Effect of high-flow nasal and buccal oxygenation on safe apnea time in children with open mouth: A randomized controlled trial.

BACKGROUND: High-flow nasal oxygenation is reported to prolong duration of apnea while maintaining adequate oxygen saturation with the mouth closed. Also, buccal oxygenation is known to have similar effects in obese adults. We compared the effect of these two methods on prolongation of acceptable apnea time in pediatric patients with their mouth open. METHODS: Thirty-eight patients, aged 0-10 years were randomly allocated to either the high-flow nasal oxygenation group (n = 17) or the buccal oxygenation group (n = 21). After induction of anesthesia including neuromuscular blockade, manual ventilation was initiated until the expiratory oxygen concentration reached 90%. Subsequently, ventilation was paused, and the patient's head was extended, and mouth was opened. The HFNO group received 2 L·min-1·kg-1 of oxygen, and the BO group received 0.5 L·min-1·kg-1 of oxygen. We set a target apnea time according to previous literature. When the apnea time reached the target, we defined the case as "success" in prolongation of safe apnea time and resumed ventilation. When the pulse oximetry decreased to 92% before the target apnea time, it was recorded as "failure" and rescue ventilation was given. RESULTS: The success rate of safe apnea prolongation was 100% in the high-flow nasal oxygenation group compared to 76% in the buccal oxygenation group (p = .04). Oxygen reserve index, end-tidal or transcutaneous carbon dioxide partial pressure, and pulse oximetry did not differ between groups. CONCLUSION: High-flow nasal oxygenation is effective in maintaining appropriate arterial oxygen saturation during apnea even in children with their mouth open and is superior to buccal oxygenation. Buccal oxygenation may be a good alternative when high-flow nasal oxygenation is not available.

Surgical vs nonsurgical treatments in patients with anterior open-bite have similar effects in occlusal function: A 2-year follow-up study.

INTRODUCTION: This study aimed to investigate changes in bite force (BF) and occlusal contact area after anterior open-bite (AOB) treatment and compare the changes in surgical vs nonsurgical treatment. METHODS: This retrospective study included patients with AOB compared with normal occlusion. AOB was corrected by either intrusion of the maxillary molars (intrusion group, n = 19) or orthognathic surgery (surgery group, n = 37). The control group (n = 35) had a normal overbite relationship. Records of lateral cephalograms, BF, and occlusal contact area taken before (T0), immediately after (T1), and 2 years after (T2) orthodontic treatment were compared within and among the 3 groups. RESULTS: The open-bite group, including intrusion and surgery groups, had a lower BF and less occlusal contact area than the control group at T0 and T1 (P <0.001). However, there were no significant differences among the 3 groups at T2 (P >0.05). The intrusion and surgery groups showed no significant differences throughout the observation period extending from T0 to T2 (P >0.05). Although BF and occlusal contact area decreased at T1 compared with T0, they increased during retention and showed higher values at T2 than at T0. CONCLUSIONS: Treatment of AOB improved BF and occlusal contact area 2 years posttreatment. Orthognathic surgery and molar intrusion using orthodontic miniscrews can improve occlusal function similarly. Orthodontists can select either method depending on malocclusion severity and patient demand.

Treatment outcome comparison of Invisalign vs fixed appliance treatment in first premolar extraction patients.

INTRODUCTION: In this study, we compared the dentitional changes after Invisalign and conventional orthodontic treatment with 4 first premolar extractions. METHODS: This retrospective study included 57 patients whose orthodontic treatment involved the extraction of 4 first premolars because of bialveolar protrusion. A total of 27 patients were treated with Invisalign (mean age, 25.5 ± 5.2 years) and 30 patients with the fixed appliance (mean age, 24.4 ± 5.8 years). The angular and linear changes of the maxillary and mandibular central incisors, second premolars, first molars, and second molars were measured from the recordings on the basis of the lateral cephalograms taken before and after treatment. The angular changes of the canines and second premolars were measured using panoramic radiographs. RESULTS: The overbite and interincisal angle increased significantly in the Invisalign group compared with in the conventional fixed appliance group (P <0.05). The maxillary central incisors showed increased lingual tipping in the Invisalign group (P <0.05), whereas there was no statistically significant difference in the angular change of the mandibular incisors between groups (P >0.05). The maxillary first and second molars showed mesial tipping in the Invisalign group (P <0.05). The maxillary second premolars, first and second molars, and the mandibular second molars showed mesial movement in the Invisalign group (P <0.05). CONCLUSIONS: The Invisalign group showed more statistically significant lingual tipping of the maxillary central incisors, distal tipping of the maxillary canines, and mesial tipping of the maxillary first and second molars after maximum retraction of the anterior teeth compared with the fixed appliance group.

