A serotonin voltammetric biosensor composed of carbon nanocomposites and DNA aptamer.

A sensitive and selective voltammetric biosensor composed of layer-by-layer (LbL) self-assembly of positively charged poly(diallyldimethylammonium)-wrapped oxidized single-walled carbon nanotubes (PDDA-oSWCNTs), negatively charged serotonin (5-hydroxytryptamine, 5-HT)-specific aptamer, and tyrosinase on Au nanoparticles deposited screen printed carbon electrode was developed for measurement of 5-HT. Surface characteristics of 5-HT biosensor were explored using scanning electron microscopy, X-ray photoelectron spectroscopy, and electrochemical impedance spectroscopy. The respective effects of 5-HT-specific aptamer and oSWCNTs on the detection of 5-HT were investigated by differential pulse voltammetry (DPV). The peak current at the potential of 0.29 V (vs. Ag/AgCl) increased with respect to 5-HT concentration resulting in two dynamic ranges from 0.05 to 0.5 and 1 to 20 µM with a limit of detection of 2 nM from the LbL biosensor in buffer solution, which were better than those without the LbL of aptamer and oSWCNTs. The developed biosensor was applied to the direct determination of 5-HT concentrations in undiluted healthy control and Internet gaming disorder serum samples. The results were verified by comparison with those from liquid chromatography-mass spectrometric analyses.

Development of Cassette PAMPA for Permeability Screening.

The parallel artificial membrane permeability assay (PAMPA) is widely used in early-stage drug discovery to discriminate compounds by intestinal permeability. The purpose of the current study was to establish a cassette (n-in-1) PAMPA to enable permeability screening of lipophilic compounds. A double-sink PAMPA consisting of a pH gradient (i.e., pH 6.5 and 7.4 for the donor and receiver compartments, respectively) and a lipophilic sink (i.e., a surfactant in the receiver solution) was utilized with cassette incubation of 10 reference compounds. Sample analysis was conducted using selected reaction monitoring (SRM) with a triple quadrupole LC-MS/MS system. Correlation between PAMPA permeability and human intestinal absorption (HIA) of the reference compounds yielded two false negatives, namely propranolol (PPN) and verapamil (VER); these two compounds showed a substantially lower recovery (ca. 10%) than other reference compounds (>69%). This cassette PAMPA was repeated subsequently with polysorbate 80 added to the donor compartments, which resulted in a significant increase in both the recovery and the permeability of the false negatives. Accordingly, the permeability class of all reference compounds could be unambiguously differentiated using this cassette PAMPA. Also, a strong linear correlation (r=0.9845) was observed between the cassette and discrete permeability of all reference compounds.

Analysis of the characteristics of cracked teeth and evaluation of pulp status according to periodontal probing depth.

BACKGROUND: The purpose of this study was to analyze the characteristics of cracked teeth and to evaluate pulp status according to periodontal probing depth (PPD). METHODS: A total of 182 cracked teeth were included. The location and type of the cracked teeth, age and gender of the patients, restoration type, pulp status, PPD, and radiographic findings were analyzed. RESULTS: Mandibular second molars (25.3%) were the most frequently involved teeth, followed by mandibular first molars (22.5%), maxillary first molars (22.0%), and maxillary second molars (17.6%). The patient age was most frequently 50-59 years. Cracks occurred mainly in nonbonded restorations, such as gold (26.9%), and were usually found in intact teeth (37.9%). A total of 103 teeth (56.6%) had an initial PPD of less than 3 mm, while 40 (22.0%) had a PPD of 4-6 mm, and 39 (21.4%) had PPD of 7 mm or more. A total of 33 cracked teeth (18.1%) were diagnosed with pulp necrosis, 40 (22.0%) with irreversible pulpitis, and 97 (53.3%) with reversible pulpitis. The incidence of pulp necrosis was 31.8% among cracked teeth with a PPD of 4-6 mm, and 28.6% among those with a PPD of 7 mm or more. CONCLUSIONS: Cracks occurred mainly in molar teeth, and were commonly found in intact teeth with no restoration. Patients with cracked teeth were most frequently aged 50-59 years. Cracked teeth showing a PPD of more than 4 mm were more likely to show pulp necrosis.

Disintegration of Waste Activated Sludge by Thermally-Activated Persulfates for Enhanced Dewaterability.

