Evaluation of alveolar ridge preservation in sockets with buccal dehiscence defects using two types of xenogeneic biomaterials: An in vivo experimental study.

OBJECTIVES: Alveolar ridge preservation (ARP) has been extensively investigated in various preclinical and clinical studies, yielding favorable results. We aim to evaluate the effects of ARP using collagenated bovine bone mineral (CBBM) alone or particulated bovine bone mineral with a non-cross-linked collagen membrane (PBBM/NCLM) in tooth extraction sockets with buccal dehiscence in an experimental dog model. MATERIALS AND METHODS: The mesial roots of three mandibular premolars (P2, P3, and P4) were extracted from six mongrel dogs 4 weeks after inducing dehiscence defects. ARP was randomly performed using two different protocols: 1) CBBM alone and 2) PBBM/NCLM. Three-dimensional (3D) volumetric, micro-computed tomography, and histological analyses were employed to determine changes over a span of 20 weeks. RESULTS: In 3D volumetric and radiographic analyses, CBBM alone demonstrated similar effectiveness to PBBM/NCLM in ARP (p > .05). However, in the PBBM/NCLM group (3.05 ± 0.60 mm), the horizontal ridge width was well maintained 3 mm below the alveolar crest compared with the CBBM group (2.11 ± 1.01 mm, p = .002). CONCLUSION: Although the radiographic changes in the quality and quantity of bone were not significant between the two groups, the use of PBBM/NCLM resulted in greater horizontal dimensions and more favorable maintenance of the ridge profile.

Oral health and risk of cognitive disorders in older adults: A biannual longitudinal follow-up cohort.

BACKGROUND: Oral health may be associated with cognitive disorders such as mild cognitive impairment or dementia. OBJECTIVE: This study elucidates the effects of oral health conditions on the progression of cognitive disorders. METHODS: Data were collected from 153 participants of the Korean Longitudinal Study on Cognitive Aging and Dementia cohort who completed the longitudinal dental examinations and cognitive function assessments using the three-wave biannual survey. We analysed the relationship between dental factors and the conversion of cognitive function. RESULTS: The ratio of maxillary removable partial denture use (p = .03) was high in the converter and mild cognitive impairment/dementia groups. The low-grade ratio of posterior masticatory performance increased in the converter and mild cognitive impairment/dementia groups (modified Eichner index 2, p = .04). The mild cognitive impairment/dementia group had a higher rate of complete mandibular denture use (p < .001). The converter and mild cognitive impairment/dementia groups had fewer remaining teeth (p < .05) or removable prostheses (p < .01) than the normal group. CONCLUSIONS: Masticatory performance is associated with the conversion of cognitive disorders. Our findings suggest that oral health management can help delay the progression of cognitive disorders.

Assessment of Bone Height Changes Based on the Cone-Beam Computed Tomography Following Intentional Replantation for Periodontally Compromised Teeth.

Background and Objectives; This study aimed to evaluate the clinical outcomes and bone changes before and after intentional replantation (IR) for periodontally compromised teeth by using cone-beam computed tomography (CBCT). Materials and Methods; Fourteen periodontally involved teeth were selected for IR. A preoperative orthodontic procedure was performed to apply luxation, and the tooth was then gently extracted. Retrograde filling of the root-end canal was performed. Once the tooth was repositioned in the socket, it was splinted with the adjacent tooth. After three months, prosthetic restoration was performed. Results; Clinical parameters and CBCT images were obtained before and after the IR procedure. The height of the alveolar bone was measured on the CBCT images by using software. Most preoperative symptoms, including pain, mobility, probing depth (PD) and bleeding on probing (BOP), significantly decreased after IR (pain: 4.71 to 1.00; mobility: 1.36 to 0.29; PD: 5.60 to 2.85; BOP: 3.50 to 0.79). CBCT analysis indicated an increase in bone height after IR (the amount of change: maxilla, 4.00; mandible, 1.95). Conclusions; A previous study reported that IR for periodontally involved teeth is quite limited. However, in this study, IR of periodontally compromised teeth showed favorable results in clinical and radiographic evaluations, suggesting that IR may be an alternative to extraction of teeth with periodontal disease.

The Effect of Three Surgical Therapies to Increase Keratinized Mucosa Surrounding Dental Implants with Peri-Implantitis: A Pilot Study.

