Platelet Adhesion and Activation on Chiral Surfaces: The Influence of Protein Adsorption.

Adsorbed proteins and their conformational change on blood-contacting biomaterials will determine their final hemocompatibility. It has frequently been reported that surface chirality of biomaterials may highly influence their protein adsorption behavior. Here, lysine and tartaric acid with different chirality were immobilized onto TiO2 films respectively, and the influence of surface chirality on protein adsorption, platelet adhesion, and activation was also investigated. It showed that the l- and d-molecule grafted samples had almost the same grafting density, surface topography, chemical components, and hydrophilicity in this study. However, biological behaviors such as protein adsorption, platelet adhesion, and activation were quite different. The d-lysine grafted surface had a greater ability to inhibit both bovine serum albumin and fibrinogen adsorption, along with less degeneration of fibrinogen compared to the l-lysine anchored surface. However, the d-tartaric acid grafted surface adsorbed more protein but with less denatured fibrinogen compared to the l-tartaric acid grafted one. Further studies showed that the secondary structural change of the adsorbed albumin and fibrinogen on all surfaces with deduction of the α-helix content and increase of disordered structure, while the changing degree was apparently varied. As a result, the d-lysine immobilized surface absorbed less platelets and red blood cells and achieved slightly increased platelet activation. For tartaric acid anchored surfaces, a larger number of platelets adhered to the D-surface but were less activated compared to the L-surface. In conclusion, the surface chirality significantly influenced the adsorption and conformational change of blood plasma protein, which in turn influenced both platelet adhesion and activation.

Constructing bio-layer of heparin and type IV collagen on titanium surface for improving its endothelialization and blood compatibility.

The modification of cardiovascular stent surface for a better micro-environment has gradually changed to multi-molecule, multi-functional designation. In this study, heparin (Hep) and type IV collagen (IVCol) were used as the functional molecule to construct a bifunctional micro-environment of anticoagulation and promoting endothelialization on titanium (Ti). The surface characterization results (AFM, Alcian Blue 8GX Staining and fluorescence staining of IVCol) indicated that the bio-layer of Hep and IVCol were successfully fabricated on the Ti surface through electrostatic self-assembly. The APTT and platelet adhesion test demonstrated that the bionic layer possessed better blood compatibility compared with Ti surface. The adhesion, proliferation, migration and apoptosis tests of endothelial cells proved that the Hep/IVCol layer was able to enhance the endothelialization of the Ti surface. The in vivo animal implantation results manifested that the bionic surface could encourage new endothelialization. This work provides an important reference for the construction of multifunction micro-environment on the cardiovascular scaffold surface.

Hydrogel-coated needles prevent puncture site bleeding in arteriovenous fistula and arteriovenous grafts in rats.

INTRODUCTION: Imperfect hemostasis after arteriovenous fistula (AVF) and arteriovenous graft (AVG) cannulation can cause a hematoma or pseudoaneurysm and leads to poor satisfaction. We hypothesized that a hydrogel-coated needle would effectively and rapidly stop bleeding after vascular cannulation in a rat AVF and AVG model. METHOD: A hydrogel comprised of sodium alginate (SA), hyaluronic acid (HA), and calcium carbonate was coated onto the surface of suture needles using a rotating system. The needles were observed using scanning electron microscopy (SEM) and immunofluorescence. Rat AVF with or without renal failure and AVG were punctured using bare and hydrogel-coated needles. The tissues were examined by histology. RESULT: The hydrogel was successfully coated onto the surface of 30 G needles and confirmed by SEM. Hydrogel-coated needles rapidly stopped bleeding after AVF and AVG cannulation in rat. CONCLUSION: In this preliminary animal research, hydrogel-coated needles can stop AVF and AVG puncture-site bleeding; but additional clinical studies are needed to justify whether it is still effective in clinical.

Enhancing biocompatibility and corrosion resistance of biodegradable Mg-Zn-Y-Nd alloy by preparing PDA/HA coating for potential application of cardiovascular biomaterials.

In this paper the poly-dopamine (PDA)/hyaluronic acid (HA) coatings with different HA molecular weight (MW, 4 × 103, 1 × 105, 5 × 105 and 1 × 106 Da) were prepared onto the NaOH passivated Mg-Zn-Y-Nd alloy aiming at potential application of cardiovascular implants. The characterization of weight loss, polarization curves and surface morphology indicated that the coatings with HA MW of 1 × 105 (PDA/HA-2) and 1 × 106 Da (PDA/HA-4) significantly enhanced the corrosion resistance of Mg-Zn-Y-Nd. In vitro biological test also suggested better hemocompatibility, pro-endothelialization, anti-hyperplasia and anti-inflammation functions of the PDA/HA-2- and PDA/HA-4-coated Mg-Zn-Y-Nd alloy. Nevertheless, the in vivo implantation of SD rats' celiac artery demonstrated that the PDA/HA-2 had preferable corrosion resistance and biocompatibility.

