Cell cloning-on-the-spot by using an attachable silicone cylinder.

Cell cloning is a laboratory routine to isolate and keep particular properties of cultured cells. Transfected or other genetically modified cells can be selected by the traditional microbiological cloning. In addition, common laboratory cell lines are prone to genotypic drift during their continual culture, so that supplementary cloning steps are often required to maintain correct lineage phenotypes. Here, we designed a silicone-made attachable cloning cylinder, which facilitated an easy and bona fide cloning of interested cells. This silicone cylinder was easy to make, showed competent stickiness to laboratory plastics including culture dishes, and hence enabled secure isolation and culture for days of selected single cells, especially, on the spots of preceding cell-plating dishes under microscopic examination of visible cellular phenotypes. We tested the silicone cylinder in the monoclonal subcloning from a heterogeneous population of a breast cancer cell line, MDA-MB-231, and readily established independent MDA-MB-231 subclones showing different sublineage phenotypes.

Characterization and preparation of bio-tubular scaffolds for fabricating artificial vascular grafts by combining electrospinning and a 3D printing system.

The last decade has seen artificial blood vessels composed of natural polymer nanofibers grafted into human bodies to facilitate the recovery of damaged blood vessels. However, electrospun nanofibers (ENs) of biocompatible materials such as chitosan (CTS) suffer from poor mechanical properties. This study describes the design and fabrication of artificial blood vessels composed of a blend of CTS and PCL ENs and coated with PCL strands using rapid prototyping technology. The resulting tubular vessels exhibited excellent mechanical properties and showed that this process may be useful for vascular reconstruction.

Evaluation of Human Platelet Lysate as an Alternative to Fetal Bovine Serum for Potential Clinical Applications of Stem Cells from Human Exfoliated Deciduous Teeth.

In recent years, there has been a surge in demand for and research focus on cell therapy, driven by the tissue-regenerative and disease-treating potentials of stem cells. Among the candidates, dental pulp stem cells (DPSCs) or human exfoliated deciduous teeth (SHED) have garnered significant attention due to their easy accessibility (non-invasive), multi-lineage differentiation capability (especially neurogenesis), and low immunogenicity. Utilizing these stem cells for clinical purposes requires careful culture techniques such as excluding animal-derived supplements. Human platelet lysate (hPL) has emerged as a safer alternative to fetal bovine serum (FBS) for cell culture. In our study, we assessed the impact of hPL as a growth factor supplement for culture medium, also conducting a characterization of SHED cultured in hPL-supplemented medium (hPL-SHED). The results showed that hPL has effects in enhancing cell proliferation and migration and increasing cell survivability in oxidative stress conditions induced by H2O2. The morphology of hPL-SHED exhibited reduced size and elongation, with a differentiation capacity comparable to or even exceeding that of SHED cultured in a medium supplemented with fetal bovine serum (FBS-SHED). Moreover, no evidence of chromosome abnormalities or tumor formation was detected. In conclusion, hPL-SHED emerges as a promising candidate for cell therapy, exhibiting considerable potential for clinical investigation.

Cyclic stretch induced epigenetic activation of periodontal ligament cells.

Periodontal ligament (PDL) cells play a crucial role in maintaining periodontal integrity and function by providing cell sources for ligament regeneration. While biophysical stimulation is known to regulate cell behaviors and functions, its impact on epigenetics of PDL cells has not yet been elucidated. Here, we aimed to investigate the cytoskeletal changes, epigenetic modifications, and lineage commitment of PDL cells following the application of stretch stimuli to PDL. PDL cells were subjected to stretching (0.1 Hz, 10 %). Subsequently, changes in focal adhesion, tubulin, and histone modification were observed. The survival ability in inflammatory conditions was also evaluated. Furthermore, using a rat hypo-occlusion model, we verified whether these phenomena are observed in vivo. Stretched PDL cells showed maximal histone 3 acetylation (H3Ace) at 2 h, aligning perpendicularly to the stretch direction. RNA sequencing revealed stretching altered gene sets related to mechanotransduction, histone modification, reactive oxygen species (ROS) metabolism, and differentiation. We further found that anchorage, cell elongation, and actin/microtubule acetylation were highly upregulated with mechanosensitive chromatin remodelers such as H3Ace and histone H3 trimethyl lysine 9 (H3K9me3) adopting euchromatin status. Inhibitor studies showed mechanotransduction-mediated chromatin modification alters PDL cells behaviors. Stretched PDL cells displayed enhanced survival against bacterial toxin (C12-HSL) or ROS (H2O2) attack. Furthermore, cyclic stretch priming enhanced the osteoclast and osteoblast differentiation potential of PDL cells, as evidenced by upregulation of lineage-specific genes. In vivo, PDL cells from normally loaded teeth displayed an elongated morphology and higher levels of H3Ace compared to PDL cells with hypo-occlusion, where mechanical stimulus is removed. Overall, these data strongly link external physical forces to subsequent mechanotransduction and epigenetic changes, impacting gene expression and multiple cellular behaviors, providing important implications in cell biology and tissue regeneration.

