Identification of Aggregation Pheromone as an Attractant for Odontothrips loti, A Serious Thrips Pest on Alfalfa.

Odontothrips loti (Haliday) (Thysanoptera: Thripidae) is one of the most serious pests on alfalfa, causing direct damage by feeding and indirect damage by transmitting plant viruses. This damage causes significant loss in alfalfa production. Semiochemicals offer opportunities to develop new approaches to thrips management. In this study, behavioral responses of female and male adults of O. loti to headspace volatiles from live female and male conspecifics were tested in a Y-tube olfactometer. The results showed that both male and female adults of O. loti were attracted to the odors released by conspecific males but not those released by females. Headspace volatiles released by female and male adults were collected using headspace solid-phase microextraction (HS-SPME). The active compound in the volatiles was identified by gas chromatography-mass spectrometry (GC-MS). The analysis showed that there was one major compound, (R)-lavandulyl (R)-2-methylbutanoate. The attractive activity of the synthetic aggregation pheromone compound was tested under laboratory and field conditions. In an olfactometer, both male and female adults showed significant preference for synthetic (R)-lavandulyl (R)-2-methylbutanoate at certain doses. Lures with synthetic (R)-lavandulyl (R)-2-methylbutanoate significantly increased the trap catches of sticky white traps at doses of 40-80 µg in the field. This study confirmed the production of aggregation pheromone by O. loti male adults and identified its active compound as (R)-lavandulyl (R)-2-methylbutanoate, providing a basis for population monitoring and mass trapping of this pest.

Genome-Wide Identification of the WRKY Gene Family and Functional Characterization of CpWRKY5 in Cucurbita pepo.

The WRKY gene family is crucial for regulating plant growth and development. However, the WRKY gene is rarely studied in naked kernel formation in hull-less Cucurbita pepo L. (HLCP), a natural mutant that lacks the seed coat. In this research, 76 WRKY genes were identified through bioinformatics-based methods in C. pepo, and their phylogenetics, conserved motifs, synteny, collinearity, and temporal expression during seed coat development were analyzed. The results showed that 76 CpWRKYs were identified and categorized into three main groups (I-III), with Group II further divided into five subgroups (IIa-IIe). Moreover, 31 segmental duplication events were identified in 49 CpWRKY genes. A synteny analysis revealed that C. pepo shared more collinear regions with cucumber than with melon. Furthermore, quantitative RT-PCR (qRT-PCR) results indicated the differential expression of CpWRKYs across different varieties, with notable variations in seed coat development between HLCP and CP being attributed to differences in CpWRKY5 expression. To investigate this further, CpWRKY5-overexpression tobacco plants were generated, resulting in increased lignin content and an upregulation of related genes, as confirmed by qRT-PCR. This study offers valuable insights for future functional investigations of CpWRKY genes and presents novel information for understanding the regulation mechanism of lignin synthesis.

Novelty three stages for humification of sewage sludge during hyperthermophilic aerobic fermentation.

Compared with conventional aerobic fermentation (CAF), there is limited knowledge of how hyperthermophilic aerobic fermentation (HAF) enhances the humification of sewage sludge. This study compared three novel stages of organic degradation, precursors, functional groups, bacterial community, and humus synthesis mechanism in HAF with CAF. The results showed that organic matter (OM) degraded rapidly, and 68% of the degradation could be completed of stage I in HAF. Compared with the initial stage, ammonium nitrogen (NH4+-N), water-soluble organic carbon, and water-soluble total nitrogen increased by 2.83 times, 40.5 times, and 33.5 times, respectively. Cellulose and hemicellulose decreased by 29.22% and 21.85%, respectively. These results suggested that temperature (>80 °C) and Bacillus dominated accelerate the humification process by rapidly improving OM degradation. Compared with the initial value of HAF, the maximum increment of reducing sugar at stage II was 297%, and the degradation rate of cellulose was effectively increased by 21.03% compared with that of CAF. The precursors such as reducing sugars and amino acids formed humus at stage II. The content of Aryl C increased significantly during the HAF process, the degree of polymerization of humus and the aromatization degree of HA and FA increased significantly, and complex organic macromolecular material polymers were formed at stage III. The sugar-amine condensation was the mechanism of humification in the sludge HAF process. This investigation provided three new stages of insights into the synthesis of humification during the HAF process and extended the current mechanism of humification in the HAF process.

