Preparation of branched polyethyleneimine-assisted boronic acid-functionalized magnetic MXene for the enrichment of catecholamines in urine samples.

Herein, a magnetic borate-functionalized MXene composite with multiple boronic affinity sites was fabricated by embedding Fe3 O4 nanoparticles with 4-formylphenylboronic acid functionalized Ti3 C2 Tx nanosheets and served as sorbent for the simultaneous extraction of catecholamines (CAs) in urine samples. The morphology and structure of the magnetic materials were investigated using scanning microscopy, vibrating sample magnetometer, X-ray photoelectron spectrometer, and X-ray diffraction. The introduction of polyethyleneimine can amplify the bonded boronic acid groups, thereby effectively improving the adsorption capacities for CAs based on the multiple interactions of boronic affinity, hydrogen bonding, and metal coordination. The adsorption performance was investigated using the kinetics and isotherms models, and the main parameters that influence the extraction efficiency were optimized. Under the most favorable magnetic solid-phase extraction condition, a sensitive method for the analysis of CAs in urine samples was developed by combining magnetic solid-phase extraction conditions with high-performance liquid chromatography detection. The findings illustrated that the proposed approach possessed a wide linearity range of 0.05-250 ng/mL with an acceptable correlation coefficient (R2  ≥ 0.9984) and detection limits of 0.010-0.015 ng/mL for the target CAs. The research not only provides a notable composite with multiple boronic affinity sites but also offers an effective and feasible measure for the detection of CAs in biological samples.

Boric Acid Functionalized Hypercrosslinked Polymers for Selective Extraction of Trace Catecholamines and Their Metabolites in Rat Serum.

Abnormal levels of catecholamine (CA) neurotransmitters and their metabolites in biological fluids can lead to various neurological disorders. Herein, a boric acid-functionalized hypercrosslinked polymer was prepared and utilized as a sorbent for the dispersive solid-phase extraction of CAs and their metabolites in rat serum. By combination with a high-performance liquid chromatography-fluorescence detector, the extraction parameters for the seven target analytes were optimized. Under the optimal extraction condition, the methodology for the quantitative analysis of CAs and their metabolites in rat serum samples was established. The limits of detection and limits of quantification were found to be in the ranges of 0.010-0.015 and 0.033-0.050 ng/mL, respectively. The results demonstrated satisfactory recoveries, with values ranging from 88.02% to 113.27%, accompanied by relative standard deviations within the range of 2.69%-9.59%. In addition, the method showed good anti-interference ability (matrix effect ranged from 2.64% to 18.07%). The developed method was validated for the determination of CAs and their metabolites in normal and Alzheimer's disease model rats' serum, which proved the promising application of the method for CAs neurotransmitter analysis in biological samples.

Dispersive solid-phase extraction of alkaloids and polyphenols using borate hypercrosslinked polymers.

In this study, a borate hyper-crosslinked polymer was synthesized by crosslinking 1-naphthalene boric acid and dimethoxymethane via the Friedel-Crafts reaction. The prepared polymer exhibits excellent adsorption performance toward alkaloids and polyphenols with maximum adsorption capacities ranging from 25.07 to 39.60 mg/g. Adsorption kinetics and isotherms model results indicated the adsorption was a monolayer and chemical process. Under the optimal extraction conditions, a sensitive method was established for the simultaneous quantification of alkaloids and polyphenols in green tea and Coptis chinensis by coupling with the proposed sorbent and ultra-high performance liquid chromatography detection. The proposed method exhibited a wide linear range of 5.0-5000.0 ng/ml with R2 ≥ 0.99, a low limit of detection (0.66-11.25 ng/ml), and satisfactory recoveries (81.2%-117.4%). This work provides a simple and convenient candidate for the sensitive determination of alkaloids and polyphenols in green tea and complex herbal products.

Development of a reverse transcription recombinase-aided amplification assay for the detection of coxsackievirus A10 and coxsackievirus A6 RNA.

Hand, foot and mouth disease (HFMD) is a serious public health problem, and coxsackievirus A6 (CVA6) and coxsackievirus A10 (CVA10) are two of the major causative pathogens, in addition to enterovirus 71 (EV71) and coxsackievirus A16 (CVA16). A simple and rapid reverse transcription recombinase-aided amplification assay (RT-RAA) was developed for the detection of CVA10 and CVA6 in this study. The analytical sensitivity for detection of CVA10 and CVA6 at 95% probability by probit regression analysis was 35 copies per reaction and 38 copies per reaction, respectively, with 100% specificity. Compared with commercial RT-qPCR assays, when testing 455 fecal specimens, the kappa value of the RT-RAA assay for CVA10 and CVA6 was 0.920 (p < 0.001) and 0.952 (p < 0.001), respectively. Moreover, four samples that were positive for CVA10 and five that were positive for CVA6 by RT-RAA but negative by RT-qPCR were further determined to be true positives. These results demonstrate that the proposed RT-RAA assays are very valuable tools for the detection of CVA10 and CVA6 and have potential for use in resource-limited settings.

