RESUMO
ABSTRACT: The purpose of this study was to investigate the type and frequency of use of treatment modalities (Tx-Mods) in patients with syndromic craniosynostosis (SC) using longitudinal follow-up data. A total of 28 patients with SC (24 Crouzon, 2 Apert, and 2 Antley-Bixler syndromes), who were treated at the Department of Orthodontics, Seoul National University Dental Hospital, Seoul, South Korea between 1998 and 2020, was included. According to the degree of midface hypoplasia (MH) at the initial visit (T1), the patients were divided into the mild-MH (78°≤SNA < 80°, n = 8), moderate-MH (76≤SNA < 78°, n = 7), and severe-MH (SNA < 76°, n = 13) groups. T1-age and Tx-Mods, including cal-varial surgery (CALS), orthopedic treatment (OPT), fixed orthodontic treatment, and midface advancement surgery in childhood (MAS-child) and adulthood (MAS-adult), were investigated. Complexity of MAS-adult was graded as follows: 0, no surgery; 1, orthognathic surgery; 2, distraction osteogenesis (DOG); 3, combination of distraction osteogenesis and orthognathic surgery. Then, statistical analysis was performed. Percentage distribution of Tx-Mods was 71.4% in CALS, 21.4% in MAS-child, 42.9% in OPT, 100% in fixed orthodontic treatment, and 89.3% in MAS-adult. 92.9% of patients underwent MAS more than once. The number of MAS increased according to the severity of MH ( P < 0.05). The complexity of MAS-adult increased as T1-age and severity of MH increased (all P < 0.05); whereas it decreased when CALS and OPT were performed (all P < 0.05). However, MAS in childhood did not guarantee the avoidance of additional MAS in adulthood ( P > 0.05). These findings may be used as basic guidelines for successful treatment planning and prognosis prediction in patients with SC.
Assuntos
Disostose Craniofacial , Craniossinostoses , Osteogênese por Distração , Humanos , Disostose Craniofacial/cirurgia , Craniossinostoses/etiologia , Craniossinostoses/cirurgia , Seguimentos , Osteogênese por Distração/efeitos adversos , Osteotomia de Le FortRESUMO
ABSTRACT: The purpose of this study was to investigate the phenotypes and treatment modalities (Tx-Mod) in patients with Treacher-Collins syndrome (TCS) using a TCS severity index (TSI). The sample consisted of 14 Korean TCS patients treated at the Department of Orthodontics, Seoul National University Dental Hospital during 1998 to 2019. The TSI was calculated by adding the scores from the number of deformity-involved midface structures (eye, ear, zygoma) and the degree of mandibular hypoplasia (Pruzansky-Kaban type, gonial angle, Sella-Nasion-B point angle). The deformity-involved midface structure, degree of mandibular hypoplasia, oral manifestations, dental phenotypes, and Tx-Mod types were investigated using descriptive statistics. The TSI classified the subjects into 2 mild, 6 moderate, and 6 severe cases. The severity of ear and zygoma deformities, degree of condylar hypoplasia (Pruzansky-Kaban type), clockwise-rotated morphology (gonial angle) and retrusive position (Sella-Nasion-B point angle) of the mandible, and frequency of oral/craniofacial cleft, openbite, congenitally missing tooth and impacted tooth showed a tendency of increase from mild to severe TCS cases. After growth observation (78.6%), diverse combinations of Tx-Mods were applied except for functional appliance therapy. Surgical procedures for eye, ear, and zygoma reconstruction were performed on all patients (100%), whereas fixed orthodontic treatment, mandibular distraction osteogenesis, and orthognathic surgery were performed on 50% of patients. Surgical procedure for hearing improvement was the most frequent Tx-Mod (78.6%). The main desires of TCS patients were to obtain the facial esthetics in the midface and to improve hearing function. The TSI might provide a primary data for individualized diagnosis and treatment planning.