From marine to freshwater environment: A review of the ecotoxicological effects of microplastics.

Microplastics (MPs) have been widely detected in the world's water, which may pose a significant threat to the ecosystem as a whole and have been a subject of much attention because their presence impacts seas, lakes, rivers, and even the Polar Regions. There have been numerous studies that report direct adverse effects on marine organisms, but only a few have explored their ecological effects on freshwater organisms. In this field, there is still a lack of a systematic overview of the toxic effects and mechanisms of MPs on aquatic organisms, as well as a consistent understanding of the potential ecological consequences. This review describes the fate and impact on marine and freshwater aquatic organisms. Further, we examine the toxicology of MPs in order to uncover the relationship between aquatic organism responses to MPs and ecological disorders. In addition, an overview of the factors that may affect the toxicity effects of MPs on aquatic organisms was presented along with a brief examination of their identification and characterization. MPs were discussed in terms of their physicochemical properties in relation to their toxicological concerns regarding their bioavailability and environmental impact. This paper focuses on the progress of the toxicological studies of MPs on aquatic organisms (bacteria, algae, Daphnia, and fish, etc.) of different trophic levels, and explores its toxic mechanism, such as behavioral alternations, metabolism disorders, immune response, and poses a threat to the composition and stability of the ecosystem. We also review the main factors affecting the toxicity of MPs to aquatic organisms, including direct factors (polymer types, sizes, shapes, surface chemistry, etc.) and indirect factors (persistent organic pollutants, heavy metal ions, additives, and monomer, etc.), and the future research trends of MPs ecotoxicology are also pointed out. The findings of this study will be helpful in guiding future marine and freshwater rubbish studies and management strategies.

Polymethyl methacrylate resin containing ε-poly-L-lysine and 2-methacryloyloxyethyl phosphorylcholine with antimicrobial effects.

STATEMENT OF PROBLEM: Polymethyl methacrylate (PMMA) is commonly used in dentistry, including as a denture base material. However, the colonization of a PMMA surface by microbial microorganisms could increase the risk of oral diseases such as denture stomatitis and gingivitis. The development of PMMA with antibacterial properties should improve its clinical application, but whether adding ε-poly-L-lysine (ε-PL) and 2-methacryloyloxyethyl phosphorylcholine (MPC) provides antimicrobial effects is unclear. PURPOSE: This in vitro study aimed to develop a novel antibacterial PMMA resin containing the natural nontoxic antibacterial agent ε-PL and the protein repellent agent MPC. The mechanical properties, protein repellency, and antimicrobial activities of the resin were then evaluated. MATERIAL AND METHODS: Different mass fractions of ε-PL and MPC were mixed into PMMA as the experimental groups, with unaltered PMMA as the control group. The flexural strength (n=10) and surface roughness (n=6) of the resulting mixtures were measured to determine their mechanical properties. The antiprotein properties were measured by using the micro bicinchoninic acid method (n=6). The antimicrobial effect of the resin was assessed using live/dead staining (n=6) and methyltransferase (MTT) assays (n=10). According to the variance homogeneity and normal distribution results, 1-way analysis of variance followed by the Tukey honestly significant difference test or the Welch test and the Games-Howell test were used (α=.05 for all tests). RESULTS: No significant differences were found in the flexural strength values and surface roughness of the specimens containing 1.5% MPC and 1.5% ε-PL compared with those of the control (P>.05). The addition of ε-PL to the PMMA resin alone significantly increased its bactericidal properties (P<.05). Adding both ε-PL and MPC further increased the antibacterial activity of the PMMA resin without increasing protein adhesion more than in the control group. CONCLUSIONS: The incorporation of both ε-PL and MPC into PMMA improved its antibacterial capacity without affecting its mechanical properties and did not increase protein adhesion. Therefore, the novel PMMA fabricated in this study shows promise for dental applications.

Influence of sludge treatment methods on behaviors of microplastics adsorbed cadmium and its driving factors.