Oxidation by persulfates at elevated temperatures (thermally activated persulfates) disintegrates bacterial cells and extracellular polymeric substances (EPS) composing waste-activated sludge (WAS), facilitating the subsequent sludge dewatering. The WAS disintegration process by thermally activated persulfates exhibited different behaviors depending on the types of persulfates employed, that is, peroxymonosulfate (PMS) versus peroxydisulfate (PDS). The decomposition of PMS in WAS proceeded via a two-phase reaction, an instantaneous decomposition by the direct reaction with the WAS components followed by a gradual thermal decay. During the PMS treatment, the WAS filterability (measured by capillary suction time) increased in the initial stage but rapidly stagnated and even decreased as the reaction proceeded. In contrast, the decomposition of PDS exhibited pseudo first-order decay during the entire reaction, resulting in the greater and steadier increase in the WAS filterability compared to the case of PMS. The treatment by PMS produced a high portion of true colloidal solids (<1 µm) and eluted soluble and bound EPS, which is detrimental to the WAS filterability. However, the observations regarding the dissolved organic carbon, ammonium ions, and volatile suspended solids collectively indicated that the treatment by PMS more effectively disintegrated WAS compared to PDS, leading to higher weight (or volume) reduction by postcentrifugation.

Immunomodulatory properties and in vivo osteogenesis of human dental stem cells from fresh and cryopreserved dental follicles.

In our previous study, dental follicle tissues from extracted wisdom teeth were successfully cryopreserved for use as a source of stem cells. The goals of the present study were to investigate the immunomodulatory properties of stem cells from fresh and cryopreserved dental follicles (fDFCs and cDFCs, respectively) and to analyze in vivo osteogenesis after transplantation of these DFCs into experimental animals. Third passage fDFCs and cDFCs showed similar expression levels of interferon-γ receptor (CD119) and major histocompatibility complex class I and II (MHC I and MHC II, respectively), with high levels of CD119 and MHC I and nearly no expression of MHC II. Both fresh and cryopreserved human DFCs (hDFCs) were in vivo transplanted along with a demineralized bone matrix scaffold into mandibular defects in miniature pigs and subcutaneous tissues of mice. Radiological and histological evaluations of in vivo osteogenesis in hDFC-transplanted sites revealed significantly enhanced new bone formation activities compared with those in scaffold-only implanted control sites. Interestingly, at 8 weeks post-hDFC transplantation, the newly generated bones were overgrown compared to the original size of the mandibular defects, and strong expression of osteocalcin and vascular endothelial growth factor were detected in the hDFCs-transplanted tissues of both animals. Immunohistochemical analysis of CD3, CD4, and CD8 in the ectopic bone formation sites of mice showed significantly decreased CD4 expression in DFCs-implanted tissues compared with those in control sites. These findings indicate that hDFCs possess immunomodulatory properties that involved inhibition of the adaptive immune response mediated by CD4 and MHC II, which highlights the usefulness of hDFCs in tissue engineering. In particular, long-term preserved dental follicles could serve as an excellent autologous or allogenic stem cell source for bone tissue regeneration as well as a valuable therapeutic agent for immune diseases.

Targeting SARM1 improves autophagic stress-induced axonal neuropathy.

ABBREVIATIONS: AAV: adeno-associated virus; ATF3: activating transcription factor 3; ATG7: autophagy related 7; AVIL: advillin; cADPR: cyclic ADP ribose; CALC: calcitonin/calcitonin-related polypeptide; CMT: Charcot-Marie-Tooth disease; cKO: conditional knockout; DEG: differentially expressed gene; DRG: dorsal root ganglion; FE-SEM: field emission scanning electron microscopy; IF: immunofluorescence; NCV: nerve conduction velocity; PVALB: parvalbumin; RAG: regeneration-associated gene; ROS: reactive oxygen species; SARM1: sterile alpha and HEAT/Armadillo motif containing 1; SYN1: synapsin I.

p62/sequestosome-1 as a severity-reflecting plasma biomarker in Charcot-Marie-Tooth disease type 1A.

