[Porphyromonas gingivalis promotes the occurrence of esophageal squamous cell carcinoma via an inflammatory microenvironment].

Objective: To investigate the role of an inflammatory microenvironment induced by Porphyromonasgingivalis (P. gingivalis) in the occurrence of esophageal squamous cell carcinoma (ESCC) in mice. Methods: A total of 180 C57BL/6 mice were randomly divided into 6 groups, i.e. control group, P. gingivalis group, 4NQO group, 4NQO + P. gingivalis group, 4NQO + P. gingivalis + celecoxib group, and 4NQO + P. gingivalis + antibiotic cocktail (ABC, including metronidazole, neomycin, ampicillin, and vancomycin) group, with 30 mice in each group, using the random number table. All mice were normalized by treatment with ABC in drinking water for 2 weeks. In the following 2 weeks, the mice in the control group and the P. gingivalis group were given drinking water, while the other 4 groups were treated with 30 µg/ml 4NQO in the drinking water. In weeks 11-12, the mice in the P. gingivalis group, the 4NQO + P. gingivalis group, the 4NQO + P. gingivalis + celecoxib group, and the 4NQO + P. gingivalis + ABC group were subjected to ligation of the second molar in oral cavity followed by oral P. gingivalis infection thrice weekly for 24 weeks in weeks 11-34. In weeks 13-34, the mice in 4NQO + P. gingivalis+celecoxib group and 4NQO + P. gingivalis + ABC group were administered with celecoxib and ABC for 22 weeks, respectively. At the end of 34 weeks, gross and microscopic alterations were examined followed by RT-qPCR and immunohistochemistry to examine the expression profiles of inflammatory- and tumor-molecules in esophagi of mice. Results: At 34 weeks, 4NQO treatment alone did not affect the foci of papillary hyperproliferation, diseased area, and the thickness of the esophageal wall, but significantly enhanced the foci of hyperproliferation (median 1.00, P＜0.05) and mild/moderate dysplasia (median 2.00, P＜0.01). In addition, the expression levels of IL-6 [8.35(3.45,8.99)], IL-1ß [6.90(2.01,9.72)], TNF-α [12.04(3.31,14.08)], c-myc [2.21(1.80,3.04)], pSTAT3, Ki-67, and pH2AX were higher than those in the control group. The pathological changes of the esophageal mucosa were significantly more overt in the 4NQO + P. gingivalis group in terms of the foci of papillary hyperproliferation (median 2.00), diseased area (median 2.51 mm2), the thickness of the esophageal wall (median 172.52 µm), the foci of hyperproliferation (median 1.00, P＜0.05), and mild/moderate dysplasia (median 1.00, P＜0.01). In mice of the 4NQO + P. gingivalis group, the expression levels of IL-6 [12.27(5.35,22.08)], IL-1ß [13.89(10.04,15.96)], TNF-α [19.56(6.07,20.36)], IFN-γ [11.37(8.23,20.07)], c-myc [2.62(1.51,4.25)], cyclin D1 [4.52(2.68,7.83)], nuclear pSTAT3, COX-2, Ki-67, and pH2AX were significantly increased compared with the mice in the control group. In mice of the 4NQO + P. gingivalis group, the diseased area, invasive malignant foci as well as pSTAT3 and pH2AX expression were significantly blunted by celecoxib. Treatment with ABC markedly reduced the papillary hyperproliferative foci, invasive malignant foci, and pSTAT3 expression but not pH2AX. Conclusions: P. gingivalis promotes the occurrence of esophageal squamous cell carcinoma in mice by inducing an inflammatory microenvironment primed with 4NQO induced DNA damage. Clearance of P. gingivalis with ABC or anti-inflammatory intervention holds promise for prevention of esophageal squamous cell malignant pathogenesis via blockage of IL-6/STAT3 signaling and amelioration of inflammation.

[A study on the hearing protection and intervention effects of silicone earplug usage among manufacturing workers].

Objective: To assess the efficacy of silicone earplugs in protecting workers exposed to noise in a typical manufacturing environment, and to provide training interventions for workers who do not achieve the anticipated noise reduction levels, as well as examining the spectral characteristics of earplug attenuation. Methods: From June to August 2022, a total of 294 noise-exposed workers in two manufacturing enterprises equipped with the same type of earplug were studied by cluster sampling method, by conducting questionnaire surveys, collecting data, fitting tests, and providing trainings, the current noise exposure levels of workers in the industry as well as the perception about the earplug were understood. Additionally, the attenuation before and after intervention in workplace were measured, the spectral characteristics of noise reduction were were described and compared. Results: The percentage of workers with Personal Attenuation Rating (PAR) of 0 is 32.7% (96/294), and the baseline pass rates are all below 60%. There were no significant differences in pass rates based on gender, age, noise exposure, education level, or cognition of earplug effectiveness. After adjusting the way that earplugs are worn or changing the type of earplugs, all workers were able to meet their noise reduction requirements. The median PAR improvement for both companies is above 10 dB. The noise attenuation of the earplug vary with frequency, with lower attenuation at 4 000 Hz and higher attenuation at 8 000 Hz, showing some deviation from the nominal values. Conclusion: The difference between the actual sound attenuation value of earplugs and the nominal value is related to the noise frequency. When using silicone earplugs, attention should be paid to the spectral composition of the noise in the workplace.

