Physical properties and biocompatibility of an injectable calcium-silicate-based root canal sealer: in vitro and in vivo study.

BACKGROUND: The aim of this study was to investigate the physical properties and biological effects of an experimentally developed injectable premixed calcium-silicate root canal sealer (Endoseal) in comparison with mineral trioxide aggregate (MTA) and a resin-based sealer (AHplus). METHODS: The pH, solubility, dimensional change, flow, and radiopacity of the materials were evaluated. Biocompatibility was evaluated on the basis of cell morphology and a viability test using MC3T3-E1 cells. For evaluate inflammatory reaction, the tested sealers were implanted into dorsal subcutaneous connective tissue of Sprague Dawley rats. After 7 days, the implants with the surrounding tissue were retrieved, and histological evaluation was performed. RESULTS: Endoseal showed high alkalinity similar to that of MTA. The solubility of the tested materials was similar. The dimensional change and flow of Endoseal was significantly higher than that of other materials (P < 0.05). The radiopacity of Endoseal was lower than that of AHplus (P < 0.05). The biocompatibility was similar to those of MTA. Inflammatory reaction of Endoseal was similar with that of MTA, but lower than that of AHplus (P < 0.05). CONCLUSIONS: The present study indicates that Endoseal has favorable physical properties and biocompatibility. Therefore, we suggest that Endoseal has the potential to be used as a predictable root canal sealer.

Cemented versus cementless fixation of a tibial component in LCS mobile-bearing total knee arthroplasty performed by a single surgeon.

Although cemented tibial fixation of total knee arthroplasty accepted as the gold standard, cementless fixation as a means to supplement disadvantages of cemented fixation continues to be of interest to clinicians. One hundred sixty-eight consecutive knees undergoing primary knee arthroplasty for osteoarthritis were randomly assigned to receive either a cemented (86 knees) or cementless (82 knees) fixation of tibial component. We report the outcomes at 8 to 11years (mean, 9.5). The mean KSS, the HSS score, the mean WOMAC, the mean ranges of knee movement and radiological results were similar in both groups. No osteolysis was identified in either group. The rate of survival of the femoral and tibial components was 100% in both groups at final follow-up.

Physical properties and biological/odontogenic effects of an experimentally developed fast-setting α-tricalcium phosphate-based pulp capping material.

BACKGROUND: Recently, fast-setting α-tricalcium-phosphate (TCP) cement was developed for use in the pulp capping process. The aim of this study was to investigate the physical properties and biological effects of α-TCP cement in comparison with mineral trioxide aggregate (MTA). METHODS: We measured the setting time, pH values, compressive strength, and solubility of the two materials. We evaluated biocompatibility on the basis of cell morphology and a viability test using human dental pulp cells (hDPCs). Chemical composition of each material was analyzed by energy dispersive x-ray spectroscopic (EDS) analysis. The expression of odontogenic-related genes was evaluated by Western blotting and immunofluorescence. The calcified nodule formation was measured by Alizarin red staining. We performed the pulp capping procedure on rat teeth for histological investigation. The data were analyzed by an independent t-test for physical properties, one-way ANOVA for biological effects, and the Mann-Whitney U test for tertiary dentin formation. A P value of less than 0.05 was considered statistically significant for all tests. RESULTS: The setting time, pH values, and compressive strength of α-TCP was lower than that of MTA (P < 0.05); however, the solubility of α-TCP was higher than that of MTA (P < 0.05). The resultant cell viability observed with the two materials was similar (P > 0.05). Scanning electron microscopy (SEM) revealed that cells attached to both materials were flat and had cytoplasmic extensions. The expression of odontogenic-related markers and mineralized nodule formation were higher in the two experimental groups compared to the control group (P < 0.05). Continuous tertiary dentin was formed underneath the capping materials in all samples of the tested groups. CONCLUSIONS: Our study demonstrated that the α-TCP exhibited biocompatibility and odontogenicity comparable to MTA, whereas it had a quicker setting time.