The complicated contamination of microplastics (MPs) and heavy metals in sludge has garnered substantial attention in recent years; however, research on the behavior of MPs loading of heavy metals in sludge after sludge treatment methods is limited. Four representative sludge treatment methods were selected herein: anaerobic digestion, thermal drying, thermal hydrolysis (TH), and aerobic composting. Before and after sludge treatment, the chemical bonding of MPs, cadmium (Cd) adsorption properties, and metabolic changes in the microbial community succession was analyzed, and the factors influencing differences in Cd sorption by sludge MPs were explored. The results revealed that Cd adsorption by MPs occurs as multilayer physical adsorption that can be well fitted by Freundlich isotherms. Compared with the other three treatments, TH led to the most significant effect on the chemical bonding properties of the MPs, with a more than two-fold increase in C-O single bonds and CO double bonds, as well as adsorption of the highest amount of Cd at 767 µg/g. In addition, sludge conductivity and water content also affected Cd sorption capacity, with correlation coefficients of 0.405 and -0.384. Pedobacter, Flavobacterium, Lysobacter, and Sphingobacterium in the sludge presented a high degree of coupling with adsorption capacity, it was inferred that the above dominant species of bacteria may affect the adsorption of Cd by microplastics through the production of extracellular enzyme forms.

Enhancing the Nucleolytic Resistance and Bioactivity of Functional Nucleic Acids by Diverse Nanostructures through in Situ Polymerization-Induced Self-assembly.

Functional nucleic acids (FNAs) are garnering tremendous interest owing to their high modularity and unique bioactivity. Three-dimensional FNAs have been developed to overcome the issues of nuclease degradation and limited cell uptake. We have developed a new facile approach to the synthesis of multiple three-dimensional FNA nanostructures by harnessing photo-polymerization-induced self-assembly. Sgc8 aptamer and CpG oligonucleotide were modified as macro chain-transfer reagents to mediate in situ polymerization and self-assembly. Diverse structures, including micelles, rods, and short worms, afford these two FNAs afford these two FNAs with higher nuclease resistance in serum serum, greater cellular uptake efficiency, and increased bioactivity.

Engineering Biomimetic Nanofiber Microspheres with Tailored Size, Predesigned Structure, and Desired Composition via Gas Bubble-Mediated Coaxial Electrospray.

Minimally invasive therapies avoiding surgical complexities evoke great interest in developing injectable biomedical devices. Herein, a versatile approach is reported for engineering injectable and biomimetic nanofiber microspheres (NMs) with tunable sizes, predesigned structures, and desired compositions via gas bubble-mediated coaxial electrospraying. The sizes and structures of NMs are controlled by adjusting processing parameters including air flow rate, applied voltage, distance, and spinneret configuration in the coaxial setup. Importantly, unlike the self-assembly method, this technique can be used to fabricate NMs from any material feasible for electrospinning or other nanofiber fabrication techniques. To demonstrate the versatility, open porous NMs are successfully fabricated that consist of various short nanofibers made of poly(ε-caprolactone), poly(lactic-co-glycolic acid), gelatin, methacrylated gelatin, bioglass, and magneto-responsive polymer composites. Open porous NMs support human neural progenitor cell growth in 3D with a larger number and more neurites than nonporous NMs. Additionally, highly open porous NMs show faster cell infiltration and host tissue integration than nonporous NMs after subcutaneous injection to rats. Such a novel class of NMs holds great potential for many biomedical applications such as tissue filling, cell and drug delivery, and minimally invasive tissue regeneration.

Vapreotide-mediated hierarchical mineralized Ag/Au nanoshells for photothermal anti-tumor therapy.

A new type of vapreotide-templated Ag/Au bimetallic nanoshells (Vap@Ag/AuNSs) were successfully designed and fabricated based on polypeptide-directed mineralization and hierarchical self-assembly mechanisms under mild synthetic conditions. The nanoparticles with polypeptides serving as a core and coated Ag/Au bimetallic nanoshells exhibit diverse advantages, such as excellent biocompatibility, tumor targeting and low-cost. The Vap@Ag/AuNSs share excellent dispersibility, uniform size (120 nm) and a positive zeta potential (36.74 ± 4.49 mV), hence they easily accumulate in negatively charged tumor tissue. The results of thermal imaging, temperature variation assays and photothermal conversion efficiency (41.6%) indicated that Vap@Ag/AuNSs have excellent photothermal conversion capability. Based on their photothermal response, as well as biocompatibility determined by MTT assay, the prominent anti-tumor effects of Vap@Ag/AuNSs have been verified by fluorescein diacetate staining. Therefore, Vap@Ag/AuNSs are novel and promising candidates for photothermal tumor therapy.