[Effect of alar base cinch suture based on anatomic landmarks on the morphology of nasolabial region in patients after orthognathic surgery].

OBJECTIVE: To study the effect of a modified alar base cinch suture (ABCS) based on nasal musculature anatomy on the three-dimensional morphology of nasolabial region in patients after Le Fort Ⅰ osteotomy. METHODS: In the study, 30 patients[11 males and 19 females, with an average age of (23.23±2.98) years]with skeletal Class Ⅲ malocclusion underwent orthognathic surgery between August, 2019 and January, 2020 to have the maxilla advanced no more than 4 mm in the Department of Oral and Maxillofacial Surgery, Peking University School and Hospital of Stomatology were involved and were divided into the test and control groups based on the random number table.In the test group, the nasal musculature was identified and labeled before dissection and the ABCS was according to the label, while in the control group, the nasal musculature was directly sutured and knotted in the midline of nose without prepend labeling.All the patients underwent three-dimensional facial photos preoperatively and 6 months postoperatively by using 3dMD face system.On the three dimensional image, soft tissue landmarks of nasolabial region was identified by the same examiner.Fourteen measurements including straight distance, curve distance, angle and ratio were measured.Statistical analysis was done by using SPSS 22.0. RESULTS: There were significant differences between the two groups in cutaneous height of upper lip (P=0.023) and in nasal tip protrusion-alar width (P=0.012).The increase rate of cutaneous height of upper lip and the decrease rate of nasal tip protrusion-alar width in the control group were significantly higher than that in the test group.The alar width and alar base width of the both groups were significantly increased compared with the preoperative level (P < 0.05).The nasolabial angle in the control group was significantly higher compared with the normal value, while there was no significant difference between the test group and the normal value. CONCLUSION: Compared with the conventional suture method, this modified alar base cinch suture is more favorable for the postoperative nasal coordination and nasolabial morphology in patients who need mild to moderate maxillary advancement, and it has certain advantages in operability and objective accuracy.So it could become a modified and accurate method of alar base cinch suture and be widely applied in clinical practice.

[Effects of the resin base and retention depth on fracture resistance of molars restored with nano-ceramic endocrowns].

OBJECTIVE: To compare the effects of resin base and different retention depth on the fracture resistance of mandibular molars restored with nano-ceramic endocrowns. METHODS: Forty mandibular molars selected and randomly divided into 5 groups: ① The control group which was consisted of intact teeth, ② the non-resin base group, ③ the 2 mm retention depth group, ④ the 3 mm retention depth group, ⑤ the 4 mm retention depth group, respectively. After tooth preparation, in vitro root canal therapy was conducted, which was followed by endocrown design, production and adhesive of groups ②-⑤. All the samples were under load (N) of the universal mechanical testing machine after embedding. The fracture pattern of each sample was observed under stereomicroscope. Then the microstructure of the fracture surface was observed by scanning electron microscopy. RESULTS: The fracture loads of each group were respectively: the control group fracture load was (3 069.34±939.50) N; experimental groups: fracture load of (2 438.04±774.40) N for the group without resin base; fracture load of (3 537.18±763.65) N for the group with 2 mm retention depth. The fracture load of the retention depth 3 mm group was (2 331.55±766.39) N; the fracture load of the retention depth 4 mm group was (2 786.98±709.24) N. There was statistical significance in the effect of resin base and different retention depth on the fracture loads of molars restored with nano-ceramic endocrown (P < 0.05). Repairable fractures in each group were as follows: control group 2/8, non-resin base group 1/8, retention depth of 2 mm group 1/8, retention depth of 3 mm group 2/8, and retention depth of 4 mm group 0/8. The effects of the retention depth and the presence of resin base on the fracture resistance of the resin nano-ceramic endocrowns were statistically significant (P < 0.05). Scanning electron microscopy showed more arrest lines and small twist hackles on the fracture surface of the restorations with resin base (retention depths of 2 mm, 3 mm, and 4 mm), with cracks extending towards the root. In addition to the characteristics above, more transverse cracks parallel to the occlusal surface, pointing outwards from the center of the pulp cavity retention, were also observed on the fracture surface of the non-resin base restorations. CONCLUSION: When molar teeth with nano-ceramic endocrowns are restored, resin base and the retention depth of 2 mm help the teeth to obtain optimal fracture strength.

[Ruxolitinib combined with liposomal doxorubicin, etoposide, methylprednisolone+/-PEG-asparaginase in treatment of relapsed/refractory pediatric hemophagocytic lymphohistiocytosis].

