Occurrence and characteristics of microplastics in fish of the Han River, South Korea: Factors affecting microplastic abundance in fish.

This study examined the abundance of microplastics (MPs) in 106 fish from 22 species inhabiting three sites of the Han River, South Korea. In total, 1753 MPs from 106 fish samples were identified with an average abundance of 15.60 ± 13.45 MPs per individual fish (MPs indiv-1) in the North Han River, 16.35 ± 12.32 MPs indiv-1 in the South Han River, and 20.14 ± 10.01 MPs indiv-1 in downstream of the Han River, indicating that the fish in the downstream of the Han River was the most contaminated by MPs. The dominant size of MPs detected in fish ranged between 0.1 and 0.2 mm, and the most common polymer types found in fish were polypropylene (PP) (≥40%) and polyethylene (PE) (≥23%), followed by polytetrafluoroethylene (PTFE) (≥16%) at all sampling locations. A significant correlation was observed between the log-transformed number of MPs with log-transformed fish length (p < 0.01) and with log-transformed fish weight (p < 0.01). The Kruskal-Wallis test disclosed a significant difference in the number of MPs among the feeding habits (p < 0.01), indicating that omnivorous and insectivorous fish contained more MPs than carnivorous and herbivorous fish. In addition, fish habitat result showed that pelagic fish contained a higher level of MPs than demersal fish, but no significant differences in the number of MPs among fish habitats were observed (p > 0.05).

The Preventive Effect of the Phenotype of Tumour-Associated Macrophages, Regulated by CD39, on Colon Cancer in Mice.

BACKGROUND: This study was designed to investigate the effect of cluster differentiation (CD)39 and CD73 inhibitors on the expresion of tumour-associated macrophages (TAMs), M1- versus M2-tumour phenotypes in mice with colon cancer. METHODS: An in vivo study of co-culture with colon cancer cells and immune cells from the bone marrow (BM) of mice was performed. After the confirmation of the effect of polyoxotungstate (POM-1) as an inhibitor of CD39 on TAMs, the mice were randomly divided into a control group without POM-1 and a study group with POM-1, respectively, after subcutaneous injection of CT26 cells. On day 14 after the injection, the mice were sacrificed, and TAMs were evaluated using fluorescence-activated cell sorting. RESULTS: In the in vivo study, the co-culture with POM-1 significantly increased the apoptosis of CT26 cells. The cell population from the co-culture with POM-1 showed significant increases in the expression of CD11b+ for myeloid cells, lymphocyte antigen 6 complex, locus C (Ly6C+) for monocytes, M1-tumour phenotypes from TAMs, and F4/80+ for macrophages. In the in vivo study, tumour growth in the study group with POM-1 was significantly limited, compared with the control group without POM-1. The expressions of Ly6C+ and major histocompatibility complex class II+ for M1-tumour phenotypes from TAMs on F4/80+ from the tumour tissue in the study group had significantly higher values compared with the control group. CONCLUSION: The inhibition of CD39 with POM-1 prevented the growth of colon cancer in mice, and it was associated with the increased expression of M1-tumour phenotypes from TAMs in the cancer tissue.

Biomedical and Clinical Importance of Mussel-Inspired Polymers and Materials.

The substance secreted by mussels, also known as nature's glue, is a type of liquid protein that hardens rapidly into a solid water-resistant adhesive material. While in seawater or saline conditions, mussels can adhere to all types of surfaces, sustaining its bonds via mussel adhesive proteins (MAPs), a group of proteins containing 3,4-dihydroxyphenylalanine (DOPA) and catecholic amino acid. Several aspects of this adhesion process have inspired the development of various types of synthetic materials for biomedical applications. Further, there is an urgent need to utilize biologically inspired strategies to develop new biocompatible materials for medical applications. Consequently, many researchers have recently reported bio-inspired techniques and materials that show results similar to or better than those shown by MAPs for a range of medical applications. However, the susceptibility to oxidation of 3,4-dihydroxyphenylalanine poses major challenges with regard to the practical translation of mussel adhesion. In this review, various strategies are discussed to provide an option for DOPA/metal ion chelation and to compensate for the limitations imposed by facile 3,4-dihydroxyphenylalanine autoxidation. We discuss the anti-proliferative, anti-inflammatory, anti-microbial activity, and adhesive behaviors of mussel bio-products and mussel-inspired materials (MIMs) that make them attractive for synthetic adaptation. The development of biologically inspired adhesive interfaces, bioactive mussel products, MIMs, and arising areas of research leading to biomedical applications are considered in this review.