Differences in the 3-dimensional aging changes of the lips among female adults with skeletal Class I, II, and III malocclusion.

INTRODUCTION: The objective of this study was to evaluate and compare the 3-dimensional (3D) aging changes of the lips among adult skeletal Class I, II, and III malocclusion. METHODS: Female adult orthodontic patients aged 20-50 years with pretreatment cone-beam computed tomography scans were retrospectively classified according to age (20s [20-29 years], 30s [30-39 years], and 40s [40-49 years]) and then subclassified by malocclusion into skeletal Class I, II, and III relationship (9 groups; n = 30 per group). Positional differences in midsagittal and parasagittal soft-tissue landmarks and 3D morphologic aging changes of the lips were evaluated using cone-beam computed tomography scans. RESULTS: Labiale superius and cheilion for patients in their 40s indicated a significant downward and backward position compared with those in their 20s, regardless of skeletal classifications (P <0.05). Accordingly, the upper lip height decreased, and the mouth width increased significantly (P <0.05). For Class III malocclusion, the upper lip vermilion angle was greater for patients in their 40s than those in their 20s (P <0.05), whereas the lower lip vermilion angle was only lower for patients with Class II malocclusion (P <0.05). CONCLUSIONS: Middle-aged adult females (40-49 years) had a lower upper lip height and greater mouth width than those in their 20s, regardless of skeletal malocclusion. However, prominent morphologic aging changes of the lips were noted on the upper lip for skeletal Class III malocclusion and the lower lip for skeletal Class II malocclusion, implying that the underlying skeletal features (or malocclusion) may influence 3D aging changes of the lips.

Factors influencing the successful eruption of the maxillary third molar after extraction of the maxillary second molar.

INTRODUCTION: This study evaluated the occlusal status of the maxillary third molars that erupted spontaneously after extraction of the maxillary second molars and investigated the factors that influenced the occlusal status of the maxillary third molars. METHODS: We assessed 136 maxillary third molars in 87 patients. Alignment, marginal ridge discrepancy, occlusal contact, interproximal contact, and buccal overjet were used to score the occlusal status. Occlusal status was classified as good (G group), acceptable (A group), and poor (P group) for the maxillary third molar at its full eruption (T1). The Nolla's stage, long axis angle, the vertical and horizontal position of the maxillary third molar, and the maxillary tuberosity space were assessed at the time of maxillary second molar extraction (T0) and T1 to identify factors influencing the eruption of the maxillary third molar. RESULTS: G, A, and P groups comprised 47.8%, 17.6,% and 34.6% of the sample, respectively. Age was the lowest in the G group at both T0 and T1. The maxillary tuberosity space at T1 and the amount of the change of maxillary tuberosity space were the largest in the G group. There was a significant difference in the distribution of the Nolla's stage at T0. The proportions of the G group were 60.0% in stage 4, 46.8% in stages 5 and 6, 70.4% in stage 7, and 15.0% in stages 8-10. According to multiple logistic regression analysis, stages 8-10 for the maxillary third molar at T0 and the amount of the change of maxillary tuberosity were negatively associated with the G group. CONCLUSIONS: Good-to-acceptable occlusion was seen in 65.4% of the maxillary third molars after maxillary second molar extraction. Insufficient increase in the maxillary tuberosity space and Nolla stage 8 or higher at T0 negatively influenced the maxillary third molar eruption.

Sonoanatomy of the platysmal bands: What causes the platysmal band?