Surface property changes observed in zirconia during etching with high-concentration hydrofluoric acid over various immersion times.

This study investigated the degree of phase transformation, surface roughness, and bond strength of zirconia immersed for various times in a 40% hydrofluoric acid (HF) solution. Non-etched sintered zirconia specimens were used as the control, while experimental groups were etched with a 40% HF solution for 5, 10, 20, 40, 80, 160 and 320 min. In each of the control and experimental groups, five specimens for X-ray diffraction analysis, four for surface morphology and surface roughness analysis, and ten for bonding strength measurement were used. As a result, the surface roughness of zirconia increased as the application time increased during the 40% HF etching, but the bond strength between zirconia and resin cement did not increase proportionally. The phase transformation from tetragonal to monoclinic also gradually increased with application time.

Evaluation of the root dentin bond strength and intratubular biomineralization of a premixed calcium aluminate-based hydraulic bioceramic endodontic sealer.

PURPOSE: This study evaluated the dentin bonding strength and biomineralization effect of a recently developed premixed calcium aluminate-based endodontic sealer (Dia-Root Bio Sealer) in comparison with existing calcium silicate-based sealers. METHODS: The root canals of 80 mandibular premolars were filled with Dia-Root Bio Sealer, Endoseal MTA, EndoSequence BC Sealer, and AH Plus Bioceramic Sealer. Medial and apical specimens were then obtained by sectioning. The push-out bond strength was measured using the medial specimens, and the failure mode was recorded. Intratubular biomineralization in the apical specimens was analyzed using scanning electron microscopy and energy-dispersive X-ray spectroscopy (EDS). The data were analyzed using one-way analysis of variance followed by the Tukey test (P < 0.05). RESULTS: The push-out bond strength of Dia-Root Bio Sealer was significantly higher than that of the other tested materials, and a cohesive failure pattern was observed in all groups. Dia-Root Bio Sealer also exhibited a significantly higher degree of biomineralization than the other groups, and EDS analysis indicated that the biomineralized precipitates were amorphous calcium phosphate. CONCLUSION: The results of this study indicate that Dia-Root Bio Sealer has the potential to be used as an adequate root canal sealer due to its favorable bonding performance.

Effects of barium titanate on the dielectric constant, radiopacity, and biological properties of tricalcium silicate-based bioceramics.

This study evaluated the effect of barium titanate (BT) on the dielectricity, radiopacity, and biological properties of tricalcium silicate (C3S). C3S/BT samples were prepared with varying proportions of BT (0, 20, 40, and 60 wt%; referred to as BT00, BT20, BT40, and BT60, respectively). Dielectric constant and radiopacity were measured. Cytocompatibility was evaluated on human dental pulp cells. After surgical procedures on rat mandible, immunohistochemistry and Masson's trichrome staining were performed. The dielectric constant increased with higher proportions of BT (p<0.05). BT40 and BT60 satisfied the clinical guideline of radiopacity. There were no significant differences among groups in the cytocompatibility tests (p>0.05). New bone was observed well, along with the expressions of the dentin matrix protein 1 (DMP1), osteocalcin (OC), and osteonectin (ON) in BT40 and BT60. Conclusively, the contents of 40-60 wt% of BT in C3S provided proper radiopacity, favorable cytocompatibility, and beneficial effect on bone regeneration.

Push-out bond strength and intratubular biomineralization of a hydraulic root-end filling material premixed with dimethyl sulfoxide as a vehicle.

