDLINE-PubMed and Cochrane Central), and a manual search, from January 2008 through January 2018. The primary clinical question was framed according to the Problem/Patient/Population, Intervention/Indicator, Comparison, Outcome (PICO) approach. The following question was the primary clinical question: "For patients requiring a single tooth-supported complete-coverage ceramic restoration, does adhesive cementation, as compared with conventional cementation, improve the clinical performance and limit the complications of this restoration?" The search included articles published in peer-reviewed journals in English and was limited to randomized clinical trials and prospective and retrospective clinical studies. RESULTS: Seventeen clinical studies met the eligibility criteria and were included for qualitative analysis. Included studies had 1280 participants who received 2436 zirconia and lithium disilicate crowns. The survival rates for adhesively cemented zirconia crowns ranged from 83.3% to 100%, whereas those reported for conventionally cemented zirconia crowns ranged from 82.0% to 100%. Survival rates for adhesively cemented lithium disilicate crowns ranged from 83.5% to 100%, whereas the survival rate reported for conventionally cemented lithium disilicate crowns was 98.5%. Commonly reported clinical complications included fracture of the veneering ceramic, crown fracture, and loss of crown retention. The mean follow-up time ranged from 25.5 months to 121.2 months. The studies that were assessed for risk of bias showed poor quality of evidence. CONCLUSIONS: Based on the available evidence and within the limitations of this systematic review, zirconia and lithium disilicate tooth-supported crowns exhibited comparable survival rates and complication patterns after adhesive or conventional cementation.

Accuracy of three digital workflows for implant abutment and crown fabrication using a digital measuring technique.

STATEMENT OF PROBLEM: The accuracy of a full digital workflow using an Atlantis abutment and a milled zirconia crown; a full digital workflow with a 3Shape split-file workflow using a zirconia abutment and crown; and an interrupted digital workflow using an Atlantis abutment and a milled zirconia crown is unclear. PURPOSE: The purpose of this in vitro study was to compare 2 full digital workflows relative to an interrupted workflow for restoring an implant with a custom abutment and crown. The secondary purpose of this study was to validate a digital means of measuring internal fit and marginal discrepancy using engineering software programs. MATERIAL AND METHODS: Three workflows were evaluated. The first group, interrupted digital Atlantis (IDA) workflow, included a customized Atlantis abutment that was designed, received, and then rescanned for the definitive crown design. The second group, full digital Atlantis (FDA) workflow, included a customized Atlantis abutment and its corresponding standard tessellation language (STL) file, the Atlantis Core File, which was immediately imported into design software and used for crown design and milling. The third group, full digital split-file (FDSF) workflow, used 3Shape's full digital workflow for abutment and crown design called the split-file workflow, in which the crown and abutment were designed and milled simultaneously. All restorations were evaluated with standardized measurements using a scanning electron microscope (SEM) for 2D measurements, followed by standardized measurements using Geomagic Control, an engineering software program, which facilitated 3D evaluations of the specimens. RESULTS: The 2 Atlantis workflows, IDA and FDA, had statistically smaller marginal openings (P=.002) than the FDSF when measured using 2D SEM. The FDA had a statistically smaller 2D SEM marginal gap than the other 2 groups, IDA (P=.002) and FDSF (P=.002). The FDA had a statistically smaller 3D Geomagic marginal gap than the other 2 groups, IDA (P=.004) and FDSF (P=.006). The FDSF had a statistically smaller 3D Geomagic internal fit than the other 2 groups, FDA and IDA (both P=.006). CONCLUSIONS: All 3 workflows evaluated in this study showed clinically acceptable results in terms of mean marginal gap below 120 µm. The SEM evaluation of mean marginal opening revealed that IDA and FDA mean marginal openings were statistically smaller than the FDSF mean marginal opening. SEM and Geomagic measurements revealed that the FDA mean marginal gap was significantly smaller than IDA and FDSF mean marginal gaps. Geomagic evaluation of mean internal fit revealed that the FDSF was significantly smaller than IDA and FDA. The use of Geomagic to measure and evaluate mean marginal gap and mean internal fit as defined in this study proved to be an acceptable form of measurement with statistical validation.