Decellularized matrix bioink with gelatin methacrylate for simultaneous improvements in printability and biofunctionality.

Gelatin methacrylate (GelMA) bioink has been widely used in bioprinting because it is a printable and biocompatible biomaterial. However, it is difficult to print GelMA bioink without any temperature control because it has a thermally-sensitive rheological property. Therefore, in this study, we developed a temperature-controlled printing system in real time without affecting the viability of the cells encapsulated in the bioink. In addition, a skin-derived decellularized extracellular matrix (SdECM) was printed with GelMA to better mimic the native tissue environment compared with solely using GelMA bioink with the enhancement of structural stability. The temperature setting accuracy was calculated to be 98.58 ± 1.8 % for the module and 99.48 ± 1.33 % for the plate from 5 °C to 37 °C. The group of the temperature of the module at 10 °C and the plate at 20 °C have 93.84 % cell viability with the printable range in the printability window. In particular, the cell viability and proliferation were increased in the encapsulated fibroblasts in the GelMA/SdECM bioink, relative to the GelMA bioink, with a morphology that significantly spread for seven days. The gene expression and growth factors related to skin tissue regeneration were relatively upregulated with SdECM components. In the bioprinting process, the rheological properties of the GelMA/SdECM bioink were successfully adjusted in real time to increase printability, and the native skin tissue mimicked components providing tissue-specific biofunctions to the encapsulated cells. The developed bioprinting strategies and bioinks could support future studies related to the skin tissue reconstruction, regeneration, and other medical applications using the bioprinting process.

Human Fibroblast Growth Factor-Treated Adipose-Derived Stem Cells Facilitate Wound Healing and Revascularization in Rats with Streptozotocin-Induced Diabetes Mellitus.

Diabetes mellitus contributes to 15-25% of all chronic foot ulcers. Peripheral vascular disease is a cause of ischemic ulcers and exacerbates diabetic foot disease. Cell-based therapies are viable options to restore damaged vessels and induce the formation of new vessels. Adipose-derived stem cells (ADSCs) have the potential for angiogenesis and regeneration because of their greater paracrine effect. Preclinical studies are currently using other forced enhancement techniques (e.g., genetic modification or biomaterials) to increase the efficacy of human ADSC (hADSC) autotransplantation. Unlike genetic modifications and biomaterials, many growth factors have been approved by the equivalent regulatory authorities. This study confirmed the effect of enhanced human ADSC (ehADSC)s with a cocktail of FGF and other pharmacological agents to promote wound healing in diabetic foot disease. In vitro, ehADSCs exhibited a long and slender spindle-shaped morphology and showed significantly increased proliferation. In addition, it was shown that ehADSCs have more functionalities in oxidative stress toleration, stem cell stemness, and mobility. In vivo, the local transplantation of 1.2 × 106 hADSCs or ehADSCs was performed in animals with diabetes induced by STZ. The ehADSC group showed a statistically decreased wound size and increased blood flow compared with the hADSC group and the sham group. Human Nucleus Antigen (HNA) positive cells were observed in some ADSC-transplanted animals. The ehADSC group showed a relatively higher portion of HNA-positive animals than the hADSC group. The blood glucose levels showed no significant difference among the groups. In conclusion, the ehADSCs showed a better performance in vitro, compared with conventional hADSCs. Additionally, a topical injection of ehADSCs into diabetic wounds enhanced wound healing and blood flow, while improving histological markers suggesting revascularization.

