A Case Report of a 2-Year Follow-Up of Minimally Invasive Surgery in Peri-Implantitis: Peri-Implant Excisional Procedure and Access Surgery.

This case report describes the treatment of peri-implantitis lesions through a minimally invasive surgical procedure using a peri-implant excisional procedure and access surgery (PEAS). The prosthesis was disconnected, and the peri-implant granulation tissue removed after a peri-implant circular incision. Chemical debridement with hydrogen peroxide on a cotton ball and then mechanical debridement with a rotary round titanium brush and tufted brush with titanium bristles were conducted. The surgical intervention was effective in arresting the peri-implantitis. No further radiographic bone loss was observed over the 2-year follow-up period. This technique effectively cleans the contaminated implant surface, minimizes surgical morbidity, and allows for prosthesis delivery on the day of surgery. However, further studies with a larger sample size are needed to identify the reliability and validity of this novel technique.

Obliteration of Recurrent Large Dentigerous Cyst Using Bilateral Buccal Fat Pad Sling Flaps.

Dentigerous cyst (DC), also known as follicular cyst, is an odontogenic cyst with fluid accumulation between the crown and enamel organ of an unerupted tooth, pushing the crown away from the alveolar bone. The patients with DC in the maxillary sinus should be evaluated thoroughly by extraoral and intraoral examinations, proper diagnostic imaging procedures, and pathologic examination to avoid misdiagnosis of maxillary sinusitis. The standard treatment for DC in the maxillary sinus is often removed by Caldwell-Luc approach. Furthermore, marsupialization or functional endoscopic sinus surgery may be performed because of the size, location of the cysts, or the age of the patients. Sometimes, DC recurred and it made contour deformity. The buccal fat pad (BFP) was mentioned for the first time by Heister in 1732 and better described by Bichat in 1802. Egyedi was the first to report use of the BFP in oral reconstruction for the closure of oroantral and oronasal communications, and Tideman et al showed there was no need to cover BFP by a skin graft when used for defects of oral cavity. So, the authors report our experience with the bilateral pedicled sling BFP flap for intraoral reconstruction after larger recurrent DC removal and describe advantages, operative procedure, and possible complications of the DC.

The association between periodontitis and dyslipidemia based on the Fourth Korea National Health and Nutrition Examination Survey.

AIMS: The aim of this study was to examine whether dyslipidemia is associated with periodontitis in a representative sample of Korean adults who were involved in the Fourth Korea National Health and Nutrition Examination Survey (KNHANES). MATERIALS AND METHODS: A total of 18,210 subjects over 19 years of age who participated in KNHANES were examined. Dyslipidemia is defined according to the definition proposed by the Korean Society of Lipidology and Atherosclerosis. The periodontal status of the patients was assessed by the Community Periodontal Index (CPI). Multivariate logistic regression analysis was carried out and adjusted for socio-demographics, oral health behaviours and status and general health behaviour. All analyses considered a complex sampling design, and multivariate analysis was also performed in the subgroups (age, gender and current smoking status). RESULTS: Multivariate logistic regression analysis revealed significant associations between dyslipidemia except pre-hypercholesterolemia and periodontitis. In the subgroup analysis, periodontitis was significantly associated with hypo-HDL-cholesterolemia and had a potential association with hyper- triglycerides (TG) in subjects younger than 40 years. The adjusted ORs were greater in the present smoker group than the non-smoker group. CONCLUSIONS: Dyslipidemia except pre-hypercholesterolemia is associated with periodontitis.

Platelet-rich plasma alone is unable to trigger contact osteogenesis on titanium implant surfaces.