Background and Objectives: The purpose of this pilot study was to evaluate the clinical outcomes of three different methods for increasing the keratinized mucosa (KM) surrounding dental implants with peri-implantitis. Materials and methods: Twenty implant sites with peri-implantitis were divided into: (1) porcine collagen matrix (CM) group: seven implant sites; (2) apically positioned flap (APF) group: eight implant sites; and (3) free gingival graft (FGG) group: five implant sites. The KM width and clinical parameters (probing pocket depth (PPD) and bleeding on probing (BOP)) were measured at time points: before surgery (T0) and 30 (T1), 60 (T2), 90 (T3), and 180 (T4) days after surgery. Results: Regarding KM width, all the groups had significant differences for increasing horizontal and vertical KM width. The CM and FGG groups had greater KM than the APF group. There was a decrease in PPD in all three groups. APF and FGG showed significant differences in PPD at T1 and T2 compared to T0. Only the FGG group showed a significant difference in PPD at T3 and T4 compared with that at T0. BOP values were also reduced in all the groups at T1-T4 compared to T0. The APF and FGG groups showed a significant decrease in BOP. Conclusions: Three surgical therapies presented favorable results for increasing the KM surrounding implants. Compared with the FGG group, the CM showed similar results in increasing the KM around the dental implants with peri-implantitis.

Evaluating Change of Marginal Bone Height with Cone-Beam Computed Tomography Following Surgical Treatment with Guided Tissue Regeneration (Bone Grafting) or Access Flap Alone: A Retrospective Study.

Background and Objectives: This study aimed to evaluate the change of bone height following treatment of human intrabony defects with guided tissue regeneration (GTR) with bone grafting or access flap alone by cone-beam computed tomography (CBCT) scan. Materials and methods: This study was conducted as a retrospective longitudinal study. In this study, a total of 2281 teeth sites were included: the GTR group had 1210 sites, and the Flap group had 1071 sites. In the GTR group, demineralized freeze-dried bone (DFDBA) particles in combination with resorbable collagen membrane were used. No regenerative material was applied to the Flap group. CBCT images were taken twice at baseline and at least 2.5 months postoperatively. Bone heights were measured using software on CBCT images. Results: The bony change between the GTR and Flap groups was significantly different (p = 0.00001). Both males and females in the GTR group had smaller bone loss than in the Flap group. In age groups, significant differences of bony height between the GTR and Flap groups were observed in the subgroups consisting of those 29-45 and 46-53 years old. The non-smoking subjects in the GTR group had higher bone heights than those in the Flap group. In the absence of systemic disease and medicine, bone formation was higher in the GTR group than in the Flap group. In terms of oral position, the #14-17, #34-37, and #44-47 subgroups of the GTR group showed higher levels of bone heights than those of the Flap group. Conclusions. The results of this study indicated that the GTR procedure offers the additional benefit of higher bone heights than the Flap procedure does.

Lateral onlay grafting using different combinations of soft-type synthetic block grafts and resorbable collagen membranes: An experimental in vivo study.

OBJECTIVES: To observe the sequential healing of lateral onlay grafts in terms of volumetric and histological changes when using different combinations of synthetic soft-type block bone and resorbable collagen membranes. MATERIALS AND METHODS: A lateral onlay graft procedure was applied at the chronic narrow alveolar ridge of the mandible in 15 beagle dogs. The groups were allocated as follows: (a) empty control; (b) onlay graft using soft-type block bone 1 (hydroxyapatite [HA]: ß-tricalcium phosphate [ß-TCP] = 15:85) and a non-cross-linked collagen membrane (MP-BG group); (c) onlay graft using soft-type block bone 2 (HA:ß-TCP = 60:40) and a non-cross-linked collagen membrane (OC-BG group); and (d) onlay graft using soft-type block bone 1 (HA:ß-TCP = 15:85) and a cross-linked collagen membrane (MP-CM group). Volumetric and histomorphometric analyses were performed at 4, 8 and 16 weeks postoperatively. RESULTS: No clinical complications occurred in any of the groups. The OC-BG group showed significantly larger total augmented volumes than the control and MP-BG groups after 8 and 16 weeks. The areas of new bone were significantly larger in the OC-BG group than the other groups at 16 weeks. The horizontal thickness of the augmented ridge was significantly larger in the OC-BG group than in the control group at 16 weeks. CONCLUSION: The OC-BG group showed superior volume maintenance and osteogenic potential for up to 16 weeks compared to the other groups in an onlay graft model of the dog mandible despite the displacement of the bone graft.