Plasma modification of poly(2-heptadecyl-4-vinylthieno[3,4-d]thiazole) low bandgap polymer and its application in solar cells.

For the first time, we here propose a green methodology to modify a low bandgap polymer for highly efficient solar cells using atmospheric pressure plasma jet or soft plasma operating on different feeding gases (air, Ar and N2). The physical properties of the modified polymer were investigated using conductivity measurements, UV-visible spectroscopy, photoluminescence spectroscopy, X-ray photoelectron spectroscopy, cyclic voltammograms, atomic force microscopy, cathodoluminescence and confocal Raman spectroscopy. Further, we examined the variation of the work function of the polymer before and after plasma treatment using a γ-focused ion beam. Additionally, photovoltaic cells based on the plasma-modified polymer having ITO/PEDOT:PSS/PHVTT (with or without plasma modification):PC71BM/LiF/Al configuration were fabricated and then characterized. We found that the power conversion efficiency (PCE) of the plasma-modified polymer increased dramatically as compared to the control polymer (without plasma treatment). PCE of the control polymer was found to be 4.11%, while after air, Ar and N2 gas plasma treatment the polymer showed PCEs of 4.85%, 4.87% and 5.14% respectively. Thus, plasma treatment not only alters the surface properties, but also modifies the bulk properties (changes in HOMO and LUMO bandgap level). Hence, this work provides new dimensions to explore more about plasma and polymer chemistry.

Maternal exposure to polystyrene microplastics impairs social behavior in mouse offspring with a potential neurotoxicity.

As plastic production has been increasing steadily, environmental pollution resulting from microplastics (MPs) continues to draw considerable attention of the researchers. Several studies have reported that MPs are risk factors for various cellular and systemic dysfunctions. However, the effects of chronic MP exposure from the embryonic stage to adulthood on mouse brain remain unclear. Accordingly, determining the impacts of maternal exposure to MPs on mouse offspring was the main goal of this study. To this end, single cells of primary cortical neurons were isolated from mouse embryos. Subsequently, the cells were exposed to 2 µm polystyrene microplastics (PS-MPs), which resulted in a notable reduction in dendritic length, and PS-MPs cannot pass through the cellular membrane of neurons. Moreover, exposure to PS-MPs caused the proliferation increase and apoptosis in primary cortical neuronal cells. We then evaluated the neurotoxicity associated with chronic PS-MP exposure from the embryonic stage to adulthood in C57BL/6 J mouse offspring. PS-MPs were found to accumulate in the digestive and excretory organs of the offspring but not in the brain tissue. However, offspring exposed to PS-MPs exhibited no differences in the levels of expression of genes related to brain cell markers or synaptic organization. Nevertheless, PS-MP-exposed mice exhibited impaired social novelty preferences; however, no changes were observed in the emotional, compulsive, or cognitive behaviors. Taken together, these results demonstrate the potential neurotoxic effects of chronic exposure to PS-MPs in mouse offspring.

Exposure to polystyrene particles causes anxiety-, depression-like behavior and abnormal social behavior in mice.