Assuntos
Disostose Mandibulofacial , Osteogênese por Distração , Humanos , Mandíbula , Disostose Mandibulofacial/cirurgia , Fenótipo , Estudos RetrospectivosRESUMO
OBJECTIVE: To investigate the phenotypes and predominant skeletodental pattern in pre-adolescent patients with Pierre-Robin sequence (PRS). METHODS: The samples consisted of 26 Korean pre-adolescent PRS patients (11 boys and 15 girls; mean age at the investigation, 9.20 years) treated at the Department of Orthodontics, Seoul National University Dental Hospital between 1998 and 2019. Dental phenotypes, oral manifestation, cephalometric variables, and associated anomalies were investigated and statistically analyzed. RESULTS: Congenitally missing teeth (CMT) were found in 34.6% of the patients (n = 9/26, 20 teeth, 2.22 teeth per patient) with 55.5% (n = 5/9) exhibiting bilaterally symmetric missing pattern. The mandibular incisors were the most common CMT (n = 11/20). Predominant skeletodental patterns included Class II relationship (57.7%), posteriorly positioned maxilla (76.9%) and mandible (92.3%), hyper-divergent pattern (92.3%), high gonial angle (65.4%), small mandibular body length to anterior cranial base ratio (65.4%), linguoversion of the maxillary incisors (76.9%), and linguoversion of the mandibular incisors (80.8%). Incomplete cleft palate (CP) of hard palate with complete CP of soft palate (61.5%) was the most frequently observed, followed by complete CP of hard and soft palate (19.2%) and CP of soft palate (19.2%) (p < 0.05). However, CP severity did not show a significant correlation with any cephalometric variables except incisor mandibular plane angle (p < 0.05). Five craniofacial and 15 extra-craniofacial anomalies were observed (53.8% patients); this implicated the need of routine screening. CONCLUSIONS: The results might provide primary data for individualized diagnosis and treatment planning for pre-adolescent PRS patients despite a single institution-based data.
RESUMO
BACKGROUND: Mandibular fractures are one of the most common types of facial fractures, the treatment of which can be delayed due to the severity of the trauma resulting in an increase of complications; thus, early evaluation of trauma severity at the time of visit is important. In South Korea, trauma patients are triaged and intensively treated in designated regional trauma centers. This study aimed to analyze the relationship between trauma severity and mandibular fracture patterns. METHODS: A medical records review was performed on patients who visited the regional trauma center at our hospital for mandibular fracture between 2009 and 2018. Epidemiologic data and mandibular fracture patterns were analyzed and compared with the conventional facial injury severity scale (FISS). RESULTS: Among 73 patients, 51 were classified as non-severe trauma patients and 22 as severe trauma patients. A higher trauma severity was associated with older age (odds ratio [OR], 1.164; 95% confidence interval [CI], 1.057-1.404) and lower risk was associated with fractures located in the angle (OR, 0.001; 95% CI, 0-0.022), condylar process (OR, 0.001; 95% CI, 0-0.28), and coronoid process (OR, 0.004; 95% CI, 0-0.985). The risk was lower when the injury mechanism was a pedestrian traffic accident (OR, 0.004; 95% CI, 0-0.417) or fall (OR, 0.004; 95% CI, 0-0.663) compared with an in-car traffic accident. Higher FISS (OR, 1.503; 95% CI, 1.155-2.049) was associated with a higher trauma severity. The proposed model was found to predict the trauma severity better than the model using FISS (p< 0.001). CONCLUSION: Age, location of mandibular fractures, and injury mechanism showed significant relationships with the trauma severity. Epidemiologic data and patterns of mandibular fractures could predict the trauma severity better than FISS.
RESUMO
Many volatile compounds, such as isoprene, a precursor used in the synthesis of natural rubber, have been produced through fermentation using genetically engineered microorganisms. Despite this biotechnological success, measuring the concentrations of volatile compounds during fermentation is difficult because of their high volatility. In current systems, off-line analytical methods usually lead to product loss, whereas on-line methods raise the production cost due to the requirement of complex devices. Here, we developed a novel on-line gas chromatography (GC)-based system for analyzing the concentration of isoprene with the aim to minimize the cost and requirement for devices as compared to current strategies. In this system, a programmable logic controller is used to combine conventional GC with a syringe pump module (SPM) directly connected to the exhaust pipe of the fermentor, and isoprene-containing samples are continuously pumped from the SPM into the GC using an air cylinder recycle stream. We showed that this novel system enables isoprene analysis during fermentation with convenient equipment and without the requirement of an expensive desorption tube. Furthermore, this system may be extended to the detection of other volatile organic compounds in fermentation or chemical processes.