Anti-Mitotic Spindle Apparatus Antoantibodies: Prevalence and Disease Association in Chinese Population.

BACKGROUND: Mitotic spindle apparatus (MSA) antibodies are rare findings with undefined clinical significance in clinical research. We aimed at investigating the prevalence and clinical significance of anti-MSA antibodies in Chinese population. METHODS: Between 2008 and 2013, a total of 180,180 patients were studied for the presence of anti-MSA antibodies. The clinical details and laboratory data of anti-MSA-positive patients were retrospectively collected and analyzed. RESULTS: Of the 180,180 patients tested, 68,640 patients presented with positive antinuclear antibodies (ANAs, 38.10%), but only 32 patients with positive anti-MSA antibodies (0.018%). Diagnoses were established in 22 of 32 patients: 16 connective tissue diseases (CTDs), mainly Sjogren syndrome (SS, 5/16), rheumatoid arthritis (RA, 4/16), and systemic lupus erythematosus (SLE, 3/16), and 6 nonautoimmune conditions. The most frequent clinical symptoms of the anti-MSA-positive patients were arthralgia and eyes and mouth drying. Additionally, 70% of anti-MSA antibodies were not associated with other ANAs, however, when associated, the most frequent ANA was anti-SSA. CONCLUSIONS: Anti-MSA antibodies have a low prevalence and female gender predominance. Anti-MSA antibodies are primarily associated with CTDs, mainly SS, RA, and SLE. The presence of anti-MSA antibodies might be the unique serological markers of the CTDs, especially when anti-SSA, SSB, and dsDNA antibodies are negative, or the level of RF is low.

Simultaneous extraction of hydroxylated polycyclic aromatic hydrocarbons and catecholamines with magnetic boronic acid hypercrosslinked polymers.

Urinary hydroxylated polycyclic aromatic hydrocarbons (OH-PAHs) and catecholamines (CAs) are important biomarkers of PAHs exposure. In this study, a novel magnetic boronic acid hypercrosslinked composite (Fe3O4@HCP-BA) is synthesized using a facile one-pot strategy and applied as a sorbent for the simultaneous extraction of OH-PAHs and CAs in urine samples. The synthesized Fe3O4@HCP-BA composites are characterized by rich pore structure, highly specific surface area, good magnetic response, and excellent selectivity and adsorption efficiency (range: 65.26-496.71 and 1227.3-1581.8 µmol g-1 for CAs and OH-PAHs, respectively). The mechanisms governing the adsorption of the OH-PAHs and CAs to the Fe3O4@HCP-BA composites were systematically studied via adsorption kinetics, isotherm models, XPS characterization, and molecular simulation. The resultant Fe3O4@HCP-BA composite-based MSPE/HPLC-FLD method exhibited good linearity (R2 > 0.9916), low limits of detection (0.2-0.3 pg mL-1 and 0.2-0.3 ng mL-1 for OH-PAHs and CAs, respectively), and good precision (intra-day and inter-day RSDs < 11.1%). The analysis of CAs and OH-PAHs in the urine samples from 14 smokers and 14 non-smokers revealed a positive correlation between the concentrations of CAs and OH-PAHs. Our findings not only establish the proposed method as a green, environmentally friendly, and simple strategy for preparing magnetic adsorbents, but also confirm it as a promising alternative method for accurate determination of OH-PAHs and CAs in biological samples.

Dispersive solid-phase extraction of non-steroidal anti-inflammatory drugs in water and urine samples using a magnetic ionic liquid hypercrosslinked polymer composite.

