Saliva biopsy: Detecting the difference of EBV DNA methylation in the diagnosis of nasopharyngeal carcinoma.

Saliva sampling is a non-invasive method, and could be performed by donors themselves. However, there are few studies reporting biomarkers in saliva in the diagnosis of NPC. A total of 987 salivary samples were used in this study. First, EBV DNA methylation was profiled by capture sequencing in the discovery cohort (n = 36). Second, a q-PCR based method was developed and five representative EBV DNA CpG sites (11 029 bp, 45 849 bp, 57 945 bp, 66 226 bp and 128 102 bp) were selected and quantified to obtain the methylated density in the validation cohort1 (n = 801). Third, a validation cohort2 (n = 108) was used to further verify the differences of EBV methylation in saliva. A significant increase of EBV methylation was found in NPC patients compared with controls. The methylated score of EBV genome obtained by capture sequencing could distinguish NPC from controls (sensitivity 90%, specificity 100%). Further, the methylated density of EBV DNA CpG sites revealed by q-PCR showed a good diagnostic performance. The sensitivity and specificity of detecting a single CpG site (11 029 bp) could reach 75.4% and 99.7% in the validation cohort1, and 78.2% and 100% in the validation cohort2. Besides, the methylated density of the CpG site was found to decrease below the COV in NPC patients after therapy, and increase above the COV after recurrence. Our study provides an appealing alternative for the non-invasive detection of NPC without clinical setting. It paves the way for conducting a home-based large-scale screening in the future.

Prevalence of early childhood caries in three regions of China: A cross-sectional study.

BACKGROUND: The burden of early childhood caries (ECC) in different regions of China with different levels of economic development has been of interest to policymakers and public health workers. AIM: To investigate regional differences in ECC prevalence in China and to identify associated risk factors. METHODS: A total of 11 612 three- to five-year-old children from three geographic regions of China were included in this cross-sectional study. The dmft index was assessed for each child. A questionnaire regarding children's dietary habits, oral health behaviors, parents' socioeconomic status, and attitudes toward oral health was administered. Odds ratios and 95% confidence intervals were calculated to evaluate associated factors. RESULTS: Caries prevalence in the Eastern, Central and Northwestern regions of China was 63.4% (95% CI: 61.4%-64.5%), 59.4% (95% CI: 58.6%-61.7%), and 59.0% (95% CI: 58.5%-61.6%), respectively. Children from the Northwestern (OR = 0.83, 95% CI: 0.75-0.92) and Central (OR = 0.83, CI: 0.75-0.92) regions of China had a lower risk of experiencing ECC. Dietary habits and parents' specific oral health knowledge and attitudes were associated with ECC. CONCLUSIONS: Differences in ECC prevalence were found in the three regions of China. Multiple factors were associated with ECC. Overall, the burden of ECC was heavy in the examined regions.

Computer-designed surgical templates improve the extraction of impacted supernumerary teeth in the hard palate.

OBJECTIVES: The surgical procedure of bony impacted supernumerary teeth (SNT) in hard palate is commonly done with poor visualization and uncomfortable posture. This study aims to introduce our primary practice of presurgical evaluation and guiding exodontia of bony impacted supernumerary teeth (SNT) in the hard palate to reduce surgical trauma, duration and uncertainty. STUDY DESIGN: Twelve patients with impacted supernumerary teeth in hard palate were included. Intraoral scan and the three-dimensional (3D) reconstruction of the cone beam computed tomography (CBCT) file was superimposed, and virtual simulation of flap elevation and osteotomy was conducted on the rebuilt 3D model. A couple of surgical templates were designed with surgical planning software Mimics, fabricated by a 3D printer and were used to guide the extraction of the impacted SNT. RESULTS: The surgical templates fitted well to the teeth and operation site. All the impacted SNTs were accurately located and extracted without damaging the adjacent vital anatomical structures. All patients had an uneventful postoperative recovery without infection or sensory disturbance. CONCLUSIONS: The application of 3D printed surgical templates reduced trauma and increased the accuracy and predictability of surgical extraction of bony impacted SNT in hard palate. The results of this study increased the accuracy and predictability of surgical extraction of bony impacted SNT in hard palate, and reduced the surgeon's embarrassment and surgical trauma because of location difficulty.