Enamel-Caries Prevention Using Two Applications of Fluoride-Laser Sequence.

Studies demonstrated a significant synergism between fluoride and laser in reduction of enamel solubility. However, minimal research has focused on testing the sequence of their application and no other research investigated the preventive effect of repeated applications of a combined treatment. This study investigated the effect of two applications of fluoride-laser sequence on the resistance of sound enamel to cariogenic challenge compared to one-time application. Sixty enamel slabs were cut from 10 human incisors, ground flat, polished and coated with nail varnish except a 2 x 2 mm window. Specimens were randomly assigned into five groups of 12 specimens; (CON-) negative-control received no treatment, (CON+) positive-control received pH challenge, (FV) treated with M fluoride varnish, (F-L1) one-application fluoride-varnish followed by CO2 laser-treatment (short-pulsed 10.6 µm, 2.4J/ cm2, 10HZ, 10sec), and (F-L2) two-applications of fluoride varnish-laser treatment. Specimens were left in distilled water for one day between applications. Except CON-, all groups were submitted to pH cycling for 9-days (8 demin/ remin + 1 day remineralisation bath) at 37°C. Enamel demineralization was quantitatively evaluated by measurement of Knoop surface-microhardness (SM H) (50-grams/10 seconds). Data were analyzed using one-way ANOVA (p ≤ 0.05) followed by Duncan's Multiple Range Test. Within the limitations of this study, it was found that one or two applications of fluoride-laser sequence significantly improved resistance of the sound enamel surface to acid attack compared to FV-treated group. Although the two applications of fluoride-laser sequence (F-L1 and F-L2) showed higher SMH values, significant resistance to demineralization was only obtained with repeated applications.

Dentate transport discs can be used to reconstruct large segmental mandibular defects.

PURPOSE: This study tested the use of a dentate transport segment for the reconstruction of a large U-shaped defect in the anterior segment of the canine mandible using a novel curved reconstruction plate. The quality and quantity of bone regenerate formed by dentate versus edentulous transport segments were compared. MATERIALS AND METHODS: In 5 adult foxhound dogs, a defect of 70 to 75 mm was created in the canine mandible by excising the mandible anterior to the right and left fourth premolars. Reconstruction was performed by trifocal distraction osteogenesis using a bone transport reconstruction plate (BTRP-02), with 2 transport units being activated simultaneously, one on either side of the defect, 1 dentate and 1 edentulous. Bilateral distraction proceeded at a rate of 1 mm/day until the segments docked against each other in the midline. After 39 to 44 days of consolidation, the animals were euthanized. The quantity and quality of bone regeneration on the 2 sides were compared using micro-computed tomography. RESULTS: The defect reconstruction was successful. The amount and quality of bone formed by the transport segments were similar on the 2 sides. There were no major differences in the bone volume fraction and density of the regenerate bone formed by the 2 transport segments. The bone volume fraction and density of the regenerate bone were considerably lower than those of the host bone in the distal segments, likely owing to the short consolidation period. CONCLUSIONS: Bone transport remains a viable option in reconstructing anterior segmental defects in the mandible. The use of dentate or edentulous transport segments for reconstruction provides options for the surgeon in often highly compromised patients requiring these surgeries.

Fracture resistance of compromised endodontically treated teeth restored with bonded post and cores: An in vitro study.

STATEMENT OF PROBLEM: It is unclear which post and core system performs best when bonded to severely compromised endodontically treated teeth. PURPOSE: The purpose of this study was to investigate the fracture resistance and mode of failure of severely compromised teeth restored with 3 different adhesively bonded post and core systems. MATERIAL AND METHODS: Thirty extracted endodontically treated maxillary anterior teeth were randomly divided into 3 groups, CPC, gold cast post and core; TPC, titanium prefabricated post/composite resin core; and FPC, quartz fiber reinforced post/composite resin core. All posts were adhesively cemented. All cores resembled a central incisor preparation with no remaining tooth structure above the finish line. Cast gold crowns were fabricated and cemented adhesively. The specimens were aged with thermocycling and cyclic loading. Two specimens per group were randomly selected for micro-computed tomographic imaging before and after aging. Failure was induced with a universal testing machine. The mode of failure was characterized by the interface separation. Data were analyzed with 1-way ANOVA (α=.05) followed by post hoc tests (Bonferroni). RESULTS: A statistically significant difference was found among the 3 groups (P=.002). CPC was significantly different than TPC (P=.008) or FPC (P=.003). The primary mode of failure for CPC and TPC was root fracture, and for FPC post debonding. CONCLUSIONS: Severely compromised endodontically treated teeth restored with bonded gold cast post and cores showed significantly higher fracture resistance.