Tailoring of cardiovascular stent material surface by immobilizing exosomes for better pro-endothelialization function.

Stent intervention as available method in clinic has been widely applied for cardiovascular disease treatment for decades. However, the restenosis caused by late thrombosis and hyperplasia still limits the stents long-term application, and the essential cause is usually recognized as endothelial functionalization insufficiency of the stent material surface. Here, we address this limitation by developing a pro-endothelial-functionalization surface that immobilized a natural factors-loaded nanoparticle, exosome, onto the poly-dopamine (PDA) coated materials via electrostatic binding. This PDA/Exosome surface not only increased the endothelial cells number on the materials, but also improved their endothelial function, including platelet endothelial cell adhesion molecule-1 (CD31) expression, cell migration and nitric oxide release. The pro-inflammation macrophage (M1 phenotype) attachment and synthetic smooth muscle cell proliferation as the interference factors for the endothelialization were not only inhibited by the PDA/Exosome coating, while the cells were also regulated to anti-inflammation macrophage (M2 phenotype) and contractile smooth muscle cell, which may contribute to endothelialization. Thus, it can be summarized this method has potential application on surface modification of cardiovascular biomaterials.

Effects of degradation products of biomedical magnesium alloys on nitric oxide release from vascular endothelial cells.

Nitric oxide (NO) released by vascular endothelial cells (VECs), as a functional factor and signal pathway molecule, plays an important role in regulating vasodilation, inhibiting thrombosis, proliferation and inflammation. Therefore, numerous researches have reported the relationship between the NO level in VECs and the cardiovascular biomaterials' structure/functions. In recent years, biomedical magnesium (Mg) alloys have been widely studied and rapidly developed in the cardiovascular stent field for their biodegradable absorption property. However, influence of the Mg alloys' degradation products on VEC NO release is still unclear. In this work, Mg-Zn-Y-Nd, an Mg alloy widely applied on the biodegradable stent research, was investigated on the influence of the degradation time, the concentration and reaction time of degradation products on VEC NO release. The data showed that the degradation product concentration and the reaction time of degradation products had positive correlation with NO release, and the degradation time had negative correlation with NO release. All these influencing factors were controlled by the Mg alloy degradation behaviors. It was anticipated that it might make sense for the cardiovascular Mg alloy design aiming at VEC NO release and therapy.

Surface modification of implanted cardiovascular metal stents: from antithrombosis and antirestenosis to endothelialization.

Driven by the complications occurring with bare metal stents and drug-eluting stents, concerns have been raised over strategies for long-term safety, with respect to preventing or inhibiting stent thrombosis, restenosis, and in-stent restenosis in particularly. Surface modification is very important in constructing a buffer layer at the interface of the organic and inorganic materials and in ultimately obtaining long-term biocompatibility. In this review, we summarize the developments in surface modification of implanted cardiovascular metal stents. This review focuses on the modification of metal stents via coating drugs or biomolecules to enhance antithrombosis, antirestenosis, and/or endothelialization. In addition, we indicate the probable future work involving the modification of the metallic blood-contacting surfaces of stents and other cardiovascular devices that are under development.

The endothelialization and hemocompatibility of the functional multilayer on titanium surface constructed with type IV collagen and heparin.

The type IV collagen/heparin (IVCol/Hep) multilayer was developed on amino-silanized titanium (Ti) surface layer by layer self-assembly. Ti, TiOH, TiOHA and TiOHA(HC)3H were characterized by Fourier transform infrared spectroscopy (FTIR), water contact angle measurements and scanning electron microscopy (SEM), respectively. Alcian Blue 8GX staining and immunofluorescence staining were used to characterize the heparin (Hep) and type IV collagen (IVCol), respectively. The blood compatibilities of Ti and the treated Ti were evaluated by platelet adhesion test and clotting time using PRP. Blood compatibility tests reveal that the assembled functional multilayer displayed less platelets adhesion and prolonged APTTs time compared with the controlled Ti. Endothelial cells (ECs) culture results showed more attached and proliferated ECs on the TiOHA(HC)3H than that on Ti, especially compared with that on TiOH and TiOHA. Thus, the assembled Hep and IVCol multilayer can improve the cell compatibility and the blood compatibility. We anticipate that this IVCol/Hep functional multilayer will be beneficial to enhance the biocompatibility of the Ti-based biomaterial devices.