PURPOSE: Osseointegration consists of bidirectional bone formation around modified implant surfaces by contact osteogenesis and distance osteogenesis. This study tested whether contact osteogenesis on the surface of a modified titanium (Ti) implant is stimulated by cytokines in the blood. METHODS: In the first two types of experiments, sandblasted, large-grit, acid-etched Ti implants and turned Ti tubes were inserted into rabbit tibiae. To exclude the influence of distance osteogenesis, the tubes were inserted into the tibiae, and implants were placed inside the tubes. In a third type of experiment, the implants and tubes were inserted into the rabbit tibiae, and platelet-rich plasma (PRP) or recombinant human bone morphogenetic protein-2 (rhBMP-2) was applied topically. Four weeks after implantation, undecalcified specimens were prepared for histomorphometry. Bone-to-implant contact (BIC) and bone area per tissue (BA) were measured, and the data were analysed using one-way ANOVA at a significance level of 0.05. RESULTS: When the response of bone to Ti tubes with implants was compared to that without implants (first experiment), little bone formation was found inside the tubes. The mean BIC of implant specimens inside the tubes was 21.41 ± 13.81% in a second experiment that evaluated bone responses to implants with or without Ti tubes. This mean BIC value was significantly lower than that in the implant-only group (without tubes) (47.32 ± 12.09%, P = 0.030). The third experiment showed that rhBMP-2 significantly increased contact osteogenesis on the implant surface, whereas PRP had no effect (mean BIC: 66.53 ± 14.06% vs. 16.34 ± 15.98%, P = 0.004). CONCLUSIONS: Platelet-rich plasma alone is unable to trigger contact osteogenesis on the modified titanium implant surface.

Effects of hyaluronic acid and deproteinized bovine bone mineral with 10% collagen for ridge preservation in compromised extraction sockets.

BACKGROUND: The aim of this study was to evaluate the efficacy of deproteinized bovine bone mineral with 10% collagen (DBBM-C) soaked with hyaluronic acid (HA) for ridge preservation in compromised extraction sockets. METHODS: Bilateral third, fourth premolars and first molar were hemisected, distal roots were extracted, and then combined endodontic periodontal lesion was induced in the remaining mesial roots. After 4 months, the mesial roots were extracted and the following four treatments were randomly performed: Absorbable collagen sponge (ACS), ACS soaked with HA (ACS+HA), ridge preservation with DBBM-C covered with a collagen membrane (RP), ridge preservation with DBBM-C mixed with HA and covered with a collagen membrane (RP+HA). Animals were sacrificed at 1 and 3 months following treatment. Ridge dimensional changes and bone formation were examined using microcomputed tomography, histology, and histomorphometry. RESULTS: At 1 month, ridge width was significantly higher in the RP and RP+HA groups than in the ACS and ACS+HA groups, while the highest proportion of mineralized bone was observed in ACS+HA group. At 3 months, ridge width remained significantly higher in the RP and RP+HA groups than in the ACS and ACS+HA groups. ACS+HA and RP+HA treatments featured the highest proportion of mineralized bone and bone volume density compared with the other groups. No statistical difference was observed between ACS+HA and RP+HA treatments. CONCLUSIONS: Ridge preservation with the mixture DBBM-C/HA prevented dimensional shrinkage and improved bone formation in compromised extraction sockets at 1 and 3 months.

The impact of surface treatment in 3-dimensional printed implants for early osseointegration: a comparison study of three different surfaces.

3D printing technology has been gradually applied to various areas. In the present study, 3D-printed implants were fabricated with direct metal laser sintering technique for a dental single root with titanium. The 3D implants were allocated into following groups: not treated (3D-None), sandblasted with a large grit and acid-etched (3D-SLA), and target-ion-induced plasma-sputtered surface (3D-TIPS). Two holes were drilled in each tibia of rabbit, and the three groups of implants were randomly placed with a mallet. Rabbits were sacrificed at two, four, and twelve weeks after the surgery. Histologic and histomorphometric analyses were performed for the evaluation of mineralized bone-to-implant contact (mBIC), osteoid-to-implant contact (OIC), total bone-to-implant contact (tBIC), mineralized bone area fraction occupancy (mBAFO), osteoid area fraction occupancy (OAFO), and total bone area fraction occupancy (tBAFO) in the inner and outer areas of lattice structure. At two weeks, 3D-TIPS showed significantly higher inner and outer tBIC and inner tBAFO compared with other groups. At four weeks, 3D-TIPS showed significantly higher outer OIC than 3D-SLA, but there were no significant differences in other variables. At twelve weeks, there were no significant differences. The surface treatment with TIPS in 3D-printed implants could enhance the osseointegration process in the rabbit tibia model, meaning that earlier osseointegration could be achieved.