Sec62 Suppresses Foot-and-Mouth Disease Virus Proliferation by Promotion of IRE1α-RIG-I Antiviral Signaling.

Foot-and-mouth disease virus (FMDV) is highly infectious and causes a major plague in animal farming. Unfolded protein response is one of the major cellular responses to pathogenic infections, which performs a crucial role in cell survival, apoptosis, and antiviral innate immune response. In this study, we showed that FMDV infection activated two unfolded protein response branches (PERK-eIF2α and ATF6 signaling) in both baby hamster kidney cells (BHK-21) and porcine kidney (PK-15) cells, whereas it suppressed the IRE1α-XBP1 signaling by decreasing IRE1α level. Further study revealed IRE1α signaling as an important antiviral innate immune mechanism against FMDV. Sec62, the transport protein, was greatly decreased at the late stages of FMDV infection. By overexpression and knockdown study, we also found that the expression of Sec62 was positively involved in the levels of IRE1α and RIG-I and subsequent activation of downstream antiviral signaling pathways in FMDV-infected PK-15 cells. Taken together, our study demonstrates that Sec62 is an important antiviral factor that upregulates IRE1α-RIG-I-dependent antiviral innate immune responses, and FMDV evades antiviral host defense mechanism by downregulating Sec62-IRE1α/RIG-I.

Caproyl-Modified G2 PAMAM Dendrimer (G2-AC) Nanocomplexes Increases the Pulmonary Absorption of Insulin.

We aimed to investigate the absorption-enhancing effect (AEE) of caproyl-modified G2 PAMAM dendrimer (G2-AC) on peptide and protein drugs via the pulmonary route. In this study, G2 PAMAM dendrimer conjugates modified with caproic acid was synthesized, the pulmonary absorption of insulin as models with or without G2-AC were evaluated. The results indicated that G2-AC6 exhibited a greatest AEE for insulin in various caproylation levels of G2-AC. G2-AC6 could significantly enhance the absorption of insulin, and the AEE of G2-AC6 was concentration-dependent. In toxicity tests, G2-AC6 displayed no measurable cytotoxicity to the pulmonary membranes over a concentration range from 0.1% (w/v) to 1.0% (w/v). Measurements of the TEER and permeability showed that G2-AC6 significantly reduced the TEER value of CF and increased its Papp value. The results suggested that G2-AC6 could cross epithelial cells by means of a combination of paracellular and transcellular pathways. These findings suggested G2-AC6 at lower concentrations (below 1.0%, w/v) might be promising absorption enhancers for increasing the pulmonary absorption of peptide and protein drugs.

Profiling of Oral and Nasal Microbiome in Children With Cleft Palate.

OBJECTIVE: To identify the oral and nasal microbial profile of cleft palate children and control children and to reveal interrelationships between the microbiome and the high prevalence of infectious diseases. DESIGN: Saliva and nasal samples of 10 cleft palate children and 10 age-matched control children were analyzed. Total microbial genomic DNA was isolated, polymerase chain reaction-denaturing gradient gel electrophoresis was applied to obtain fingerprints, and selected bands on fingerprints were sequenced. RESULTS: The results revealed a significantly lower saliva microbial diversity in cleft children and a different microbial component in both saliva and nares in children with cleft palate. A higher component similarity between the oral and nasal samples was found in the cleft group than in the control group. Lautropia species and Bacillus species were significantly less present among the saliva samples of cleft group. Dolosigranulum species and Bacillus species were significantly fewer in the nasal cavity of cleft group. Streptococcus species became much more predominant in the nasal cavity of the cleft group than in that of the control group. CONCLUSIONS: A disturbed ecological ecosystem is found in oral and nasal microbiome of children with cleft palate as a consequence of the abnormal communication between the two cavities. Further studies are needed to explore the relationship between the disturbed microbiome and diseases.

