Hypericin photodynamic activity in DPPC liposomes - part II: stability and application in melanoma B16-F10 cancer cells.

Hypericin (Hyp) is considered a promising photosensitizer for Photodynamic Therapy (PDT), due to its high hydrophobicity, affinity for cell membranes, low toxicity and high photooxidation activity. In this study, Hyp photophysical properties and photodynamic activity against melanoma B16-F10 cells were optimized using DPPC liposomes (1,2-dipalmitoyl-sn-glycero-3-phosphocholine) as a drug delivery system. This nanoparticle is used as a cell membrane biomimetic model and solubilizes hydrophobic drugs. Hyp oxygen singlet lifetime (τ) in DPPC was approximately two-fold larger than that in P-123 micelles (Pluronic™ surfactants), reflecting a more hydrophobic environment provided by the DPPC liposome. On the other hand, singlet oxygen quantum yield values (ΦΔ1O2) in DPPC and P-123 were similar; Hyp molecules were preserved as monomers. The Hyp/DPPC liposome aqueous dispersion was stable during fluorescence emission and the liposome diameter remained stable for at least five days at 30 °C. However, the liposomes collapsed after the lyophilization/rehydration process, which was resolved by adding the lyoprotectant Trehalose to the liposome dispersion before lyophilization. Cell viability of the Hyp/DPPC formulation was assessed against healthy HaCat cells and high-metastatic melanoma B16-F10 cells. Hyp incorporated into the DPPC carrier presented a higher selectivity index than the Hyp sample previously solubilized in ethanol under the illumination effect. Moreover, the IC50 was lower for Hyp in DPPC than for Hyp pre-solubilized in ethanol. These results indicate the potential of the formulation of Hyp/DPPC for future biomedical applications in PDT treatment.

Polycaprolactone nanofibers colonized by HeLa cells: an alternative for in vitro investigation of fungal infection.

Introduction: In vitro 3D equivalent tissues can be used for studies of fungal infections. Objectives: To develop 3D electrospun nanofibers using polycaprolactone (PCL) colonized by HeLa cells as a possible in vitro model for the investigation of fungal infection. Materials & methods: A PCL solution was synthesized and electrospun. HeLa cells were cultured on the nanostructured PCL scaffolds, forming a 3D structure. Physicochemical, biological and Candida albicans infection assays were performed in this model. Results: The nanostructured PCL scaffolds showed favorable physicochemical characteristics and allowed the colonization of HeLa cells, which showed indications of extracellular matrix production. Conclusions: Fungal infection was evidenced in the 3D nanostructured PCL scaffolds, being viable, economical and compatible to study fungal infections in vitro.

Advanced theranostic nanoplatforms for hypericin delivery in the cancer treatment.

Biomodified coated-lipid vesicles were obtained using the DPPC lipid (L) and F127 copolymer linked covalently with spermine (SN), biotin (BT), and folic acid (FA), resulting in LF127-SN, LF127-BT, and LF127-FA nanoplatforms. The photosensitizer hypericin (HY) was incorporated into the nanosystem by a thin-film method and characterized by dynamic light scattering, zeta potential, encapsulation efficiency, and transmission electronic microscopy. The results provided a good level of stability for all nanoplatforms for at least 5 days as an aqueous dispersion. The in vitro serum stability showed that the HY-loaded LF127-SN has a lower tendency to form complexes with BSA protein than with its analogs. LF127-SN was the most stable HY formulation, followed by LF127-BT and LF127-FA, confirmed by the association constant (Kd) values: 600 µmol L-1, 1100 µmol L-1, 515 µmol L-1, and 378 µmol L-1 for LF127, LF127 FA, LF127-BT, and LF127-SN, respectively. The photodynamic potential of HY was accessed by cytotoxicity assays using Caco-2, B16-F10, L-929, and HaCat cells. HY-loaded LF127-SN revealed a significant increase in the selectivity compared to other nanoplatforms. HY-loaded in LF127-BT and LF127-SN showed distinct uptake and biodistribution after 2 h of intravenous application. All biomodified coated-lipids showed satisfactory metabolism within 72 h after application, without significant accumulation or residue in any vital organ. These results suggest that incorporating HY-loaded in these nanosystems may be a promising strategy for future applications, even with a small amount of binders to the coating copolymer (0.02% w/v). Furthermore, these results indicate that the LF127-SN showed remarkable superiority compared to other evaluated systems, being the most distinct for future photodynamic therapy and theranostic applications.

Design and Optimization of Stimuli-responsive Emulsion-filled Gel for Topical Delivery of Copaiba Oil-resin.