In the era of plastic use, organisms are constantly exposed to polystyrene particles (PS-Ps). PS-Ps accumulated in living organisms exert negative effects on the body, although studies evaluating their effects on brain development are scarce. In this study, the effects of PS-Ps on nervous system development were investigated using cultured primary cortical neurons and mice exposed to PS-Ps at different stages of brain development. The gene expression associated with brain development was downregulated in embryonic brains following PS-Ps exposure, and Gabra2 expression decreased in the embryonic and adult mice exposed to PS-Ps. Additionally, offspring of PS-Ps-treated dams exhibited signs of anxiety- and depression-like behavior, and abnormal social behavior. We propose that PS-Ps accumulation in the brain disrupts brain development and behavior in mice. This study provides novel information regarding PS-Ps toxicity and its harmful effects on neural development and behavior in mammals.

Temporal and spatial distribution of microplastic in the sediment of the Han River, South Korea.

Sediments are sinks for microplastics (MPs) in freshwater environments. It is, therefore, necessary to investigate the occurrence and fate of accumulated MPs in the sediments, which pose a risk to aquatic organisms. We conducted the first comprehensive investigation of MPs in riverine sediment in South Korea to examine the temporal and spatial distribution of MPs in the sediment at the two main branches and downstream of the Han River. The average abundance of MPs over all sites was 0.494 ± 0.280 particles/g. Spatially, the MP abundance at three sites in the North Han River (0.546 ± 0.217 particles/g) was higher than those in the South Han River (0.383 ± 0.145 particles/g) and downstream of the Han River (0.417 ± 0.114 particles/g). The abundances of MPs before dams at two upstream sites were significantly higher than that at other sites because of the slow river flow velocity attributed to the artificial structure. The abundance of MPs after the mosoon season (October, 0.600 ± 0.357 particles/g) was higher than that before the mosoon season (April, 0.389 ± 0.099 particles/g). The most common polymer types observed were polyethylene (>38%) and polypropylene (>24%). Irrespective of the location and season, greater than 93% of MPs identified were fragments, and the remaining were fibers. The concentrations of TOC, TN, and TP in the sediment were positively correlated with MP abundance. MP abundance was also positively correlated with clay and silt fractions of the sediment; however, it was negatively correlated with sand fraction. This study provides a basis for the management of MP pollution by offering findings related to critical factors influencing MP abundance in sediment.

Polyacetylenes from the roots of Cirsium japonicum var. ussuriense.

Eight previously undescribed polyacetylenes, cirussurynes A-H, were isolated from the methanolic extract of the roots of Cirsium japonicum var. ussuriense. Their structures were elucidated by interpretation of extensive 1D and 2D NMR spectroscopy and HRESIMS spectrometry data. The configuration of triols in cirussurynes A, B, and E-G was deduced by the J-value based configuration analysis together with specific rotation values. All compounds were evaluated for their inhibitory effects on nitric oxide production against LPS-induced RAW 264.7 macrophages, and exhibited IC50 values ranging from 5.5 to 68.7 µM.

A comparative study of deep learning-based network model and conventional method to assess beach debris standing-stock.

The conventional survey of marine debris standing-stock has various drawbacks such as high cost and inaccuracy because the total amount of debris in the whole beach is inferred using the results of the manual investigation in selected narrow areas. To overcome the disadvantages, an automatic detection method using a deep learning-based network model was developed to detect and quantify the beach debris. The network model developed in this study classified items with a precision of 0.87 (87%) mAP and showed <5% error compared to actual survey. This study is the first fieldwork in Korea that shows the difference between automatic and conventional methods to predict the beach debris standing-stock. The results provide essential information for the development of effective beach debris management systems and policies.

Differences in Utilization of Medical and Dental Services among Homeless People in South Korea.

