Fluorescent conjugated polymer nanovector for in vivo tracking and regulating the fate of stem cells for restoring infarcted myocardium.

Stem cell therapy holds great promise for cardiac regeneration. However, the lack of ability to control stem cell fate after in vivo transplantation greatly restricts its therapeutic outcomes. MicroRNA delivery has emerged as a powerful tool to control stem cell fate for enhanced cardiac regeneration. However, the clinical translation of therapy based on gene-transfected stem cells remains challenging, due to the unknown in vivo behaviors of stem cells. Here, we developed a nano-platform (i.e., PFBT@miR-1-Tat NPs) that can achieve triggered release of microRNA-1 to promote cardiac differentiation of mesenchymal stem cells (MSCs), and long-term tracking of transplanted MSCs through bright and ultra-stable fluorescence of conjugated polymer poly(9,9-dioctylfluorene-alt-benzothiadiazole) (PFBT). We found that PFBT@miR-1-Tat NP-treated MSCs significantly restored the infarcted myocardium by promoting stem cell cardiac differentiation and integration with the in situ cardiac tissues. Meanwhile, MSCs without gene delivery improved the infarcted heart functions mainly through a paracrine effect and blood vessel formation. The developed conjugated polymer nanovector should be a powerful tool for manipulating as well as revealing the fate of therapeutic cells in vivo, which is critical for optimizing the therapeutic route of gene and cell combined therapy and therefore for accelerating clinical translation. STATEMENT OF SIGNIFICANCE: The lack of controllability in stem cell fate and the unclear in vivo cellular behaviors restrict the therapeutic outcomes of stem cell therapy. Herein, we engineered fluorescent conjugated polymer nanoparticles as gene delivery nanovectors with controlled release and high intracellular delivery capability to harness the fate of mesenchymal stem cells (MSCs) in vivo, meanwhile to reveal the cellular mechanism of gene-treated stem cell therapy. As compared with only MSC treatment that improves infarcted myocardium functions through paracrine effect, treatment with conjugated polymer nanovector-treated MSCs significantly restored infarcted myocardium through enhancing MSC cardiac differentiation and integration with the in-situ cardiac tissues. These findings demonstrate that the conjugated polymer nanovector would be a powerful tool in optimizing gene and cell combined therapy.

Multiple comparisons of three different sources of biomaterials in the application of tumor tissue engineering in vitro and in vivo.

Potential anti-cancer drugs are frequently of low efficacy in clinics due to the lack of predictive models or the insufficient employment of existing preclinical test systems. Three-dimensional (3D) in vitro engineered tumor models can better predict the efficacy of novel drugs by reproducing the in vivo tumor microenvironment. In this study, three sources of scaffolds (decellularized lung scaffold, chitosan/gelatin scaffold, and poly-L-lactic acid scaffold) incorporated with breast cancer cells (MCF-7, 4T1) were bioengineered as a platform to study in vitro solid tumor development. The good biocompatibility of three scaffolds favored cell growth and proliferation. Cells in 3D scaffolds were less sensitive to chemotherapy and exhibited characteristics of higher malignancy compared to their 2D counterparts. The expression of breast cancer biomarkers in MCF-7 cells markedly up-regulated in 3D scaffolds in comparison with those in 2D cultures. Cells grown in 3D scaffolds were found to be more tumorigenic and angiogenic in BABL/c mice xenografts than cells grown from monolayers. The results demonstrate that 3D engineered tumor model can better mimic in vivo tumor and can serve as a more appropriate platform for the study and screening of novel cancer therapeutics.

Theranostics of Triple-Negative Breast Cancer Based on Conjugated Polymer Nanoparticles.

Triple-negative breast cancer (TNBC) does not respond to many targeted drugs due to the lack of three receptors (i.e., estrogen receptor, progesterone receptor, and human epidermal growth factor receptor-2), which makes it difficult for TNBC detection and treatment. As compared to traditional breast cancer treatments such as surgery and chemotherapy, photodynamic therapy (PDT) has emerged as a promising approach for treating TNBC due to its precise controllability, high spatiotemporal accuracy, and minimal invasive nature. However, traditional photosensitizers used in PDT are associated with limitations of aggregation-caused quenching (ACQ), and the ACQ induced a significant decrease in reactive oxygen species (ROS) generation. To address these, we synthesized a cyclic arginine-glycine-aspartic acid (cRGD) peptide-decorated conjugated polymer (CP) nanoparticles with poly[2-methoxy-5-(2-ethyl-hexyloxy)-1,4-phenylenevinylene] (MEH-PPV) as the photosensitizer for the theranostics of TNBC. The synthesized CP nanoparticles show bright fluorescence with high stability and could effectively produce ROS under light irradiation. Cell viability studies showed that the CP nanoparticles have negligible dark cytotoxicity and could efficiently kill the αvß3 integrin-overexpressed MDA-MB-231 cells (one subtype of TNBC cells) in a selective way. With the use of cRGD-modified MEH-PPV nanoparticles as the theranostic agent, it permits targeted imaging and PDT of TNBC both in the in vitro 3D tumor model and in living mice. The application of CP nanoparticles in the successful theranostics of TNBC could pave the way for future development of CP-based photosensitizers for clinical applications.