Comparison of gene expression between mandibular and iliac bone-derived cells.

OBJECTIVES: The purpose of this study is to investigate the differences in gene expression between the human mandibular and iliac bone-derived cells (BCs) for better understanding of the site-specific characteristics of bones. METHODS: Primary cells were obtained from mandibular and iliac bones from six healthy, elderly donors. To investigate site-specific differences, gene expression profile of mandibular and iliac BC from the same donors were compared via cDNA microarray analysis. RESULTS: A comparison of the gene expression profiles revealed that 82 genes were significantly upregulated and 66 genes were downregulated with 1.5 fold or greater in mandibular versus iliac BCs. The most significantly differentially regulated genes were associated with skeletal system development or morphogenesis (SIX1, MSX1, MSX2, HAND2, PRRX1, OSR2, HOX gene family, PITX2). Especially, upregulated genes in mandibular BC were related with tooth morphogenesis, originated from the ectomesenchyme. Microarray analysis revealed that Msx1 was 2.03-fold and Msx2 was 1.99-fold upregulated in mandibular versus iliac BCs (both p < 0.01). Furthermore, in mandibular BCs, all members of the HOX gene family that were analyzed were downregulated (p < 0.01) and osteopontin was also downregulated by 2.84-fold (p < 0.01). CONCLUSIONS: Site-specific differences between jaw and long bones can be explained by the differences in gene expression patterns. Our results suggest that bone cell-derived cells maintain the genetic characteristics of their embryological origin. CLINICAL RELEVANCE: This study revealed fundamental differences in gene expression between the mandibular and iliac bone in humans. These differences could be important for understanding jaw bone-specific development of bisphosphonate-related osteonecrosis of the jaw.

Consecutive unsplinted implant-supported restorations to replace lost multiple adjacent posterior teeth: A 4-year prospective cohort study.

OBJECTIVE: The aim of this study was to investigate the various events occurring in unsplinted implant restoration in posterior jaws during a period of 4 years. MATERIALS AND METHODS: From August 2008 to April 2009, eight volunteers (three men and five women) who had two or more consecutively missing teeth received 20 implants in posterior maxillae and mandibles. Unsplinted single crowns were delivered to each implant. For the 4-year follow-up periods, patients were enrolled in a maintenance schedule at 1, 3, 6, 12, 24, 36 and 48 months. The data, including a questionnaire, radiography, mobility and probing were recorded on regular check-ups. RESULTS: A total of 20 implants in eight patients were followed up for 48 months, showing a 100% survival rate. Mean marginal bone loss around implants was 0.26 mm. Statistical analysis revealed insignificant correlation between metal-ceramic and zirconia-ceramic crowns and among implant lengths (8.5 mm, 10 mm and 11.5 mm). Mean probing depths were similar or insignificantly different, regardless of the materials used or length of implants. The most frequent complications, in decreasing order, were food impaction (65%) and porcelain chipping (45%), sensitivity (25%), pain (20%) and loose contact (15%). Compared with metal-ceramic crowns, zirconia-ceramic crowns showed more unfavorable cases of porcelain chipping (p=0.017), pain (p=0.007) and loose contact with an adjacent crown (p=0.031). CONCLUSIONS: Within the limits of the sample size, this study showed that unsplinted implant-supported single restorations to replace consecutive posterior missing teeth may function well.

The activin/BMP-2 chimera AB204 promotes periodontal tissue regeneration in a buccal dehiscence model: a pilot study.

PURPOSE: A combination of activin and bone morphogenetic protein-2 (BMP-2), termed AB204, has been shown to improve osteogenic potential with fewer side effects than BMP-2 alone. This study was performed to evaluate the effect of AB204 on periodontal tissue regeneration in a dog buccal dehiscence model. METHODS: Buccal dehiscence defects were created on the maxillary premolars (P1, P2, and P3) of 6 mongrel dogs. After 5 weeks, the dogs were randomly assigned to 1 of 3 groups: the control, collagen matrix (CM), and CM/AB204 groups. Grafting procedures were then performed. The dogs were sacrificed 8 weeks after the grafting procedure, and volumetric and histological analyses were conducted. RESULTS: The thickness of the buccal gingiva in the CM/AB204 group was greater than those in the other groups at 2 weeks (P<0.05). The ridge width in the AB204/CM group exceeded the width in the other groups at 4 and 8 weeks; however, the difference was not statistically significant. Histological analysis revealed that the CM/AB204 group demonstrated the formation of new bone surrounded by newly formed periodontal ligament and cementum (P=0.035). CONCLUSIONS: The combined application of CM and AB204 shows promise in facilitating the regeneration of periodontal attachment, including the formation of new bone, cementum, and periodontal ligament.