Objectives: This study was designed to evaluate the parameters of bonding performance to root dentin, including push-out bond strength and dentinal tubular biomineralization, of a hydraulic bioceramic root-end filling material premixed with dimethyl sulfoxide (Endocem MTA Premixed) in comparison to a conventional powder-liquid-type cement (ProRoot MTA). Materials and Methods: The root canal of a single-rooted premolar was filled with either ProRoot MTA or Endocem MTA Premixed (n = 15). A slice of dentin was obtained from each root. Using the sliced specimen, the push-out bond strength was measured, and the failure pattern was observed under a stereomicroscope. The apical segment was divided into halves; the split surface was observed under a scanning electron microscope, and intratubular biomineralization was examined by observing the precipitates formed in the dentinal tubule. Then, the chemical characteristics of the precipitates were evaluated with energy-dispersive X-ray spectroscopic (EDS) analysis. The data were analyzed using the Student's t-test followed by the Mann-Whitney U test (p < 0.05). Results: No significant difference was found between the 2 tested groups in push-out bond strength, and cohesive failure was the predominant failure type. In both groups, flake-shaped precipitates were observed along dentinal tubules. The EDS analysis indicated that the mass percentage of calcium and phosphorus in the precipitate was similar to that found in hydroxyapatite. Conclusions: Regarding bonding to root dentin, Endocem MTA Premixed may have potential for use as an acceptable root-end filling material.

Effects of different silica-based layer coatings on bond strength of Y-TZP to bovine dentin.

This study investigated the effects of different silica-based layer coatings on shear bond strength (SBS) between Y-TZP and bovine dentin. Three different silica-based layer coatings were applied to the Y-TZP surface: tribochemical silica coating, vitrification (glaze coating), and composite resin sintering. A silane coupling agent (SIL) was applied to the silica-coated Y-TZP surface in the presence or absence of hydrofluoric acid (HF) treatment. A one-step adhesive was then applied to the silica-coated Y-TZP and cemented to bovine dentin using MDP-free resin cement. The SBS value of the tribochemical silica coating group was lowest among the experimental groups, while the HF+SIL subgroup showed the highest SBS value after vitrification (p<0.05). While hydrofluoric acid etching did not affect the SBS value of the tribochemical silica coating group, it affected the SBS value in the vitrification and composite resin sintering groups (p<0.05).

Surgical management of an accessory canal in a maxillary premolar: a case report.

We report the surgical endodontic treatment of a maxillary first premolar with a lateral lesion that originated from an accessory canal. Although lesions originating from accessory canals frequently heal with simple conventional endodontic therapy, some lesions may need additional and different treatment. In the present case, conventional root canal retreatment led to incomplete healing with the need for further treatment (i.e., surgery). Surgical endodontic management with a fast-setting calcium silicate cement was performed on the accessory canal using a dental operating microscope. At the patient's 9-month recall visit, the lesion was resolved upon radiography.

Effects of dodecacalcium hepta-aluminate content on the setting time, compressive strength, alkalinity, and cytocompatibility of tricalcium silicate cement.

OBJECTIVE: This study aimed to investigate the effects of dodecacalcium hepta-aluminate (C12A7) content on some physicochemical properties and cytocompatibility of tricalcium silicate (C3S) cement using human dental pulp cells (hDPCs). MATERIAL AND METHODS: High purity C3S cement was manufactured by a solid phase method. C12A7 was mixed with the cement in proportions of 0, 5, 8, and 10 wt% (C12A7-0, -5, -8, and -10, respectively). Physicochemical properties including initial setting time, compressive strength, and alkalinity were evaluated. Cytocompatibility was assessed with cell viability tests and cell number counts. Statistical analysis was performed by using one-way analysis of variance (ANOVA) and Tukey's test (p<0.05). RESULTS: The initial setting time of C3S-based cement was shorter in the presence of C12A7 (p<0.05). After 1 day, C12A7-5 showed significantly higher compressive strength than the other groups (p<0.05). After 7 days, the compressive strength of C12A7-5 was similar to that of C12A7-0, whereas other groups showed strength lower than C12A7-0. The pH values of all tested groups showed no significant differences after 1 day (p>0.05). The C12A7-5 group showed similar cell viability to the C12A7-0 group (p>0.05), while the other experimental groups showed lower values compared to C12A7-0 group (p<0.05). The number of cells grown on the C12A7-5 specimen was higher than that on C12A7-8 and -10 (p<0.05). CONCLUSIONS: The addition of C12A7 to C3S cement at a proportion of 5% resulted in rapid initial setting time and higher compressive strength with no adverse effects on cytocompatibility.

