Soft, thin skin-mounted power management systems and their use in wireless thermography.

Power supply represents a critical challenge in the development of body-integrated electronic technologies. Although recent research establishes an impressive variety of options in energy storage (batteries and supercapacitors) and generation (triboelectric, piezoelectric, thermoelectric, and photovoltaic devices), the modest electrical performance and/or the absence of soft, biocompatible mechanical properties limit their practical use. The results presented here form the basis of soft, skin-compatible means for efficient photovoltaic generation and high-capacity storage of electrical power using dual-junction, compound semiconductor solar cells and chip-scale, rechargeable lithium-ion batteries, respectively. Miniaturized components, deformable interconnects, optimized array layouts, and dual-composition elastomer substrates, superstrates, and encapsulation layers represent key features. Systematic studies of the materials and mechanics identify optimized designs, including unusual configurations that exploit a folded, multilayer construct to improve the functional density without adversely affecting the soft, stretchable characteristics. System-level examples exploit such technologies in fully wireless sensors for precision skin thermography, with capabilities in continuous data logging and local processing, validated through demonstrations on volunteer subjects in various realistic scenarios.

Improving the Three-Dimensional Printability of Potato Starch Loaded onto Food Ink.

This study focuses on improving the 3D printability of pea protein with the help of food inks designed for jet-type 3D printers. Initially, the food ink base was formulated using nanocellulose-alginate with a gradient of native potato starch and its 3D printability was evaluated. The 3D-printed structures using only candidates for the food ink base formulated with or without potato starch exhibited dimensional accuracy exceeding 95% on both the X and Y axes. However, the accuracy of stacking on the Z-axis was significantly affected by the ink composition. Food ink with 1% potato starch closely matched the CAD design, with an accuracy of approximately 99% on the Z-axis. Potato starch enhanced the stacking of 3D-printed structures by improving the electrostatic repulsion, viscoelasticity, and thixotropic behavior of the food ink base. The 3D printability of pea protein was evaluated using the selected food ink base, showing a 46% improvement in dimensional accuracy on the Z-axis compared to the control group printed with a food ink base lacking potato starch. These findings suggest that starch can serve as an additive support for high-resolution 3D jet-type printing of food ink material.

Prediction of maxillary canine impaction using eruption pathway and angular measurement on panoramic radiographs.

OBJECTIVES: To compare the normal eruption pattern and angulation in impacted maxillary canines using panoramic radiographs to predict maxillary canine impaction. MATERIALS AND METHODS: Patients aged 6 to 15 years were classified into the normal eruption group (n = 229) and the impaction group (n = 191). At least two panoramic radiographs were taken in the normal eruption group during the eruption process of the maxillary canine. The growth pattern of the maxillary canine was analyzed using an XY coordinate system, with the tip of the maxillary lateral incisor as the origin and the tooth's long axis as the Y-axis and measurement of the relative position of the crown tip and angulation of the maxillary canine. RESULTS: The crown tips of normally erupted maxillary canines were intensively distributed along the distal surface of the maxillary lateral incisor, while those of impacted canines were widely distributed. The angulations of the normally erupted canines increased as eruption increased along the lateral incisor and then decreased at the cervical point of the lateral incisor. The angulations of the impacted canines were scattered, with no uniform pattern. CONCLUSIONS: While using the normal eruption path of the maxillary canine and the pattern of change in angulation based on the distal surface of the maxillary lateral incisor, early intervention or regular follow-up is needed to prevent maxillary canine impaction.

Long-term follow-up of intersegmental displacement after orthognathic surgery using cone-beam computed tomographic superimposition.

OBJECTIVES: To evaluate intersegmental displacement during long-term follow-up after bilateral sagittal split osteotomy (BSSO) by mandibular body area superimposition. MATERIALS AND METHODS: Cone-beam computed tomography (CBCT) images of 23 patients ages 18-37 years with class III malocclusion before orthognathic surgery were obtained. A three-dimensional (3D) CBCT examination was performed at four stages: surgery (T0), 6 months after surgery (T1), 1 year after surgery (T2), and long-term follow-up (6.1 ± 2.1 years, T3). The CBCT datasets were superimposed on the symphyseal area and the lower part of the distal segment of the mandible between T0 and the other time points (T1, T2, and T3). The reference points (both condyle, coronoid, and sigmoid) were estimated by the CBCT analyzed program. RESULTS: The coronoid, condylion, and sigmoid showed changes within 6 months after surgery, but there was no significant change in the intersegmental displacement between 6 months and 6 years after surgery. The distances between the left and right coronoid, condylion, and sigmoid from T0 to T3 were noted. CONCLUSIONS: The change in intersegmental displacement between T0 and T3 affecting relapse after orthognathic surgery was not significantly different. This suggests that the mandible itself may have a stable morphology during the follow-up period.