Autophagy is a self-degradation system for recycling to maintain homeostasis. p62/sequestosome-1 (p62) is an autophagy receptor that accumulates in neuroglia in neurodegenerative diseases. The objective of this study was to determine the elevation of plasma p62 protein levels in patients with Charcot-Marie-Tooth disease 1A (CMT1A) for its clinical usefulness to assess disease severity. We collected blood samples from 69 CMT1A patients and 59 healthy controls. Plasma concentrations of p62 were analyzed by ELISA, and we compared them with Charcot-Marie-Tooth neuropathy score version 2 (CMTNSv2). A mouse CMT1A model (C22) was employed to determine the source and mechanism of plasma p62 elevation. Plasma p62 was detected in healthy controls with median value of 1978 pg/ml, and the levels were significantly higher in CMT1A (2465 pg/ml, p < 0.001). The elevated plasma p62 levels were correlated with CMTNSv2 (r = 0.621, p < 0.0001), motor nerve conduction velocity (r = - 0.490, p < 0.0001) and disease duration (r = 0.364, p < 0.01). In C22 model, increased p62 expression was observed not only in pathologic Schwann cells but also in plasma. Our findings indicate that plasma p62 measurement could be a valuable tool for evaluating CMT1A severity and Schwann cell pathology.

Fibronectin-targeted FUD and PEGylated FUD peptides for fibrotic diseases.

Tissue fibrosis is characterized by excessive deposition of extracellular matrix (ECM) molecules. Fibronectin (FN) is a glycoprotein found in the blood and tissues, a key player in the assembly of ECM through interaction with cellular and extracellular components. Functional Upstream Domain (FUD), a peptide derived from an adhesin protein of bacteria, has a high binding affinity for the N-terminal 70-kDa domain of FN that plays a crucial role in FN polymerization. In this regard, FUD peptide has been characterized as a potent inhibitor of FN matrix assembly, reducing excessive ECM accumulation. Furthermore, PEGylated FUD was developed to prevent rapid elimination of FUD and enhance its systemic exposure in vivo. Herein, we summarize the development of FUD peptide as a potential anti-fibrotic agent and its application in experimental fibrotic diseases. In addition, we discuss how modification of the FUD peptide via PEGylation impacts pharmacokinetic profiles of the FUD peptide and can potentially contribute to anti-fibrosis therapy.

Transformation of microplastics by oxidative water and wastewater treatment processes: A critical review.

Microplastics (MPs) are contaminants of emerging concern that accumulate in various environments, where they pose threats to both the ecosystem and public health. Since MPs have been detected in drinking water resources and wastewater effluents, more efficient treatment is needed at wastewater treatment plants (WWTPs) and drinking water treatment plants (DWTPs). This review discusses the potential of biological, photochemical, Fenton (-like) systems, ozonation, and other oxidation processes in the treatment of MPs in terms of their indicators of oxidation such as mass loss and surface oxidation. The oxidation processes were further analyzed in terms of limitations and environmental implications. Most previous studies examining MPs degradation using conventional treatments-such as UV disinfection, ozonation, and chlorination-employed significantly higher doses than the common doses applied in DWTPs and WWTPs. Owing to such dose gaps, the oxidative transformation of MPs observed in many previous studies are not likely to occur under practical conditions. Some novel oxidation processes showed promising MPs treatment efficiencies, while many of them have not yet been applied on a larger scale due to high costs and the lack of extensive basic research. Health and environmental impacts related to the discharge of oxidized MPs in effluents should be considered carefully in different aspects: the role as vectors of external pollutants, release of organic compounds (including organic byproducts from oxidation) and fragmentation into smaller particles as MPs circulate in the ecosystem as well as the possibility of bioaccumulation. Future research should also focus on ways to incorporate developed oxidation processes in DWTPs and WWTPs to mitigate MPs contamination.

Evaluation of linear versus star-like polymer anti-cancer nanomedicines in mouse models.

Nanomedicines are considered next generation therapeutics with advanced therapeutic properties and reduced side effects. Herein, we introduce tailored linear and star-like water-soluble nanosystems as stimuli-sensitive nanomedicines for the treatment of solid tumors or hematological malignancies. The polymer carrier and drug pharmacokinetics were independently evaluated to elucidate the relationship between the nanosystem structure and its distribution in the body. Positron emission tomography and optical imaging demonstrated enhanced tumor accumulation of the polymer carriers in 4T1-bearing mice with increased tumor-to-blood and tumor-to-muscle ratios. Additionally, there was a significant accumulation of doxorubicin bound to various polymer carriers in EL4 tumors, as well as excellent in vivo therapeutic activity in EL4 lymphoma and moderate efficacy in 4T1 breast carcinoma. The linear nanomedicine showed at least comparable pharmacologic properties to the star-like nanomedicines regarding doxorubicin transport. Therefore, if multiple parameters are considered such as its optimized structure and simple and reproducible synthesis, this polymer carrier system is the most promising for further preclinical and clinical investigations.