The effect of continuous application of MDP-containing primer and luting resin cement on bond strength to tribochemical silica-coated Y-TZP.

OBJECTIVES: This study investigated the effect of continuous application of 10-methacryloyloxydecyldihydrogen phosphate (MDP)-containing primer and luting resin cement on bond strength to tribochemical silica-coated yttria-stabilized tetragonal zirconia polycrystal (Y-TZP). MATERIALS AND METHODS: Forty bovine teeth and Y-TZP specimens were prepared. The dentin specimens were embedded in molds, with one side of the dentin exposed for cementation with the zirconia specimen. The Y-TZP specimen was prepared in the form of a cylinder with a diameter of 3 mm and a height of 10 mm. The bonding surface of the Y-TZP specimen was sandblasted with silica-coated aluminium oxide particles. The forty tribochemical silica-coated Y-TZP specimens were cemented to the bovine dentin (4 groups; n = 10) with either an MDP-free primer or an MDP-containing primer and either an MDP-free resin cement or an MDP-containing resin cement. After a shear bond strength (SBS) test, the data were analyzed using 1-way analysis of variance and the Tukey test (α = 0.05). RESULTS: The group with MDP-free primer and resin cement showed significantly lower SBS values than the MDP-containing groups (p < 0.05). Among the MDP-containing groups, the group with MDP-containing primer and resin cement showed significantly higher SBS values than the other groups (p < 0.05). CONCLUSIONS: The combination of MDP-containing primer and luting cement following tribochemical silica coating to Y-TZP was the best choice among the alternatives tested in this study.

Root Canal Filling Quality of a Premixed Calcium Silicate Endodontic Sealer Applied Using Gutta-percha Cone-mediated Ultrasonic Activation.

INTRODUCTION: The aim of this study was to investigate the filling quality of a recently developed premixed calcium silicate-based endodontic sealer (Endoseal MTA) with a single gutta-percha (GP) cone technique compared with a resin-based sealer (AH plus) with warm vertical compaction. We also explored the effect of GP cone-mediated ultrasonic activation on the filling quality of Endoseal MTA. METHODS: Thirty human single-rooted maxillary premolars with ribbon-shaped canals were prepared and assigned to 3 experimental groups according to filling method: EMS group was Endoseal MTA + single-cone; EMSU group was Endoseal MTA + single-cone with ultrasonic activation; and the APW group was AH plus + warm vertical compaction. Each tooth was scanned using micro-computed tomography (µ-CT), and the proportions of sections with void and the volume percentages of void were calculated. Then, the tooth was sectioned transversely, and the presence of void in the slices was scored under a stereomicroscope. The data were statistically analyzed using 1-way analysis of variance and Tukey tests to detect any significance (α = 0.05). RESULTS: In the µ-CT assessment, there was no significant difference among the groups regarding the proportion of sections with void and the void volume percentage (P > .05). However, in the stereomicroscopic evaluation, the EMS group showed a higher number of voids and a higher void score compared with the other groups (P < .05). CONCLUSION: Endoseal MTA performs best when used with GP cone-mediated ultrasonic activation. Furthermore, stereomicroscopic observation of sections of the specimens should be performed when evaluating root canal filling quality.

Effect of adhesive luting on the fracture resistance of zirconia compared to that of composite resin and lithium disilicate glass ceramic.