An osteogenic bioink composed of alginate, cellulose nanofibrils, and polydopamine nanoparticles for 3D bioprinting and bone tissue engineering.

Bioprinting is an emerging technology for manufacturing cell-laden three-dimensional (3D) scaffolds, which are used to fabricate complex 3D constructs and provide specific microenvironments for supporting cell growth and differentiation. The development of bioinks with appropriate printability and specific bioactivities is crucial for bioprinting and tissue engineering applications, including bone tissue regeneration. Therefore, to produce functional bioinks for osteoblast printing and bone tissue formation, we formulated various nanocomposite hydrogel-based bioinks using natural and biocompatible biomaterials (i.e., alginate, tempo-oxidized cellulose nanofibrils (TOCNF), and polydopamine nanoparticles (PDANPs)). Rheological studies and printability tests revealed that bioinks containing 1.5% alginate and 1.5% TOCNF in the presence or absence of PDANP (0.5%) are suitable for 3D printing. Furthermore, in vitro studies of 3D-printed osteoblast-laden scaffolds indicated that the 0.5% PDANP-incorporated bioink induced significant osteogenesis. Overall, the bioink consisting of alginate, TOCNF, and PDANPs exhibited excellent printability and bioactivity (i.e., osteogenesis).

Simultaneous loss of TSC1 and DEPDC5 in skeletal and cardiac muscles produces early-onset myopathy and cardiac dysfunction associated with oxidative damage and SQSTM1/p62 accumulation.

By promoting anabolism, MTORC1 is critical for muscle growth and maintenance. However, genetic MTORC1 upregulation promotes muscle aging and produces age-associated myopathy. Whether MTORC1 activation is sufficient to produce myopathy or indirectly promotes it by accelerating tissue aging is elusive. Here we examined the effects of muscular MTORC1 hyperactivation, produced by simultaneous depletion of TSC1 and DEPDC5 (CKM-TD). CKM-TD mice produced myopathy, associated with loss of skeletal muscle mass and force, as well as cardiac failure and bradypnea. These pathologies were manifested at eight weeks of age, leading to a highly penetrant fatality at around twelve weeks of age. Transcriptome analysis indicated that genes mediating proteasomal and macroautophagic/autophagic pathways were highly upregulated in CKM-TD skeletal muscle, in addition to inflammation, oxidative stress, and DNA damage signaling pathways. In CKM-TD muscle, autophagosome levels were increased, and the AMPK and ULK1 pathways were activated; in addition, autophagy induction was not completely blocked in CKM-TD myotubes. Despite the upregulation of autolysosomal markers, CKM-TD myofibers exhibited accumulation of autophagy substrates, such as SQSTM1/p62 and ubiquitinated proteins, suggesting that the autophagic activities were insufficient. Administration of a superoxide scavenger, tempol, normalized most of these molecular pathologies and subsequently restored muscle histology and force generation. However, CKM-TD autophagy alterations were not normalized by rapamycin or tempol, suggesting that they may involve non-canonical targets other than MTORC1. These results collectively indicate that the concomitant muscle deficiency of TSC1 and DEPDC5 can produce early-onset myopathy through accumulation of oxidative stress, which dysregulates myocellular homeostasis.Abbreviations: AMPK: AMP-activated protein kinase; CKM: creatine kinase, M-type; COX: cytochrome oxidase; DEPDC5: DEP domain containing 5, GATOR1 subcomplex subunit; DHE: dihydroethidium; EDL: extensor digitorum longus; EIF4EBP1: eukaryotic translation initiation factor 4E binding protein 1; GAP: GTPase-activating protein; GTN: gastrocnemius; MTORC1: mechanistic target of rapamycin kinase complex 1; PLA: plantaris; QUAD: quadriceps; RPS6KB/S6K: ribosomal protein S6 kinase beta; SDH: succinate dehydrogenase; SOL: soleus; SQSTM1: sequestosome 1; TA: tibialis anterior; TSC1: TSC complex subunit 1; ULK1: unc-51 like autophagy activating kinase 1.

Testosterone Replacement Therapy in Hypogonadal Men and Myocardial Infarction Risk: Systematic Review & Meta-Analysis.