Exome sequencing is an efficient tool for genetic screening of Charcot-Marie-Tooth disease.

Charcot-Marie-Tooth disease (CMT) is one of the most common inherited neuropathies and is a genetically and clinically heterogeneous disorder with variable inheritance modes. As several molecules have been reported to have therapeutic effects on CMT, depending on the underlying genetic causes, exact genetic diagnostics have become very important for executing personalized therapy. Whole-exome sequencing has recently been introduced as an available method to identify rare or novel genetic defects from genetic disorders. Particularly, CMT is a model disease to apply exome sequencing because more than 50 genes (loci) are involved in its development with weak genotype-phenotype correlation. This study performed the exome sequencing in 25 unrelated CMT patients who revealed neither 17p12 duplication/deletion nor several major CMT genes. This study identified eight causative heterozygous mutations (32%). This detection rate seems rather high because each sample was tested before the study for major genetic causes. Therefore, this study suggests that the exome sequencing can be a highly exact, rapid, and economical molecular diagnostic tool for CMT patients who are tested for major genetic causes.

Two novel mutations of GARS in Korean families with distal hereditary motor neuropathy type V.

Glycyl-tRNA synthetase (GARS), which encodes the enzyme responsible for charging tRNA(Gly) with glycine in both the cytoplasm and mitochondria, is implicated to Charcot-Marie-Tooth disease 2D (CMT2D) and distal hereditary motor neuropathy type V (dHMN-V). We performed whole exome sequencing (WES) to identify the genetic defects in the two dHMN families. WES revealed several decades of non-synonymous variants in the CMT and aminoacyl-tRNA synthetase genes. The subsequent capillary sequencing for family members and controls revealed two novel causative mutations, c.598G>A (D200N) and c.794C>T (S265F), in the GARS gene in each dHMN family. Both mutations were cosegregated with affected individuals in each family, and were not found in the 200 controls. The mutation sites were well conserved between the different species and in silico analysis predicted that both mutations may affect protein function. Therefore, we believe that these two novel GARS mutations are the underlying causes of the dHMN phenotype.

Production of paclitaxel-loaded PEG-b-PLA micelles using PEG for drug loading and freeze-drying.

A new approach named PEG-assist is introduced for the production of drug-loaded polymeric micelles. The method is based on the use of PEG as the non-selective solvent for PEG-b-PLA in the fabrication procedure. Both hydration temperature and PEG molecular weight are shown to have a significant effect on the encapsulation efficiency of PTX in PEG4kDa-b-PLA2kDa micelles. The optimal procedure for fabrication includes the use of PEG1kDa as the solvent at 60 °C, cooling the mixture to 40 °C, hydration at 40 °C, freezing at -80 °C and freeze-drying at -35 °C, 15 Pa. No significant difference (p > 0.05) in PTX encapsulation, average particle size and polydispersity index is observed between the samples before freeze-drying and after reconstitution of the freeze-dried cake. The prepared PTX formulations are stable at room temperature for at least 8 h. Scaling the batch size to 25× leads to no significant change (p > 0.05) in PTX encapsulation, average particle size and polydispersity index. PEG-assist method is applicable to other drugs such as 17-AAG, and copolymers of varied molecular weights. The use of no organic solvent, simplicity, cost-effectiveness, and efficiency makes PEG-assist a very promising approach for large scale production of drug-loaded polymeric micelles.

Photocurrents at polarized liquid|liquid interfaces enhanced by a gold nanoparticle film.

Photocurrent responses associated with the interfacial quenching of the photo-excited water-soluble zinc meso-tetra(4-carboxyphenyl)porphyrin (ZnTPPC) by ferrocene have been studied at a water|1,2-dichloroethane interface in the absence and in the presence of adsorbed gold nanoparticles. Upon addition of methanol, a mirror-like gold film is formed and an important enhancement of the photocurrent response can be observed. Intensity modulated photocurrent spectroscopy experiments (IMPS) have been performed, in order to deconvolute in the frequency domain the contribution from the competition between the recombination and the product separation arising after the electron transfer, and the attenuation associated with the resistance and interfacial capacitance (RC(int)) time constant of the cell.