Treatment of a Class II Division 1 malocclusion with the combination of a myofunctional trainer and fixed appliances.

This case report describes the combined use of a myofunctional Trainer for Braces and fixed appliances to treat a 10-year-old girl with a Class II Division 1 malocclusion that featured severe maxillary incisor protrusion, a large overjet, and a V-shaped maxillary arch. She had a convex profile with an underdeveloped mandible. The superiority of myofunctional training in the case was to eliminate mouth breathing and lip sucking habits, train the oral musculature, stimulate mandibular growth, and make braces work more efficiently. The posttreatment facial photographs show improvement in the facial profile. Proper occlusion and facial balance were created, which were quite stable as demonstrated by the patient's 4-year follow-up records.

Self-Assembled Aptamer-Grafted Hyperbranched Polymer Nanocarrier for Targeted and Photoresponsive Drug Delivery.

Photoresponsive materials are emerging as ideal carriers for precisely controlled drug delivery owing to their high spatiotemporal selectivity. However, drawbacks such as slow release kinetics, inherent toxicity, and lack of targeting ability hinder their translation into clinical use. We constructed a new DNA aptamer-grafted photoresponsive hyperbranched polymer, which can self-assemble into nanoparticles, thereby achieving biocompatibility and target specificity, as well as light-controllable release behavior. Upon UV-irradiation, rapid release induced by disassembly was observed for Nile Red-loaded nanoparticles. Further in vitro cell studies confirmed this delivery system's specific binding and internalization performance arising from the DNA aptamer corona. The DOX-loaded nanoassembly exhibited selective phototriggered cytotoxicity towards cancer cells, indicating its promising therapeutic effect as a smart drug delivery system.

Engineering an in situ crosslinkable hydrogel for enhanced remyelination.

Remyelination has to occur to fully regenerate injured spinal cords or brain tissues. A growing body of evidence has suggested that exogenous cell transplantation is one promising strategy to promote remyelination. However, direct injection of neural stem cells or oligodendrocyte progenitor cells (OPCs) to the lesion site may not be an optimal therapeutic strategy due to poor viability and functionality of transplanted cells resulted from the local hostile tissue environment. The overall objective of this study was to engineer an injectable biocompatible hydrogel system as a supportive niche to provide a regeneration permissive microenvironment for transplanted OPCs to survive, functionally differentiate, and remyelinate central nervous system (CNS) lesions. A highly biocompatible hydrogel, based on thiol-functionalized hyaluronic acid and thiol-functionalized gelatin, which can be crosslinked by poly-(ethylene glycol) diacrylate (PEGDA), was used. These hydrogels were optimized first regarding cell adhesive properties and mechanical properties to best support the growth properties of OPCs in culture. Transplanted OPCs with the hydrogels optimized in vitro exhibited enhanced survival and oligodendrogenic differentiation and were able to remyelinate demyelinated axons inside ethidium bromide (EB) demyelination lesion in adult spinal cord. This study provides a new possible therapeutic approach to treat CNS injuries in which cell therapies may be essential.

Environmental condition-dependent effects of aquatic humic substances on the distribution of phenanthrene in microplastic-contaminated aquatic systems.

Numerous studies have focused on the interaction between microplastics (MPs) and phenanthrene (PHE) in aquatic environments. However, the intricate roles of aquatic humic substances (HS), which vary with environmental conditions, in influencing PHE-MP interactions are not yet fully understood. This study investigates the variable and environmentally sensitive roles of HS in modifying the interactions between PHE and polyethylene (PE) MPs under laboratory-simulated aquatic conditions with varying solution chemistry, including pH, HS types, HS concentrations, and ionic strength. Our findings show that the presence of HS significantly reduces the adsorption of PHE onto both pristine and aged PE MPs, with a more pronounced reduction observed in aged PEs. This effect is highlighted by a notable decrease in the partitioning coefficient (Kd) of PHE, which falls from 2.60 × 104 to 1.30 × 104 L/kg on MPs in the presence of HS. The study also demonstrates that alterations in the net charge of HS solutions are crucial in modifying PHE distribution onto PEs. An initial decrease in Kd values at higher pH levels is reversed when HS is introduced. Furthermore, an increase in HS concentrations is associated with lower Kd values. In conditions of higher ionic strength, the retention of PHE by HS is intensified, likely due to an enhanced salting-out effect. This research highlights the significant role of aquatic HS in modulating the distribution of PHE in MP-polluted waters, which is highly influenced by various solution chemistry factors. The findings are vital for understanding the fate of PHE in MP-contaminated aquatic environments and can contribute to refining predictive models that consider diverse solution chemistry scenarios.