Objective: To investigate the efficacy and safety of ruxolitinib, liposomal doxorubicin, etoposide, methylprednisolone+/-PEG-asparaginase (RU-DEP+/-L) in the treatment of relapsed/refractory (R/R) pediatric hemophagocytic lymphohistiocytosis (HLH). Methods: The clinical data of R/R pediatric HLH, who accepted the RU-DEP+/-L regimen at Beijing Children's Hospital from January 2018 to December 2019 was retrospectively analyzed. Results: A total of 16 patients were included in this study, including 13 males and 3 females, aged[M(Q1,Q3)] 1 (1, 2) years at diagnosis. Thirteen patients were diagnosed with Epstein-Barr virus (EBV)-HLH, 2 with EBV-induced primary HLH, and 1 with unclear etiology, among which 3 patients were co-infected with CMV. After the first-line treatment, 11 patients had no response, and 5 patients relapsed after complete response. Nine patients received the RU-L-DEP regimen, and 7 patients received the RU-DEP regimen. The overall response rate and complete response of RU-DEP+/-L treatment were 10/16 and 3/16, respectively. The negative conversion rate of plasma EBV-DNA was 7/15. The median follow-up time was 35.1 (2.4, 40.7) months, and 9/16 patients were survival. The 3-year overall survival rate after RU-DEP+/-L treatment in response and accepted hematopoietic stem cell transplantation (HSCT) was higher than that without response and did not receive HSCT (P=0.048). Among the 16 patients, 9 had varying degrees of myelosuppression, and 13 had an infection. Conclusions: RU-DEP+/-L can be used as a salvage treatment in R/R pediatric HLH, which can provide a bridge to HSCT and play an important role in the control of HLH. The main adverse reactions are myelosuppression and infection, which can be tolerated.

[Epidemiological characteristics of infectious diseases of group A, B and C among Chinese students' population].

OBJECTIVE: To analyze the secular trend, ranking change, age- and regional- characteristics of leading infectious diseases among Chinese students population aged 6 to 22 years from 2008 to 2017. METHODS: Data were drawn from the national surveillance from 2008 to 2017, and the participants were students aged from 6 to 22 years who were diagnosed with notifiable infectious diseases. A total of 40 infectious diseases were classified into three groups based on national notifiable infectious diseases classification of A, B and C. The morbidity and mortality rates from infectious diseases were calculated using the numbers of students published by the ministry of education as the denominator. The age- and province-specific infectious diseases with the highest incidence were selected as the leading infectious diseases for analysis. RESULTS: From 2008 to 2017, the incidence rate, the number of cases and the number of deaths of infectious diseases among the boys aged 6-22 years in China were higher than that of the girls, and the overall trend was downward during the study period. The incidence rates in the boys and girls decreased from 2008 to 2015 with decrease of 43.4% and 40.1%, respectively. However, by 2017, the increase rate rebounded with the increases of 47.1% and 53.8%. The rebound trend was mainly caused by the increase of group C of infectious diseases. During the past decade, the top leading three diseases of groups A and B of infectious diseases were viral hepatitis, tuberculosis and dysentery in 2018, respectively, which changed to tuberculosis, scarlet fever and viral hepatitis in 2017. The top leading three infectious diseases in terms of mortality were rabies, tuberculosis, and human immunodeficiency virus (HIV)/acquired immune deficiency syndrome (AIDS) in 2008, which were transformed into HIV/AIDS, rabies, and tuberculosis in 2017. There was no significantly obvious change in the incidence and mortality order of group C of infectious diseases during the decade. In the analysis of age groups and regions, the leading infectious diseases in groups A and B transferred from viral hepatitis to scarlet fever and tuberculosis, while in group C, mumps and infectious diarrhoea almost always dominated the leading infectious diseases. But in recent years, influenza and hand-foot-and-mouth disease increased significantly in the eastern region. CONCLUSION: During the past decade, China has got remarkable achievements in the prevention and control of children infectious disease. However, the change patterns and characteristics of notifiable infectious diseases among children and adolescents show the urgent need for prevention and control of respiratory tract infectious diseases, HIV/AIDS and other sexually transmitted diseases as well as new emerging infectious diseases in China in the future. This study provides important basis for policy making of Chinese national school-based infectious disease prevention and control mechanism.

Functional cell phenotype induction with TGF-ß1 and collagen-polyurethane scaffold for annulus fibrosus rupture repair.

Appropriate cell sources, bioactive factors and biomaterials for generation of functional and integrated annulus fibrosus (AF) tissue analogues are still an unmet need. In the present study, the AF cell markers, collagen type I, cluster of differentiation 146 (CD146), mohawk (MKX) and smooth muscle protein 22α (SM22α) were found to be suitable indicators of functional AF cell induction. In vitro 2D culture of human AF cells showed that transforming growth factor ß1 (TGF-ß1) upregulated the expression of the functional AF markers and increased cell contractility, indicating that TGF-ß1-pre-treated AF cells were an appropriate cell source for AF tissue regeneration. Furthermore, a tissue engineered construct, composed of polyurethane (PU) scaffold with a TGF-ß1-supplemented collagen type I hydrogel and human AF cells, was evaluated with in vitro 3D culture and ex vivo preclinical bioreactor-loaded organ culture models. The collagen type I hydrogel helped maintaining the AF functional phenotype. TGF-ß1 supplement within the collagen I hydrogel further promoted cell proliferation and matrix production of AF cells within in vitro 3D culture. In the ex vivo IVD organ culture model with physiologically relevant mechanical loading, TGF-ß1 supplement in the transplanted constructs induced the functional AF cell phenotype and enhanced collagen matrix synthesis. In conclusion, TGF-ß1-containing collagen-PU constructs can induce the functional cell phenotype of human AF cells in vitro and in situ. This combined cellular, biomaterial and bioactive agent therapy has a great potential for AF tissue regeneration and rupture repair.