Testosterone replacement therapy (TRT) has become increasingly popular over the years and there has been an increasing debate on whether testosterone replacement should be offered to older men due to its association with cardiovascular events. In this study, we evaluated the risk of myocardial infarction (MI) associated with TRT in hypogonadal men through a meta-analysis. We carried out the analysis by following the Preferred Reporting Items for Systematic Review and Meta-Analyses (PRISMA) guidelines and conducted a literature search utilizing the following databases: Google Scholar, PubMed, Science Direct, Cochrane Library trials, and ClinicalTrials.gov. The search strategy resulted in a total of 782 articles, after applying our inclusion and exclusion criteria. Six observational studies and two randomized controlled trials (RCTs) were included for the analysis. A total of 55,806 hypogonadal men with baseline testosterone levels <300ng/mL were included in the analysis. The intervention group received testosterone in various routes including transdermal patches, gels, mouth patches, testosterone injections, and deposits. The incidence of MI was taken to be the primary measure outcomes. The pooled data from eight studies showed MI incidence in 249 out of 11,720 (2.1%) in the TRT group and 1420 out of 33,086 (4.3%) in the control group. The pooled OD showed no statistically significant association of TRT and MI compared to the control group (OR = 0.76, 95% CI 0.36-1.31; p=0.48). The model revealed high heterogeneity with I2 =79%. With sensitivity analysis and, excluding two studies out of the eight, the pooled data was able to achieve low heterogeneity with I2 = 0%. The newly pooled data from six studies showed MI incidence in 226 out of 10,137 (2.2%) in the TRT group and 969 out of 36,304 (2.7%) in the control group. The pooled OD shows no statistical significance in the association between TRT treatment and MI compared to the control group. (OR =0.87, 95% CI 0.75-1.01; P =0.08). It appears that TRT does not increase the risk of MI as compared to the non-intervention group. Further RCTs with greater population size are needed that could produce more solid results, allowing more definitive conclusions to be made on this topic.

Surface modification of a three-dimensional polycaprolactone scaffold by polydopamine, biomineralization, and BMP-2 immobilization for potential bone tissue applications.

Three-dimensional (3D) bioprinting is a free-form fabrication technique enabling fine feature control for tissue engineering applications. Especially, 3D scaffolds capable of supporting cell attachment, proliferation, and osteogenic differentiation are a prerequisite for bone tissue regeneration. Herein, we elaborated this approach to produce a 3D polycaprolactone (PCL) scaffold with long-term osteogenic activity. Specifically, we coated polydopamine (PDA) on 3D PCL scaffolds, subsequently deposited hydroxyapatite (HA) nanoparticles via biomimetic mineralization, and finally immobilized bone morphogenetic protein-2 (BMP-2). Material properties were characterized and compared with various 3D scaffolds, including PCL, PDA-coated PCL (PCL/PDA), and PDA-coated and HA-deposited PCL (PCL/PDA/HA). In vitro cell culture studies with osteoblasts revealed that the PCL/PDA/HA scaffolds immobilized with BMP-2 showed long-term retention of BMP-2 (for up to 21 days) and significantly increased osteoblast proliferation and osteogenic differentiation, as evidenced by metabolic activity, alkaline phosphatase activity, and calcium deposition. We believe that this multifunctional osteogenic 3D scaffold will be useful for bone tissue engineering applications.

Bio-plotted hydrogel scaffold with core and sheath strand-enhancing mechanical and biological properties for tissue regeneration.

Three-dimensional bio-plotted scaffolds constructed from encapsulated biomaterials or so-called "bio-inks" have received much attention for tissue regeneration applications, as advances in this technology have enabled more precise control over the scaffold structure. As a base material of bio-ink, sodium alginate (SA) has been used extensively because it provides suitable biocompatibility and printability in terms of creating a biomimetic environment for cell growth, even though it has limited cell-binding moiety and relatively weak mechanical properties. To improve the mechanical and biological properties of SA, herein, we introduce a strategy using hydroxyapatite (HA) nanoparticles and a core/sheath plotting (CSP) process. By characterizing the rheological and chemical properties and printability of SA and SA/HA-blended inks, we successfully fabricated bio-scaffolds using CSP. In particular, the mechanical properties of the scaffold were enhanced with increasing concentrations of HA particles and SA hydrogel. Specifically, HA particles blended with the SA hydrogel of core strands enhanced the biological properties of the scaffold by supporting the sheath part of the strand encapsulating osteoblast-like cells. Based on these results, the proposed scaffold design shows great promise for bone-tissue regeneration and engineering applications.