Enzyme precipitate coatings of lipase on polymer nanofibers.

Lipase (LP) was immobilized on electrospun and ethanol-dispersed polystyrene-poly(styrene-co-maleic anhydride) (PS-PSMA) nanofibers (EtOH-NF) in the form of enzyme precipitate coatings (EPCs). LP precipitate coatings (EPCs-LP) were prepared in a three-step process, consisting of covalent attachment, LP precipitation, and crosslinking of precipitated LPs onto the covalently attached LPs via glutaraldehyde treatment. The LP precipitation was performed by adding various concentrations of ammonium sulfate (20-50%, w/v). EPCs-LP improved the LP activity and stability when compared to covalently attached LPs (CA-LP) and the enzyme coatings of LPs (EC-LP) without the LP precipitation. For example, the use of 40% (w/v) ammonium sulfate resulted in EPC40-LP with the highest activity, which was 4.0 and 3.6 times higher than those of CA-LP and EC-LP, respectively. After 165-day incubation under rigorous shaking at 200 rpm, the residual activities of EPC50-LP were 0.5 µM/min mg of EtOH-NF, representing 113 and 75 times higher than those of CA-LP and EC-LP, respectively. When LP was partially purified via a simple ammonium sulfate precipitation and dialysis, both activities and stabilities of EC-LP and EPC-LP could be marginally improved. It is anticipated that the improved LP activity and stability in the form of EPCs would allow for their potential applications in various bioconversion processes such as biodiesel production and ibuprofen resolution.

Acyl and oligo(lactic acid) prodrugs for PEG-b-PLA and PEG-b-PCL nano-assemblies for injection.

Poly(ethylene glycol)-block-poly(D,L-lactic acid) (PEG-b-PLA) and poly(ethylene glycol)-block-poly(ε-caprolactone) (PEG-b-PCL) form nano-assemblies, including micelles and nanoparticles, that increase the water solubility of anticancer drugs for injection. PEG-b-PLA and PEG-b-PCL are less toxic than commonly used organic solvents or solubilizers for injection, such as Cremophor EL® in Taxol®. Formulating paclitaxel in PEG-b-PLA micelles, as Genexol-PM®, permits dose escalation over Taxol®, enhancing antitumor efficacy in breast, lung and ovarian cancers. To expand the repertoire of anticancer drugs for injection, acyl and oligo(lactic acid) ester prodrugs have been synthesized for PEG-b-PLA and PEG-b-PCL nano-assemblies, compatibility, and novel nanomedicines for injection. Notably, acyl and oligo(lactic acid) taxane prodrugs delivered by PEG-b-PLA and PEG-b-PCL nano-assemblies display heightened plasma exposure, reduction in biodistribution into major organs and enhanced tumor exposure in murine tumor models, versus parent anticancer drugs in conventional formulations. As a result, acyl and oligo(lactic acid) ester prodrugs are less toxic and induce durable antitumor responses. In summary, acyl and oligo(lactic acid) ester prodrugs widen the range of anticancer drugs that can be tested safely and effectively by using PEG-b-PLA and PEG-b-PCL nano-assemblies, and they display superior anticancer efficacy over parent anticancer drugs, which are often approved products. Oligo(lactic acid) ester taxane prodrugs are in pre-clinical development as novel drug combinations and immunotherapy combinations for cancer therapy.

A short PEG linker alters the in vivo pharmacokinetics of trastuzumab to yield high-contrast immuno-PET images.

The prolonged blood circulation of the radiolabeled antibody conjugates is problematic when using immuno-PET imaging due to the increased radiation exposure and longer hospitalization required until sufficient contrast develops. In contrast to the prevailing belief that PEGylation prolongs blood retention time, we observed that a PEGylated antibody with a short PEG8 linker cleared much faster from the blood while maintaining tumor uptake compared to its non-PEGylated counterpart. Breast tumors were clearly visualized with a very high tumor-to-background ratio as early as 24 h after injection in immuno-positron emission tomography (PET) imaging.