An evaluation of direct PCR assays for the detection and quantification of Porphyromonas gingivalis.

Porphyromonas gingivalis has been linked to the development and progression of oesophageal squamous cell carcinoma (ESCC), and is considered to be a high-risk factor for ESCC. Currently, the commonly used methods for P. gingivalis detection are culture or DNA extraction-based, which are either time and labour intensive especially for high-throughput applications. We aimed to establish and evaluate a rapid and sensitive direct quantitative polymerase chain reaction (qPCR) protocol for the detection of P. gingivalis without DNA extraction which is suitable for large-scale epidemiological studies. Paired gingival swab samples from 192 subjects undergoing general medical examinations were analysed using two direct and one extraction-based qPCR assays for P. gingivalis. Tris-EDTA buffer-based direct qPCR (TE-direct qPCR), lysis-based direct qPCR (lysis-direct qPCR) and DNA extraction-based qPCR (kit-qPCR) were used, respectively, in 192, 132 and 60 of these samples for quantification of P. gingivalis. The sensitivity and specificity of TE-direct qPCR was 95.24% and 100% compared with lysis-direct qPCR, which was 100% and 97.30% when compared with kit-qPCR; TE-direct qPCR had an almost perfect agreement with lysis-direct qPCR (κ = 0.954) and kit-qPCR (κ = 0.965). Moreover, the assay time used for TE-direct qPCR was 1.5 h. In conclusion, the TE-direct qPCR assay is a simple and efficient method for the quantification of oral P. gingivalis and showed high sensitivity and specificity compared with routine qPCR.

Evaluation of synuclein-γ levels by novel monoclonal antibody in saliva and cancer tissues from oral squamous cell carcinoma patients.

The clinical value of synuclein-γ (SNCG) in oral squamous cell carcinoma (OSCC) was evaluated by detecting the expression of SNCG in saliva and tissues and its correlation with clinicopathological parameters (age, gender, ethnicity, degree of differentiation, clinical stage, and lymph node metastasis). Salivary samples were collected from 79 patients with OSCC, 31 patients with oral premalignant lesions (OPMLs), such as oral lichen planus, oral leukoplakia, and erythema, and 80 controls, and levels of SNCG in salivary samples were determined by enzyme-linked immunosorbent assay (ELISA). Tissue expression in formalin-fixed tissue biopsies of 94 cases of OSCC and 30 adjacent normal tissues was analyzed by immunohistochemistry (IHC) using an antibody against SNCG. The results showed that the salivary levels of SNCG in patients with OSCC and OPMLs were significantly higher than those detected in the control group (p<0.001). The immunohistochemical results showed that SNCG was highly expressed in tumor cells of OSCC patients, with low expression in the adjacent normal epithelium (p<0.001, OR=6.074). Salivary SNCG level correlated with differentiation (p=0.022). Besides, the expression of SNCG in OSCC tissues was also significantly associated with differentiation (p<0.001).

[Evaluation of mandibular stability and condylar volume after orthognathic surgery in patients with severe temporomandibular joint osteoarthrosis].

OBJECTIVE: To investigate the effect of preoperative condylar condition for mandible retrognathism deformities with severe temporomandibular joint osteoarthrosis on the stability of the jaw after orthognathic surgery and on the postoperative condylar volume changes. METHODS: In this retrospective study, from 2014 to 2019, 37 patients including 1 male and 36 female, aged between 21 to 34 years old with an average age of (28.03±6.52) years, were diagnosed with mandible retrognathism deformities with severe temporomandibular joint osteoarthrosis by Peking University School and Hospital of Stomatology and received orthognathic surgery, meeting the inclusion criteria were included. According to the preoperative condylar condition. There were divided into smooth group and non-smooth group, the lateral cephalometric films 1 week (T0), 3 months (T1), 6 months (T2) and 1 year (T3) after surgery were used to establish the coordinate system and cephalometric analysis to determine the stability of the jaw after operation. The three-dimensional model of the condyle was segmented by cone beam computed tomography (CBCT) 1 week (T0), 3 months (T1), 6 months (T2) and 1 year (T3) after surgery and the volume was obtained to evaluate the change of the condyle volume after surgery. CBCT image data was used to evaluate the changes of the condylar condition after surgery, and to clarify the correlation between the postoperative condylar condition and jaw stability. SPSS 20.0 statistical software was used for statistical analysis, Fisher's exact probability methods were used to compare whether there were statistically significant differences in the stability of the mandibular joint at stages T1, T2 and T3 with different preoperative condylar condition.Spearman correlation coefficient analysis and Mann-Whitney test were used to compare whether there were statistically significant differences in the volume changes at stages T1, T2 and T3 after surgery between the two groups. RESULTS: The recurrence rates of the mandible in the condylar smooth group were T1 36.85%, T2 47.37% and T3 42.11%, respectively. The recurrence rates in the non-smooth condylar group were T1 27.78%, T2 44.44% and T3 55.56%, respectively. There was no statistical difference in the recurrence rates between the two groups at different time points. There was no significant difference in the condylar volume change between smooth group and non-smooth group. CONCLUSION: For patients with mandible retrognathism deformities with severe temporomandibular joint osteoarthrosis and no significant changes in the condyle observed for one year before surgery, there is no difference in the influence of the preoperative condylar condition on the stability of jaw after operation, and no definite influence on the volume of the condyle after operation. Condylar resorption 3 months after surgery can cause instability of the jaw after orthognathic surgery.