Microplastics enhance the invasion of exotic submerged macrophytes by mediating plant functional traits, sediment properties, and microbial communities.

Plant invasions and microplastics (MPs) have significantly altered the structure and function of aquatic habitats worldwide, resulting in severe damage to aquatic ecosystem health. However, the effects of MPs on plant invasion and the underlying mechanisms remain largely unknown. In this study, we conducted mesocosm experiments over a 90-day period to assess the effects of polystyrene microplastics on the invasion of exotic submerged macrophytes, sediment physicochemical properties, and sediment bacterial communities. Our results showed that PS-MPs significantly promoted the performance of functional traits and the invasive ability of exotic submerged macrophytes, while native plants remained unaffected. Moreover, PS-MPs addition significantly decreased sediment pH while increasing sediment carbon and nitrogen content. Additionally, MPs increased the diversity of sediment bacterial community but inhibited its structural stability, thereby impacting sediment bacterial multifunctionality to varying degrees. Importantly, we identified sediment properties, bacterial composition, and bacterial multifunctionality as key mediators that greatly enhance the invasion of exotic submerged macrophytes. These findings provide compelling evidence that the increase in MPs may exacerbate the invasion risk of exotic submerged macrophytes through multiple pathways. Overall, this study enhances our understanding of the ecological impacts of MPs on aquatic plant invasion and the health of aquatic ecosystems.

Advances of regenerated and functionalized silk biomaterials and application in skin wound healing.

The cocoon silk of silkworms (Bombyx mori) has multiple potential applications in biomedicine due to its good biocompatibility, mechanical properties, degradability, and plasticity. Numerous studies have confirmed that silk material dressings are more effective than traditional ones in the skin wound healing process. Silk material research has recently moved toward functionalized biomaterials and achieved remarkable results. Herein, we summarize the recent advances in functionalized silk materials and their efficacy in skin wound healing. In particular, transgenic technology has realized the specific expression of human growth factors in the silk glands of the silkworms, which lays the foundation for fabricating novel and low-cost functionalized materials. Without a green and safe preparation process, the best raw silk materials cannot be made into medically safe products. Therefore, we provide an overview of green and gentle approaches for silk degumming and silk sericin (SS) extraction. Moreover, we summarize and discuss the processing methods of silk fibroin (SF) and SS materials and their potential applications, such as burns, diabetic wounds, and other wounds. This review aims to enhance our understanding of new advances and directions in silk materials and guide future biomedical research.

Fluorescent Pdots Facilitate High-Resolution Mapping of the Intact Meningeal Vascular Network and Eye-Brain Connections.

Meningeal vascular network is significant in neurology and neurosurgery. However, high-resolution imaging of intact meningeal vascular network is lacking. In this work, we develop a practical experimental method to ensure that the intact meninges are morphologically unfolded and fixed in an agarose gel. With the help of high-brightness polymer dots (Pdots) as probe, macroscopic and detailed imaging of the vascular network on the intact dorsal meninges can be performed. Meningeal vessels are symmetrically distributed along the superior sagittal sinus, and the distribution of meningeal vessels had a certain degree of hierarchy. The meninges are thicker blood vessels and capillary networks from the outside to the inside. Moreover, the diameter of the capillaries is 3.96 ± 0.89 µm. Interestingly, meningeal primo vessels in the central nervous system of mice is imaged with the diameter of 4.18 ± 1.18 µm, which has not been reported previously. It is worth mentioning that we found that orthotopic xenografts of brain tumors caused the appearance of corneal neovascularization and morphological changes in optic nerve microvessels. In conclusion, our work provides an effective Pdots-based imaging method for follow-up research on meningeal vascular-related diseases, and illustrates that the eye can serve as a window for the prevention and diagnosis of brain diseases.