Electrospun three-dimensional aligned nanofibrous scaffolds for tissue engineering.

Engineered tissue constructs rely on biomaterials as support structures for tissue repair and regeneration. Among these biomaterials, polyester biomaterials have been widely used for scaffold construction because of their merits such as ease in synthesis, degradable properties, and elastomeric characteristics. To mimic the aligned structures of native extracellular matrix (ECM) in tissues such as nerve, heart and tendon, various polyester materials have been fabricated into aligned fibrous scaffolds with fibers ranging from several nanometers to several micrometers in diameter by electrospinning in a simple and reproducible manner. These aligned fibrous scaffolds, especially the three-dimensional (3D) aligned nanofibrous scaffolds have emerged as a promising solution for tissue regeneration. Compared with two-dimensional (2D) scaffolds, the 3D aligned nanofibrous scaffolds provide another dimension for cell behaviors such as morphogenesis, migration and cell-cell interactions, which is important in regulating the stem cell fate and tissue regeneration. In this review, we provide an extensive overview on recent efforts for constructing 3D aligned polyester nanofibrous scaffolds by electrospinning, then the results of cell-specific functions dependent on such physical and chemical cues, and discuss their potentials in improving or restoring damaged tissues.

3D culture of neural stem cells within conductive PEDOT layer-assembled chitosan/gelatin scaffolds for neural tissue engineering.

Neural stem cells (NSCs), as a self-renewing and multipotent cell population, have been widely studied for never regeneration. Engineering scaffold is one of the important factors to regulate NSCs proliferation and differentiation towards the formation of the desired cells and tissues. Because neural cells are electro-active ones, a conductive scaffold is required to provide three-dimensional cell growth microenvironments and appropriate synergistic cell guidance cues. In this study, a poly (3,4­ethylenedioxythiophene)/chitosan/gelatin (PEDOT/Cs/Gel) scaffold was prepared via in situ interfacial polymerization, with a nanostructured layer of PEDOT assembling on the channel surface of porous Cs/Gel scaffold. This electrically conductive, three-dimensional, porous and biodegradable PEDOT/Cs/Gel scaffold was used as a novel scaffold for NSCs three-dimension (3D) culture in vitro. It was found that the layer of PEDOT on the channel surface of Cs/Gel scaffolds could greatly promote NSCs adhesion and proliferation. Additionally, under the differentiation condition, the protein and gene analysis suggested that PEDOT/Cs/Gel scaffolds could significantly enhance the NSCs differentiation towards neurons and astrocytes with the up-regulation of ß tubulin-III and GFAP expression. In conclusion, these results demonstrated that the PEDOT/Cs/Gel scaffolds as an electrically conductive scaffold could not only promote NSCs adhesion and proliferation but also enhance NSCs differentiation into neurons and astrocytes with higher protein and gene expression. PEDOT-assembled Cs/Gel scaffold will be a promising conductive substrate for NSCs research and neural tissue engineering.

Hyaluronic acid doped-poly(3,4-ethylenedioxythiophene)/chitosan/gelatin (PEDOT-HA/Cs/Gel) porous conductive scaffold for nerve regeneration.

Conducting polymer, as a "smart" biomaterial, has been increasingly used to construct tissue engineered scaffold for nerve tissue regeneration. In this study, a novel porous conductive scaffold was prepared by incorporating conductive hyaluronic acid (HA) doped-poly(3,4-ethylenedioxythiophene) (PEDOT-HA) nanoparticles into a chitosan/gelatin (Cs/Gel) matrix. The physicochemical characteristics of Cs/Gel scaffold with 0-10wt% PEDOT-HA were analyzed and the results indicated that the incorporation of PEDOT-HA into scaffold increased the electrical and mechanical properties while decreasing the porosity and water absorption. Moreover, in vitro biodegradation of scaffold displayed a declining trend with the PEDOT-HA content increased. About the biocompatibility of conductive scaffold, neuron-like rat phaeochromocytoma (PC12) cells were cultured in scaffold to evaluate cell adhesion and growth. 8% PEDOT-HA/Cs/Gel scaffold had a higher cell adhesive efficiency and cell viability than the other conductive scaffolds. Furthermore, cells in the scaffold with 8wt% PEDOT-HA expressed higher synapse growth gene of GAP43 and SYP compared with Cs/Gel control group. These results suggest that 8%PEDOT-HA/Cs/Gel scaffold is an attractive cell culture conductive substrate which could support cell adhesion, survival, proliferation, and synapse growth for the application in nerve tissue regeneration.

Neural stem cell proliferation and differentiation in the conductive PEDOT-HA/Cs/Gel scaffold for neural tissue engineering.