Regenerative Endodontic Treatment in Dentinogenesis Imperfecta-Induced Apical Periodontitis.

Pulp involvement of immature permanent teeth with dentinogenesis imperfecta is challenging and could lead to extraction. A case of dentinogenesis imperfecta-induced periapical periodontitis of an immature permanent tooth was treated with regenerative endodontic treatment (RET), and root maturation was observed in 12-month follow-up. An 8-year-old girl presented acute pain and swelling in central mandibular region. Clinical and radiographic examination revealed "shell teeth" appearance of teeth 31, 41, and 42. Periapical lesion of tooth 31 was observed. Tooth 41 was previously treated with apexification. RET was planned and carried out for the necrotic tooth (tooth 31) with dentinogenesis imperfecta. The 1-, 3-, 7-, and 12-month postoperative recall revealed complete healing of periapical lesions. Root maturation characterized by elongation of root, thickening of dentinal walls, and closure of root apex was observed with radiographic examinations. We show that RET could be a desirable treatment for necrotic immature permanent teeth with dentinogenesis imperfecta and lead to resolution of endodontic lesions as well as maturation of dental root. The findings of this case suggest that RET should be considered by endodontist and pediatric dentist to treat teeth with similar dental anomalies and apical periodontitis.

Transparent biodegradable composite plastic packaging film from TEMPO-oxidized cellulose nanofibers.

In this research, we develop a method to create biodegradable food packaging films. Initially, TEMPO-oxidized cellulose nanofiber (TOCNF) undergoes sonication to produce well-dispersed single-strain nanofibers. These nanofibers are then blended with waterborne polyurethane (WPU) to enhance their extensibility. To further enhance compatibility between these two components, a non-ionic surfactant, Tween 80, is introduced into the TOCNF/WPU mixture to improve the dispersion of the WPU within the blend. The addition of Tween 80 significantly increases the transparency of the resulting film (Transmittance: 89.4 %, Haze: 2.2 %). Furthermore, the incorporation of the surfactant effectively reduces the formation of wrinkles and cracks during the film drying process, preventing adverse impacts on the film's barrier properties. The thin film further undergoes esterification crosslinking with citric acid to remove its hydrophilic groups for better water vapor barrier properties. The resulting bio-based packaging film exhibits remarkable transparency, strong biodegradability, and superior gas-barrier properties (water vapor and oxygen) compared to commonly used food packaging.

Polymeric micellar nanoparticles for effective CRISPR/Cas9 genome editing in cancer.

The clustered regularly interspaced short palindromic repeat (CRISPR)-associated protein 9 (Cas9) gene editing has attracted extensive attentions in various fields, however, its clinical application is hindered by the lack of effective and safe delivery system. Herein, we reported a cationic micelle nanoparticle composed of cholesterol-modified branched small molecular PEI (PEI-CHO) and biodegradable PEG-b-polycarbonate block copolymer (PEG-PC), denoted as PEG-PC/PEI-CHO/pCas9, for the CRISPR/Cas9 delivery to realize genomic editing in cancer. Specifically, PEI-CHO condensed pCas9 into nanocomplexes, which were further encapsulated into PEG-PC nanoparticles (PEG-PC/PEI-CHO/pCas9). PEG-PC/PEI-CHO/pCas9 had a PEG shell, protecting DNA from degradation by nucleases. Enhanced cellular uptake of PEG-PC/PEI-CHO/pCas9 nanoparticles was observed as compared to that mediated by Lipo2k/pCas9 nanoparticles, thus leading to significantly elevated transfection efficiency after escaping from endosomes via the proton sponge effect of PEI. In addition, the presence of PEG shell greatly improved biocompatibility, and significantly enhanced the in vivo tumor retention of pCas9 compared to PEI-CHO/pCas9. Notably, apparent downregulation of GFP expression could be achieved both in vitro and in vivo by using PEG-PC/PEI-CHO/pCas9-sgGFP nanoparticles. Furthermore, PEG-PC/PEI-CHO/pCas9-sgMcl1 induced effective apoptosis and tumor suppression in a HeLa tumor xenograft mouse model by downregulating Mcl1 expression. This work may provide an alternative paradigm for the efficient and safe genome editing in cancer.