Effectiveness of a collagen matrix seal and xenograft in alveolar ridge preservation: an experimental study in dogs.

Majority of previous studies on alveolar ridge preservation (ARP) used collagen membranes as barrier membranes, and further evidence for ARP in dehiscent extraction sockets with a deproteinized bovine bone mineral (DBBM) and matrix is needed. The aim of this study is to assess the impact of non-cross linked collagen membranes (membrane) and crosslinked collagen matrices (matrix) on ARP using DBBM in extraction sockets with buccal dehiscence. In six mongrel dogs, the mesial roots of three mandibular premolars (P2, P3, and P4) were extracted 1 month after dehiscence defect induction. Two experimental groups were randomly assigned: (1) DBBM with a membrane (DBBM/membrane group) and (2) DBBM with a matrix (DBBM/matrix group). Three-dimensional (3D) volumetric, microcomputed tomography (µCT), and histologic analyses were performed to assess the ridge preservation. Both groups were effective to maintain the ridge width (p > 0.05), and the DBBM/matrix group showed more favorable soft tissue regeneration and bone quality in the histological analysis (p = 0.05). Based on these results, DBBM/matrix could be better choice for ARP in cases of buccal dehiscence defects.

Bone regeneration using activin A/BMP2 chimera (AB204) with collagen membrane in rats with calvarial defects.

PURPOSE: Collagen has long been recognized as an excellent carrier for growth factors, and membrane-type collagen has been widely applied in dentistry for guided bone regeneration. This study was conducted to examine the effects of an activin A/BMP2 chimera (AB204) combined with a collagen membrane (CM) on bone repair in a rat calvarial defect model. METHODS: A unilateral calvarial defect measuring 5.0 mm was surgically created in 32 Sprague-Dawley rats. The rats were then randomly assigned to 1 of 4 groups, each consisting of 8 animals: control (untreated), CM (treated with a CM only), CM/bone morphogenetic protein 2 (BMP2) (treated with a CM and 1.0 µg of BMP2), and CM/AB204 (treated with a CM and 1.0 µg of AB204). Bone regeneration was evaluated using micro-computed tomography (CT) and histological analysis at 2 and 4 weeks following surgery. RESULTS: Micro-CT analysis revealed that bone formation in the CM/BMP2 and CM/AB204 groups was superior to that observed in the control and CM groups at both 2 and 4 weeks postoperatively. BMP2 induced greater bone regeneration than AB204 at 2 weeks; however, AB204 resulted in a greater bone volume at 4 weeks, achieving the highest values recorded. No significant differences were found between the CM/BMP2 and CM/AB204 groups at either time point (P>0.05). On histological examination, new bone formation was evident in both CM/BMP2 and CM/AB204 groups. CONCLUSIONS: Within the limitations of this study, the findings indicate that AB204 may enhance osteogenic potential when used in combination with CM for bone regeneration.

Gingival biotype modification with collagen matrix or autogenous subepithelial connective tissue graft: Histologic and volumetric analyses in a beagle model.

Objectives: To evaluate the volumetric effect and biocompatibility of porcine tendon-derived type I collagen matrix graft (CG) in gingival biotype modification (GBM) compared with subepithelial connective tissue graft (SCTG) in a beagle model. Methods: Surface analysis using scanning electron microscopy and a collagen degradation assay of CG was performed in vitro. Six adult dogs were used in in vivo experiment, and each received autologous SCTG or CG at the anterior side. Histometric and three-dimensional digital volume analyses were conducted to compare quantitative changes in CG and SCTG in GBM. Immunohistochemical analysis was performed for the qualitative evaluation of CG compared to SCTG. Results: CG had a double-layered structure, and its degradation was slower than that of other well-reported materials. No critical problems were associated with the healing procedure. Changes in gingival thickness and volume in the CG and SCTG groups were equivalent, with no significant differences between the groups. Type I collagen and vascular endothelial growth factor expression levels were similar in both groups. Significance: CG and SCTG had equivalent potential for GBM in terms of quantity and quality. Additionally, CG could be used as a reasonable substitute for SCTG, making surgery convenient and predicting successful clinical outcomes.