BACKGROUND: The platysmal band is created by the platysma muscle, a thin superficial muscle that covers the entire neck and the lower part of the face. The platysmal band appears at the anterior and posterior borders of the muscle. To date, no definite pathophysiology has been established. Here, we observed a lack of knowledge of the anatomy of the platysma muscle using ultrasonography in this study. METHODS: We conducted a descriptive, prospective study observing the platysmal band in resting and contraction states to reveal muscle changes. Twenty-four participants (aged 23-57 years) with anterior and posterior neck bands underwent ultrasonography in resting and contracted states. Ten cadavers were studied aged 67-85 years to measure the thickness of the platysma muscle at 12 points: horizontally (medial, middle, lateral) and vertically (inferior mandibular margin, hyoid bone, cricoid cartilage, superior margin of clavicle). RESULTS: The anterior and posterior borders of the platysma muscle were thicker than the middle of the platysma muscle when in a contracted state, and the muscle also had a convex shape when contracted. The thickness of the platysma muscle was not significantly different over 12 points in the resting state. During contraction, the platysma muscles contracted in the medial and lateral margins of the muscle, which was more significant in the posterior bands. CONCLUSION: The anterior and posterior platysmal bands are related to muscle thickness during contraction. These observations support the change in platysmal band treatment only at the anterior and posterior border of the muscle.

Smoking and Periodontitis Can Play a Synergistic Role in the Development of Psoriasis: A Nationwide Cohort Study.

BACKGROUND: Periodontitis is a chronic inflammatory disorder involving the periodontium. The precise nature of the association between periodontitis and psoriasis has not been determined. OBJECTIVE: This nationwide population-based study investigated the relationship between periodontitis and the risk of psoriasis. METHODS: A health screening database, which is a sub-dataset of the Korean National Health Insurance System database, was used in this study. Subjects with (n = 1,063,004) and without (n = 8,655,587) periodontitis who underwent health examinations from January to December 2009 were followed for 9 years. RESULTS: In multivariable analysis, compared to the non-periodontitis group, periodontitis patients had a significantly higher risk of developing psoriasis (hazard ratio 1.116, 95% confidence interval 1.101-1.13). Non-smokers with periodontitis had an 11% increase in risk of psoriasis and smokers with periodontitis had a 26.5% increase in risk of psoriasis compared to non-smokers without periodontitis. CONCLUSION: Our study highlights periodontitis as a potential independent risk factor for psoriasis, increasing awareness of the synergistic role of smoking and periodontitis in the pathogenesis of psoriasis.

Targeted next-generation sequencing for comprehensive genetic analysis of external apical root resorption during orthodontic treatment with premolar extraction in the Korean population.

INTRODUCTION: External apical root resorption (EARR) is one of the most common unfavorable consequences of orthodontic treatment and causes loss of tooth structure. The present study aimed to investigate the genetics of EARR using next-generation sequencing comprehensively. METHODS: Targeted next-generation sequencing was performed for comprehensive genetic analysis of 118 Korean orthodontic patients. The patients were divided into 2 groups on the basis of their EARR value. The association of clinical and genetic parameters with EARR was assessed using the χ2 test or t test for matched pairs, followed by Bonferroni correction and linear regression analysis. In addition, haplotype analysis and in silico prediction were conducted to evaluate functional effects. RESULTS: No statistically significant difference was observed between clinical and treatment-related parameters and EARR. The single nucleotide polymorphisms SPP1 rs9138 (P = 0.001) and SFRP2 rs3810765 (P = 0.04) showed only nominal significance between EARR groups. However, these 2 SNPs were not significant after Bonferroni correction for multiple testing (cutoff P = 0.05/142 = 3.52 × 10-4). Variations in SPP1 rs9138 and SFRP2 rs3810765 may be related to EARR during orthodontic treatment. In summary, not only genes related to inflammatory reactions but also those related to Wnt signaling to affect the degree of EARR during orthodontic teeth movement.

Incidence and clinical risk factors associated with the development of labial protuberances after orthodontic treatment.