3D Printing of Bone-Mimetic Scaffold Composed of Gelatin/ß-Tri-Calcium Phosphate for Bone Tissue Engineering.

3D printed scaffolds composed of gelatin and ß-tri-calcium phosphate (ß-TCP) as a biomimetic bone material are fabricated, thereby providing an environment appropriate for bone regeneration. The Ca2+ in ß-TCP and COO- in gelatin form a stable electrostatic interaction, and the composite scaffold shows suitable rheological properties for bioprinting. The gelatin/ß-TCP scaffold is crosslinked with glutaraldehyde vapor and unreacted aldehyde groups which can cause toxicity to cells is removed by a glycine washing. The stable binding of the hydrogel is revealed as a result of FTIR and degradation rate. It is confirmed that the composite scaffold has compressive strength similar to that of cancellous bone and 60 wt% ß-TCP groups containing 40 wt% gelatin have good cellular activity with preosteoblasts. Also, in the animal experiments, the gelatin/ß-TCP scaffold confirms to induce bone formation without any inflammatory responses. This study suggests that these fabricated scaffolds can serve as a potential bone substitute for bone regeneration.

Synthesis of polypyrrole nanorods via sacrificial removal of aluminum oxide nanopore template: A study on cell viability, electrical stimulation and neuronal differentiation of PC12 cells.

Synthesis of nanomaterials having uniform shape and size is a challenging task. Properties exhibited by such substrates would be compatible and homogeneous compared to the average properties displayed by those substrates with heterogeneous size. Herein, we report the synthesis of polypyrrole nanorods (PPy-NRs) of almost uniform size via oxidative chemical polymerization of pyrrole within anodized aluminum oxide nanopores followed by sacrificial removal of the template. Field emission scanning electron microscopy (FE-SEM), fourier transformed infra-red (FT-IR) spectra, X-ray diffraction (XRD), and ultra-violet-visible-near infra-red (UV-Vis-NIR) spectra of the substrate were used to analyze the physicochemical properties of as-synthesized PPy-NRs. PPy-NRs treated MC3T3-E1 and PC12 cells exhibited good biocompatibility in CCK-8 and live/dead assays. The assay showed more cell viability on PC12 cell lines. Electrical stimulation through PPy-NRs treated PC12 cells accelerated neuronal differentiation compared to those without electrical stimulation during in vitro cell culture.

Thromboresistant semi-IPN hydrogel coating: Towards improvement of the hemocompatibility/biocompatibility of metallic stent implants.

Here we developed a semi-interpenetrating network (IPN) hydrogel obtained by free radical polymerization to fabricate a coated stent with the aim of incorporating a natural topography present in the human body to improve biological activity. The method involves sandwiching a bare metal stent in the semi-IPN hydrogel via solution cast molding. The bio-functionality of the membrane could be tuned by incorporating Polydopamine into the matrix, and also the mechanical property was optimized by choosing an adequate concentration of acrylamide. The coating containing polydopamine hydrogel showed good mechanical stability under continuous flow condition, as demonstrated by crimping and deployment into a catheter without damage. Stent polymer bonding was enhanced via polydopamine incorporation in the matrix. The non-thrombogenicity of the coating containing hydrogel was confirmed through dynamic hemocompatibility studies in vitro. Vascular simulations, including other biomechanical performance, like durability testing, radial strength, and recoil, were demonstrated. The dopamine containing hydrogel membrane (DCHM) was found to promote cell material interaction due to the ability of the catechol to bind protein and induce HUVECs cytoplasmic spreading, proliferation, and migration, with reduced smooth muscle cell (SMCs) activity. SMCs inhibition correlated well with the amount of incorporated catechol in the matrix. Our results show that this material used as coated stent could be more effective in suppressing platelet aggregation with improved haemocompatibility/biocompatibility for faster re-endothelialization than bare metal stent (BMS).