Ultra-Flexible, Breathable, and Robust PAN/MWCNTs/PANI Nanofiber Networks for High-Performance Wearable Gas Sensor Application.

Wearable gas sensors have drawn great attention for potential applications in health monitoring, minienvironment detection, and advanced soft electronic noses. However, it still remains a great challenge to simultaneously achieve excellent flexibility, high sensitivity, robustness, and gas permeability, because of the inherent limitation of widely used traditional organic flexible substrates. Herein, an electrospinning polyacrylonitrile (PAN) nanofiber network was designed as a flexible substrate, on which an ultraflexible wearable gas sensor was prepared with in situ assembled polyaniline (PANI) and multiwalled carbon nanotubes (MWCNTs) as a sensitive layer. The unique nanofiber network and strong binding force between substrate and sensing materials endow the wearable gas sensor with excellent robustness, flexibility, and gas permeability. The wearable sensor can maintain stable NH3 sensing performance while sustaining extreme bending and stretching (50% of strain). The Young's modulus of wearable PAN/MWCNTs/PANI sensor is as low as 18.9 MPa, which is several orders of magnitude smaller than those of reported flexible sensors. The water vapor transmission rate of the sensor is 0.38 g/(cm2 24 h), which enables the wearing comfort of the sensor. Most importantly, due to the effective exposure of sensing sites as well as the heterostructure effect between MWCNTs and PANI, the sensor shows high sensitivity to NH3 at room temperature, and the theoretical limit of detection is as low as 300 ppb. This work provides a new avenue for the realization of reliable and high-performance wearable gas sensors.

Supragingival microbiome variations and the influence of Candida albicans in adolescent orthodontic patients with gingivitis.

Introduction: Gingivitis is a prevalent complication in adolescents undergoing fixed orthodontic treatments. However, changes in the supragingival microbiome associated with gingivitis and the impact of Candida albicans remain elusive. Therefore, we investigated supragingival microbiome discrepancy and C. albicans colonization in adolescent orthodontic patients with gingivitis. Methods: Dental plaques were collected from 30 gingivitis patients and 24 healthy adolescents, all undergoing fixed orthodontic treatment. The supragingival microbiome composition was analyzed using 16S rRNA sequencing. C. albicans colonization was determined using fungal culture and real-time quantitative polymerase chain reaction. Results: Our analysis revealed significantly heightened microbial diversity in the Gingivitis group. Notably, patients with gingivitis exhibited an enrichment of periodontal pathogens, such as Saccharibacteria (TM7) [G-1], Selenomonas, Actinomyces dentalis, and Selenomonas sputigena. Additionally, 33% of the gingivitis patients tested positive for C. albicans, exhibiting significantly elevated levels of absolute abundance, while all healthy patients tested negative. Significant differences in microbial composition were also noted between C. albicans-positive and -negative samples in the Gingivitis group. Conclusion: Significant disparities were observed in the supragingival microbiome of adolescent orthodontic patients with and without gingivitis. The presence of C. albicans in the supragingival plaque may alter the microbiome composition and potentially contribute to gingivitis pathogenesis.

• Adolescent patients undergoing fixed orthodontic treatment, with and without gingivitis, show significant differences in their marginal supragingival plaque microbiomes. • Adolescent patients with gingivitis exhibit a significantly higher rate of Candida albicans colonization than healthy individuals. • The colonization of C. albicans alters the composition of the marginal supragingival plaque microbiome in patients with gingivitis.

Does invasive submerged macrophyte diversity affect dissimilatory nitrate reduction processes in sediments with varying microplastics?

Nitrogen removal is essential for restoring eutrophic lakes. Microorganisms and aquatic plants in lakes are both crucial for removing excess nitrogen. However, microplastic (MP) pollution and the invasion of exotic aquatic plants have become increasingly serious in lake ecosystems due to human activity and plant-dominant traits. This field mesocosm study explored how the diversity of invasive submerged macrophytes affects denitrification (DNF), anammox (ANA), and dissimilatory nitrate reduction to ammonium (DNRA) in lake sediments with varying MPs. Results showed that invasive macrophytes suppressed DNF rates, but DNRA and ANA were less sensitive than DNF to the diversity of invasive species. Sediment MPs increased the biomass of invasive species more than native species, but did not affect microbial processes. The effects of MPs on nitrate dissimilatory reduction were process-specific. MPs increased DNF rates and the competitive advantage of DNF over DNRA by changing the sediment environment. The decoupling of DNF and ANA was also observed, with increased DNF rates and decreased ANA rates. The study findings suggested new insights into how the invasion of exotic submerged macrophytes affects the sediment nitrogen cycle complex environments.

