Phthalates Promote Dissemination of Antibiotic Resistance Genes: An Overlooked Environmental Risk.

Plastics-microorganism interactions have aroused growing environmental and ecological concerns. However, previous studies concentrated mainly on the direct interactions and paid little attention to the ecotoxicology effects of phthalates (PAEs), a common plastic additive that is continuously released and accumulates in the environment. Here, we provide insights into the impacts of PAEs on the dissemination of antibiotic resistance genes (ARGs) among environmental microorganisms. Dimethyl phthalate (DMP, a model PAE) at environmentally relevant concentrations (2-50 µg/L) significantly boosted the plasmid-mediated conjugation transfer of ARGs among intrageneric, intergeneric, and wastewater microbiota by up to 3.82, 4.96, and 4.77 times, respectively. The experimental and molecular dynamics simulation results unveil a strong interaction between the DMP molecules and phosphatidylcholine bilayer of the cell membrane, which lowers the membrane lipid fluidity and increases the membrane permeability to favor transfer of ARGs. In addition, the increased reactive oxygen species generation and conjugation-associated gene overexpression under DMP stress also contribute to the increased gene transfer. This study provides fundamental knowledge of the PAE-bacteria interactions to broaden our understanding of the environmental and ecological risks of plastics, especially in niches with colonized microbes, and to guide the control of ARG environmental spreading.

Fluorescence Sensor Based on Biosynthetic CdSe/CdS Quantum Dots and Liposome Carrier Signal Amplification for Mercury Detection.

Mercury (Hg), as a highly harmful environmental pollutant, poses severe ecological and health risks even at low concentrations. Accurate and sensitive methods for detecting Hg2+ ions in aquatic environments are highly needed. In this work, we developed a highly sensitive fluorescence sensor for Hg2+ detection with an integrated use of biosynthetic CdSe/CdS quantum dots (QDs) and liposome carrier signal amplification. To construct such a sensor, three single-stranded DNA probes were rationally designed based on the thymine-Hg2+-thymine (T-Hg2+-T) coordination chemical principles and by taking advantage of the biocompatibility and facile-modification properties of the biosynthetic QDs. Hg2+ could be determined in a range from 0.25 to 100 nM with a detection limit of 0.01 nM, which met the requirements of environmental sample detection. The sensor also exhibited a high selectivity for Hg2+ detection in the presence of other high-level metal ions. A satisfactory capacity of the sensor for detecting environmental samples including tap water, river water, and landfill leachate was also demonstrated. This work opens up a new application scenario for biosynthetic QDs and holds a great potential for environmental monitoring applications.

Fabrication of mesoporous lignin-based biosorbent from rice straw and its application for heavy-metal-ion removal.

Lignocellulosic biomass offers the most abundant renewable resource in replacing traditional fossil resources. However, it is still a major challenge to directly convert the lignin component into value-added materials. The availability of plentiful hydroxyl groups in lignin macromolecules and its unique three-dimensional structure make it an ideal precursor for mesoporous biosorbents. In this work, we reported an environmentally friendly and economically feasible method for the fabrication of mesoporous lignin-based biosorbent (MLBB) from lignocellulosic biomass through a SO3 micro-thermal-explosion process, as a byproduct of microcrystalline cellulose. BET analysis reveal the average pore-size distribution of 5.50nm, the average pore value of 0.35cm3/g, and the specific surface area of 186m2/g. The physicochemical properties of MLBB were studied by fourier transform infrared spectroscopy (FTIR), attenuated-total-reflection fourier transform infrared spectroscopy (ATR-FTIR), X-ray photoelectron spectroscopy (XPS), and element analysis. These results showed that there are large amounts of sulfonic functional groups existing on the surface of this biosorbent. Pb(II) was used as a model heavy-metal-ion to demonstrate the technical feasibility for heavy-metal-ion removal. Considering that lignocellulosic biomass is a naturally abundant and renewable resource and SO3 micro-thermal-explosion is a proven technique, this biosorbent can be easily produced at large scale and become a sustainable and reliable resource for wastewater treatment.

Coagulation/co-catalytic membrane integrated system for fouling-resistant and efficient water purification.