In this work, Friedel-Crafts alkylation was successfully applied to prepare a magnetic ionic liquid hypercrosslinked polymer composite (Fe3O4@IL-HCP), which was subsequently employed as magnetic solid-phase extraction (MSPE) adsorbent for the isolation and enrichment of trace non-steroidal anti-inflammatory drugs (NSAIDs). The developed composite was comprehensively characterized using various techniques, with the results indicating that it possessed high saturation magnetization (39.44 em g - 1), large specific surface area (175 m2g - 1), and high adsorption capacity for NSAIDs. The adsorption behavior and mechanisms were also investigated in detail. NSAIDs were adsorbed onto the Fe3O4@IL-HCP sorbent via a heterogeneous multilayer process consisting of hydrogen bonding and π-π and electrostatic interactions. Additionally, the composite's large surface area and multiple active sites enabled extraction equilibrium within 6 min. By coupling with high performance liquid chromatography (HPLC), the developed MSPE/HPLC method was applied for the determination of selected NSAIDs in water and urine samples. The developed method displayed wide linear ranges, low limits of detection (0.12-0.30 ng mL-1 and 0.15-1.5 ng mL-1 in water and urine samples, respectively), sufficient recoveries (92.8-109%), and good precision (relative standard deviations ≤ 4.6%). Thus, the findings of this work provide an appealing alternative for the extraction and determination of trace NSAIDs in environmental water and biological samples.

Orthodontic treatment combined with 3D printing guide plate implant restoration for edentulism and its influence on mastication and phonic function.

BACKGROUND: Dentition defect, a common clinical oral disease developed in humans, not only causes masticatory dysfunction and articulation difficulties but also affects facial appearance and increases the burden on the intestinal tract. Restorative treatment is the primary option for this disease. However, traditional restorations have many drawbacks, such as mismatch with the body, low reliability, and incomplete occlusal function recovery. AIM: to analyze the efficacy of orthodontics combined with 3D printing guide plate implant restoration in treating patients with dentition defects and its influence on masticatory and phonic functions. METHODS: A prospective study was carried out in 86 patients with dentition defects who received implant prosthesis after orthodontic treatment in our hospital between January 2018 and January 2019. Those patients were divided into a control group and an intervention group with 43 patients in each group using a random number table. The control group received traditional implant restoration, whereas the intervention group received 3D printing guide plate implant restoration. Treatment outcomes, cosmetic appearance, dental function, implant deviation, and quality of life were compared between the two groups. RESULTS: The overall response rate in the intervention group was significantly higher than that in the control group (95.35% vs 81.40%, χ 2 = 4.071, P = 0.044). The number of cases with neatly trimmed cosmetic appearance (χ 2 = 4.497, P = 0.034), complete coverage (χ 2 = 4.170, P = 0.041), and normal occlusion (χ 2 = 5.512, P = 0.019) in the intervention group was higher than that in the control group. After treatment, mastication, swallowing, and articulation were significantly improved in both groups. Masticatory (t = 2.980, P = 0.004), swallowing (t = 2.199, P = 0.031), and phonic functions (t = 3.950, P = 0.004) were better in the intervention group than those in the control group. The deviation value and the deviation angle (t = 5.440, P = 0.000) at the top (t = 6.320, P = 0.000) and middle parts of the implants (t = 22.295, P = 0.000) in the intervention group were lower than those in the control group after treatment. Functional limitations, psychosocial and physical pain and discomfort, and total scores decreased in both groups. The functional limitation (t = 2.379, P = 0.020), psychosocial (t = 2.420, P = 0.000), physical pain and discomfort (t = 6.581, P = 0.000), and total scores (t = 2.140, P = 0.035) were lower in the intervention group than those in the control group. CONCLUSION: Orthodontic treatment combined with 3D printing guide plate implant restoration can significantly improve the masticatory and phonic functions, quality of life, and psychological health of patients with dentition defects. Therefore, it is highly recommended in clinic application.

Enhance pore structure of cyanobacteria-based porous carbon by polypropylene to improve adsorption capacity of methylene blue.

Porous carbon obtained by co-pyrolysis of plastic and biomass has received a lot of attention due to its excellent adsorption properties, and the pore structure plays an essential role in adsorption performance, however, the pore structure is still not well understood. Herein, we synthesized cyanobacteria-based porous carbon derived from cyanobacteria and polypropylene plastic by one-step method. CPC-800-30% exhibited a high BET surface area (2140 m2/g), pore volume up to 1.44 cm3/g. PP not only improved the pore structure of porous carbon, but also enriched the types of functional groups, such as O-H, N-H, C=O, and -CH, due to dehydroxylation or amino group decreased, resulting in the hydrogen radicals increased, hence PP had positive effect for biomass during co-pyrolysis. Meanwhile, CPC-800-30% showed excellent methylene blue (MB) adsorption capacity (667 mg/g). This work provided a new strategy for enhancing porous carbon structure via using PP as additive.