This study presents a phytotherapeutic emulsion-filled gel design composed of Pluronic® F127, Carbopol® C934P, and high level of copaiba oil-resin (PHY-ECO). Mathematical modeling and response surface methodology (RSM) were employed to access the optimal ratio between the oil and the polymer gel-matrix constituents. The chemometric approach showed robust mechanical and thermoresponsive properties for emulsion gel. The model predicts viscosity parameters at 35.0°C (skin temperature) from PHY-ECOs. Optimized PHY-ECOs were described by 18-20% (w/w) F127, 0.25% (w/w) C934P, and 15% (w/w) copaiba oil-resin, and showed interfacial layers properties that led to high physicochemical stability. Besides, it had thermal stimuli-responsive that led large viscosity range before and after skin administration, observed by oscillatory rheology. These behaviors give the optimized smart PHY-ECO high design potential to be used as a pharmaceutical platform for CO delivery, focusing on the anti-inflammatory therapy and skin wound care.

Photophysical characterization of Hypericin-loaded in micellar, liposomal and copolymer-lipid nanostructures based F127 and DPPC liposomes.

Hypericin (Hy) compound presents a high photoactivity in photodynamic therapy (PDT), photodiagnosis and theranostics applications. The maintenance of this compound in monomeric form could undermine the potential benefits of its photophysical and photodynamic activity. In this study, we demonstrated that the Hy formulated in a system based on the use of the F127 copolymer and the 1,2-dipalmitoyl-sn-3-glycerol-phosphatidylcholine (DPPC) as micelles, liposomal vesicles and Copolymer-Lipid coated systems, have improved its photophysical properties for many clinical modalities. Based on the results of the triplet state lifetime values (τt), the singlet oxygen quantum yield (ΦΔ1O2), the fluorescence lifetime (τF) and the fluorescence quantum yield (ΦF), all Hy formulations had its photophysical properties described in different models of drug delivery systems (DDS). In addition, the transient spectra profile of those formulations was unaffected by the Hy incorporation process, except for the liposomal system, which demonstrated to be the less stable one by flash photolysis technique. The cytotoxic effects of those formulations were also investigated for CaCo-2 and HaCat cells line. The cytotoxic concentrations for 50% (CC50) were 0.56, 1.05, 1.33 and 4.80 µmol L-1 for Copolymer-Lipid/Hy, DPPC/Hy, F127/Hy and ethanol/Hy for CaCo-2 cells, respectively, and 0.69, 2.02, 1.45 and 1.16 µmol L-1 for Copolymer-Lipid/Hy, DPPC/Hy, F127/Hy and ethanol/Hy for HaCat cells, respectively. The F127 copolymer had a significant role in many photophysical parameters determined for Copolymer-Lipid/Hy coated system. Although all those formulations had shown satisfactory results, Copolymer-Lipid/Hy proved to be superior in many aspects, being the most promising formulation for PDT, photodiagnosis and theranostics applications.

Drug Crystal-Related Gastrointestinal Complications Involve Crystal-Induced Release of Neutrophil and Monocyte Extracellular Traps.

Ion-exchange resins are commonly used to manage complications of chronic kidney disease, such as hyperphosphatemia, hyperkalemia, and hypercholesterolemia. Occasionally, these drugs can irritate the gastrointestinal lining and cause life-threatening intestinal necrosis. Currently, the pathophysiology of drug crystal-induced intestinal necrosis is not well understood. We hypothesized that crystals of ion-exchange resins like sevelamer, polystyrene sulfonate, and cholestyramine can trigger the formation of neutrophil and monocyte extracellular traps by contributing to intestinal barrier dysfunction. Light and fluorescence microscopy of the colonic resection specimen from a patient with chronic kidney disease revealed severe intestinal necrosis, ulceration, sevelamer crystals, and inflammation upon oral intake of sevelamer, as well as the formation of neutrophil extracellular traps in proximity to small sevelamer crystals. Indeed, drug crystals reduced metabolic activity and induced barrier dysfunction and cell death in human intestinal epithelial cells in vitro. In addition, drug crystals triggered the release of neutrophil and monocyte extracellular traps. Taken together, these data raise the possibility that besides other factors including chronic kidney disease, diabetes mellitus, and hypertension, drug crystals may further amplify a pre-existing barrier dysfunction and necroinflammation in a crescendo of local intestinal necrosis and systemic inflammation/infection, as occasionally observed in patients on ion-exchange resin therapy.