In situ gold nanoparticle growth on polydopamine-coated 3D-printed scaffolds improves osteogenic differentiation for bone tissue engineering applications: in vitro and in vivo studies.

In this study, we designed scaffolds coated with gold nanoparticles (GNPs) grown on a polydopamine (PDA) coating of a three-dimensional (3D) printed polycaprolactone (PCL) scaffold. Our results demonstrated that the scaffolds developed here may represent an innovative paradigm in bone tissue engineering by inducing osteogenesis as a means of remodeling and healing bone defects.

Characterization of truncated endo-ß-1,4-glucanases from a compost metagenomic library and their saccharification potentials.

A gene encoding an endo-ß-1,4-glucanase (Cel6H-f481) was cloned from a compost metagenomic library. The gene, cel6H-f481, was composed of 1446 bp to encode a fused protein of 481 amino acid residues (50,429 Da), i.e., 445 residues (Cel6H-445) from the metagenome, and 36 residues from the pUC19 vector at N-terminus. Cel6H-445 belonged to glycosyl hydrolase (GH) family 6 and showed 71% identity with Actinotalea fermentans endoglucanase with low coverage. Several active bands of truncated forms were observed by activity staining of the crude extract. Major truncated enzymes of 35 (Cel6H-p35) and 23 kDa (Cel6H-p23) were separated by HiTrap Q chromatography. The two enzymes had the same optimum temperature (50 °C) and pH (5.5), but Cel6H-p35 was more thermostable than Cel6H-p23 and other GH6 endoglucanases reported. Both enzymes efficiently hydrolyzed carboxymethyl-cellulose (CMC) and barley ß-glucan, but hardly hydrolyzed other substrates tested. The Vmax of Cel6H-p35 for CMC was 1.4 times greater than that of Cel6H-p23. The addition of the crude enzymes to a commercial enzyme set increased the saccharification of pretreated rice straw powder by up to 30.9%. These results suggest the N-terminal region of Cel6H-p35 contributes to thermostability and specific activity, and that the enzymes might be a useful additive for saccharification.

RF-magnetron sputtering technique for producing hydroxyapatite coating film on various substrates.

A sputtering technique is an effective method for surface modification of materials, but there are many complex process parameters to influence on the physical and chemical properties of the sputtered coating films. In this paper the process parameters were investigated when the hydroxyapatite (HA) was coated onto various substrates including titanium (Ti), alumina ceramic (Al(2)O(3)) and stainless steel (SUS) plates under various sputtering conditions, target type, Ar gas pressure, and discharge power. The deposition rate of HA was much higher in a solid plate target than in a powder lump target owing to the difference of apparent density 75%, 18%, respectively. Ar gas pressure little influenced on the deposition rate. The HA coating thickness increased in proportion with discharge power. After hydrothermal treatment the thickness of HA slightly decreased, on the other hands Ca/P ratio slightly raised. The surface of the HA coating was smooth, homogeneous and dense.

Surface modification of 3D-printed porous scaffolds via mussel-inspired polydopamine and effective immobilization of rhBMP-2 to promote osteogenic differentiation for bone tissue engineering.