Artificial Perspiration Membrane by Programmed Deformation of Thermoresponsive Hydrogels.

Thermal management is essential for living organisms and electronic devices to survive and maintain their own functions. However, developing flexible cooling devices for flexible electronics or biological systems is challenging because conventional coolers are bulky and require rigid batteries. In nature, skins help to maintain a constant body temperature by dissipating heat through perspiration. Inspired by nature, an artificial perspiration membrane that automatically regulates evaporation depending on temperature using the programmed deformation of thermoresponsive hydrogels is presented. The thermoresponsive hydrogel is patterned into pinwheel shapes and supported by a polymeric rigid frame with stable adhesion using copolymerization. Both shape of the valve and mechanical constraint of the frame allow six times larger evaporation area in the open state compared to the closed state, and the transition occurs at a fast rate (≈1 s). A stretchable membrane is selectively coated to prevent unintended evaporation through the hydrogel while allowing swelling or shrinking of the hydrogel by securing path of water. Consequently, a 30% reduction in evaporation is observed at lower temperature, resulting in regulation of the skin temperature at the thermal model of human skins. This simple, small, and flexible cooler will be useful for maintaining temperature of flexible devices.

Magnetically Actuated Degradable Microrobots for Actively Controlled Drug Release and Hyperthermia Therapy.

Microrobots facilitate targeted therapy due to their small size, minimal invasiveness, and precise wireless control. A degradable hyperthermia microrobot (DHM) with a 3D helical structure is developed, enabling actively controlled drug delivery, release, and hyperthermia therapy. The microrobot is made of poly(ethylene glycol) diacrylate (PEGDA) and pentaerythritol triacrylate (PETA) and contains magnetic Fe3 O4 nanoparticles (MNPs) and 5-fluorouracil (5-FU). Its locomotion is remotely and precisely controlled by a rotating magnetic field (RMF) generated by an electromagnetic actuation system. Drug-free DHMs reduce the viability of cancer cells by elevating the temperature under an alternating magnetic field (AMF), a hyperthermic effect. 5-FU is released from the proposed DHMs in normal-, high-burst-, and constant-release modes, controlled by the AMF. Finally, actively controlled drug release from the DHMs in normal- and high-burst-release mode results in a reduction in cell viability. The reduction in cell viability is of greater magnitude in high-burst- than in normal-release mode. In summary, biodegradable DHMs have potential for actively controlled drug release and hyperthermia therapy.

Fluorinated Bioactive Glass Nanoparticles: Enamel Demineralization Prevention and Antibacterial Effect of Orthodontic Bonding Resin.

Orthodontic treatment involving the bonding of fixed appliances to tooth surfaces can cause white spot lesions (WSLs). WSLs increase the likelihood of cavity formation and hence require preservation and prosthetic restoration. Therefore, the prevention of WSLs is of greater importance than treatment. Application of fluoride or the use of fluoride-containing mouthwash can prevent WSLs, but this requires patient cooperation and additional time and cost. Bioactive glass containing 2.5% fluoride was synthesized and mixed with the orthodontic bonding adhesive Transbond XT Low Flow (LV) at ratios of 1, 3, and 5% to prepare orthodontic adhesive samples. Scanning electron microscopy (SEM) and X-ray diffraction (XRD) were used to characterize the samples. The Vickers hardness test, bracket retention test, and adhesive remnant index (ARI) of the samples were analysed to determine their mechanical properties. To determine the biological cytotoxicity, the cell activity of the samples was evaluated using cell viability tests and the antibacterial activity was analysed using Streptococcus mutans. To evaluate the anti-demineralization effect, the sample was bonded to extracted teeth and a pH cycle test was performed. Micro computed tomography data were obtained from the bonded teeth and sample, and the anti-demineralization effect was evaluated using the ImageJ software program. The Vickers hardness of the sample was higher than that of LV and was dependent on the concentration of fluoride-containing bioactive glass (FBAG). The bracket retention test and ARI of the sample showed no significant differences from those of LV. The cell viability test showed no significant changes at 24 and 48 h after application of the sample. The fluoride ion release test indicated an ion release rate of 9.5-17.4 µg/cm2. The antibacterial activity of the experimental group containing FBAG was significantly higher than that of the LV group. The anti-demineralization test showed a concentration-dependent increase. However, the resin containing 5 mass% FBAG (FBAG5) showed a statistically-significant increase compared with LV. The orthodontic adhesive containing FBAG showed antibacterial and anti-demineralization effects, thus indicating possible WSL prevention activity.

