Microplastics in the insular marine environment of the Southwest Indian Ocean carry a microbiome including antimicrobial resistant (AMR) bacteria: A case study from Reunion Island.

The increasing threats to ecosystems and humans from marine plastic pollution require a comprehensive assessment. We present a plastisphere case study from Reunion Island, a remote oceanic island located in the Southwest Indian Ocean, polluted by plastics. We characterized the plastic pollution on the island's coastal waters, described the associated microbiome, explored viable bacterial flora and the presence of antimicrobial resistant (AMR) bacteria. Reunion Island faces plastic pollution with up to 10,000 items/km2 in coastal water. These plastics host microbiomes dominated by Proteobacteria (80 %), including dominant genera such as Psychrobacter, Photobacterium, Pseudoalteromonas and Vibrio. Culturable microbiomes reach 107 CFU/g of microplastics, with dominance of Exiguobacterium and Pseudomonas. Plastics also carry AMR bacteria including ß-lactam resistance. Thus, Southwest Indian Ocean islands are facing serious plastic pollution. This pollution requires vigilant monitoring as it harbors a plastisphere including AMR, that threatens pristine ecosystems and potentially human health through the marine food chain.

Bioaccumulation of trace metals in the plastisphere: Awareness of environmental risk from a European perspective.

The term "Plastisphere" refers to the biofilm layer naturally formed by microorganisms attaching to plastic surfaces. This layer possesses the capability to adsorb persistent organic and inorganic pollutants, particularly trace metals, which are the focus of this research study. Immersion experiments were concurrently conducted in five locations spanning four European countries (France, Ireland, Spain, and Italy) utilising eight distinct polymers. These immersions, repeated every three months over a one-year period, aimed to evaluate the baseline bioaccumulation of 12 trace metals. The study underscores the intricate nature of metal bioaccumulation, influenced by both micro-scale factors (such as polymer composition) and macro-scale factors (including geographical site and seasonal variations). Villefranche Bay in France exhibited the lowest metals bioaccumulation, whereas Naples in Italy emerged as the site where bioaccumulation was often the highest for the considered metals. Environmental risk assessment was also conducted in the study. The lightweight nature of certain plastics allows them to be transported across significant distances in the ocean. Consequently, evaluating trace metal concentrations in the plastisphere is imperative for assessing potential environmental repercussions that plastics, along with their associated biota, may exert even in locations distant from their point of emission.

Exploring microplastic contamination in reef-associated fishes of the Tropical Atlantic.

Microplastics (MPs) are ubiquitous in marine compartments, and their transboundary distribution favours the dispersion and accumulation of particles in ecosystems. This study investigated MP contamination in four coastal fish species (Haemulon squamipinna, Chaetodon ocellatus, Syacium micrurum, and Alphestes afer) from the southwestern Tropical Atlantic. An alkaline treatment was applied to extract MPs from the digestive tracts, and a Laser Direct Infrared (LDIR) system was used to identify polymers. All species analysed were contaminated with MPs, with Alphestes afer being the most contaminated (1.45 ± 1.09 MPs individual-1; frequency of occurrence 80 %). No significant differences were found in the number and size of detected particles among species. The most common shapes were fibres and films, and polyethylene was the most abundant polymer. This study provides important baseline data on MP contamination in coastal fish species inhabiting complex habitat areas relevant for conserving marine biodiversity.

From prey to predators: Evidence of microplastic trophic transfer in tuna and large pelagic species in the southwestern Tropical Atlantic.

Plastic pollution is present in most marine environments; however, contamination in pelagic predators, including species of economic interest, is still poorly understood. This study aims to access the macro- and microplastic contamination in tuna and large pelagic species and verify whether a trophic transfer occurs from prey to tunas captured by two fleets in the Southwestern Tropical Atlantic (SWTA). We combined different methodological approaches to analyse the intake of macro- and microplastics. In addition to examining the plastics in the fish' stomachs, we investigated the contamination in the prey retrieved from the guts of predators. A low frequency of occurrence (3%) of macroplastic was detected in the tuna and large pelagic species; conversely, we observed a high frequency of microplastic in the tuna's stomachs (100%) and prey analysed (70%). We evinced the trophic transfer of microplastics by analysing the ingestion rate of particles in prey retrieved from the tuna stomachs. In the 34 analysed prey, we detected 355 microplastic particles. The most contaminated prey were cephalopods and fishes of the Bramidae family. The most frequent microplastic shapes in both prey and tuna stomachs were foams, pellets and fibres (<1 mm). A variety of polymers were identified; the most frequent were styrene-butadiene rubber (SBR), polyamide (PA), polyethylene terephthalate (PET) and polyethylene (PE). Our findings enhance scientific knowledge of how the ecological behaviour of marine species can affect microplastic intake.

Seawater copper content controls biofilm bioaccumulation and microbial community on microplastics.