UNLABELLED: For tissue engineering, a bio-porous scaffold which is applied to bone-tissue regeneration should provide the hydrophilicity for cell attachment as well as provide for the capability to bind a bioactive molecule such as a growth factor in order to improve cell differentiation. In this work, we prepared a three-dimensional (3D) printed polycaprolactone scaffold (PCLS) grafted with recombinant human bone morphogenic protein-2 (rhBMP2) attached via polydopamine (DOPA) chemistry. The DOPA coated PCL scaffold was characterized by contact angle, water uptake, and X-ray photoelectron spectroscopy (XPS) in order to certify that the surface was successfully coated with DOPA. In order to test the loading and release of rhBMP2, we examined the release rate for 28days. For the In vitro cell study, pre-osteoblast MC3T3-E1 cells were seeded onto PCL scaffolds (PCLSs), DOPA coated PCL scaffold (PCLSD), and scaffolds with varying concentrations of rhBMP2 grafted onto the PCLSD 100 and PCLSD 500 (100 and 500ng/ml loaded), respectively. These scaffolds were evaluated by cell proliferation, alkaline phosphatase activity, and real time polymerase chain reaction with immunochemistry in order to verify their osteogenic activity. Through these studies, we demonstrated that our fabricated scaffolds were well coated with DOPA as well as grafted with rhBMP2 at a quantity of 22.7±5ng when treatment with 100ng/ml rhBMP2 and 153.3±2.4ng when treated with 500ng/ml rhBMP2. This grafting enables rhBMP2 to be released in a sustained pattern. In the in vitro results, the cell proliferation and an osteoconductivity of PCLSD 500 groups was greater than any other group. All of these results suggest that our manufactured 3D printed porous scaffold would be a useful construct for application to the bone tissue engineering field. STATEMENT OF SIGNIFICANCE: Tissue-engineered scaffolds are not only extremely complex and cumbersome, but also use organic solvents which can negatively influence cellular function. Thus, a rapid, solvent-free method is necessary to improve scaffold generation. Recently, 3D printing such as a rapid prototyping technique has several benefits in that manufacturing is a simple process using computer aided design and scaffolds can be generated without using solvents. In this study, we designed a bio-active scaffold using a very simple and direct method to manufacture DOPA coated 3D PCL porous scaffold grafted with rhBMP2 as a means to create bone-tissue regenerative scaffolds. To our knowledge, our approach can allow for the generation of scaffolds which possessed good properties for use as bone-tissue scaffolds.

The metallurgical characteristics of non-precious alloys using Nd:YAG laser welding.

BACKGROUND: This study aimed to determine the effect of hardness change according to penetration depth in the laser fusing zone and observed the correlation of the microstructure as an Nd:YAG laser was irradiated to Ni-Cr alloy for dental use by setting the spot diameter size with respect to defocusing distances. In all groups, the hardness depth profiles in the laser fusing zone and heat-affecteded zone (HAZ) had larger values than those of the base metal. In addition, the hardness values in places beyond the fusing zone and the HAZ were measured as being quantitatively lower. METHODS: The alloys used in this study were Verabond 2 V, Noritake Super, and Bellabond Plus, which are commercially used non-precious dental alloys. The specimens were cut to have a plate shape with a size of 0.5 × 3.0 × 2.5 mm. This was followed by setting the Nd:YAG laser output, pulse duration, and frequency to 60 W, 10 ms, and 5 Hz, respectively. The laser was then irradiated as the spot diameter condition varied between 0.5 mm and 1.4 mm in accordance with defocusing distance from 0.0 mm to 2.0 mm. After the laser irradiation, a cross-section of the fusing zone in the specimens was observed in terms of laser melted depth, hardness depth profile, and the microstructure of each alloy. RESULTS: The observation result of the diffusion of the constituent elements and microstructure using field emission scanning electron microscopy, energy dispersive spectroscopy (EDS), and electron probe micro-analyzer showed that the fusing zone revealed a much finer dendritic form than the base metal due to the self-quenching effect after laser melting, while no change in constituent elements was found although some evaporation of the main elements was observed. CONCLUSIONS: These results suggest that each Mo and Si combined inter-metallic compounds were formed on the interdendritic area. Through this study, the laser fusing zone had better hardenability due to the inter-metallic compound and grain refinement effect.

Thickness-controllable electrospun fibers promote tubular structure formation by endothelial progenitor cells.

Controlling the thickness of an electrospun nanofibrous scaffold by altering its pore size has been shown to regulate cell behaviors such as cell infiltration into a three-dimensional (3D) scaffold. This is of great importance when manufacturing tissue-engineering scaffolds using an electrospinning process. In this study, we report the development of a novel process whereby additional aluminum foil layers were applied to the accumulated electrospun fibers of an existing aluminum foil collector, effectively reducing the incidence of charge buildup. Using this process, we fabricated an electrospun scaffold with a large pore (pore size >40 µm) while simultaneously controlling the thickness. We demonstrate that the large pore size triggered rapid infiltration (160 µm in 4 hours of cell culture) of individual endothelial progenitor cells (EPCs) and rapid cell colonization after seeding EPC spheroids. We confirmed that the 3D, but not two-dimensional, scaffold structures regulated tubular structure formation by the EPCs. Thus, incorporation of stem cells into a highly porous 3D scaffold with tunable thickness has implications for the regeneration of vascularized thick tissues and cardiac patch development.