Geometric analysis of alveolar bone around the incisors after anterior retraction following premolar extraction.

OBJECTIVE: To evaluate changes in shape and alterations in thickness and vertical marginal bone levels of the alveolar bone around the maxillary and mandibular incisors before and after orthodontic treatment with premolar extraction using geometric morphometric analysis. MATERIALS AND METHODS: Thirty-six patients with Class I bialveolar protrusion who underwent orthodontic treatment with premolar extraction were included. Cone-beam computed tomographic scans were obtained from the patients before and after treatment. Five fixed landmarks and 70 semilandmarks were used to represent the morphology of the alveolar bone around the maxillary and mandibular incisors. The coordinates of the landmarks of the alveolar bones were generated by Procrustes fit. The labial and lingual alveolar bone thicknesses around the maxillary and mandibular incisors and vertical marginal bone level were assessed quantitatively. RESULTS: There was a significant difference in shape change of the alveolar bone before and after treatment. The deformation grid of the thin plate spline showed that the thickness and vertical marginal bone decreased on the lingual side after treatment. Shape changes were greater for the lingual alveolar bone on the mandibular incisor than for the maxillary incisors. CONCLUSIONS: Orthodontic treatment with premolar extraction might cause loss of alveolar bone around the maxillary and mandibular incisors. Careful consideration is needed to avoid iatrogenic degeneration of periodontal support around the incisors, particularly in the lingual area.

Comparison of Periodontopathic Bacterial Profiles of Different Periodontal Disease Severity Using Multiplex Real-Time Polymerase Chain Reaction.

Periodontopathic bacteria are known to have a pivotal role in the pathogenesis of periodontitis. The aim of the study was to quantitatively compare bacterial profile of patients with different severity of periodontal disease using samples from mouthwash and the subgingival area. Further analysis was performed to evaluate the correlation between mouthwash and two subgingival sampling methods: paperpoint and gingival retraction cord; 114 subjects enrolled in the study, and were divided equally into three groups according to disease severity. Mouthwash and subgingival sampling were conducted, and the samples were quantitatively analyzed for 11 target periodontopathic bacteria using multiplex real-time PCR. There were statistically significant differences in bacterial counts and prevalence of several species between the study groups. Mouthwash sampling showed significant correlations with two different subgingival sampling methods in regard to the detection of several bacteria (e.g., ρ = 0.793 for Porphyromonas gingivalis in severe periodontitis), implying that mouthwash sampling can reflect subgingival microbiota. However, the correlation was more prominent as disease severity increased. Although bacteria in mouthwash have potential to become a biomarker, it may be more suitable for the diagnosis of severe periodontitis, rather than early diagnosis. Further research is required for the discovery of biomarkers for early diagnosis of periodontitis.

Leukocyte- and platelet-rich fibrin is an effective membrane for lateral ridge augmentation: An in vivo study using a canine model with surgically created defects.