Fracture resistance of lithium disilicate restorations after endodontic access preparation: An in vitro study.

STATEMENT OF PROBLEM: Endodontic access preparation through a lithium disilicate restoration is a frequently encountered clinical situation. The common practice of repairing the accessed crown with composite resin may result in a weakened restoration. PURPOSE: The purpose of this in vitro study was to determine the effect of endodontic access preparation on the fracture resistance and microstructural integrity of monolithic pressed and monolithic milled lithium disilicate complete coverage restorations. MATERIAL AND METHODS: Twenty monolithic pressed (IPS e.max Press) and 20 monolithic milled (IPS e.max CAD) lithium disilicate restorations were fabricated. Ten of the pressed and 10 of the milled crowns were accessed for a simulated endodontic treatment and subsequently repaired by using a porcelain repair system and composite resin. All specimens were submitted to cyclic loading and then loaded to failure. Force data were recorded and analyzed with 2-way ANOVA followed by a post hoc test (Sidak correction) to indicate significant differences among the groups (α=.05). A Weibull analysis was also performed for each group. Eight (4 pressed and 4 milled) additional restorations were fabricated to complete a scanning electron microscope (SEM) analysis and evaluate the surface damage created by the endodontic access preparation. RESULTS: A statistically significant difference (P=.019) was found between the pressed intact and pressed repaired restorations and between the pressed intact and milled repaired restorations (P=.002). Specimens that were examined with an SEM showed edge chipping involving primarily the glaze layer around the access openings. CONCLUSIONS: Endodontic access preparation of lithium disilicate restorations resulted in a significantly reduced load to failure in the pressed specimens, but not in the milled specimens.

Local application of zoledronate enhances miniscrew implant stability in dogs.

INTRODUCTION: The primary purposes of this study were to evaluate how locally delivered zoledronate affects the longitudinal stability of miniscrew implants (MSIs) and the healing of bone around MSIs. METHODS: Using a randomized split-mouth design, 60 unloaded MSIs (5 × 1.6 mm) were placed in skeletally mature male foxhound-mixed breed dogs. The MSIs were randomly assigned to bilateral pairs of pilot holes (1.1 mm) that had been injected with either bisphosphonate zoledronate (n = 30, experimental group) or buffered saline solution (n = 30, control group). MSI stability was evaluated weekly for 8 weeks using resonance frequency analyses (Osstell Mentor; Integration Diagnostics, Göteborg, Sweden). Microcomputed tomography (6-µm voxel size) was used to determine the bone volume fractions of 3 layers of bone (6-24, 24-42, and 42-60 µm) surrounding the MSIs. RESULTS: Resonance frequency analysis showed that the control MSIs were significantly (P <0.05) less stable than the experimental MSIs. Although there was little or no change in stability over time for the MSIs treated with zoledronate, the stability of the control MSIs decreased during the first 4 weeks, increased through week 6, and then decreased again. The 6- to 24-µm layer closest to the MSIs, on both the experimental and the control sides, showed significantly (P <0.05) less bone than did the 24- to 42-µm and the 42- to 60-µm layers. After 8 weeks, there was significantly more cortical bone surrounding the control than the experimental MSIs. In contrast, there was significantly more trabecular bone surrounding the experimental than the control MSIs. CONCLUSIONS: One small locally delivered dose of zoledronate maintained the stability of MSIs over time, primarily because of greater amounts of trabecular bone surrounding the MSIs. Even though zoledronate enhanced the stability of MSIs in dogs, it should not be used clinically until further studies confirm its safe use in patients.

Recombinant human bone morphogenetic protein-2 stimulates bone formation during interfrontal suture expansion in rabbits.