Skin-Inspired Tactile Sensor on Cellulose Fiber Substrates with Interfacial Microstructure for Health Monitoring and Guitar Posture Feedback.

Skin-inspired flexible tactile sensors, with interfacial microstructure, are developed on cellulose fiber substrates for subtle pressure applications. Our device is made of two cellulose fiber substrates with conductive microscale structures, which emulate the randomly distributed spinosum in between the dermis and epidermis layers of the human skin. The microstructures not only permit a higher stress concentration at the tips but also generate electrical contact points and change contact resistance between the top and bottom substrates when the pressure is applied. Meanwhile, cellulose fibers possessing viscoelastic and biocompatible properties are utilized as substrates to mimic the dermis and epidermis layers of the skin. The electrical contact resistances (ECR) are then measured to quantify the tactile information. The microstructures and the substrate properties are studied to enhance the sensors' sensitivity. A very high sensitivity (14.4 kPa-1) and fast recovery time (approx. 2.5 ms) are achieved in the subtle pressure range (approx. 0-0.05 kPa). The device can detect subtle pressures from the human body due to breathing patterns and voice activity showing its potential for healthcare. Further, the guitar strumming and chord progression of the players with different skill levels are assessed to monitor the muscle strain during guitar playing, showing its potential for posture feedback in playing guitar or another musical instrument.

The Oral Microbiome as Mediator between Oral Hygiene and Its Impact on Nasopharyngeal Carcinoma.

Oral hygiene and the alteration of the oral microbiome have been linked to nasopharyngeal carcinoma (NPC). This study aimed to investigate whether the oral microbiome plays a mediating role in the relationship between oral hygiene and NPC, and identify differential microbial taxonomies that potentially mediated this association. We conducted a case-control study that involved 218 NPC patients and 192 healthy controls. The 16S rRNA gene sequencing of the V4 region was performed to evaluate the composition of the oral microbiome. Mediation analysis was applied to explore the relationship among oral hygiene, the oral microbiome and NPC. We found that dental fillings and poor oral hygiene score were associated with increased risks of NPC (OR = 2.51 (1.52-4.25) and OR = 1.54 (1.02-2.33)). Mediation analysis indicated that dental fillings increased the risk of NPC by altering the abundance of Erysipelotrichales, Erysipelotrichaceae, Solobacterium and Leptotrichia wadei. In addition, Leptotrichia wadei also mediated the association between oral hygiene score and the risk of NPC. Our study confirmed that poor oral hygiene increased the risk of NPC, which was partly mediated by the oral microbiome. These findings might help us to understand the potential mechanism of oral hygiene influencing the risk of NPC via the microbiome.

Diaryl Urea Derivative Molecule Inhibits Cariogenic Streptococcus mutans by Affecting Exopolysaccharide Synthesis, Stress Response, and Nitrogen Metabolism.