OBJECTIVES: The purpose of this study was to evaluate the effect of adhesive luting on the fracture resistance of zirconia compared to that of a composite resin and a lithium disilicate glass ceramic. MATERIALS AND METHODS: The specimens (dimension: 2 mm × 2 mm × 25 mm) of the composite resin, lithium disilicate glass ceramic, and yttria-stabilized tetragonal zirconia polycrystal (Y-TZP) were prepared. These were then divided into nine groups: three non-luting groups, three non-adhesive luting groups, and three adhesive luting groups, for each restorative material. In the non-luting groups, specimens were placed on the bovine tooth without any luting agents. In the non-adhesive luting groups, only zinc phosphate cement was used for luting the specimen to the bovine tooth. In the adhesive luting groups, specimens were pretreated, and the adhesive luting procedure was performed using a self-adhesive resin cement. For all the groups, a flexural test was performed using universal testing machine, in which the fracture resistance was measured by recording the force at which the specimen was fractured. RESULTS: The fracture resistance after adhesive luting increased by approximately 29% in the case of the composite resin, 26% in the case of the lithium disilicate glass ceramic, and only 2% in the case of Y-TZP as compared to non-adhesive luting. CONCLUSIONS: The fracture resistance of Y-TZP did not increased significantly after adhesive luting as compared to that of the composite resin and the lithium disilicate glass ceramic.

Effective healing of chronic rotator cuff injury using recombinant bone morphogenetic protein-2 coated dermal patch in vivo.

Biologic augmentation for rotator cuff repair is a challenging treatment in patients with chronic large, massive, and irreparable rotator cuff injuries. Particularly, the use of an extracellular matrix (ECM) patch such as dermal tissue offered improved biomechanical properties in previous studies. Cytokines induce cell chemotaxis, proliferation, matrix synthesis, and cell differentiation. Moreover, osteoinductive growth factors such as bone morphogenetic protein-2 (BMP-2) affect the formation of new bone and fibrocartilage in lesions. However, the effects of using a dermal patch in combination with BMP-2 have not been evaluated to date, although many researchers have recognized the importance thereof. In this study, rhBMP-2-coated dermal patch (1 cm × 2 cm) isolated from human cadaveric donor was inserted in a rabbit model of chronic rotator cuff injury for in vivo evaluation. Bone mineral density and biomechanical strength were tested and histological and histomorphometric analyses were performed. The results showed that insertion of an rhBMP-2-coated acellular dermal patch not only significantly ameliorated new bone formation, it also improved biomechanical properties such as ultimate tensile strength. Thus, the use of this combination may improve the chronic rotator cuff injury-healing rate and clinical outcomes after rotator cuff repair. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 105B: 1840-1846, 2017.

Recognition and management of palatogingival groove for tooth survival: a literature review.

Palatogingival groove (PGG) is an anomaly in the maxillary anterior teeth, often accompanied by the area of bony destruction adjacent to the teeth with no carious or traumatic history. The hidden trap in the tooth can harbor plaque and bacteria, resulting in periodontal destruction with or without pulpal pathologic change. Related diseases can involve periodontal destruction, combined endodontic-periodontal lesions, or separate endodontic and periodontal lesions. Disease severity and prognosis related to PGG depend on several factors, including location, range, depth, and type of the groove. Several materials have been used and recommended for cases of extensive periodontal destruction from PGG to remove and block the inflammatory source and recover the health of surrounding periodontal tissues. Even in cases of severe periodontal destruction, several studies have reported favorable treatment outcomes with proper management. With new options in diagnosis and treatment, clinicians need a detailed understanding of the characteristics, treatment, and prognosis of PGG to successfully manage the condition.

Removal efficacy and cytotoxicity of a calcium hydroxide paste using N-2-methyl-pyrrolidone as a vehicle.