[Feasibility of Delaire cephalometric analysis to predict the ideal sagittal position of the maxilla and chin for surgery-first patients in orthognathic surgery].

OBJECTIVE: There is no universally accepted method for determining the ideal sagittal position of the maxilla in orthognathic surgery. The purpose of this study was to compare how well the Delaire's cephalometric analysis correlated with postoperatively findings in patients who underwent orthognathic surgery planned using other cephalometric analyses, as well as to evaluate the feasibility of the Delaire's cephalometric analysis in predicting the ideal sagittal position of the maxilla and chin. METHODS: In the study, 35 patients with skeletal Class III malocclusion were involved and met the criteria. Treatment plans were developed using photographs, 3-D photographs, radiographs, and standard cephalometric measurements. The Delaire's cephalometric analysis data, like the phase measurements (∠C1-L1 and ∠C1-L2) of the sagittal positions of the maxillary and the chin separating the reference line (L1) of NP point and the reference line (L2) of Me point, were analyzed using Dolphin Imaging software. At the same time, the analyses on standard measurements were also performed. Four orthognathic doctors, 4 orthodontic doctors and 4 college students from non-medical majors were selected as aesthetic evaluators to assess the patients' profile aesthetic by visual analogue scale (VAS). The results through the Delaire's cephalometric analysis were statistically compared with that through standard methods. RESULTS: The mean of ∠C1-L1 was 83.93°±2.99° and∠C1-L2 was 89.08° ±2.48° for males postoperatively, and 85.67° ±3.60° and 88.30° ±4.20° for females postoperatively. Compared with the reference values of Chinese goodlooking people, there was no significant difference of NP point, whereas there was a significant difference of Me point. The postoperative aesthetic scores were: the mean was 6.71±0.25 of upper jaws, 6.81±0.30 of chins and 6.90±0.29 of the overall for males; and 7.19±0.22, 7.26±0.34 and 7.39±0.29 for females. Compared with preoperative scores, there was a significant improvement. Furthermore, the scores of chins and the overall scores were related to the sagittal position of the chins. CONCLUSION: Compared with standard cephalometric analysis, the Deliare's cephalometric analysis well unravel the preoperative deformity and the final esthetic sagittal positions of maxillary and chin in the present sample, and could be a useful tool for the planning of surgery-first approach in orthognathic surgery.

[Application of biocopy function of temporary crown occlusal morphology in patients with severe attrition].

OBJECTIVE: To explore the preliminary application of "biocopy function" in digital technology of temporary crown in severe tooth attrition, so as to reduce the difficulty of final restoration adjustment in severe tooth wear cases, and save clinical time. METHODS: Twelve patients aged between 40 and 65 years with severe tooth attrition were recruited in this study. The experimental group (6 cases, 3 females and 3 males) used the method of digital copy of temporary restoration shape when making the final restoration, and the control group (6 cases, 3 females and 3 males) used the traditional method to make the final restoration. The mean time of central occlusal adjustment and protrusive and lateral occlusal adjustment of each crown, the number of follow-up visits of the patients were recorded and statistically analyzed. The occlusal comfort of the first and the third months after wearing the prosthesis was evaluated by the patients, and the difference of the occlusal comfort of the final prosthesis made by the two methods was compared (the full score was 10 points). The occlusal adjustment time and occlusal comfort score were used as measurement data. Single sample t test was used. The number of follow-up visits was count data. Rank sum test was used for non-normal continuous variables. RESULTS: The mean occlusal time of each crown adjustment in the experimental group was significantly lower than that in the control group (P < 0.01), and the median number of follow-up visits in the experimental group was lower than that in the control group (P < 0.01). The average occlusal comfort score of the experimental group was higher than that of the control group at the first time (P < 0.01). After three months of crown wearing, the median occlusal comfort score of the experimental group was higher than that of the control group (P < 0.05). CONCLUSION: In the case of severe tooth attrition, it is feasible to use the "biocopy function" in the design software to design the final prosthesis, which is conducive to reduce the difficulty of adjustment and achieve predictable functional and aesthetic effects, which is of great significance to save clinical time and improve the accuracy of restoration.

[Five million wear simulation and particle analysis of carbon-based nano-multilayer coatings titanium alloy femoral head].