Low-pressure catalytic membranes allow efficient rejection of particulates and simultaneously removing organics pollutant in water, but the accumulation of dissolved organic matters (DOM) on membrane surface, which cover the catalytic sites and cause membrane fouling, challenges their stable operation in practical wastewater treatment. Here we propose a ferric salt-based coagulation/co-catalytic membrane integrated system that can effectively mitigate the detrimental effects of DOM. Ferric salt (Fe3+) serving both as a DOM coagulant to lower the membrane fouling and as a co-catalyst with the membrane-embedded MoS2 nanosheets to drive perxymonosulfate (PMS) activation and pollutant degradation. The membrane functionalized with 2H-phased MoS2 nanosheets showed improved hydrophilicity and fouling resistance relative to the blank polysulfone membrane. Attributed to the DOM coagulation and co-catalytic generation of surface-bound radicals for decontamination at membrane surface, the catalytic membrane/PMS/ Fe3+ system showed much less membrane fouling and 2.6 times higher pollutant degradation rate in wastewater treatment than the catalytic membrane alone. Our work imply a great potential of coagulation/co-catalytic membrane integrated system for water purification application.

Transcriptomic Insights into Metabolism-Dependent Biosynthesis of Bacterial Nanocellulose.

Bacterial nanocellulose (BNC) is an attractive green-synthesized biomaterial for biomedical applications and various other applications. However, effective engineering of BNC production has been limited by our poor knowledge of the related metabolic processes. In contrast to the traditional perception that genome critically determines biosynthesis behaviors, here we discover that the glucose metabolism could also drastically affect the BNC synthesis in Gluconacetobacter hansenii. The transcriptomic profiles of two model BNC-producing strains, G. hansenii ATCC 53582 and ATCC 23769, which have highly similar genomes but drastically different BNC yields, were compared. The results show that their BNC synthesis capacities were highly related to metabolic activities such as ATP synthesis, ion transport protein assembly, and carbohydrate metabolic processes, confirming an important role of metabolism-related transcriptomes in governing the BNC yield. Our findings provide insights into the microbial biosynthesis behaviors from a transcriptome perspective, potentially guiding cellular engineering for biomaterial synthesis.

Phosphorus removal in an enhanced biological phosphorus removal process: roles of extracellular polymeric substances.

Phosphorus-accumulating organisms are considered to be the key microorganisms in the enhanced biological phosphorus removal (EBPR) process. A large amount of phosphorus is found in the extracellular polymeric substances (EPS) matrix of these microorganisms. However, the roles of EPS in phosphorus removal have not been fully understood. In this study, the phosphorus in the EBPR sludge was fractionated and further analyzed using quantitative (31)P nuclear magnetic resonance spectroscopy. The amounts and forms of phosphorus in EPS as well as their changes in an anaerobic-aerobic process were also investigated. EPS could act as a reservoir for phosphorus in the anaerobic-aerobic process. About 5-9% of phosphorus in sludge was reserved in the EPS at the end of the aerobic phase and might further contribute to the phosphorus removal. The chain length of the intracellular long-chain polyphosphate (polyP) decreased in the anaerobic phase and then recovered under aerobic conditions. However, the polyP in the EPS had a much shorter chain length than the intracellular polyP in the whole cycle. The migration and transformation of various forms of phosphorus among microbial cells, EPS, and bulk liquid were also explored. On the basis of these results, a model with a consideration of the roles of EPS was proposed, which is beneficial to elucidate the mechanism of phosphorus removal in the EBPR system.

A novel integrated approach to quantitatively evaluate the efficiency of extracellular polymeric substances (EPS) extraction process.

A novel integrated approach is developed to quantitatively evaluate the extracellular polymeric substances (EPS) extraction efficiency after taking into account EPS yield, EPS damage, and cell lysis. This approach incorporates grey relational analysis and fuzzy logic analysis, in which the evaluation procedure is established on the basis of grey relational coefficients generation, membership functions construction, and fuzzy rules description. The flocculation activity and DNA content of EPS are chosen as the two evaluation responses. To verify the feasibility and effectiveness of this integrated approach, EPS from Bacillus megaterium TF10 are extracted using five different extraction methods, and their extraction efficiencies are evaluated as one real case study. Based on the evaluation results, the maximal extraction grades and corresponding optimal extraction times of the five extraction methods are ordered as EDTA, 10 h > formaldehyde + NaOH, 60 min > heating, 120 min > ultrasonication, 30 min > H2SO4, 30 min > control. The proposed approach here offers an effective tool to select appropriate EPS extraction methods and determine the optimal extraction conditions.