OBJECTIVES: This study investigated the removal efficacy and cytotoxicity of a newly developed calcium hydroxide paste (cleaniCal, Maruchi) using N-2-methyl-pyrrolidone (NMP) as a vehicle in comparison with ApexCal (Ivoclar Vivadent) and Calcipex II (Nishika), which use different vehicles such as polyethylene glycol and propylene glycol, respectively. MATERIALS AND METHODS: Thirty maxillary premolars with oval-shaped canals were divided into 3 groups and the teeth were filled with one of the pastes. After removal of the paste, micro-computed tomographic (µ-CT) imaging was obtained to assess the volume of residual paste in the root canal of each tooth. The teeth were then split longitudinally and the area of the paste-coated surface was evaluated by stereomicroscopy. The cytotoxicity of each product was assessed using an agar overlay assay. The effect of each vehicle on cell viability was evaluated using the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay. The data were analyzed using one-way analysis of variance and Tukey's tests to detect any significance (p < 0.05). RESULTS: In the µ-CT and stereomicroscopic analysis, cleaniCal exhibited less remnants of medicament than ApexCal and Calcipex. cleaniCal showed a higher cytotoxicity than the other pastes in the agar overlay assay. Furthermore, NMP exhibited lower cell viability compared to the other vehicles. CONCLUSIONS: cleaniCal showed better removal efficacy compared to the other products. However, clinicians should be aware of the higher cytotoxicity of the NMP-based material and consider its possible adverse effects on periradicular tissue when it is overfilled.

Effects of epicatechin, a crosslinking agent, on human dental pulp cells cultured in collagen scaffolds.

OBJECTIVE: The purpose of this study was to investigate the biological effects of epicatechin (ECN), a crosslinking agent, on human dental pulp cells (hDPCs) cultured in collagen scaffolds. MATERIAL AND METHOD: To evaluate the effects of ECN on the proliferation of hDPCs, cell counting was performed using optical and fluorescent microscopy. Measurements of alkaline phosphatase (ALP) activity, alizarin red staining, and real-time polymerase chain reactions were performed to assess odontogenic differentiation. The compressive strength and setting time of collagen scaffolds containing ECN were measured. Differential scanning calorimetry was performed to analyze the thermal behavior of collagen in the presence of ECN. RESULTS: Epicatechin increased ALP activity, mineralized nodule formation, and the mRNA expression of dentin sialophosphoprotein (DSPP), a specific odontogenic-related marker. Furthermore, ECN upregulated the expression of DSPP in hDPCs cultured in collagen scaffolds. Epicatechin activated the extracellular signal-regulated kinase (ERK) and the treatment with an ERK inhibitor (U0126) blocked the expression of DSPP. The compressive strength was increased and the setting time was shortened in a dose-dependent manner. The number of cells cultured in the ECN-treated collagen scaffolds was significantly increased compared to the cells in the untreated control group. CONCLUSIONS: Our results revealed that ECN promoted the proliferation and differentiation of hDPCs. Furthermore, the differentiation was regulated by the ERK signaling pathway. Changes in mechanical properties are related to cell fate, including proliferation and differentiation. Therefore, our study suggests the ECN treatment might be desirable for dentin-pulp complex regeneration.

In vitro evaluation of a newly produced resin-based endodontic sealer.

OBJECTIVES: A variety of root canal sealers were recently launched to the market. This study evaluated physicochemical properties, biocompatibility, and sealing ability of a newly launched resin-based sealer (Dia-Proseal, Diadent) compared to the existing root canal sealers (AHplus, Dentsply DeTrey and ADseal, Metabiomed). MATERIALS AND METHODS: The physicochemical properties of the tested sealers including pH, solubility, dimensional change, and radiopacity were evaluated. Biocompatibility was measured using the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay. For microleakage test, single-rooted teeth were instrumented, and obturated with gutta-percha and one of the sealers (n = 10). After immersion in 1% methylene blue solution for 2 weeks, the specimens were split longitudinally. Then, the maximum length of staining was measured. Statistical analysis was performed by one-way analysis of variance followed by Tukey test (p = 0.05). RESULTS: Dia-Proseal showed the highest pH value among the tested sealers (p < 0.05). ADseal showed higher dimensional change compared to AHplus and Dia-Proseal (p < 0.05). The solubility values of AHplus and Dia-Proseal were similar, whereas ADseal had the lowest solubility value (p < 0.05). The flow values of sealer in increasing order were AHplus, DiaProseal, and ADseal (p < 0.05). The radiopacity of AHplus was higher than those of ADseal and Dia-Proseal (p < 0.05). The cell viability of the tested materials was statistically similar throughout the experimental period. There were no significant differences in microleakage values among the tested samples. CONCLUSIONS: The present study indicates that Dia-Proseal has acceptable physicochemical properties, biocompatibility, and sealing ability.