Objective: To analyze the wear debris characteristics ofcarbon-based nano- multilayer coatings on Ti(6)Al(4)V alloys and compared with the cobalt chromium molybdenum alloy (CoCrMo) femoral head to evaluate the friction and wear performance of the new coated femoral head. Methods: Three groups were set up in the wear simulation experiment according to the type of femoral head. Group A: imported Cobalt-Chromium-Molybdenum alloy femoral head (CoCrMo); group B: Titanium alloy femoral head (Ti(6)Al(4)V) with carbon-based nano-multilayer coatings; group C: domestic Cobalt-Chromium-Molybdenum alloy femoral head (CoCrMo). All heads were jointed with an ultra-high molecular weight polyethylene (UHMWPE) acetabular cup. Serum samples were collected and stored in the hip joint simulator. After the sample has been digested and diluted, it was filtered through 5 µm, 1.2 µm and 0.4 µm filters, and the filter paper was collected for testing. Scanning electron microscope (SEM) was used to randomly select regions on the filter to obtain images of wear debris. Energy dispersive X-ray spectroscopy (EDS) was used to determine the elemental type of the particle and to eliminate possible contamination. The composition and structure of the abrasive chips were measured using Fourier transform infrared spectrometer (FTIR). The parameters related to the wear debris includingparticle size, shape, number and volume were calculated. The differences in correlation parameters between the groups were compared to evaluate the friction and wear properties of the new coated joints. Results: The main component of the wear debris produced was UHMWPE, and the particle size was mostly below 1 µm. The submicron particle ratio of group B was 49.4%, which was significantly lower than that of the group A and C (75% and 60%, respectively; χ(2)=66.032, 31.754, both P<0.017). The shape was mainly round, and there was no statistical difference between the groups (χ(2)=0.590, P=0.744). The number of particles in group B was significantly less than that of group C on all filters (t=9.960, 8.019, 5.790, all P<0.01), and less than group A on the 0.4 µm filter (t=7.810, P=0.000). Conclusion: The frictional wear performance of the new carbon-based nano-multilayer coatings femoral head is significantly better than that of the domestic femoral head, and even partially exceeds the imported femoral head level, which helps to reduce the production of particles and prevent osteolysis and aseptic loosening induced by UHMWPE particles.

WNT3A accelerates delayed alveolar bone repair in ovariectomized mice.

Our goal was to evaluate alveolar bone healing in OVX mice, and to assess the functional utility of a WNT-based treatment to accelerate healing in mice with an osteoporotic-like bony phenotype. INTRODUCTION: Is osteoporosis a risk factor for dental procedures? This relatively simple question is exceedingly difficult to answer in a clinical setting, for two reasons. First, as an age-related disease, osteoporosis is frequently accompanied by age-related co-morbidities that can contribute to slower tissue repair. Second, the intervals at which alveolar bone repair are assessed in a clinical study are often measured in months to years. This study aimed to evaluate alveolar bone repair in ovariectomized (OVX) mice and provide preclinical evidence to support a WNT-based treatment to accelerate alveolar bone formation. METHODS: OVX was performed in young mice to produce an osteoporotic-like bone phenotype. Thereafter, the rate of extraction socket healing and osteotomy repair was assessed. A liposomal WNT3A treatment was tested for its ability to promote alveolar bone formation in this OVX-induced model of bone loss. RESULTS: Bone loss was observed throughout the murine skeleton, including the maxilla, and mirrored the pattern of bone loss observed in aged mice. Injuries to the alveolar bone, including tooth extraction and osteotomy site preparation, both healed significantly slower than the same injuries produced in young controls. Given sufficient time, however, all injuries eventually healed. In OVX mice, osteotomies healed significantly faster if they were treated with L-WNT3A. CONCLUSIONS: Alveolar bone injuries heal slower in OVX mice that exhibit an osteoporotic-like phenotype. The rate of alveolar bone repair in OVX mice can be significantly promoted with local delivery of L-WNT3A.

Efficacy of triamcinolone-soaked polyglycolic acid sheet plus fully covered metal stent for preventing stricture formation after large esophageal endoscopic submucosal dissection.

Esophageal stricture is a major problem for patients with large superficial esophageal squamous cell neoplasms (SESCNs) after endoscopic submucosal dissection (ESD). Although many measures could be used as prophylaxis for post-ESD strictures, a well-accepted method has not yet been established. We propose using a triamcinolone-soaked polyglycolic acid sheet plus fully covered metal stent (TS-PGA+FCMS) as a novel method to prevent stricture formation after large esophageal ESD. From June 2016 to May 2017, nine patients with SESCNs (≥3/4 of the esophageal circumference) who underwent TS-PGA+FCMS placement immediately after ESD and did not require additional surgical resection were enrolled in this case series. All stents were removed 4-6 weeks post-ESD. The sizes of mucosal defects in 9 patients were 3/4 (n = 1), 4/5 (n = 2), 1/1 (n = 6). The average size of resection was 90.0 mm (range: 60-140 mm). The incidence of stricture was 33.3% (3/9) of patients. No stricture occurred in 3 patients with noncircumferential resection, while stricture occurred in 50% (3/6) patients with circumferential resection. The median number of EBD sessions was 4 (range: 3-4 sessions). No adverse events or recurrences were observed during the median follow-up period of 15.2 months (range: 12-22 months). The TS-PGA+FCMS method is safe and may decrease the incidence of esophageal stricture and the number of EBD sessions after large esophageal ESD.

[Establishment of three-dimensional measurement methods of nasolabial soft tissue for patients with maxillary protrusion].