Assuntos
Eletrocromatografia Capilar , Fermentação/fisiologia , Compostos Orgânicos Voláteis/química , Compostos Orgânicos Voláteis/metabolismo , Aerobiose , Reatores Biológicos , Butadienos/química , Butadienos/metabolismo , Eletrocromatografia Capilar/instrumentação , Eletrocromatografia Capilar/métodos , Cromatografia Gasosa/instrumentação , Cromatografia Gasosa/métodos , Cromatografia Gasosa-Espectrometria de Massas/instrumentação , Cromatografia Gasosa-Espectrometria de Massas/métodos , Hemiterpenos/química , Hemiterpenos/metabolismo , Borracha/química , VolatilizaçãoRESUMO
PURPOSE: To compare the remineralization of incipient artificial interproximal caries in the presence of three glass-ionomer cements (highly-filled glass-ionomer cement, compomer, resin-modified glass-ionomer cement) and a resin composite (control). METHODS: Proximal restorations were simulated by placing tooth specimens and the various glass-ionomer cements in closed containers with artificial saliva at 37 degrees C and pH 7.0 for 30 days with constant circulation. Tomographic images were obtained with a micro CT scanner at 90, 180, and 270 days, and density-measuring software was used to calculate the micro-density of artificial caries lesions in the specimens. The mean density changes were compared between groups in order to evaluate the effects of remineralization. All data were analyzed using one-way ANOVA and the post-hoc Tukey multiple comparison test at P < 0.05. RESULTS: While the density of artificial caries lesions increased for all treatments, the increases for the three glass-ionomer groups were significantly higher than that for the resin group in each 3-month period. As time increased, the amount of density also increased for the glass-ionomer groups, and significant differences were found between the remineralization effects of the glass-ionomer groups. The micro CT proved to be an effective evaluation method.
Assuntos
Cárie Dentária/terapia , Esmalte Dentário/fisiopatologia , Restauração Dentária Permanente/métodos , Cimentos de Ionômeros de Vidro/química , Remineralização Dentária/métodos , Compômeros/química , Resinas Compostas/química , Cárie Dentária/diagnóstico por imagem , Cárie Dentária/fisiopatologia , Esmalte Dentário/diagnóstico por imagem , Humanos , Concentração de Íons de Hidrogênio , Processamento de Imagem Assistida por Computador/métodos , Imageamento Tridimensional/métodos , Estudos Longitudinais , Cimentos de Resina/química , Saliva Artificial/química , Temperatura , Fatores de Tempo , Tomografia Computadorizada por Raios X/métodosRESUMO
In stabilizing proteins during microsphere fabrication, the viscous solid-in-water-in-oil-in-water (S/W/O/W) method was compared to the conventional multi-emulsion W/O/W and S/O/W method. Solid proteins lyophilized with cyclodextrin derivatives and polyethylene glycol (PEG) pass through an organic solvent phase and are then embedded in aqueous microdroplets of first emulsion. Proteins were stabilized at the water/organic solvent interface by an internal aqueous phase containing viscous polysaccharides, and then can be safely encapsulated without degradation. In addition, these microspheres showed a long-term protein release followed by nearly zero-order kinetics with minimal initial burst. This means that the viscous S/W/O/W method provides a safe strategy for microsphere fabrication and has promising properties, involving the preservation of protein bioactivity, the inhibition of protein denaturation or agglomeration, and long-term protein release.
Assuntos
Composição de Medicamentos/métodos , Microesferas , Poliglactina 910/química , Proteínas/química , Química Farmacêutica , Ciclodextrinas/química , Preparações de Ação Retardada , Estabilidade de Medicamentos , Emulsões , Liofilização , Muramidase/química , Polietilenoglicóis/química , ViscosidadeRESUMO
This study investigated the suitability of microsphere formulations for extended protein delivery and complete protein release. These microspheres were prepared by a multi-emulsion method and prepared using a mixture of poly(lactide-co-glycolide) (PLGA), RG 502H (lactide:glycolide=50:50, M(W) 9300) and sucrose acetate isobutyrate (SAIB). SAIB embedded into the microspheres and mixed with PLGA, improved the efficiency of enzyme encapsulation. The in vitro release rate of lysozyme (Lys) from the microspheres was reduced due to the high viscosity of the added SAIB and less degradation of PLGA by SAIB. These properties enabled prolonged release of Lys for up to 2 months, characterized by a minimal initial burst of Lys and nearly zero-order protein release kinetics result from co-administration of sorbitan monooleate 80. When it is considered that degradation products of SAIB are inactive for labile proteins, SAIB may be regarded as a promising candidate for long-acting protein delivery.