HPMA-based star polymer biomaterials with tuneable structure and biodegradability tailored for advanced drug delivery to solid tumours.

Design, controlled synthesis, physico-chemical and biological characteristics of novel well-defined biodegradable star-shaped copolymers intended for advanced drug delivery is described. These new biocompatible star copolymers were synthesised by grafting monodispersed semitelechelic linear (sL) N-(2-hydroxypropyl)methacrylamide copolymers onto a 2,2-bis(hydroxymethyl)propionic acid (bisMPA)-based polyester dendritic core of various structures. The hydrodynamic diameter of the star copolymer biomaterials can be tuned from 13 to 31 nm and could be adjusted to a given purpose by proper selection of the bisMPA dendritic core type and generation and by considering the sL copolymer molecular weight and polymer-to-core molar ratio. The hydrolytic degradation was proved for both the star copolymers containing either dendron or dendrimer core, showing the spontaneous hydrolysis in duration of few weeks. Finally, it was shown that the therapy with the biodegradable star conjugate with attached doxorubicin strongly suppresses the tumour growth in mice and is fully curative in most of the treated animals at dose corresponding approximately to one fourth of maximum tolerated dose (MTD) value. Both new biodegradable systems show superior efficacy and tumour accumulation over the first generation of star copolymers containing non-degradable PAMAM core.

Combination of cupric ion with hydroxylamine and hydrogen peroxide for the control of bacterial biofilms on RO membranes.

Combinations of Cu(II) with hydroxylamine (HA) and hydrogen peroxide (H2O2) (i.e., Cu(II)/HA, Cu(II)/H2O2, and Cu(II)/HA/H2O2 systems) were investigated for the control of P. aeruginosa biofilms on reverse osmosis (RO) membranes. These Cu(II)-based disinfection systems effectively inactivated P. aeruginosa cells, exhibiting different behaviors depending on the state of bacterial cells (planktonic or biofilm) and the condition of biofilm growth and treatment (normal or pressurized condition). The Cu(II)/HA and Cu(II)/HA/H2O2 systems were the most effective reagents for the inactivation of planktonic cells. However, these systems were not effective in inactivating cells in biofilms on the RO membranes possibly due to the interactions of Cu(I) with extracellular polymeric substances (EPS), where biofilms were grown and treated in center for disease control (CDC) reactors. Different from the results using CDC reactors, in a pressurized cross-flow RO filtration unit, the Cu(II)/HA/H2O2 treatment significantly inactivated biofilm cells formed on the RO membranes, successfully recovering the permeate flux reduced by the biofouling. The pretreatment of feed solutions by Cu(II)/HA and Cu(II)/HA/H2O2 systems (applied before the biofilm formation) effectively mitigated the permeate flux decline by preventing the biofilm growth on the RO membranes.

Physiological and Metabolomic Analysis of Issatchenkia orientalis MTY1 With Multiple Tolerance for Cellulosic Bioethanol Production.

Yeast with multiple tolerance onto harsh conditions has a number of advantages for bioethanol production. In this study, an alcohol yeast of Issatchenkia orientalis MTY1 is isolated in a Korean winery and its multiple tolerance against high temperature and acidic conditions is characterized in microaerobic batch cultures and by metabolomic analysis. In a series of batch cultures using 100 g L-1 glucose, I. orientalis MTY1 possesses wider growth ranges at pH 2-8 and 30-45 °C than a conventional yeast of Saccharomyces cerevisiae D452-2. Moreover, I. orientalis MTY1 showes higher cell growth and ethanol productivity in the presence of acetic acid or furfural than S. cerevisiae D452-2. I. orientalis MTY1 produces 41.4 g L-1 ethanol with 1.5 g L-1 h-1 productivity at 42 °C and pH 4.2 in the presence of 4 g L-1 acetic acid, whereas a thermo-tolerant yeast of Kluyvermyces marxianus ATCC36907 does not grow. By metabolomics by GC-TOF MS and statistical analysis of 125 metabolite peaks, it is revealed that the thermo-tolerance of I. orientalis MTY1 might be ascribed to higher contents of unsaturated fatty acids, purines and pyrimidines than S. cerevisiae D452-2. Conclusively, I. orientalis MTY1 could be a potent workhorse with multiple tolerance against harsh conditions considered in cellulosic bioethanol production.