Enamel Surface Remineralization Effect by Fluorinated Graphite and Bioactive Glass-Containing Orthodontic Bonding Resin.

All orthodontic appliances are potentially cariogenic. The plaque around the orthodontic appliance can make demineralization on tooth surface causing white spot lesion (WSL). The most effective method to prevent WSL is Fluoride appliance and gargling, but this requires patient cooperation, which consumes additional treatment time and cost. As suggested in this study, biomaterials like bioactive glass and fluorinated graphite (FGt) having antibacterial and anti-demineralization ability effective and easy to use in the clinic. To clinically use orthodontic bonding resins containing Graphite Fluoride BAG (FGtBAG), its properties, biological stability, antimicrobial activity, and remineralization effect must be verified. BAG was mixed with 2.5% FGt containing 51 to 61% fluorine. This mixture was mixed with the CharmFill Flow (CF) in the ratios of 1, 3, and 5 wt%. Microhardness and shear bond strength tests were performed to evaluate its mechanical properties. MTT (3-(4, 5-dimethyl thiazol-2-yl)-2, 5-diphenyl tetra) assay was performed for evaluating its safety. Streptococcus mutans, which is major cariogen by producing lactic acid, was evaluated for antibacterial ability of reducing WSL. In addition, x-ray images were obtained by CBCT (Cone beam computed tomography) after a pH cycle. The remineralization effect was verified in vivo and by Image J. FGtBAG did not differ significantly from CF in mechanical tests. The MTT assay found no significant differences between the groups. The antibacterial activity of FGtBAG at 24 h and 48 h was significantly higher than that of CF. The fluoride release rate tended to increase with the FGtBAG content. The pH cycle results showed that FGtBAG had higher concentration-dependent remineralization effect than CF. The results of this study suggests that orthodontic resins containing FGtBAG can prevent WSL owing to their antibacterial activity and remineralization effect.

A 3D Microscaffold Cochlear Electrode Array for Steroid Elution.

In cochlear implants, the electrode insertion trauma during surgery can cause damage residual hearing. Preserving the residual hearing is an important challenge and the localized administration of drugs, such as steroids, is one of the most promising ways, but remains a challenge. Here, a microscaffold cochlear electrode array (MiSCEA) consisting of a microfabricated flexible electrode array and a 3D microscaffold for steroid reservoir is reported. The MiSCEA without loaded drug is tested by measuring the electrically evoked auditory brainstem response of the cochlea in guinea pigs (n = 4). The scaffold is then coated with steroid (dexamethasone) encapsulated in polylactic-co-glycolic acid and the continuous release of the steroid into artificial perilymph during six weeks is monitored. The steroid-containing scaffolds are then implanted into guinea pigs (n = 4) and threshold shifts are analyzed for four weeks by measuring the acoustically evoked auditory brainstem response. The threshold shifts tend to be lower in the group implanted with the steroid-containing MiSCEAs. The feasibility of 3D MiSCEA opens up the development of potential next-generation cochlear electrode with improved steroid release dynamics into cochlea.

Effect of orthodontic forces on the osteogenic differentiation of human periodontal ligament stem cells.

The purpose of this study was to evaluate the effects of orthodontic forces (OF) on the proliferation and differentiation of human periodontal ligament stem cells (hPDLSCs). The experimental sample consisted of 6 premolars extracted from 2 patients. After application of OF for 1 month, the hPDLSCs were separated from the primary cultured PDL cells using magnetic-activated cell sorting. The cell proliferation rate was assessed using a 3-[45-dimethylthiazol-2-yl]-2,5-diphenyl tetrazolium bromide assay. The hPDLSCs were cultured in osteogenic medium, and the osteogenic differentiation was analyzed on day 7 and 14 using alkaline phosphatase staining and reverse transcription polymerase chain reaction analyses. The gene expression level of osteogenic markers and angiogenic markers were measured and normalized. The results showed that the application of OF increased the proliferation rates, the expression of osteogenic factors, and the expression of angiogenic factors of hPDLSCs. These findings suggest that OF can serve as a potent positive modulator of proliferation and osteogenic differentiation of hPDLSCs.