OBJECTIVE: To establish a series of three-dimensional measurement methods of nasolabial soft tissue for maxillary protrusion patients by using 3dMD camera, and to evaluate preoperative and postoperative changes of the nasolabial soft tissue. METHODS: Three-dimensional facial photos of 30 female patients with maxillary protrusion [average age, (27.33±2.54) years] were taken by 3dMD camera preoperatively and at the end of postoperative 6 months or more. Then, 3dMD patient software was used to locate the selected landmarks at nasolabial region on the three-dimensional photos. Ten measurements, including soft tissue line distance, angle, curve distance and postoperative three-dimensional volume changes were measured twice with one week interval by 3 investigators, respectively. A standard consistency test calculated by the correlation coefficients (ICC) was performed between two sets of data (including all of the 10 measurements) for each investigator and among the three investigators to verify the repeatability. RESULTS: The average maxillary incisor retraction distance of the 30 subjects was (5.13±0.99) mm, and the average follow-up time was (11.07±5.11) months. The standard consistency test was performed between the two sets of data for each investigator, and the correlation coefficients (ICC) of the 10 measurements were all over 0.8 for each investigator (P>0.05). The standard consistency test was performed among the three surveyors, with the result that the ICC of the width of the bilateral inner canthus, the height of the nose, the height of nasal tip, nasolabial angle, philtrum length, the curve height of upper vermilion and the height of upper lip were greater than 0.8 (P>0.05), and the ICC of the distance between SbalSbal, length of nasal dorsum and three-dimensional volume change of upper lip were 0.680, 0.627 and 0.528, respectively (P>0.05). CONCLUSION: 3dMD camera and 3dMD patient software can be used to measure and analyze the three-dimensional morphology of the nasolabial soft tissue for patients with maxillary protrusion preoperatively and postoperatively, and it is relatively accurate and reliable. However, the repeatability of three-dimensional positioning of the nasal tip point and the Sbal is slightly worse resulting in the lower value of the ICC of the distance between SbalSbal and length of nasal dorsum, as well as the upper lip three-dimensional volume change after the operation.

[Accuracy analysis of computer assisted navigation for condylectomy via intraoral approach].

OBJECTIVE: To explore the application accuracy of virtual preoperative plan after the condylectomy via intraoral approach under computer assisted surgical navigation, and to analyze the location and cause of the surgical deviation to provide reference for the surgical procedure improvement in the future. METHODS: In the study, 23 cases with condylar hypertrophy (11 with condylar osteochondroma and 12 with condylar benign hypertrophy) in Department of Oral and Maxilloficial Surgery, Peking University School and Hospital of Atomatology from December 2012 to December 2016 were treated by condylectomy via intraoral approach under computer assisted surgical navigation. The patient's spiral CT data were imported into ProPlan software before operation, and the affected mandibular ramus was reconstructed three-dimensionally. The condylar osteotomy line was designed according to the lesion range, and the preoperative design model was generated and introduced into the BrainLab navigation system. Under the guidance of computer navigation, the intraoral approach was used to complete the condylar resection according to the preoperative design of the osteotomy line. Cranial spiral CT of the craniofacial region was taken within one week after operation. three-dimensional reconstruction of the mandibular ramus at the condylectomy side was performed, and the condylar section was divided into six segments (anterolateral, anterior, anteromedial, posteromedial, posterior, and posterolateral) and the corresponding regional measurement points P1 to P6 were defined. Then the preoperative virtual model and the postoperative actual model were matched by Geomagic studio 12.0 to compare the differences and to analyze the accuracy of the operation. RESULTS: All the patients had successfully accomplished the operation and obtained satisfactory results. Postoperative CT showed that the condyle lesion was completely resected, and the condylar osteotomy line was basically consistent with the surgical design. No tumor recurrence or temporomandibular joint ankylosis during the follow-up period. The postoperative accuracy analysis of the condylar resection showed that the confidence intervals measured by the six groups of P1 to P6 were (-2.26 mm, -1.89 mm), (-2.30 mm, -1.45 mm), (-3.37 mm, -2.91 mm), (-2.83 mm, -1.75 mm), (-1.13 mm, 0.99 mm), and(-1.17 mm, 0.17 mm), where P3 group was different from the other 5 groups. There was no significant difference between the P5 and P6 groups and the difference between the other four groups was statistically significant. CONCLUSION: Under the guidance of computer navigation, the intraoral approach can be performed more accurately. The surgical deviation of each part of the osteotomy surface is mainly due to excessive resection. The anterior medial area of the anterior medial condyle represents the most excessive resection. The posterior and posterior lateral measurement points represent the posterior condylar area. The average deviation is not large, but the fluctuation of the deviation value is larger than that of the other four groups. The accuracy of computer-assisted subtotal resection has yet to be improved.

[Analysis of the clinical features and misdiagnosis reasons of 17 patients misdiagnosed with IgG4-related disease].