BACKGROUND: Leukocyte- and platelet-rich fibrin (L-PRF) has been suggested to enhance bone healing and the effects of L-PRF need to be evaluated in lateral residual alveolar bone augmentation. This in vivo study aimed to analyze the effects of L-PRF as a membrane on bone regeneration in lateral residual alveolar augmentation. METHODS: Eight mongrel dogs were used; the mandibular premolars were extracted and then three lateral ridge defects were surgically created on each side of the arch. After 4 weeks, guided bone ridge augmentation was performed in each defect with the following treatment groups: N+D (nonresorbable membrane with deproteinized bovine bone mineral [DBBM]), N+B (nonresorbable membrane with ß-tricalcium phosphate [ß-TCP]), R+D (resorbable membrane with DBBM), R+B (resorbable membrane with ß-TCP), and P+D (L-PRF with DBBM), and P+B (L-PRF and ß-TCP). Following 4 weeks of bone healing, the new bone amount for each group was measured by light microscopy (primary outcome) and microcomputed tomography (micro-CT) (secondary outcome). The mean values were compared at the 0.05 significance level. RESULTS: The P+D group showed the most newly formed bone in histology and in micro-CT analyses. L-PRF was more effective in bone regeneration when compared to nonresorbable and resorbable barrier membranes. Additionally, this study indicated DBBM was the more favorable osseous graft material for bone regeneration than ß-TCP when barrier membranes are used. CONCLUSION: From the results of this in vivo study using surgically created defects, L-PRF plays an effective role as a barrier membrane for lateral ridge augmentation. L-PRF may be an excellent barrier membrane in place of other nonresorbable and resorbable membranes.

Diagnostic Models for Screening of Periodontitis with Inflammatory Mediators and Microbial Profiles in Saliva.

This study aims to investigate and assess salivary biomarkers and microbial profiles as a means of diagnosing periodontitis. A total of 121 subjects were included: 28 periodontally healthy subjects, 24 with Stage I periodontitis, 24 with Stage II, 23 with Stage III, and 22 with Stage IV. Salivary proteins (including active matrix metalloproteinase-8 (MMP-8), pro-MMP-8, total MMP-8, C-reactive protein, secretory immunoglobulin A) and planktonic bacteria (including Aggregatibacter actinomycetemcomitans, Porphyromonas gingivalis, Tannerella forsythia, Treponema denticola, Fusobacterium nucleatum, Prevotella intermedia, Porphyromonas nigrescens, Parvimonas micra, Campylobacter rectus, Eubacterium nodatum, Eikenella corrodens, Streptococcus mutans, Staphylococcus aureus, Enterococcus faecalis, and Actinomyces viscosus) were measured from salivary samples. The performance of the diagnostic models was assessed by receiver operating characteristics (ROCs) and area under the ROC curve (AUC) analysis. The diagnostic models were constructed based on the subjects' proteins and/or microbial profiles, resulting in two potential diagnosis models that achieved better diagnostic powers, with an AUC value > 0.750 for the diagnosis of Stages II, III, and IV periodontitis (Model PA-I; AUC: 0.796, sensitivity: 0.754, specificity: 0.712) and for the diagnosis of Stages III and IV periodontitis (Model PA-II; AUC: 0.796, sensitivity: 0.756, specificity: 0.868). This study can contribute to screening for periodontitis based on salivary biomarkers.

Comparison of 3D-Printed Dental Implants with Threaded Implants for Osseointegration: An Experimental Pilot Study.

This study aimed to compare bone healing and implant stability for three types of dental implants: a threaded implant, a three-dimensional (3D)-printed implant without spikes, and a 3D-printed implant with spikes. In four beagle dogs, left and right mandibular premolars (2nd, 3rd, and 4th) and 1st molars were removed. Twelve weeks later, three types of titanium implants (threaded implant, 3D-printed implant without spikes, and 3D-printed implant with spikes) were randomly inserted into the edentulous ridges of each dog. Implant stability measurements and radiographic recordings were taken every two weeks following implant placement. Twelve weeks after implant surgery, the dogs were sacrificed and bone-to-implant contact (BIC) and bone area fraction occupied (BAFO) were compared between groups. At implant surgery, the primary stability was lower for the 3D-printed implant with spikes (74.05 ± 5.61) than for the threaded implant (83.71 ± 2.90) (p = 0.005). Afterwards, no significant difference in implants' stability was observed between groups up to post-surgery week 12. Histomorphometrical analysis did not reveal a significant difference between the three implants for BIC (p = 0.101) or BAFO (p = 0.288). Within the limits of this study, 3D-printed implants without spikes and threaded implants showed comparable implant stability measurements, BIC, and BAFO.