Genipin, a cross-linking agent, promotes odontogenic differentiation of human dental pulp cells.

INTRODUCTION: The aim of this study was to investigate the effects of genipin, a natural collagen cross-linking agent, on odontogenic differentiation of human dental pulp cells (hDPCs) because the mechanical properties of collagen allow it to serve as a scaffold for engineering of pulp-dentin complex. Furthermore, the role of extracellular signal-regulated kinase (ERK) was investigated as a mediator of the differentiation. METHODS: The odontogenic differentiation was analyzed by alkaline phosphatase activity, real time-polymerase chain reaction, Western blotting, and alizarin red S staining. The morphologic features of hDPCs cultured in genipin-treated collagen were evaluated by scanning electron microscopy. For the assessment of mechanical properties of collagen treated with genipin, the surface roughness and compressive strength were measured. RESULTS: Alkaline phosphatase activity, the expression of odontogenic markers, and mineralized nodule formation increased in the genipin-treated group. Genipin also activated ERK, and treatment with ERK inhibitor blocked the expression of the markers. The cells cultured in genipin-treated collagen spread across the substrate and attached in close proximity to one another. The proliferation and differentiation of hDPCs cultured in genipin-treated collagen were facilitated. The mechanical properties of collagen, such as surface roughness and compressive strength, were increased by treatment with genipin. CONCLUSIONS: Our results show that genipin promotes odontogenic differentiation of hDPCs via the ERK signaling pathway. Furthermore, the enhanced mechanical properties of the collagen scaffold induced by genipin may play important roles in cell fate. Consequently, the application of genipin might be a new strategy for dentin-pulp complex regeneration.

Adhesion of endodontic sealers to dentin and gutta-percha.

Adhesion of endodontic sealers to dentin and gutta-percha offers clues into their interaction with the wall of the root canal and the filling material. In this in vitro study, four classes of endodontic sealers (Kerr, a ZOE-based sealer; Sealapex, a calcium hydroxide-based sealer; AH 26, an epoxy resin-based system; and Ketac-Endo, a glass-ionomer based sealer) were compared for their ability to bond to dentin or gutta-percha. Flat coronal dentin or gutta-percha surfaces were created by using a diamond-impregnated saw blade. Aluminum cylinders (ca. 5-mm diameter) were stabilized on the substrates with small amounts of wax and then filled with one of the sealers. After setting in 100% humidity for 24 h, their tensile bond strengths were measured. Controls were the unfilled cylinders stabilized with wax. The bond strengths and modes of failure were measured. The results were statistically analyzed by using a two-way ANOVA (materials versus substrates) and Student-Newman-Keuls test at alpha = 0.05. The results indicated that sealant bond strengths to dentin (from lowest to highest mean +/- SD, n = 10) were: Kerr 0.13 +/- 0.02; Sealapex 0.30 +/- 0.08; Ketac-Endo 0.80 +/- 0.24; AH 26 2.06 +/- 0.53 MPa. The latter two were significantly different (p < 0.05) from the first two sealers and from themselves. The sealant bond strength to gutta-percha (from lowest to highest mean +/- SD, n = 10) were: Ketac-Endo 0.19 +/- 0.01; Sealapex 0.22 +/- 0.01; Kerr 1.07 +/- 0.19; AH 26 2.93 +/- 0.29 MPa. AH 26 gave the significantly highest bonds to gutta-percha.