SMP production by activated sludge in the presence of a metabolic uncoupler, 3,3',4',5-tetrachlorosalicylanilide (TCS).

3,3',4',5-Tetrachlorosalicylanilide (TCS) is an effective metabolic uncoupler utilized for microbial yield reduction. However, its potential impact, in particular on the soluble microbial products (SMP) formation, is unknown yet. Herein we study the effect of TCS on SMP production and analyze the related mechanism. The addition of TCS in activated sludge system led to an increased production of SMP, especially proteins. The SMP were produced in proportion to the substrate utilization at a low TCS concentration, while more non-substrate-associated SMP were released at a high TCS concentration. TCS simulated the production of extracellular polymeric substances (EPS) and enhanced cell lysis, which both contributed to SMP production. FTIR and EEM analyses show that the SMP, EPS, and cell lysis products have similar functional groups and fluorescence properties, indicating a similar origin of these substances. In addition, a dose of TCS increased the release of high molecular weight compounds due to cell lysis. This study might benefit for a better understanding of the response of activated sludge to metabolic uncouplers like TCS.

Development of a novel bioelectrochemical membrane reactor for wastewater treatment.

A novel bioelectrochemical membrane reactor (BEMR), which takes advantage of a membrane bioreactor (MBR) and microbial fuel cells (MFC), is developed for wastewater treatment and energy recovery. In this system, stainless steel mesh with biofilm formed on it serves as both the cathode and the filtration material. Oxygen reduction reactions are effectively catalyzed by the microorganisms attached on the mesh. The effluent turbidity from the BEMR system was low during most of the operation period, and the chemical oxygen demand and NH(4)(+)-N removal efficiencies averaged 92.4% and 95.6%, respectively. With an increase in hydraulic retention time and a decrease in loading rate, the system performance was enhanced. In this BEMR process, a maximum power density of 4.35 W/m(3) and a current density of 18.32 A/m(3) were obtained at a hydraulic retention time of 150 min and external resister of 100 Ω. The Coulombic efficiency was 8.2%. Though the power density and current density of the BEMR system were not very high, compared with other high-output MFC systems, electricity recovery could be further enhanced through optimizing the operation conditions and BEMR configurations. Results clearly indicate that this innovative system holds great promise for efficient treatment of wastewater and energy recovery.

[The role of mitochondrial dynamics in neurodegeneration].

Mitochondria are highly dynamic organelles, which undergo continuous cycles of fission and fusion. Mitochondrial dynamics (fission and fusion) plays important roles in maintaining neuronal functions, including biogenesis, mitochondrial distribution and cell injury or death. Mfnl/2 and Opal mediate mitochondrial fusion, whereas Drp1 and Fis1 regulate mitochondrial fission. Mutations of Opal cause autosomal dominant optic atrophy, and mutations of Mfn2 lead to Charcot-Marie-Tooth disease type 2A. Moreover, increasing evidences show that abnormal mitochondrial dynamics are involved in pathogenesis of late-onset neurodegenerative disorders, such as Alzheimer's disease, Parkinson's disease and Huntington's disease. This paper reviews the current advances of abnormal mitochondrial dynamics relevant to neuronal loss in neurodegenerative diseases.

Roles of extracellular polymeric substances in enhanced biological phosphorus removal process.

Enhanced biological phosphorus removal (EBPR) process is known to mainly rely on the ability of phosphorus-accumulating organisms to take up, transform and store excess amount of phosphorus (P) inside the cells. However, recent studies have revealed considerable accumulation of P also in the extracellular polymeric substances (EPS) of sludge, implying a non-negligible role of EPS in P removal by EBPR sludge. However, the contribution of EPS to P uptake and the forms of accumulated extracellular P vary substantially in different studies, and the underlying mechanism of P transformation and transportation in EPS remains poorly understood. This review provides a new recognition into the P removal process in EBPR system by incorporating the role of EPS. It overviews on the characteristics of P accumulation in EPS, explores the mechanism of P transformation and transportation in EBPR sludge and EPS, summarizes the main influential factors for the P-accumulation properties of EPS, and discusses the remaining knowledge gaps and needed future efforts that may lead to better understanding and use of such an EPS role for maximizing P recovery from wastewater.