(1) Background: Homelessness contributes to both needs for care and barriers to access. This study aimed to explore the utilization of medical or dental services using Andersen's model for a vulnerable population of homeless in South Korea. (2) Methods: The data were applied from the first national survey for homeless people in South Korea, 2016. Totally 2032 persons participated in the interview survey. This study team requested the raw data through the public portal and analyzed them. (3) Results: The participants who were homeless for more than ten years, staying in small rooming house or shelter, non-employed, earning less than 500,000 won per month, and having a medical condition showed a significantly higher chance of using Medicaid. The use of outreach programs had a significant relationship with gender, duration of homelessness, and monthly income. Among dental patients, the homeless who did not consume alcohol, stayed in a shelter, and were employed had higher chances of using dental service. (4) Conclusions: Medicaid service was strongly related to enabling factors but outreach programs with predisposing factors. Dental service showed strong relationships with the enabling domain, but the pattern was opposite: the jobless had less chance to avail it. The policymakers need to consider these domains of service utilization to provide equitable access to healthcare services.

Occurrence of microplastics in the Han River and riverine fish in South Korea.

Microplastic pollution has been paid attention due to the possibly global threat to human health and ecosystem in recent years. In this study, we investigated the distribution of microplastics in the Han River and its tributaries, South Korea, and in six species of inhabiting fish, namely carp (C. carpio), crucian carp (C. cuvieri), bluegill (L. macrochirus), bass (M. salmoides), catfish (S. asotus), and snakehead (C. argus). We found that the concentration of microplastics in the surface waters (0 m) was 0-42.9 particles/m3 (mean: 7.0 ± 12.9 particles/m3) compared to 20.0-180.0 particles/m3 (mean: 102.0 ± 50.3 particles/m3) at a depth of 2 m. Concentrations in the river tributaries ranged from 1.2 to 234.5 particles/m3 (mean: 91.1 ± 72.3 particles/m3). The most common types the plastic identified were polyethylene (PE), silicone, and polystyrene, while polytetrafluoroethylene (PTFE), polyethylene, and polyester dominated in the tributaries. With respect to shape, >73% of the recovered microplastics were fragments and the rest were fibers in the water. We also measured the concentration of microplastics in the intestines of fish, which ranged from 4 to 48 particles/fish (mean: 22.0 ± 16.0 particles/fish). The most common types of plastic found in the sampled fish were polytetrafluoroethylene (PFTE), polyethylene (PE), and rayon, and >94% of all the microplastic found in fish was in the form of fragments with the remainder being fibers. The concentrations of microplastic in the gills of fish ranged from 1 to 16 particles/fish (mean: 8.3 ± 6.0 particles/fish). In contrast, no microplastic was found in the flesh of the sampled fish. Our results imply that the ingestion of microplastics by fish is more closely related to habitat rather than feeding habits.

A photonic sintering derived Ag flake/nanoparticle-based highly sensitive stretchable strain sensor for human motion monitoring.

Recently, the demand for stretchable strain sensors used for detecting human motion is rapidly increasing. This paper proposes high-performance strain sensors based on Ag flake/Ag nanocrystal (NC) hybrid materials incorporated into a polydimethylsiloxane (PDMS) elastomer. The addition of Ag NCs into an Ag flake network enhances the electrical conductivity and sensitivity of the strain sensors. The intense localized heating of Ag flakes/NCs is induced by intense pulsed light (IPL) irradiation, to achieve efficient sintering of the Ag NCs within a second, without damaging the PDMS matrix. This leads to significant improvement in the sensor sensitivity. Our strain sensors are highly stretchable (maximum strain = 80%) and sensitive (gauge factor = 7.1) with high mechanical stability over 10 000 stretching cycles under 50% strain. For practical demonstration, the fabrication of a smart glove for detecting the motions of fingers and a sports band for measuring the applied arm strength is also presented. This study provides an effective method for fabricating elastomer-based high-performance stretchable electronics.

Flexible crossbar-structured resistive memory arrays on plastic substrates via inorganic-based laser lift-off.

Crossbar-structured memory comprising 32 × 32 arrays with one selector-one resistor (1S-1R) components are initially fabricated on a rigid substrate. They are transferred without mechanical damage via an inorganic-based laser lift-off (ILLO) process as a result of laser-material interaction. Addressing tests of the transferred memory arrays are successfully performed to verify mitigation of cross-talk on a plastic substrate.