The adsorption of trace metals on microplastics (MPs) is affected by the presence of surficial biofilms but their interactions are poorly understood. Here, we present the influence of Cu levels in real seawater (Toulon Bay, NW Mediterranean Sea) on microbial communities and Cu content of the resulting biofilms grown during incubation experiments on high density polyethylene. Two sets of incubation experiments were run with seawater supplied with MPs, sampled in two sites with contrasting Cu levels: Pt12 (most contaminated site) and Pt41P (less contaminated site). For each incubation experiment, 5 treatments were considered differing in Cu concentrations, ranging between 30 and 400 nM and between 6 and 60 nM, for Pt12 and Pt41p, respectively. A control experiment (filtered at 0.2 µm) was run in parallel for each incubation experiment. We observed that, at the time scale of the incubation period, both prokaryotic and eukaryotic richness and diversity were higher in the biofilms formed from the most contaminated site. In addition, we showed that Cu levels are shaping biofilm communities, evidencing co-occurrence patterns between prokaryotes and eukaryotes with diatoms playing a central role. These differences in biofilm formation were reflected in the amount of bioaccumulated Cu per dry weight of MPs, exhibiting higher values in the most contaminated site. Within this site, the increase of Cu seawater content enhanced its bioaccumulation onto MPs until reaching saturation. This study strongly suggests a striking link between seawater copper content, biofilm community shaping and the resulting Cu bioaccumulation onto MPs.

The role of mesopelagic fishes as microplastics vectors across the deep-sea layers from the Southwestern Tropical Atlantic.

Microplastics (MPs; <5 mm) are a macro issue recognised worldwide as a threat to biodiversity and ecosystems. Widely distributed in marine ecosystems, MPs have already been found in the deep-sea environment. However, there is little information on ecological mechanisms driving MP uptake by deep-sea species. For the first time, this study generates data on MP contamination in mesopelagic fishes from the Southwestern Tropical Atlantic (SWTA) to help understand the deep-sea contamination patterns. An alkaline digestion protocol was applied to extract MPs from the digestive tract of four mesopelagic fish species: Argyropelecus sladeni, Sternoptyx diaphana (Sternoptychidae), Diaphus brachycephalus, and Hygophum taaningi (Myctophidae). A total of 213 particles were recovered from 170 specimens, and MPs were found in 67% of the specimens. Fibres were the most common shape found in all species, whereas polyamide, polyethylene, and polyethylene terephthalate were the most frequent polymers. The most contaminated species was A. sladeni (93%), and the least contaminated was S. diaphana (45%). Interestingly, individuals caught in the lower mesopelagic zone (500-1000 m depth) were less contaminated with MPs than those captured in the upper mesopelagic layer (200-500 m). Our results highlight significant contamination levels and reveal the influence of mesopelagic fishes on MPs transport in the deep waters of the SWTA.

Plastic in the inferno: Microplastic contamination in deep-sea cephalopods (Vampyroteuthis infernalis and Abralia veranyi) from the southwestern Atlantic.

Microplastics are a relevant environmental concern in marine ecosystems due to their ubiquity. However, knowledge on their dispersion patterns within the ocean basin and the interaction with biota are scarce and mostly limited to surface waters. This study investigated microplastic contamination in two species of deep-sea cephalopods from the southwestern Atlantic with different ecological behaviour: the vampire squid (Vampyroteuthis infernalis) and the midwater squid (Abralia veranyi). Microplastic contaminated most of the evaluated specimens. V. infernalis showed higher levels of contamination (9.58 ± 8.25 particles individual-1; p < 0.05) than A. veranyi (2.37 ± 2.13 part. ind.-1), likely due to the feeding strategy of V. infernalis as a faecal pellets feeder. The size of extracted microplastics was inversely proportional to the depth of foraging. The microplastics were highly heterogeneous in composition (shape, colour and polymer type). Our results provide information regarding microplastic interaction with deep-sea organisms and evidence of the biological influence in the microplastic sinking mechanism.

Microplastics in a salt-wedge estuary: Vertical structure and tidal dynamics.

The abundance and distribution of microplastics in estuaries have been barely documented, and generally without accounting for the vertical structure in the water column. This study presents the very first data on the occurrence and distribution of microplastics in the Adour Estuary, SW France. The experimental data set was complemented by numerical simulations to gain understanding of the behaviour of suspended microplastics. Microplastics were found throughout the water column with a mean abundance of 1.13 part/m3. Films and fragments were the most abundant types of particles collected. Numerical simulations demonstrated that vertical distribution of microplastics in the water column is highly dependent on particle characteristics and on the local hydrodynamics. The main trend is that neutrally-buoyant microplastics are easily flushed out while heavier microplastics are prone to entrapment in the estuary, in particular under low discharge conditions. The present study suggest that estuaries could be a sink of microplastics.

Microplastics in seawater: sampling strategies, laboratory methodologies, and identification techniques applied to port environment.

The European Interreg Italy-France 2014-2020 Maritime Project SPlasH! (Stop to Plastics in H2O!) focused on the study of microplastics (MPs) in the marine port environment to evaluate their presence, abundance, and mechanisms of diffusion to the open sea. In the framework of this project, a worldwide review of 74 studies was carried out, providing an overview of MP investigation techniques, focusing on sampling strategies, laboratory methodologies, and identification of MPs collected in seawater, and specifically evaluating their applicability to the marine port environment. Nets were the most commonly used device for MP surface sampling, but their use can be difficult in narrow spaces within the port basins, and they must be coupled to discrete sampling devices to cover all port basins. In the laboratory, density separation (NaCl, ZnCl2, NaI, sodium lauryl sulfate (SLS)), filtration (polycarbonate, polyamide, glass, cellulose, ANOPORE inorganic membrane filters), sieving, visual sorting, and digestion methods (acidic, enzymatic, alkaline, oxidative) were used to separate MPs from seawater. Digestion becomes essential with water samples with great inorganic and organic loads as deriving from a port. Although many studies are based only on visual MP identification under a microscope, analytical identification techniques unequivocally determine the particle nature and the identity of the plastic polymers and are necessary to validate the visual sorting of MPs. Fourier-transform infrared spectroscopy (FTIR) is the most used analytical identification technique.