Enamel Anti-Demineralization Effect of Orthodontic Adhesive Containing Bioactive Glass and Graphene Oxide: An In-Vitro Study.

White spot lesions (WSLs), a side effect of orthodontic treatment, can result in reversible and unaesthetic results. Graphene oxide (GO) with a bioactive glass (BAG) mixture (BAG@GO) was added to Low-Viscosity Transbond XT (LV) in a ratio of 1, 3, and 5%. The composite's characterization and its physical and biological properties were verified with scanning electron microscopy (SEM) and X-ray diffraction (XRD); its microhardness, shear bond strength (SBS), cell viability, and adhesive remnant index (ARI) were also assessed. Efficiency in reducing WSL was evaluated using antibacterial activity of S. mutans. Anti-demineralization was analyzed using a cycle of the acid-base solution. Adhesives with 3 wt.% or 5 wt.% of BAG@GO showed significant increase in microhardness compared with LV. The sample and LV groups showed no significant differences in SBS or ARI. The cell viability test confirmed that none of the sample groups showed higher toxicity compared to the LV group. Antibacterial activity was higher in the 48-h group than in the 24 h group; the 48 h test showed that BAG@GO had a high antibacterial effect, which was more pronounced in 5 wt.% of BAG@GO. Anti-demineralization effect was higher in the BAG@GO-group than in the LV-group; the higher the BAG@GO concentration, the higher the anti-demineralization effect.

Association between brain lateralization and mixing ability of chewing side.

BACKGROUND/PURPOSE: Previous studies have suggested that functional dominance in one part of the body can be correlated with functional dominance in another part. Thus, the present research aimed to determine whether brain laterality (handedness, footedness, earedness, and eyedness) was related to mixing ability and chewing side preference. MATERIALS AND METHODS: Fifty-four volunteers who were not undergoing any form of dental treatment took part in this study. Self-defined brain laterality was determined through a questionnaire. The volunteers performed five tasks related to brain laterality, which was identified by the side used to perform three or more of the five tasks. Chewing side preference was determined by observing the main gum location on the occlusal area when volunteers chewed for 30 strokes. Mixing Ability Index (MAI) was measured by analyzing the degree of mixing of two differently colored waxes (height, 3 mm; diameter, 20 mm). Occlusion contact area was measured by taking the maximum intercuspation bite with polysiloxane. RESULTS: Thirty-nine volunteers (72%) showed significant agreement between brain dominance and chewing preference side. The association between brain dominance and MAI was not significant. The occlusal contact area of the dominant side (mean = 48.2 mm2) was significantly wider than that of the nondominant side (25.7 mm2). CONCLUSION: Brain laterality can be explained by the side of functional (preference of the hands, eyes, ears, and feet, and survey) has a positive correlation with chewing preference side. MAI between the brain dominant and nondominant sides was not significant. This shows that mastication efficiency does not differ between dominant and nondominant sides. So, this study suggests that brain dominance is correlated with chewing preference, but it does not affect efficiency of mastication.

Remineralization Property of an Orthodontic Primer Containing a Bioactive Glass with Silver and Zinc.

White spot lesions (WSLs) are irreversible damages in orthodontic treatment due to excessive etching or demineralization by microorganisms. In this study, we conducted a mechanical and cell viability test to examine the antibacterial properties of 0.2% and 1% bioactive glass (BAG) and silver-doped and zinc-doped BAGs in a primer and evaluated their clinical applicability to prevent WSLs. The microhardness statistically significantly increased in the adhesive-containing BAG, while the other samples showed no statistically significant difference compared with the control group. The shear bond strength of all samples increased compared with that of the control group. The cell viability of the control and sample groups was similar within 24 h, but decreased slightly over 48 h. All samples showed antibacterial properties. Regarding remineralization property, the group containing 0.2% of the samples showed remineralization properties compared with the control group, but was not statistically significant; further, the group containing 1% of the samples showed a significant difference compared with the control group. Among them, the orthodontic bonding primer containing 1% silver-doped BAG showed the highest remineralization property. The new orthodontic bonding primer used in this study showed an antimicrobial effect, chemical remineralization effect, and WSL prevention as well as clinically applicable properties, both physically and biologically.