Nanofibrous silica microparticles/polymer hybrid aerogels for sustained delivery of poorly water-soluble camptothecin.

The surface functionalization of nanoporous silica materials with chemical agents opens up numerous possibilities, including improvement in the materials' ability to carry high payloads of drugs. In this study, KCC-1 nanofibrous silica microparticles are functionalized with methyl groups and then combined with poly(vinyl alcohol) (PVA) and poly(acrylic acid) (PAA) to produce hybrid aerogels that can deliver a poorly water-soluble anticancer drug. The synthetic steps involve freeze-drying a polymer solution of PVA and PAA that contains methyl-modified KCC-1 microparticles and then cross-linking the two polymers via a solid-state reaction. Benefiting from the incorporated methyl-modified KCC-1 microparticles, the hybrid aerogels can load and deliver a payload of camptothecin (CPT), an anticancer drug with antitumor activity but limited clinical application due to its hydrophobicity. The aerogels also show a sustained release of CPT for more than two weeks. The drug release profile can further be tuned by varying the relative amounts of PVA, PAA, and methyl-modified KCC-1. The aerogels are biocompatible to healthy cells, such as immortalized human epithelial (HaCaT), African green monkey kidney (Vero) and murine fibroblast (L929) cells. When loaded with CPT, they show potent antitumor activity against HeLa (HPV18-positive), SiHa (HPV16-positive) and C33A (HPV-negative) cancer cells, significantly inhibiting cell growth.

Multifunctional hybrid aerogels: hyperbranched polymer-trapped mesoporous silica nanoparticles for sustained and prolonged drug release.

In this study, we show the synthesis of novel hybrid organic-inorganic aerogel materials with one-dimensionally aligned pores and demonstrate their use as sustained and prolonged release systems for a hydrophobic drug. The materials are synthesized by trapping mesoporous silica nanoparticles within a hyperbranched polymer network made from poly(vinyl alcohol) (PVA) and poly(acrylic acid) (PAA). The synthetic method involves dispersing mesoporous silica nanoparticles in a polymer solution, then freeze-drying the solution, and finally subjecting the resulting materials to high temperature to activate a solid-state condensation reaction between PVA and PAA. Before trapping the mesoporous silica nanoparticles within the hyperbranched polymeric network, their pores are decorated with hydrophobic groups so that they can serve as good host materials for hydrophobic drugs. The potential application of the hybrid aerogels as drug carriers is demonstrated using the hydrophobic, anti-inflammatory agent dexamethasone (DEX) as a model drug. Due to their hydrophobic pores, the hybrid aerogels show excellent drug loading capacity for DEX, with an encapsulation efficiency higher than 75%. Furthermore, the release pattern of the payloads of DEX encapsulated in the aerogels is highly tailorable (i.e., it can be made faster or slower, as needed) simply by varying the PVA-to-PAA weight ratio in the precursors, and thus the 3-dimensional (3-D) structures of the cross-linked polymers in them. The materials also show sustained drug release, for over 50 days or more. In addition, the aerogels are biocompatible, as demonstrated with Vero cells, and greatly promote the cell proliferation of L929 fibroblasts. Also, the nanoparticles functionalized with quaternary groups and dispersed within the aerogels display bactericidal activity against E. coli, S. aureus, B. subtilis, and P. aeruginosa. These new hybrid aerogels can, thus, be highly appealing biomaterials for sustained and prolonged drug release, such as wound dressing systems.

Scaffolds based on chitosan/pectin thermosensitive hydrogels containing gold nanoparticles.

Thermosensitive hydrogels based on chitosan/pectin (CS/Pec) and CS/Pec/gold nanoparticles (CS/Pec/AuNPs) were successfully prepared with different AuNP levels. Using a tilting method, gelation temperature was demonstrated to decrease when the amount of AuNPs increased and pectin concentrations decreased. The presence of AuNPs in the CS/Pec composite was evaluated via WAXS and UV-vis techniques, while SEM analysis assessed the average size of pores (350-600µm). All samples were extremely cytocompatible with many cell types, such as normal kidney epithelial cells (VERO cells), epithelial colorectal adenocarcinoma cells (HT-29 cells), HPV-16 positive human cervical tumour cells (SiHa cells), kidney epithelial cells (LLCMK2 cells) and murine macrophage cells (J774A1 cells). Cell viability assays using the MTT method upon mouse preosteoblastic cells (MC3T3-E1 cells) showed that CS/Pec and CS/Pec/AuNPs composites had the potential to foster proliferation and growth of bone cells, making them possible stimulators for reconstruction of bone tissues.