Evaluation of regeneration after the application of 2 types of deproteinized bovine bone mineral to alveolar bone defects in adult dogs.

PURPOSE: The aim of this study was to evaluate the preclinical results of 2 types of commercially available deproteinized bovine bone mineral (DBBM) when applied to alveolar bone defects in dogs. METHODS: This study was conducted using 6 beagles. Alveolar defects in the mandible were formed and filled with 2 DBBMs produced by a similar procedure. Defects were randomly assigned to be filled using DBBM 1 or 2. All defects were covered with a collagen membrane and had a healing period of 12 weeks. After the dogs were sacrificed, histological, histomorphometric, and linear/volumetric analyses were performed. RESULTS: Both DBBM groups showed similar histological findings, demonstrating that bone remodeling had occurred and new bone had formed. The residual bone particles were surrounded by newly formed vital bone. In the histomorphometric analysis, the ratio of the area of vital bone and residual bone substitute in DBBM 2 (38.18% and 3.47%, respectively) was higher than that of DBBM 1 (33.74% and 3.41%, respectively), although the difference was not statistically significant. There were also no statistically significant differences between both groups in linear and volumetric analyses using micro-computed tomography scans and digitized images of dental casts. CONCLUSIONS: In the present study, DBBM 1and 2, which were produced by similar processes, showed similar results in histological, histomorphometric, and volumetric analyses. Further studies are needed to identify more specific differences between the 2 DBBMs.

Preparation and in vitro evaluation of anti-VCAM-1-Fab'-conjugated liposomes for the targeted delivery of the poorly water-soluble drug celecoxib.

When an inflammatory stimulus is given, vascular endothelial cells express various cell adhesion molecules including the vascular cell adhesion molecule (VCAM)-1. In this study, the possibility of specifically delivering anti-inflammatory drugs to activated endothelial cells by utilizing VCAM-1 as a target receptor was explored by loading celecoxib, a selective cyclooxygenase-2 inhibitor, into liposomes coupled to the Fab' fragment against VCAM-1. Anti-VCAM-1-Fab'-conjugated liposomes were prepared by forming an amide linkage between amino groups of Fab' and the carboxylic group of glutaryl-N-phosphatidylethanolamine in liposomes using 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide as a cross-linker in the presence of sulpho-N-hydroxysuccinimide. The coupling of Fab' to phospholipids constituting liposomes was confirmed by SDS-PAGE analysis. Under our optimized conjugation conditions, 130.0 µg Fab' was coupled to 1 µmol liposomes. Immunoblotting analysis showed that VCAM-1 protein expression could be induced by incubating human umbilical vein endothelial cells (HUVEC) with TNF-α. Confocal laser microsopy analysis revealed that Fab' conjugation to liposomes selectively increased liposomal uptake in TNF-α-pre-stimulated (VCAM-1-expressed) HUVECs, but not in cells without VCAM-1 expression. The concentration of celecoxib loaded in Fab'-conjugated liposomes was 281.1 ± 29 µg/mL, suggesting that liposomal loading also helped to overcome the limitations in celecoxib administration caused by its poor water solubility. Celecoxib loaded in Fab'-conjugated liposomes inhibited prostaglandin E2 (PGE2) production induced by TNF-α-pre-stimulation more efficiently than when loaded in conventional liposomes. Therefore, Fab'-conjugated liposomes served as a drug delivery system with dual functions: targeted delivery and solubilizing capacity.

Leukocyte- and platelet-rich fibrin is an effective membrane for lateral ridge augmentation: An in vivo study using a canine model with surgically created defects.