Biological Responses to the Transitional Area of Dental Implants: Material- and Structure-Dependent Responses of Peri-Implant Tissue to Abutments.

The stability of peri-implant tissue is essential for the long-term success of dental implants. Although various types of implant connections are used, little is known about the effects of the physical mechanisms of dental implants on the stability of peri-implant tissue. This review summarizes the relevant literature to establish guidelines regarding the effects of connection type between abutments and implants in soft and hard tissues. Soft tissue seals can affect soft tissue around implants. In external connections, micromobility between the abutment and the hex component of the implant, resulting from machining tolerance, can destroy the soft tissue seal, potentially leading to microbial invasion. Internal friction connection implants induce strain on the surrounding bone via implant wall expansion that translates into masticatory force. This strain is advantageous because it increases the amount and quality of peri-implant bone. The comparison of internal and external connections, the two most commonly used connection types, reveals that internal friction has a positive influence on both soft and hard tissues.

The Effect of Ultraviolet Photofunctionalization on a Titanium Dental Implant with Machined Surface: An In Vitro and In Vivo Study.

Ultraviolet (UV) photofunctionalization has been suggested as an effective method to enhance the osseointegration of titanium surface. In this study, machined surface treated with UV light (M + UV) was compared to sandblasted, large-grit, acid-etched (SLA) surface through in vitro and in vivo studies. Groups of titanium specimens were defined as machined (M), SLA, and M + UV for the disc type, and M + UV and SLA for the implant. The discs and implants were assessed using scanning electron microscopy, confocal laser scanning microscopy, electron spectroscopy for chemical analysis, and the contact angle. Additionally, we evaluated the cell attachment, proliferation assay, and real-time polymerase chain reaction for the MC3T3-E1 cells. In a rabbit tibia model, the implants were examined to evaluate the bone-to-implant contact ratio and the bone area. In the M + UV group, we observed the lower amount of carbon, a 0°-degree contact angle, and enhanced osteogenic cell activities (p < 0.05). The histomorphometric analysis showed that a higher bone-to-implant contact ratio was found in the M + UV implant at 10 days (p < 0.05). In conclusion, the UV photofunctionalization of a Ti dental implant with M surface attained earlier osseointegration than SLA.

Flap Management in Alveolar Ridge Preservation: A Systematic Review and Meta-Analysis.

PURPOSE: This systematic review aimed to identify the effects of certain flap management procedures on ridge preservation on the basis of existing literature. MATERIALS AND METHODS: Electronic (MEDLINE, EMBASE, and Cochrane Central Register of controlled trials) and manual searches of the literature were conducted until February 2017. Randomized controlled trials (RCTs), controlled clinical trials (CCTs), and prospective cohort studies that involved at least 10 subjects were eligible for this systematic review. To evaluate the beneficial effects of flap management on ridge preservation, changes in the bone width, bone height, and keratinized gingiva width were calculated using a random effects model. RESULTS: Eleven studies (nine RCTs and two CCTs) were included in this review. No statistically significant differences in bone width and height changes were identified between the flapped and flapless ridge preservation techniques and between the free gingival graft and flapless ridge preservation techniques. A statistically significant shrinkage in keratinized gingiva width was noted with flapped ridge preservation compared with flapless ridge preservation (weighted mean differences, -3.21 mm; 95% confidence interval, -4.10 to -2.33; P < .00001; heterogeneity, 51%; χ2, 0.15). CONCLUSION: Within the limitations, this review reveals that flapless ridge preservation was more effective in preserving bone width, bone height, and keratinized gingiva width. To present pertinent evidence regarding which flap management should be recommended for ridge preservation, more controlled and high-quality studies are warranted.