OBJECTIVE: To summarize the clinical characteristics of patients misdiagnosed with IgG4-related disease, to analyze the reasons of misdiagnosis and to improve the clinical recognition of the disease. METHODS: The general data, clinical manifestations, laboratory examination results and pathological features of 17 patients with IgG4-related diseases misdiagnosed outside the hospital were retrospectively analyzed. RESULTS: Among the 17 patients, there were 9 males and 8 females with a median age of 45 years, and the median time from onset to diagnosis was 12 months. Most patients' initial admission department was not rheumatology or immunology department. Six of the 17 patients were eventually diagnosed with lymphoproliferative disease, 4 with autoimmune disease, and 2 with infectious disease, Rosai Doffman disease, desmofibromatosis, highly differentiated mucoepidermoid carcinoma of the bottom of the mouth, hypereosinophilic syndrome, asthma and allergic rhinitis in 1 case each. The typical sites of IgG4-related disease were involved in 14 patients, including 6 cases of parotid gland, 2 cases of submandibular gland, 3 cases of pancreas and 2 cases of retroperitoneal lesions. Serum IgG4 was elevated in 10 patients, serum IgG4/IgG value was higher than 10% in 7 patients, serum IgE was increased in 7 patients, complement was decreased in 4 patients, and eosinophilic granulocytes were increased in 3 patients. Pathological biopsy was performed in 15 patients, and infiltration of lymphocyte was observed in 10 patients, IgG4+ plasma cells were present in 5 patients, the ratio of IgG4+ plasma cells to IgG+ plasma cells was less than 40% in 4 patients and greater than 40% in 1 patient. However, none of the 15 patients had the storiform pattern of fibrosis and obliterative phlebitis. CONCLUSION: A variety of diseases can perform as IgG4-related disease witih typical sites involved, elevated serum IgG4, even can be characterized by pathological IgG4+ plasma cells infiltration. Physicians should pay attention to the differential diagnosis and comprehensively evaluate the patient's clinical manifestations, and laboratory results. Timely and even repeated pathological biopsy is also needed for definite diagnosis.

[Preliminary clinical application of complete digital workflow of design and manufacturing occlusal splint for sleep bruxism].

OBJECTIVE: To establish a complete workflow of digital design and manufacturing occlusal splint for sleep bruxism, which can be preliminarily applied in clinical use, thus observe the clinical efficacy. METHODS: Twenty-four patients with sleep bruxism were recruited in the study and randomly divided into two groups by using random number tables. Digital-occlusal-splint (experimental group) treatment plan and traditional-occlusal-splint (control-group) treatment plan were carried out for each group, respectively. For experimental group, digital models of patients' both dental arches and the occlusion relationship after elevation were captured using an intraoral scanner. The occlusal splint was carried out by computer aided design/computer aided manufacturing (CAD/CAM), including splint designing and milling. For control group, the traditional soft occlusal splint was fabricated by vacuum laminator. The two kinds of occlusal splints were tried in the patients from each group, and the occlusal contacts were tested respectively by T-scan analysis system, which recorded the changes of occlusal indicators in the two groups. The retention, appearance and occlusal comfort degree were evaluated by the two groups of patients. Mann-Whitney test was performed with IBM SPSS 20.0 software, and bilateral test was performed. P<0.05 was considered to be statistically significant. RESULTS: The complete workflow of digital design and manufacturing occlusal splint was successfully established. During the clinical use, there was no statistical difference in the retention evaluation of two kinds of occlusal splints between the two groups of patients (Z=-0.538, P=0.590). The appearance score (Z=2.038, P=0.042) and the occlusal comfort score (Z=-2.579, P=0.010) of the experimental group were higher than those of the control group, with statistically significant differences. The T-scan analysis results showed that only the second molar on both sides of the traditional occlusal splint had occlusal contact in intercupsal position, while the digital occlusal splint had stable and bilaterally balanced contact between the maxillary and mandibular teeth. Furthermore, the occlusal force was uniformly distributed in the experimental group. CONCLUSION: The complete workflow of digital occlusal splint improves the occlusal design, greatly simplifies and optimizes the traditional process of making occlusal splint. This new method is resource-saving and environmental-friendly, and it is able to serve patients more conveniently and efficiently.

A modification and validation of quantitative morphometry classification system for osteoporotic vertebral compressive fractures in mainland Chinese.

This study described a modified quantitative morphometry (mQM) system adapted to specific reference values for Mainland Chinese population. The mQM system is validated using the Genant Semiquantative system and is sensitive for detecting vertebral height changes and predicting cement leakage after percutaneous kyphoplasty (PKP) in patients with osteoporotic vertebral compressive fracture (OVCF). INTRODUCTION: OVCF is a manifestation of osteoporosis. To improve clinical management of osteoporosis, the quantitative morphometry (QM) system has been widely used for the early diagnosis and precise classification of OVCF in developed countries. Here, we present an mQM system and validated its use in detecting OVCF in Mainland Chinese. METHODS: Using our mQM system, the pre- and post-operative values of vertebral heights were measured and evaluated in 309 Mainland Chinese who received percutaneous kyphoplasty (PKP) as OVCF treatment. Measurements and classification of fractures from the mQM system were validated by comparing to values obtained by the Genant semiquantative (SQ) method. Moreover, we evaluated the sensitivity of the mQM system by its ability to detect restoration of vertebral heights and predict cement leakage after PKP. RESULTS: The five classification of fractures, No deformity (ND), anterior wedge (AW), posterior wedge (PW), biconcavity (BC), and compression (CP), evaluated by the mQM method shared similar distribution characteristics compared to those obtained by the SQ method. In addition, mQM evaluation showed that the vertebra height of all fracture types showed significant restoration after PKP. The incidence of cement leakage was most common in CP (37.5%), followed by AW (31.6%), BC (26.5%), ND (23.7%), and PW (0.0%). CONCLUSIONS: Our mQM system is suitable for classification of fractures, detection of vertebral height restoration, and correlation of cement leakage after PKP in Mainland Chinese population.