INTRODUCTION: Suture expansion stimulates bone growth to correct craniofacial deficiencies but has a high potential of treatment relapse. The objective of this study was to investigate whether there is a dose-dependent relationship between the recombinant human bone morphogenetic protein-2 (rhBMP-2) and bone formation during suture expansion. METHODS: Fifty 6-week-old male New Zealand white rabbits were randomly assigned to 5 groups to receive 0 (control), 0.01, 0.025, 0.1, or 0.4 mg/mL of rhBMP-2 delivered by absorbable collagen sponge placed over the interfrontal suture. The suture was expanded for 33 days by 200 g of constant force via a spring anchored with 2 miniscrew implants. Distance of suture expansion, suture volume, and cross-sectional area after expansion were measured using radiographs with bone markers and microcomputed tomography. Suture widths and mineralization appositional rates were calculated based on the widths between bone labels under an epifluorescent microscope. Software (Multilevel Win 2.0; University of Bristol, Bristol, United Kingdom) was used to model distance of suture expansion over time as polynomials to compare group differences. Wilcoxon signed rank tests were performed to compare the suture volume and cross-sectional area, mineral apposition rate, and suture width between groups. The significance level was set at P = 0.05. RESULTS: Whereas the sutures were expanded in all groups, sutures were expanded by significantly greater amounts in the control and the 0.01 mg/mL groups without fusing the sutures than in the 0.025, 0.1, and 0.4 mg/mL groups with fusing sutures. Compared with the controls, the 0.01 mg/mL group showed significantly lower suture volumes, cross-sectional areas, and suture widths after expansion. The mineral apposition rate was significantly higher in the 0.01 mg/mL group than in the controls from days 10 to 30. CONCLUSIONS: The 0.01 mg/mL dose of rhBMP-2 delivered by absorbable collagen sponge can stimulate bone formation at the bony edges of the suture during suture expansion; however, higher concentrations cause suture fusion. With an appropriate concentration, rhBMP-2 might facilitate suture expansion for clinical uses.

Effect of force on alveolar bone surrounding miniscrew implants: a 3-dimensional microcomputed tomography study.

INTRODUCTION: The primary aim of this study was to better understand how bone adapts to forces applied to miniscrew implants. A secondary aim was to determine whether the direction of force applied to miniscrew implants has an effect on bone surrounding the miniscrew implants. METHODS: A randomized split-mouth design, applied to 6 skeletally mature male foxhound dogs, was used to compare miniscrew implants loaded for 9 weeks with 200 or 600 g to unloaded control miniscrew implants. By using microcomputed tomography, with an isotropic resolution of 6 µm, bone volume fractions (bone volume/total volume) were calculated for bone around the entire miniscrew implant surface. Bone volume fractions were calculated for bone 6 to 24, 24 to 42, and 42 to 60 µm from the miniscrew implant surface. For each loaded miniscrew implant, the bone volume fraction was also calculated for 2 compression and 2 noncompression zones. RESULTS: The 6 to 24-µm layer showed a significantly lower (P <0.05) bone volume fraction than did the 24 to 42-µm and the 42 to 60-µm layers, which were not significantly different. The bone volume fractions of cortical bone surrounding the apical aspects of the unloaded miniscrew implants were significantly greater (P <0.05) than the bone volume fractions of cortical bone surrounding the loaded miniscrew implants. In contrast, the bone volume fractions of noncortical bone surrounding loaded miniscrew implants were significantly greater (P <0.05) than the bone volume fractions of bone surrounding the unloaded miniscrew implants. Miniscrew implants loaded with 200 g showed significantly greater (P <0.05) amounts of noncortical bone volume fractions than did miniscrew implants loaded with 600 g. With both 200 and 600 g, zones under compression had significantly greater bone volume fractions than did the noncompression zones. CONCLUSIONS: The application of force, the amount of force applied, and the direction of force all have significant effects on the amounts of bone produced around miniscrew implants.

Vacuum-induced Suction Stimulates Increased Numbers of Blood Vessels in Healthy Dog Gingiva.