Different small molecules have been developed to target cariogenic bacteria Streptococcus mutans. Based on target-based designing and in silico screening, a novel diaryl urea derivative, 1,3-bis[3,5-bis(trifluoromethyl)phenyl]urea (BPU), has previously been found effective in inhibiting the growth of S. mutans. However, the exact mechanism remains unclear. This current study aimed to explore the antimicrobial and antibiofilm effects of BPU on S. mutans and locate key enzymes and biological processes affected by the molecule via in silico molecular docking analysis and transcriptomic profile. Our in vitro results confirmed that BPU was capable of inhibiting planktonic growth as well as biofilm formation of S. mutans. The virtual binding analysis predicted that the molecule had strong binding potentials with vital enzymes (3AIC and 2ZID) involved in extracellular exopolysaccharide (EPS) synthesis. The predicted inhibitive binding was further confirmed by in vitro quantification of EPS, which found a decreased amount of EPS in the biofilms. The transcriptomic profile also found differential expression of genes involved in EPS synthesis. Moreover, the transcriptomic profile implied alterations in stress response and nitrogen metabolism in S. mutans treated with BPU. Examination of differentially expressed genes involved in these biological processes revealed that altered gene expression could contribute to impaired growth, biofilm formation, and competitiveness of S. mutans. In conclusion, the novel diaryl urea derivative BPU can inhibit the virulence of S. mutans by affecting different biological processes and serves as a potent anti-caries agent.

Shape-Recoverable Macroporous Nanocomposite Hydrogels Created via Ice Templating Polymerization for Noncompressible Wound Hemorrhage.

Uncontrolled hemorrhage resulting from severe trauma or surgical operations remains a challenge. It is highly important to develop functional materials to treat noncompressible wound bleeding. In this work, a shape-recoverable macroporous nanocomposite hydrogel was facilely created through ice templating polymerization. The covalently cross-linked gelatin networks provide a robust framework, while the Laponite nanoclay disperses into the three-dimensional matrix, enabling mechanical reinforcement and hemostatic functions. The resultant macroporous nanocomposite hydrogel possesses an inherent interconnected macroporous structure and rapid deformation recovery. In vitro assessments indicate that the hydrogel displays good cytocompatibility and a low hemolysis ratio. The hydrogel shows a higher coagulation potential and more erythrocyte adhesion compared to the commercial gauze and gelatin sponge. The noncompressible liver hemorrhage models also confirm its promising hemostasis performance. This strategy of combining a nano-enabled solution with ice templating polymerization displays great potential to develop appealing absorbable macroporous biomaterials for rapid hemostasis.

Non-surgical Periodontal Treatment Restored the Gut Microbiota and Intestinal Barrier in Apolipoprotein E-/- Mice With Periodontitis.

Periodontitis has been associated with a variety of systematic diseases via affecting gut microbiota. However, the influence of periodontal treatment on intestinal microbiota is not known. Hyperlipidemia can significantly alter gut microbiota structure. It is proposed that the presence of hyperlipidemia can influence the impact of periodontitis on microbiota. This study was conducted to explore the influence of periodontitis and periodontal treatment on the gut microbiota on the basis of hyperlipidemia. Apolipoprotein E-/-(ApoE-/-) mice were ligatured to induced periodontitis and non-surgical periodontal treatment was performed for half of them after 4 weeks of ligation. Microbiota communities in the feces collected at 4, 5, 8 weeks after ligation were investigated using next-generation sequencing of 16S rDNA. Bone loss at periodontitis sites were analyzed using micro-computed tomography (Micro-CT). Morphology and mucosal architecture injury of ileum tissue were observed with hematoxylin-eosin staining. The serum lipid levels were assayed. The results showed that ß-diversity index in experimental periodontitis group was differed significantly from that of the control group. Significant differences were found in ß-diversity between the non-surgical periodontal treatment group and the ligation group. The samples of the non-surgical periodontal treatment group and the control group were clustered together 4 weeks after periodontal treatment. Intestinal villus height and ratio of villus height to crypt depth was found decreased after ligation and restored after non-surgical periodontal treatment. Non-surgical periodontal treatment induced the colonization and prosper of butyrate-producing bacteria Eubacterium, which was absent/not present in the ligation group. We confirmed that periodontitis led to gut microbiota dysbiosis in mice with hyperlipidemia. Non-surgical periodontal treatment had the trend to normalize the gut microbiota and improved the intestinal mucosal barrier impaired by periodontitis in apoE-/- mice.

Fabrication of Strain Gauges via Contact Printing: A Simple Route to Healthcare Sensors Based on Cross-Linked Gold Nanoparticles.