INTRODUCTION: Distinct, irregular, and hard, nodular labial protuberances (LPs) that were due to differential alveolar bone modeling can be noted on the labial gingival surface of the incisors after orthodontic treatment. Clinically, LPs cause patient discomfort and esthetic issues, but information on this phenomenon is limited. This study aimed to evaluate the incidence of LPs and demonstrate the etiology and clinical risk factors associated with this phenomenon. METHODS: Differential alveolar bone modeling was defined as present (+) when ≥1 distinct LPs (diameter >1 mm) developed after orthodontic treatment by comparing pretreatment and posttreatment intraoral photographs and casts of an orthodontic patient cohort treated with fixed appliances (n = 872). The incidence rate, affected sites, and their association with age, sex, and orthodontic treatment modalities were evaluated. RESULTS: The incidence rate of differential alveolar bone modeling among orthodontic patients was 3.2% (28 out of 872). The maxillary lateral incisor region was the most frequently affected site. Males (vs females) (odds ratio, 2.56 [95% confidence interval, 1.155-5.604]), adults (aged ≥ 20 years) (vs teens) (12.84 [3.003-54.866]), and those who had orthodontic extraction (vs nonextraction) (11.60 [3.434-39.156]) demonstrated significantly higher odds of developing LPs after orthodontic treatment (P <0.05). CONCLUSIONS: The incidence rate of the development of notable LPs after orthodontic treatment was 3.2%. Adult males and those who undergo orthodontic extraction have a higher risk of developing LPs. Clinicians should be aware that distinct LPs may develop when large amounts of incisal retraction are planned in adults.

Antifungal activity, mechanical properties, and accuracy of three-dimensionally printed denture base with microencapsulated phytochemicals on varying post-polymerization time.

BACKGROUND: Studies on the antifungal activity, flexural strength, Vickers hardness, and intaglio surface trueness of three-dimensionally printed (3DP) denture bases with microencapsulated phytochemicals with respect to changes in post-polymerization time (PPT) are lacking. METHODS: Specimens of various shapes and dimensions were fabricated with a 3DP denture base resin mixed with 5 wt% phytoncide-filled microcapsules. Each specimen was subjected to different PPT protocols of 5, 10, 20, and 30 min. Specimens without microcapsules with 5-min PPT were used as the negative control group. Cell colonies were counted to evaluate antifungal activity. Three-point bending and Vickers hardness tests were performed to measure the flexural strengths and hardness of the specimens. Fourier-transform infrared spectrometry was used to inspect the degree of conversion (DC). The intaglio surface trueness was measured using root-mean-square estimates calculated by superimposition analysis. A non-parametric Kruskal-Wallis test or one-way analysis of variance was performed (α = 0.05). RESULTS: The specimens with microcapsules and 10-min PPT showed the highest antifungal activity among the tested groups. Compared with the positive control group (5-min PPT), the specimens with PPTs of 10 min or longer showed significantly higher mean flexural strength, higher DC, greater hardness, and better trueness (all, P < 0.05). Except for the difference in antifungal activity, no statistically significant differences were detected between the specimens subjected to 10-, 20-, and 30-min PPT. CONCLUSION: The 3DP denture base filled with microencapsulated phytoncide showed different antifungal activity and physical properties on changing PPT. The 3DP denture base containing phytoncide-filled microcapsules at 5 wt% concentration and subjected to 10-min PPT exhibited sufficient antifungal activity as well as mechanical properties and accuracy within clinical acceptance.

Desensitizing toothpastes for dentin sealing and tertiary dentin formation in vitro and in vivo: a comparative analysis.

BACKGROUND: Dentin hypersensitivity is a painful response to external stimuli applied to exposed dentinal tubules. Various toothpastes with active desensitizing ingredients for the relief of dentin hypersensitivity are commercially available. However, data from several studies suggest that the effects of desensitizing toothpastes are unstable and brief. This study aimed to investigate the effect of toothpastes containing CPNE7-derived oligopeptide (CPNE7-DP) and other active desensitizing ingredients in the dentin microleakage, tubule occlusion and tertiary dentin formation. METHODS: Using scanning electron microscopy (SEM), we evaluated the patency of dentinal tubules on the surface of human dentin disks after brushing experiments with the various toothpastes. Dentin was histologically evaluated in a hypersensitivity model of canine teeth, after the exposed dentin area was brushed for 6 weeks. The toothpaste used in group 1 (control) did not contain any desensitizing ingredients; that used in group 2 contained CPNE7-DP; Colgate Sensitive was used in group 3; and Sensodyne Rapid Relief was used in group 4. Finally, we conducted microleakage analysis to investigate the dentin sealing effect. The microleakage analysis data were subjected to one-way ANOVA and post-hoc Tukey tests (alpha = 0.05). RESULTS: In the SEM images, all four groups of teeth exhibited partial occlusion of the dentinal tubules on the tooth surface. In the in vivo hypersensitivity model, group 2 exhibited a newly formed tertiary dentin, whereas no new hard tissue formation was observed in groups 1, 3, and 4. Microleakage analysis revealed that the volume of dentinal fluid flow was significantly smaller in group 2 than in group 1. CONCLUSIONS: These results indicate that CPNE7-DP is a promising active ingredient with long-term dentin sealing effects.