UNLABELLED:  This study was designed to determine if vacuum-induced suction increased the number of blood vessels in healthy dog gingiva as a prelude to future studies testing vacuum therapy for improving local blood supply and controlling periodontal disease. METHODS: The buccal gingiva of five dogs was treated with subatmospheric pressure for 5 days, with untreated tissues acting as controls. Biopsies were analyzed for vascular endothelial growth factors (VEGF) and blood vessels were counted. RESULTS: VEGF and vessel numbers were elevated in treatment groups compared to controls (P < 0.05). CONCLUSION: A single daily application of subatmospheric pressure might be beneficial for healing damaged or diseased gingival tissues. .

Three-dimensional evaluation of mandibular bone regenerated by bone transport distraction osteogenesis.

The purpose of this study was to evaluate the structure and material properties of native mandibular bone and those of early regenerate bone, produced by bone transport distraction osteogenesis. Ten adult foxhounds were divided into two groups of five animals each. In all animals, a 3- to 4-cm defect was created on one side of the mandible. A bone transport reconstruction plate, consisting of a reconstruction plate with an attached intraoral transport unit, was utilized to stabilize the mandible and regenerate bone at a rate of 1 mm/day. After the distraction period was finished, the animals were killed at 6 and 12 weeks of consolidation. Micro-computed tomography was used to assess the morphometric and structural indices of regenerate bone and matching bone from the unoperated contralateral side. Significant new bone was formed within the defect in the 6- and 12-week groups. Significant differences (P ≤ 0.05) between mandibular regenerated and native bone were found in regard to bone volume fraction, mineral density, bone surface ratio, trabecular thickness, trabecular separation, and connectivity density, which increased from 12 to 18 weeks of consolidation. We showed that regenerated bone is still mineralizing and that native bone appears denser because of a thick outer layer of cortical bone that is not yet formed in the regenerate. However, the regenerate showed a significantly higher number of thicker trabeculae.

Three-dimensional analysis of peri-bone-implant contact of rough-surface miniscrew implants.

INTRODUCTION: In this study, we evaluated the effects of surface modifications of miniscrew implants (MSIs) and force application on bone surrounding MSIs. METHODS: Seven skeletally mature male foxhound dogs were followed for 9 weeks; a randomized split-mouth design was used to compare 21 MSIs with sandblasted, large-grit, and acid-etched (SLA) surfaces and 21 identical machine-surfaced MSIs. MSIs immediately loaded with 200-g nickel-titanium coil springs were compared with unloaded MSIs. Bone volume to total volume ratios of cortical and noncortical bone regions were measured at 6 to 24 µm and 24 to 42 µm from the entire MSI surface using microcomputed tomography with an isotropic resolution of 6 µm. RESULTS: Clinical success of SLA-surfaced MSIs was 100%, compared with 85.7% for machine-surfaced MSIs. There was significantly (P <0.05) more bone at the coronal aspects of the SLA-surfaced than the machine-surfaced MSIs; the SLA-surfaced MSIs also showed significantly greater decreases in bone between their most coronal and apical aspects. MSIs that were loaded demonstrated significantly (P <0.05) greater decreases in surrounding bone than unloaded MSIs. The amount of bone within 6 to 24 µm of the MSIs was significantly less than that within 24 to 42 µm. Mean placement torque was higher for the SLA-surfaced (42 Ncm) than the machine-surfaced (39 Ncm) MSIs, but the difference was not statistically significant. CONCLUSIONS: SLA surface treatment and loadings have significant effects on bone surrounding the MSIs; this might be related to higher success rates and greater secondary stability.

The Association Between Occlusal Status and the Soft and Hard Tissue Conditions Around Single-Unit Dental Implants.

The occlusal status of single-unit dental implants were evaluated using traditional and computerized methods. The type of occlusal contact in maximum intercuspation and the presence of occlusal contacts on the implant during eccentric movements were recorded. A digital sensor was used for computerized analysis of occlusion. Forty-four patients with 74 implants were included. Twenty-nine implants (39%) presented with "heavy" occlusal contacts, 40 implants (54.1%) presented with "light" contacts, and 5 implants (6.8%) presented with "no contact." No statistically significant association was found between the occlusal status and any of the soft and hard tissue condition variables (P > .05).