BACKGROUND: Leukocyte- and platelet-rich fibrin (L-PRF) has been suggested to enhance bone healing and the effects of L-PRF need to be evaluated in lateral residual alveolar bone augmentation. This in vivo study aimed to analyze the effects of L-PRF as a membrane on bone regeneration in lateral residual alveolar augmentation. METHODS: Eight mongrel dogs were used; the mandibular premolars were extracted and then three lateral ridge defects were surgically created on each side of the arch. After 4 weeks, guided bone ridge augmentation was performed in each defect with the following treatment groups: N+D (nonresorbable membrane with deproteinized bovine bone mineral [DBBM]), N+B (nonresorbable membrane with ß-tricalcium phosphate [ß-TCP]), R+D (resorbable membrane with DBBM), R+B (resorbable membrane with ß-TCP), and P+D (L-PRF with DBBM), and P+B (L-PRF and ß-TCP). Following 4 weeks of bone healing, the new bone amount for each group was measured by light microscopy (primary outcome) and microcomputed tomography (micro-CT) (secondary outcome). The mean values were compared at the 0.05 significance level. RESULTS: The P+D group showed the most newly formed bone in histology and in micro-CT analyses. L-PRF was more effective in bone regeneration when compared to nonresorbable and resorbable barrier membranes. Additionally, this study indicated DBBM was the more favorable osseous graft material for bone regeneration than ß-TCP when barrier membranes are used. CONCLUSION: From the results of this in vivo study using surgically created defects, L-PRF plays an effective role as a barrier membrane for lateral ridge augmentation. L-PRF may be an excellent barrier membrane in place of other nonresorbable and resorbable membranes.

Loss of Functional Dentition is Associated with Cognitive Impairment.

BACKGROUND: Although tooth loss is known to increase the risk of cognitive impairment and dementia, few studies have investigated the association between functional teeth including rehabilitated lost teeth and cognitive functionObjective:We investigated the associations of the numbers of functional teeth and functional occlusal units with cognitive impairment and cognitive function in late life. METHODS: The current study was conducted as a part of the Korean Longitudinal Study on Cognitive Aging and Dementia (KLOSCAD), a community-based elderly cohort study. We analyzed 411 participants who have agreed with the additional dental exam. Geriatric psychiatrists and neuropsychologists administered the Consortium to Establish a Registry for Alzheimer's disease Assessment Packet Clinical and Neuropsychological Assessment Battery to all participants, and dentists examined their dental status. RESULTS: Higher number of functional teeth (OR = 0.955, 95% CI = 0.914-0.997, p = 0.037) and higher number of functional occlusal units (OR = 0.900, 95% CI = 0.813-0.996, p = 0.042) were associated with lower odds of cognitive impairment. When we analyzed these relationships separated by the location of teeth, only the numbers of functional teeth (OR = 0.566, 95% CI = 0.373-0.857, p = 0.007) and functional occlusal units (OR = 0.399, 95% CI = 0.213-0.748, p = 0.004) in the premolar area were associated with lower odds of cognitive impairment. CONCLUSION: Loss of functional teeth and functional occlusal units (especially in the premolar region) were associated with increased cognitive impairment.

Development of an experimental model for radiation-induced inhibition of cranial bone regeneration.

BACKGROUND: Radiation therapy is widely employed in the treatment of head and neck cancer. Adverse effects of therapeutic irradiation include delayed bone healing after dental extraction or impaired bone regeneration at the irradiated bony defect. Development of a reliable experimental model may be beneficial to study tissue regeneration in the irradiated field. The current study aimed to develop a relevant animal model of post-radiation cranial bone defect. METHODS: A lead shielding block was designed for selective external irradiation of the mouse calvaria. Critical-size calvarial defect was created 2 weeks after the irradiation. The defect was filled with a collagen scaffold, with or without incorporation of bone morphogenetic protein 2 (BMP-2) (1 µg/ml). The non-irradiated mice treated with or without BMP-2-included scaffold served as control. Four weeks after the surgery, the specimens were harvested and the degree of bone formation was evaluated by histological and radiographical examinations. RESULTS: BMP-2-treated scaffold yielded significant bone regeneration in the mice calvarial defects. However, a single fraction of external irradiation was observed to eliminate the bone regeneration capacity of the BMP-2-incorporated scaffold without influencing the survival of the animals. CONCLUSION: The current study established an efficient model for post-radiation cranial bone regeneration and can be applied for evaluating the robust bone formation system using various chemokines or agents in unfavorable, demanding radiation-related bone defect models.