Predicting the cut-off point for interface pressure in pressure injury according to the standard hospital mattress and polyurethane foam mattress as support surfaces.

This study aimed to investigate the interface pressure (IP) of patients using a standard hospital mattress and polyurethane foam mattress as support surfaces and present cut-off points for IP in patients who exhibited skin changes. A total of 189 inpatients enrolled from six general wards and three intensive care units at a Korean University Hospital. Skin changes were classified, and peak IP at the sacral and occipital regions was measured using a pressure scanner. Differences in IPs according to mattress type were analysed using independent t-tests. The receiver operating characteristic curve was constructed to determine the cut-off point, and the area under the curve with a 95% confidence interval was obtained using the Stata 15.1.program. The IP for a standard hospital mattress was significantly higher than that of a polyurethane foam mattress. The cut-off points for IP at the sacral region were 52.90 and 30.15 mm Hg for a standard hospital mattress and polyurethane foam mattress, respectively. The cut-off point for IP at the occipital region was 36.40 mm Hg for a polyurethane foam mattress. Using IP measurements to prevent pressure injuries is important and employ individualised interventions based on the cut-off points for different support surfaces.

Texture analysis using T1-weighted images for muscles in Charcot-Marie-Tooth disease patients and volunteers.

OBJECTIVES: To explore whether texture features using T1-weighted images correlate with fat fraction, and whether they differ between Charcot-Marie-Tooth (CMT) disease patients and volunteers. METHODS: The institutional review board approved this retrospective study, and the requirement for informed consent was waived; data of eighteen CMT patients and eighteen healthy volunteers from a previous study was used. Texture features of the muscles including mean, standard deviation (SD), skewness, kurtosis, and entropy of the signal intensity were derived from T1-weighted images. Spearman's correlation analysis was used to assess the relationship between texture features and fat fraction measured by 3D multiple gradient echo Dixon-based sequence. Mann-Whitney U test was used to compare the texture features between CMT patients and volunteers. Intraobserver and interobserver agreements for the texture features were assessed using the intraclass correlation coefficient. RESULTS: The SD (ρ = 0.256, p < 0.001) and entropy (ρ = 0.263, p < 0.001) were significantly and positively correlated with fat fraction; skewness (ρ = - 0.110, p = 0.027) and kurtosis (ρ = - 0.149, p = 0.003) were significantly and inversely correlated with fat fraction. The CMT patients showed a significantly higher SD (63.45 vs. 49.26; p < 0.001), skewness (1.06 vs. 0.56; p < 0.001), kurtosis (4.00 vs. 1.81; p < 0.001), and entropy (3.20 vs. 3.02; p < 0.001) than did the volunteers. Intraobserver and interobserver agreements were almost perfect for mean, SD, and entropy. CONCLUSIONS: Texture features using T1-weighted images correlated with fat fraction and differed between CMT patients and volunteers. KEY POINTS: • Standard deviation and entropy of muscles derived from T1-weighted images were significantly and positively correlated with the muscle fat fraction. • Mean, standard deviation, and entropy were considered highly reliable in muscle analyses. • Texture features may have the potential to diagnose early stage of intramuscular fatty infiltration.

HPV/p16-positive oropharyngeal cancer treated with transoral robotic surgery: The roles of margins, extra-nodal extension and adjuvant treatment.