Preclinical Evaluation of a Crown-Splinted Custom Root-Shaped Implant.

OBJECTIVE: To test whether a Maryland bridge-type splint provides adequate stability for a custom root-shaped implant to osseointegrate in a manner substantially equivalent to that of a threaded implant. METHODS: Six beagle dogs were subjected to intraoral impressions and cone beam scans that were used to fabricate custom root-shaped implants (RTIs) and crowns. Premolars in the mandible (P4) and in the maxilla (P3) were extracted, and 24 RTIs were immediately placed in extraction sockets. Splint extensions of the crowns were bonded to mesial and distal teeth. Twelve mandibular molars (M2) were extracted, and threaded implants (DXI), serving as controls, were placed immediately. Animals were placed on a soft diet after surgery. Weekly intraoral photographs and radiographs were taken, and animals were sacrificed at 4 months. Fluorescent labels were injected 35, 21, and 7 days before sacrifice. Clinical implant stability and vertical pullout forces were tested, and loss of vertical bone height was measured on radiographs. Histomorphometric measurements of percent bone-to-implant contact (BIC) and mineral apposition rates were made from undecalcified sections. RESULTS: Three RTI splints broke or debonded, and the implants were removed. No loss of DXI implants was noted. All remaining implants were clinically stable. Mean pullout forces were 366.7 ± 182.8 N for RTI (no pullout data for the threaded DXI). Mean vertical bone loss was 0.4 ± 0.6 mm mesially and 0.2 ± 0.7 mm distally for RTI and 0.8 ± 1.1 mm mesially and 0.8 ± 1.0 mm distally for DXI, with no significant differences between groups. BIC values were 70.8% ± 12.7% for mandibular RTI, 68.3% ± 11.6% for maxillary RTI, and 78.8% ± 5.5% for DXI. Mineral apposition rates within local osteons were 1.9 ± 0.5 µm for RTI and 1.7 ± 0.3 µm for DXI; at the implant surface, they were 2.5 ± 1.2 µm for RTI and 3.3 ± 1.8 µm for DXI, with no significant differences between groups. CONCLUSION: All RTIs with intact splints exhibited clinically successful integration, similar to that of control threaded implants. The RTI may be a viable option for single-tooth replacement.

The Role of Occlusion in the Dental Implant and Peri-implant Condition: A Review.

Dental implants have become a widely used dental treatment approach. It is important to identify factors that can be detrimental to dental implants and the peri-implant complex. There is controversy regarding whether occlusion plays a role in the implant and peri-implant condition. The present study aims to review the scientific literature regarding this topic. Animal and human studies, and previous reviews on the topic are included and presented. There is a wide heterogeneity among study designs. Several articles demonstrated that occlusion and occlusion overload could detrimentally affect the peri-implant condition, while other articles did not support these results. More studies are needed to help understand the mechanisms by which occlusion might play a role in the peri-implant condition.

Congenital adrenal hyperplasia: a case report with premature teeth exfoliation and bone resorption.

Congenital adrenal hyperplasia (CAH) is an inherited autosomal recessive disorder characterized by insufficient production of cortisol. The aim of this case report was to present a child with CAH, premature exfoliation of primary teeth and accelerated eruption of his permanent teeth related to bone resorption. A 4.5-year-old Caucasian boy with CAH and long-term administration of glucocorticoids was referred for dental restoration. Clinical examination revealed primary molars with worn stainless steel crowns, severe attrition of the upper canines, and absence of the upper incisors. Before the completion of treatment, abnormal mobility of the first upper primary molars and the lower incisors was detected, and a few days later the teeth exfoliated prematurely. Histologic examination revealed normal tooth structure. Alkaline phosphatase and blood cells values were normal. Eruption of the permanent dentition was also accelerated. Tooth mobility was noticed in the permanent teeth as soon as they erupted, along with bone destruction. Examination revealed an elevated level of receptor activator of nuclear factor-κB ligand and lower-than-normal osteoprotegerin and vitamin D levels. The patient was treated with vitamin D supplements, and his teeth have been stable ever since. CAH is a serious chronic disorder appearing in children with accelerated dental development and possibly premature loss of primary teeth.