Safety and cost-effectiveness of bridge therapies for invasive dental procedures in patients with mechanical heart valves.

PURPOSE: Bridge anticoagulation therapy is mostly utilized in patients with mechanical heart valves (MHV) receiving warfarin therapy during invasive dental procedures because of the risk of excessive bleeding related to highly vascular supporting dental structures. Bridge therapy using low molecular weight heparin may be an attractive option for invasive dental procedures; however, its safety and cost-effectiveness compared with unfractionated heparin (UFH) is uncertain. MATERIALS AND METHODS: This study investigated the safety and cost-effectiveness of enoxaparin in comparison to UFH for bridge therapy in 165 consecutive patients (57±11 years, 35% men) with MHV who underwent invasive dental procedures. RESULTS: This study included 75 patients treated with UFH-based bridge therapy (45%) and 90 patients treated with enoxaparin-based bridge therapy (55%). The bleeding risk of dental procedures and the incidence of clinical adverse outcomes were not significantly different between the UFH group and the enoxaparin group. However, total medical costs were significantly lower in the enoxaparin group than in the UFH group (p<0.001). After multivariate adjustment, old age (≥65 years) was significantly associated with an increased risk of total bleeding independent of bridging methods (odds ratio, 2.51; 95% confidence interval, 1.15-5.48; p=0.022). Enoxaparin-based bridge therapy (ß=-0.694, p<0.001) and major bleeding (ß=0.296, p=0.045) were significantly associated with the medical costs within 30 days after dental procedures. CONCLUSION: Considering the benefit of enoxaparin in cost-effectiveness, enoxaparin may be more efficient than UFH for bridge therapy in patients with MHV who required invasive dental procedures.

Highly-efficient, flexible piezoelectric PZT thin film nanogenerator on plastic substrates.

A highly-efficient, flexible piezoelectric PZT thin film nanogenerator is demonstrated using a laser lift-off (LLO) process. The PZT thin film nanogenerator harvests the highest output performance of ∼200 V and ∼150 µA·cm(-2) from regular bending motions. Furthermore, power sources generated from a PZT thin film nanogenerator, driven by slight human finger bending motions, successfully operate over 100 LEDs.

Elucidating interactions and conductivity of newly synthesised low bandgap polymer with protic and aprotic ionic liquids.

In this paper, we have examined the conductivity and interaction studies of ammonium and imidazolium based ionic liquids (ILs) with the newly synthesised low bandgap polymer (Poly(2-heptadecyl-4-vinylthieno[3,4-d]thiazole) (PHVTT)). Use of low bandgap polymers is the most suitable way to harvest a broader spectrum of solar radiations for solar cells. But, still there is lack of most efficient low bandgap polymer. In order to solve this problem, we have synthesised a new low bandgap polymer and investigated its interaction with the ILs to enhance its conductivity. ILs may undergo almost unlimited structural variations; these structural variations have attracted extensive attention in polymer studies. The aim of present work is to illustrate the state of art progress of implementing the interaction of ILs (protic and aprotic ILs) with newly synthesised low bandgap polymer. In addition to this, our UV-Vis spectroscopy, confocal Raman spectroscopy and FT-IR spectroscopy results have revealed that all studied ILs (tributylmethylammonium methyl sulfate ([N1444][MeSO4] from ammonium family) and 1-methylimidazolium chloride ([Mim]Cl, and 1-butyl-3-methylimidazolium chloride ([Bmim]Cl from imidazolium family) have potential to interact with polymer. Our semi empirical calculation with help of Hyperchem 7 shows that protic IL ([Mim]Cl) interacts strongly with the low bandgap polymer through the H-bonding. Further, protic ILs shows enhanced conductivity than aprotic ILs in association with low bandgap polymer. This study provides the combined effect of low bandgap polymer and ILs that may generate many theoretical and experimental opportunities.