Effect of the staging comprehensive treatment with acupuncture-moxibustion on Bell's facial palsy in the acute stage. / 针灸分期综合治疗急性期贝尔面瘫疗效观察.

OBJECTIVES: To compare the clinical effect on Bell's facial palsy in the acute stage between the staging comprehensive treatment with acupuncture-moxibustion and western medication. METHODS: Sixty patients with Bell's facial palsy in the acute stage were randomly divided into an observation group and a control group, with 30 cases in each one. The patients in the control group were administered orally with prednisone acetate tablets and methylcobalamin tablets until the 28th day of illness. In the observation group, the staging comprehensive treatment with acupuncture-moxibustion was adopted. On the affected side, Qianzheng (EX-HN 16), Yifeng (TE 17), Sibai (ST 2), Yangbai (GB 14), Jiache (ST 6), Dicang (ST 4) and Touwei (ST 8), etc. were stimulated. In the acute stage (Day 1 to 7 of illness), the routine acupuncture and the point-toward-point needle insertion were delivered, no any manipulation was exerted at acupoints, and the needles were retained for 30 min. In the subacute stage (Day 8 to 14 of illness), on the base of the treatment as the acute stage, the depth of needle insertion was adjusted at a part of acupoints and the even needling technique was operated by twisting needle. Besides, electroacupuncture (EA) was attached to Qianzheng (EX-HN 16) and Dicang (ST 4), with continuous wave of low intensity and high frequency, 100 Hz, for 20 min. In the recovery stage (Day 15 to 28 of illness), on the base of the treatment as the subacute stage, the heavy stimulation of acupuncture was given, in which, the sticking and lifting needle techniques were delivered after the needles were inserted from Sibai (ST 2) toward Dicang (ST 4), and from Dicang (ST 4) toward Jiache (ST 6), separately; warm needling was operated at Yifeng (TE 17), and EA changed to stimulate the acupoints with the intermittent wave of high intensity and low frequency, 2 Hz, for 30 min. Acupuncture-moxibustion was given once every other day until the end of the 28th day of illness. The level of House-Brackmann facial nerve function rating scale (H-B grade),the score of Sunnybrook facial nerve grading system (Sunnybrook), the score of facial disability index (FDI), the temperature difference in the infrared thermal imaging facial area and electromyogram (EMG) situation of the affected muscle group were observed before and after treatment in the two groups. Using musculoskeletal ultrasound,the facial nerve diameter was detected and the clinical effect was compared between the two groups. RESULTS: After treatment, the level of H-B grade, Sunnybrook score, the scores of physical function and social life function in FDI were improved when compared with those before treatment in the patients of either group (P<0.01, P<0.05), and the results of these evaluations in the observation group were better than those of the control group (P<0.05). After treatment, the temperature difference of the frontal area, the eye area, the zygomatic area and the mouth corner was declined in comparison with that before treatment in the two groups (P<0.05), and the temperature difference in each area in the observation group was lower than that of the control group (P<0.05).The root mean square (RMS) of the frontal muscle group, the zygomatic muscle group and the orbicularis muscle group on the affected side increased in comparison with that before treatment in the two groups (P<0.01), and RMS of the observation group was higher than that of the control group (P<0.05) after treatment. Before treatment, the diameter of the facial nerve on the affected side was larger than that on the healthy side (P<0.01), and after treatment, the diameter on the affected side was reduced when compared with that before treatment in the two groups (P<0.01); the diameter of the facial nerve on the affected side in the observation group was smaller than that of the control group (P<0.05), while, the diameter on the affected side was larger when compared with the healthy side in the control group (P<0.05). The total effective rate of the observation group was 93.3% (28/30), higher than that of the control group (83.3% [25/30], P<0.05). CONCLUSIONS: The staging comprehensive treatment with acupuncture-moxibustion is clearly effective on Bell's facial palsy in the acute stage, which affirms the effectiveness of acupuncture-moxibustion for the acute stage of Bell's facial palsy in comparison with conventional western medication.