In Vivo Evaluation of 3D-Printed Polycaprolactone Scaffold Implantation Combined with ß-TCP Powder for Alveolar Bone Augmentation in a Beagle Defect Model.

Insufficient bone volume is one of the major challenges encountered by dentists after dental implant placement. This study aimed to evaluate the efficacy of a customized three-dimensional polycaprolactone (3D PCL) scaffold implant fabricated with a 3D bio-printing system to facilitate rapid alveolar bone regeneration. Saddle-type bone defects were surgically created on the healed site after extracting premolars from the mandibles of four beagle dogs. The defects were radiologically examined using computed tomography for designing a customized 3D PCL scaffold block to fit the defect site. After fabricating 3D PCL scaffolds using rapid prototyping, the scaffolds were implanted into the alveolar bone defects along with ß-tricalcium phosphate powder. In vivo analysis showed that the PCL blocks maintained the physical space and bone conductivity around the defects. In addition, no inflammatory infiltrates were observed around the scaffolds. However, new bone formation occurred adjacent to the scaffolds, rather than directly in contact with them. More new bone was observed around PCL blocks with 400/1200 lattices than around blocks with 400/400 lattices, but the difference was not significant. These results indicated the potential of 3D-printed porous PCL scaffolds to promote alveolar bone regeneration for defect healing in dentistry.

Influence of Acid, Ethanol, and Anthocyanin Pigment on the Optical and Mechanical Properties of a Nanohybrid Dental Composite Resin.

This study investigated the influences of acidity, ethanol, and pigment on the optical properties, microhardness, and surface roughness (Ra) of a nanohybrid dental composite resin. A total of 108 disc-shaped specimens were fabricated using a nanohybrid dental composite and allocated into 36 different storage solutions according to the levels of pH (2.0, 3.0, 4.0, and 5.5), ethanol (0%, 20%, and 40%), and anthocyanin pigment (0%, 2.5%, and 12.5%). Measurements of the colorimetric parameter and the amount of color change (ΔE), translucency parameter (TP), microhardness, and surface roughness (Ra) were performed at 24 h (baseline), 1-, 2-, 3-, and 4-weeks. Repeated measures of analysis of variance (ANOVA) with a Tukey honestly significant difference test and Pearson correlation analysis were carried out (α = 0.05). Pigment of 12.5% or 40% ethanol significantly increased the ΔE (P < 0.001, P = 0.048, respectively). Pigment of 2.5% or 12.5% significantly decreased the TP (P = 0.001, P < 0.001, respectively). Microhardness of composite resin stored in pH 2.0, 3.0, 4.0 solution was lower than that for pH 5.5 (P < 0.001). Pigment, ethanol, and pH did not influence the Ra. TP change and ΔE, and Ra and ΔE had a significant positive correlation (P < 0.05). In conclusion, pigment and ethanol levels influenced the optical properties and acidity affected the microhardness of composite resin.

Periodontal inflamed surface area as a novel numerical variable describing periodontal conditions.

PURPOSE: A novel index, the periodontal inflamed surface area (PISA), represents the sum of the periodontal pocket depth of bleeding on probing (BOP)-positive sites. In the present study, we evaluated correlations between PISA and periodontal classifications, and examined PISA as an index integrating the discrete conventional periodontal indexes. METHODS: This study was a cross-sectional subgroup analysis of data from a prospective cohort study investigating the association between chronic periodontitis and the clinical features of ankylosing spondylitis. Data from 84 patients without systemic diseases (the control group in the previous study) were analyzed in the present study. RESULTS: PISA values were positively correlated with conventional periodontal classifications (Spearman correlation coefficient=0.52; P<0.01) and with periodontal indexes, such as BOP and the plaque index (PI) (r=0.94; P<0.01 and r=0.60; P<0.01, respectively; Pearson correlation test). Porphyromonas gingivalis (P. gingivalis) expression and the presence of serum P. gingivalis antibodies were significant factors affecting PISA values in a simple linear regression analysis, together with periodontal classification, PI, bleeding index, and smoking, but not in the multivariate analysis. In the multivariate linear regression analysis, PISA values were positively correlated with the quantity of current smoking, PI, and severity of periodontal disease. CONCLUSIONS: PISA integrates multiple periodontal indexes, such as probing pocket depth, BOP, and PI into a numerical variable. PISA is advantageous for quantifying periodontal inflammation and plaque accumulation.