PURPOSE: Human papilloma virus (HPV)-associated oropharyngeal squamous cell carcinoma (OPSCC) treatment outcomes are re-defining management. Traditional margins, the role of extranodal extension (ENE) and adjuvant treatment intensity continue to be debated. This study aimed to determine the impact of margins, ENE and adjuvant therapy on survival following transoral robotic surgery (TORS). METHODS: Patients treated with TORS at an academic center were retrospectively identified (2013-2019). Survival outcomes were evaluated using Kaplan-Meier curves. RESULTS: 48 patients were included. 40 (83%) were male. Mean age was 61.2 years. 43 (90%) were stage I. 22 (45.8%) had ENE. 31 (65%) had margins >1 mm. 38 (79%) had indications for radiation therapy; 9 (24%) refused. Chemotherapy was recommended in 36 (75%) patients; 24 (67%) refused. Locoregional control was 98%, metastasis-free survival was 96%, and disease-specific survival was 100% at 5-years. Overall survival was 95%. CONCLUSIONS: Given the high survival rate seen after TORS, it is likely that margins, ENE and adjuvant treatment may not significantly contribute to outcomes.

Using primary organotypic mouse midbrain cultures to examine developmental neurotoxicity of silver nanoparticles across two genetic strains.

Micromass culture systems have been developed as three-dimensional organotypic in vitro alternatives to test developmental toxicity. We have optimized a murine-based embryonic midbrain micromass system in two genetic strains to evaluate neurodevelopmental effects of gold-cored silver nanoparticles (AgNPs) of differing sizes and coatings-20 nm AgCitrate, 110 nm AgCitrate, and 110 nm AgPVP. AgNPs are increasingly used in consumer, commercial, and medical products for their antimicrobial properties and observations of Ag in adult and fetal brain following in vivo exposures to AgNPs have led to concerns about the potential for AgNPs to elicit adverse effects on neurodevelopment and neurological function. Cytotoxicity was assessed at three time points of development by both nominal dose and by dosimetric dose. Ag dosimetry was assessed in cultures and the gold core component of the AgNPs was used as a tracer for determination of uptake of intact AgNPs and silver dissolution from particles in the culture system. Results by both nominal and dosimetric dose show cell death increased significantly in a dose-dependent manner at later time points (days 15 and 22 in vitro) that coincide with differentiation stages of development in both strains. When assessed by dosimetric dose, cultures were more sensitive to smaller particles, despite less uptake of Ag in smaller particles in both strains.

Genetic analysis of non-syndromic familial multiple supernumerary premolars.

OBJECTIVE: Supernumerary teeth, a term describing a condition where patients have an abnormally large number of teeth, can be associated with non-syndromic or syndromic phenotypes. PDGFRs are cell surface tyrosine kinase receptors, and are involved in several aspects of tooth development. The purpose of this study was to identify causative genes of familial supernumerary teeth and the molecular pathogenesis of tooth number abnormalities through genetic analysis of a family that showed supernumerary premolars in two successive generations. MATERIAL AND METHODS: We recruited a Korean family with supernumerary premolars and performed mutational analyses to identify the underlying molecular genetic aetiology. RESULTS: Targeted exome sequencing identified a missense mutation in PDGFRB (c.C2053T, p.R685C). Sanger sequencing confirmed that three affected individuals in the patient's family were heterozygous for the mutation. CONCLUSIONS: This is the first report of a Korean family that carries a PDGFRB mutation potentially responsible for supernumerary premolars. Our results demonstrate the power of next-generation sequencing in rapidly determining the genetic aetiology of numerical tooth abnormalities.

Preparation of a porcine plasma protein composite film and its application.

To use blood released from slaughtering houses, a porcine plasma protein (PPP)/nanoclay composite film was prepared. The tensile strength and elongation at break values of the PPP composite film with 5% nanoclay were 10.01 MPa and 6.55%, respectively. The PPP composite film containing 1% grapefruit seed extract (GSE) was applied to pork meat, and the populations of inoculated Escherichia coli O157:H7 and Listeria monocytogenes in the pork meat packaged with the PPP composite film decreased by 0.8 and 1.0 log CFU/g, respectively, after 7 days of storage compared to the populations of the control. In addition, thiobarbituric acid values in the pork meat packaged with the PPP composite film were less than those of the control sample during storage. These results suggest that the PPP nanocomposite film containing 1% GSE can be used as a packaging material to maintain the quality of pork meat.

Surgical extrusion of multiple teeth with crown-root fractures: a case report with 18-months follow up.