In this study, we developed a novel and efficient process for the fabrication of resistive strain gauges for healthcare-related applications. First, 1,9-nonanedithiol cross-linked gold nanoparticle (GNP) films were prepared via layer-by-layer (LbL) spin-coating and subsequently transferred onto flexible polyimide foil by contact printing. Four-point bending tests revealed linear response characteristics with gauge factors of ∼14 for 4 nm GNPs and ∼26 for 7 nm GNPs. This dependency of strain sensitivity is attributed to the perturbation of charge carrier tunneling between neighboring GNPs, which becomes more efficient with increasing particle size. Fatigue tests revealed that the strain-resistance performance remained nearly the same after 10.000 strain/relaxation cycles. We demonstrate that these sensors are well suited to monitor muscle movements. Furthermore, we fabricated all-printed strain sensors by directly transferring cross-linked GNP films onto soft PDMS sheets equipped with interdigitated electrodes. Due to the low elastic modulus of poly(dimethylsiloxane) (PDMS), these sensors are easily deformed and, therefore, they respond sensitively to faint forces. When taped onto the skin above the radial artery, they enable the well-resolved and robust recording of pulse waves with diagnostically relevant details.

In situ tracing the process of human enamel demineralization by electrochemical impedance spectroscopy (EIS).

OBJECTIVE: The purpose of this study was to in situ characterize the demineralization (namely dissolution of hydroxyapatite) on the surface of the human enamel using electrochemical impedance spectroscopy (EIS) technology. METHODS: Fresh human third molars extracted without visible evidence of caries, were used in this study. After they were immersed in a demineralizing solution prepared from lactic acid and carboxy methyl cellulose sodium (Na-CMC) buffering at pH 4, demineralization happened on their surfaces. EIS of the specimens were measured at a series of immersed interval. X-ray diffractometer (XRD) were used to distinguish the microstructure of the surface layer of the specimens. The depositions that appeared in the demineralizing solution after 46 h immersion were analyzed by fourier transform infrared spectrometer (FTIR). RESULTS: XRD analysis revealed that the percentage of intensity (I%) of HAP gradually decreased with the elapsed immersing time, which indicated the dissolution of HAP columns of enamel. Nyquist spectra were fitted with an equivalent circuit characterized by some parameters, such as Q and R(p) (error<0.1%). Changes of the parameters' values revealed that the rate of demineralization accelerated at the forepart of the demineralization, but slowed down beyond 70 h immersion. CONCLUSIONS: The results suggested that EIS was proved to be a useful method for in situ investigating and in vivo detecting the demineralization of the enamel.

Fluoride resistance in Streptococcus mutans: a mini review.

For decades, fluoride has been used extensively as an anti-caries agent. It not only protects dental hard tissue, but also inhibits bacterial growth and metabolism. The antimicrobial action of fluoride is shown in three main aspects: the acidogenicity, acidurance, and adherence to the tooth surface. To counteract the toxic effect of fluoride, oral bacteria are able to develop resistance to fluoride through either phenotypic adaptation or genotypic changes. Strains that acquire fluoride resistance through the latter route show stable resistance and can usually resist much higher fluoride levels than the corresponding wild-type strain. This review summarizes the characteristics of fluoride-resistant strains and explores the mechanisms of fluoride resistance, in particular the recent discovery of the fluoride exporters. Since the fluoride resistance of the cariogenic bacterium Streptococcus mutans has been studied most extensively, this review mainly discusses the findings related to this species.

Foot-and-mouth disease virus infection suppresses autophagy and NF-кB antiviral responses via degradation of ATG5-ATG12 by 3Cpro.