Development of an energy-saving anaerobic hybrid membrane bioreactors for 2-chlorophenol-contained wastewater treatment.

A novel energy-saving anaerobic hybrid membrane bioreactor (AnHMBR) with mesh filter, which takes advantage of anaerobic membrane bioreactor and fixed-bed biofilm reactor, is developed for low-strength 2-chlorophenol (2-CP)-contained wastewater treatment. In this system, the anaerobic membrane bioreactor is stuffed with granular activated carbon to construct an anaerobic hybrid fixed-bed biofilm membrane bioreactor. The effluent turbidity from the AnHMBR system was low during most of the operation period, and the chemical oxygen demand and 2-CP removal efficiencies averaged 82.3% and 92.6%, respectively. Furthermore, a low membrane fouling rate was achieved during the operation. During the AnHMBR operation, the only energy consumption was for feed pump. And a low energy demand of 0.0045-0.0063kWhm(-3) was estimated under the current operation conditions. All these results demonstrated that this novel AnHMBR is a sustainable technology for treating 2-CP-contained wastewater.

Insight into the roles of microbial extracellular polymer substances in metal biosorption.

Biosorption presents a potent technology to remediate metal-contaminated aqueous environment or even to recover precious metals. Extracellular polymeric substances (EPS) are believed to play an important role in metal biosorption by microorganisms, but the reported results have been rather contradictory and the underlying mechanisms remain largely unclear so far. This review aims to clarify why large discrepancies existed for different EPS-metal systems through systematically exploring into the adsorption mechanisms and influential factors, and to offer some implications for advancing the implementation of metal biosorption technologies. The state-of-the-art methodologies for characterizing metal-EPS binding are summarized; several interaction mechanisms, including ion exchange, complexation and surface precipitation, are analyzed; the major influential factors such as EPS composition, metal species, solution chemistry and operating conditions are discussed; and lastly future research needs to advance the investigations and implementations of such biosorption processes are proposed.

Cultivation of aerobic granules for polyhydroxybutyrate production from wastewater.

Polyhydroxybutyrate (PHB)-rich aerobic granule was cultivated in a sequencing batch reactor (SBR) under nitrogen deficient conditions by adapting a two-step strategy. In the first step the PHB-storage ability of activated sludge was enhanced by keeping both oxygen and ammonia at a low level. In the second step granular sludge was cultivated through adjusting sludge settling time. The matured PHB-rich granular sludge with a PHB content of 40 ± 4.6% and a high settling ability was successfully obtained. The analysis on sludge surface properties showed that the surface charge, extracellular polymeric substances (EPS) content and the sludge hydrophobicity all increased significantly, while the surface energy of sludge decreased to a relatively steady state accompanied with the growth of granular sludge. This study demonstrates that the metabolism of intracellular storages induced microbial production of EPS, which favored the formation of aerobic granules.

Application of rumen microorganisms for anaerobic bioconversion of lignocellulosic biomass.

Rumen in the mammalian animals is a natural cellulose-degrading system and the microorganisms inside have been found to be able to effectively digest lignocellulosic biomass. Furthermore, methane or volatile fatty acids, which could be further converted to other biofuels, are the two major products in such a system. This paper offers an overview of recent development in the application of rumen microorganisms for lignocellulosic biomass conversion. Application of recent molecular tools in the analysis of rumen microbial community, progress in the development of artificial rumen reactors, the latest research results about characterizing rumen-dominated anaerobic digestion process and energy products are summarized. Also, the potential application of such a rumen-dominated process is discussed.

In-situ utilization of generated electricity in an electrochemical membrane bioreactor to mitigate membrane fouling.

How to mitigate membrane fouling remains a critical challenge for widespread application of membrane bioreactors. Herein, an antifouling electrochemical membrane bioreactor (EMBR) was developed based on in-situ utilization of the generated electricity for fouling control. In this system, a maximum power density of 1.43 W/m(3) and a current density of 18.49 A/m(3) were obtained. The results demonstrate that the formed electric field reduced the deposition of sludge on membrane surface by enhancing the electrostatic repulsive force between them. The produced H2O2 at the cathode also contributed to the fouling mitigation by in-situ removing the membrane foulants. In addition, 93.7% chemical oxygen demand (COD) removal and 96.5% NH4(+)-N removal in average as well as a low effluent turbidity of below 2 NTU were achieved, indicating a good wastewater treatment performance of the EMBR. This work provides a proof-of-concept study of an antifouling MBR with high wastewater treatment efficiency and electricity recovery, and implies that electrochemical control might provide another promising avenue to in-situ suppress the membrane fouling in MBRs.