The objective of this case report is to describe the treatment procedure involved in surgical extrusion of multiple crown-root fractures and review the critical factors to be considered for successful and predictable outcome. The treatment of complicated crown-root fracture in anterior teeth is likely to compromise function and aesthetics when approached with conventional surgical crown lengthening. Orthodontic extrusion has also been suggested; however, it is time-consuming, aesthetically compromising and hardly applicable on multiple anterior crown-root fractures due to the limited source of anchorage. To overcome the shortcomings of suggested treatment modalities, we performed atraumatic surgical extrusion of four anterior fractured teeth along with their rotation within the sockets. The teeth were gently luxated and extruded to the desired position, minimizing damage to the marginal alveolar bone and root surfaces without rigid splint. The treated teeth were functioning normally 18 months after the procedure, and the mobility and probing depths were within normal limits. Radiographs revealed functional periodontal ligament space along with lamina dura formation around the extruded roots. There was neither root resorption nor significant marginal bone loss. This technique might be a promising alternative to conventional crown lengthening, especially in the anterior zone to avoid functional or aesthetic complications.

Phase II study of pegylated liposomal doxorubicin, low-dose dexamethasone, and lenalidomide in patients with newly diagnosed multiple myeloma.

Our previous phase I/II trial of pegylated liposomal doxorubicin (PLD), low-dose dexamethasone, and lenalidomide in patients with relapsed and refractory myeloma showed an overall response rate of 75%, with 29% achieving ≥ VGPR. Here, we investigated this combination (PLD 30 or 40 mg/m(2) intravenously, day 1; dexamethasone 40 mg orally, days 1-4; lenalidomide 25 mg orally, days 1-21; administered every 28 days) in a phase II study in patients with newly diagnosed symptomatic multiple myeloma to determine its efficacy and tolerability (ClinicalTrials.gov NCT00617591). At best response, patients could proceed with high-dose melphalan or with maintenance lenalidomide and dexamethasone. In 57 patients, we found that the overall response rate and rate of very good partial response and better on intent-to-treat, our primary endpoints, were 77.2% and 42.1%, respectively, with responses per the International Myeloma Working Group. Median progression-free survival was 28 months (95% CI 18.1-34.8), with 1- and 2-year overall survival rates of 98.1 and 79.6%. During induction, grade 3/4 toxicities were neutropenia (49.1%), anemia (15.8%), thrombocytopenia (7%), fatigue (14%), febrile neutropenia (8.8%), and venous thromboembolic events (8.8%). During maintenance, grade 3/4 toxicities were mainly hematologic. We found this combination to be active in patients with newly diagnosed myeloma, with results comparable to other lenalidomide-based induction strategies without proteasome inhibition. In addition, maintenance therapy with lenalidomide was well tolerated.

Novel Clinical Anatomical Consideration of the Superficial and Deep Layers of the Deep Temporal Fascia.

BACKGROUND: The deep temporal fascia provides anchoring during thread lifting, which is a minimally invasive face-lifting procedure. However, anatomical studies involving the deep temporal fascia in addition to effective and safe thread-lifting procedures are scarce. The authors clarified the anatomy of the superficial layer of the deep temporal fascia and its surrounding structure using ultrasonography, histologic sections, and cadaveric dissection to propose an effective thread-lifting procedure guideline. METHODS: The authors included 20 healthy young participants from the Republic of Korea. Real-time, two-dimensional, B-mode ultrasonography was performed. Longitudinal scanning was performed along three vertical lines: the line passing through the jugale, the anterior margin of the condylar process of the mandible, and the midpoint between the jugale and anterior margin of the condylar process. Histologic samples from three fresh adult cadavers were harvested from 2.5 cm above and below the zygomatic arch. Eighteen fresh adult hemifaces of cadavers from the Republic of Korea (six men and three women, aged 67.3 ± 7.2 years) were used to confirm the morphology of the deep temporal fascia. RESULTS: The superficial layer of the deep temporal fascia crossed the zygomatic arch and was connected to the origin of the zygomaticus major muscle at the line passing through the jugale. The superficial layer continued inferiorly to the parotidomasseteric fascia at the line passing through the midpoint and condylar process of the mandible. CONCLUSION: This study yielded the novel anatomy of the superficial layer of the deep temporal fascia, and this anatomical structure may be used for an ideal thread-lifting procedure.