Autophagy-related protein ATG5-ATG12 is an essential complex for the autophagophore elongation in autophagy, which has been reported to be involved in foot-and-mouth disease virus (FMDV) replication. Previous reports show that ATG5-ATG12 positively or negatively regulates type I interferon (IFN-α/ß) pathway during virus infection. In this study, we found that FMDV infection rapidly induced LC3 lipidation and GFP-LC3 subcellular redistribution at the early infection stage in PK-15 cells. Along with infection time course to 2-5 h.p.i., the levels of LC3II and ATG5-ATG12 were gradually reduced. Further study showed that ATG5-ATG12 was degraded by viral protein 3Cpro, demonstrating that FMDV suppresses autophagy along with viral protein production. Depletion of ATG5-ATG12 by siRNA knock down significantly increased the FMDV yields, whereas overexpression of ATG5-ATG12 had the opposite effects, suggesting that degradation of ATG5-ATG12 benefits virus growth. Further experiment showed that overexpression of ATG5-ATG12 positively regulated NF-кB pathway during FMDV infection, marked with promotion of IKKα/ß phosphorylation and IκBα degradation, inhibition of p65 degradation, and facilitation of p65 nuclear translocation. Meanwhile, ATG5-ATG12 also promoted the phosphorylation of TBK1 and activation of IRF3 via preventing TRAF3 degradation. The positive regulation of NF-кB and IRF3 pathway by ATG5-ATG12 resulted in enhanced expression of IFN-ß, chemokines/cytokines, and IFN stimulated genes, including anti-viral protein PKR. Altogether, above findings suggest that ATG5-ATG12 positively regulate anti-viral NF-κB and IRF3 signaling during FMDV infection, thereby limiting FMDV proliferation. FMDV has evolved mechanisms to counteract the antiviral function of ATG5-ATG12, via degradation of them by viral protein 3Cpro.

Screen printed paper-based diagnostic devices with polymeric inks.

A simple and low-cost fabrication method for paper-based diagnostic devices (PBDDs) is described in this study. Street-available polymer solutions were screen printed onto filter papers to create hydrophobic patterns for fluidic channels. In order to obtain fully functional hydrophobic patterns for fluids, the original polymer solutions were diluted with butyl acetate to yield a suitable viscosity range between 30-200 cP for complete patterning on paper. Typical pH and glucose tests with color indicators were performed on the screen printed PBDDs. Images of the PBDDs were analyzed by computers to obtain calibration curves for pH between 2 and 12 and glucose concentration ranging from 10-1000 mmol dm(-3). Detection of formaldehyde in acetone was also carried out to show the possibility of using this PBBD for analytical detection with organic solvents. An exemplar PBDD with simultaneous pH and glucose detection was also used to demonstrate the feasibility of applying this technique for realistic diagnostic applications.

Biomimetic mineralization of collagen fibrils induced by amine-terminated PAMAM dendrimers--PAMAM dendrimers for remineralization.

OBJECTIVE: Achieving biomimetic mineralization of collagen fibrils by mimicking the role of non-collagenous proteins (NCPs) with biomimetic analogs is of great interest in the fields of material science and stomatology. Amine-terminated PAMAM dendrimer (PAMAM-NH2), which possesses a highly ordered architecture and many calcium coordination sites, may be a desirable template for simulating NCPs to induce mineralization of collagen fibrils. In this study, we focused on the ability of PAMAM-NH2 to mineralize collagen fibrils. DESIGN: Type-I collagen fibrils were reconstituted over 400-mesh formvar-and-carbon-coated gold grids and treated with a third-generation PAMAM-NH2 (G3-PAMAM-NH2) solution. The treated collagen fibrils were immersed in artificial saliva for different lengths of time. The morphologies of the mineralized reconstituted type-I collagen fibrils were characterized by transmission electron microscopy. RESULTS: No obvious mineralized collagen fibrils were detected in the control group. On the contrary, collagen fibrils were heavily mineralized in the experimental group. Most importantly, intrafibrillar mineralization was achieved within the reconstituted type-I collagen fibrils. CONCLUSIONS: In this study, we successfully induced biomimetic mineralization within type-I collagen fibrils using G3-PAMAM-NH2. This strategy may serve as a potential therapeutic technique for restoring completely demineralized collagenous mineralized tissues.