A novel electrochemical membrane bioreactor as a potential net energy producer for sustainable wastewater treatment.

One possible way to address both water and energy shortage issues, the two of major global challenges, is to recover energy and water resource from wastewater. Herein, a novel electrochemical membrane bioreactor (EMBR) was developed to recover energy from wastewater and meantime harvest clean water for reuse. With the help of the microorganisms in the biocatalysis and biodegradation process, net electricity could be recovered from a low-strength synthetic wastewater after estimating total energy consumption of this system. In addition, high-quality clean water was obtained for reuse. The results clearly demonstrate that, under the optimized operating conditions, it is possible to recover net energy from wastewater, while at the same time to harvest high-quality effluent for reuse with this novel wastewater treatment system.

Disintegration of aerobic granules induced by trans-2-decenoic acid.

One current major hurdle to practical implementation of aerobic granule technology is the frequent occurrence of granule disintegration during long-term operation. However, the mechanism behind this is largely unclear today. Here, 2-decenoic acid, which has been previously demonstrated to be released by Pseudomonas aeruginosa and disperse biofilms, was found to also induce the disintegration of aerobic granules. A comparison of the solution compositions from samples of only trans-2-decenoic acid, only aerobic granules, and granules added with trans-2-decenoic acid shows that bacteria and extracellular polymeric substances (EPS) were stripped from granule surface upon trans-2-decenoic acid dosing. Due to the possible toxicity of trans-2-decenoic acid at a saturation concentration, the disintegrated granules and the milky suspension in the disintegration test showed a significantly lower oxygen uptake rate than the un-integrated granules. This work suggests that trans-2-decenoic acid released by microbes might play a critical role in regulating the disintegration of aerobic granules.

Thermodynamic analysis on the binding of heavy metals onto extracellular polymeric substances (EPS) of activated sludge.

Metal binding to microbial extracellular polymeric substances (EPS) greatly influences the distribution of heavy metals in microbial aggregates, soil and aquatic systems in nature. In this work, the thermodynamic characteristics of the binding between aqueous metals (with copper ion as an example) and EPS of activated sludge were investigated. Isothermal titration calorimetry was employed to estimate the thermodynamic parameters for the binding of Cu²âº onto EPS, while three-dimensional excitation-emission matrix (EEM) fluorescence spectroscopy with parallel factor analysis was used for quantifying the complexation of Cu²âº with the EPS. The binding mechanisms were further explored by X-ray absorption fine structure (XAFS) and Fourier transform infrared (FTIR) spectroscopy analysis. The results show that the proteins and humic substances in EPS were both strong ligands for Cu²âº. The binding capacity N, binding constant K, binding enthalpy ΔH were calculated as 5.74 × 10⁻² mmol/g, 2.18 × 105 L/mol, and -11.30 kJ/mol, respectively, implying that such a binding process was exothermic and thermodynamically favorable. The binding process was found to be driven mainly by the entropy change of the reaction. A further investigation shows that Cu²âº bound with the oxygen atom in the carboxyl groups in the EPS molecules of activated sludge. This study facilitates a better understanding about the roles of EPS in protecting microbes against heavy metals.

Phenothiazine derivative-accelerated microbial extracellular electron transfer in bioelectrochemical system.

In bioelectrochemical system (BES) the extracellular electron transfer (EET) from bacteria to anode electrode is recognized as a crucial step that governs the anodic reaction efficiency. Here, we report a novel approach to substantially enhance the microbial EET by immobilization of a small active phenothiazine derivative, methylene blue, on electrode surface. A comparison of the currents generated by Shewanella oneidensis MR-1 and its mutants as well as the electrochemical analytical results reveal that the accelerated EET was attributed to enhanced interactions between the bacterial outer-membrane cytochromes and the immobilized methylene blue. A further investigation into the process using in situ Raman spectro-electrochemical method coupled with density functional theory calculations demonstrates that the electron shuttling was achieved through the change of the molecule conformation of phenothiazine in the redox process. These results offer useful information for engineering BES.