Engineering scaffolds with excellent electro-activity is increasingly important in tissue engineering and regenerative medicine. Herein, conductive poly(3,4-ethylenedioxythiophene) doped with hyaluronic acid (PEDOT-HA) nanoparticles were firstly synthesized via chemical oxidant polymerization. A three-dimensional (3D) PEDOT-HA/Cs/Gel scaffold was then developed by introducing PEDOT-HA nanoparticles into a chitosan/gelatin (Cs/Gel) matrix. HA, as a bridge, not only was used as a dopant, but also combined PEDOT into the Cs/Gel via chemical crosslinking. The PEDOT-HA/Cs/Gel scaffold was used as a conductive substrate for neural stem cell (NSC) culture in vitro. The results demonstrated that the PEDOT-HA/Cs/Gel scaffold had excellent biocompatibility for NSC proliferation and differentiation. 3D confocal fluorescence images showed cells attached on the channel surface of Cs/Gel and PEDOT-HA/Cs/Gel scaffolds with a normal neuronal morphology. Compared to the Cs/Gel scaffold, the PEDOT-HA/Cs/Gel scaffold not only promoted NSC proliferation with up-regulated expression of Ki67, but also enhanced NSC differentiation into neurons and astrocytes with up-regulated expression of ß tubulin-III and GFAP, respectively. It is expected that this electro-active and bio-active PEDOT-HA/Cs/Gel scaffold will be used as a conductive platform to regulate NSC behavior for neural tissue engineering.

Statistical study of biomechanics of living brain cells during growth and maturation on artificial substrates.

There is increasing evidence that mechanical issues play a vital role in neuron growth and brain development. The importance of this grows as novel devices, whose material properties differ from cells, are increasingly implanted in the body. In this work, we studied the mechanical properties of rat brain cells over time and on different materials by using a high throughput magnetic tweezers system. It was found that the elastic moduli of both neurite and soma in networked neurons increased with growth. However, neurites at DIV4 exhibited a relatively high stiffness, which could be ascribed to the high outgrowth tension. The power-law exponents (viscoelasticity) of both neurites and somas of neurons decreased with culture time. On the other hand, the stiffness of glial cells also increased with maturity. Furthermore, both neurites and glia become softer when cultured on compliant substrates. Especially, the glial cells cultured on a soft substrate obviously showed a less dense and more porous actin and GFAP mesh. In addition, the viscoelasticity of both neurites and glia did not show a significant dependence on the substrates' stiffness.

Development and fabrication of a two-layer tissue engineered osteochondral composite using hybrid hydrogel-cancellous bone scaffolds in a spinner flask.

Biological treatment using engineered osteochondral composites has received growing attention for the repair of cartilage defects. Osteochondral composites combined with a dynamic culture provide great potential for improving the quality of constructs and cartilage regeneration as dynamic conditions mimic the in vivo condition where cells were constantly subjected to mechanical and chemical stimulation. In the present study, biophasic composites were produced in vitro consisting of cell-hydrogel (CH) and cell-cancellous bone (CB) constructs, followed by culturing in a dynamic system in a spinner flask. The aim of this study was to investigate cell behaviors (i.e. cell growth, differentiation, distribution and matrix deposition) cultured in different constructs under static and dynamic circumstances. As a result, we found that mechanical stimulation promoted osteogenic and chondrogenic differentiation of cells as indicated by the increased expression of ALP and glycosaminoglycan (GAG) in either bone or cartilage substitute materials. Dynamic culture yielded a preferable extracellular matrix production, particularly in hydrogel scaffolds. In addition, the enhanced mass transfer contributed to the interface formation, cells infiltration and distribution in the osteochondral composites. This study demonstrates that osteochondral composites incorporated with a dynamic culture improved the performance of the constructs, providing the basis for a promising tool and a better strategy for the rapid fabrication of osteochondral substitutes and regeneration of injured cartilage.

Three-dimensional dynamic fabrication of engineered cartilage based on chitosan/gelatin hybrid hydrogel scaffold in a spinner flask with a special designed steel frame.

Cartilage transplantation using in vitro tissue engineered cartilage is considered a promising treatment for articular cartilage defects. In this study, we assessed the advantages of adipose derived stem cells (ADSCs) combined with chitosan/gelatin hybrid hydrogel scaffolds, which acted as a cartilage biomimetic scaffold, to fabricate a tissue engineered cartilage dynamically in vitro and compared this with traditional static culture. Physical properties of the hydrogel scaffolds were evaluated and ADSCs were inoculated into the hydrogel at a density of 1×10(7) cells/mL and cultured in a spinner flask with a special designed steel framework and feed with chondrogenic inductive media for two weeks. The results showed that the average pore size, porosity, swelling rate and elasticity modulus of hybrid scaffolds with good biocompatibility were 118.25±19.51 µm, 82.60±2.34%, 361.28±0.47% and 61.2±0.16 kPa, respectively. ADSCs grew well in chitosan/gelatin hybrid scaffold and successfully differentiated into chondrocytes, showing that the scaffolds were suitable for tissue engineering applications in cartilage regeneration. Induced cells cultivated in a dynamic spinner flask with a special designed steel frame expressed more proteoglycans and the cell distribution was much more uniform with the scaffold being filled mostly with extracellular matrix produced by cells. A spinner flask with framework promoted proliferation and chondrogenic differentiation of ADSCs within chitosan/gelatin hybrid scaffolds and accelerated dynamic fabrication of cell-hydrogel constructs, which could be a selective and good method to construct tissue engineered cartilage in vitro.