RESUMO
Land-based transport from nearshore areas is a key pathway of microplastic (MP) pollution in the oceans. Therefore, transport, fate, and intervention on MPs necessitate an investigation of MP contamination in coastal regions. Here, MP pollution in the surface waters of Xiamen Bay and Jiulong River estuary was evaluated in 2021 after the outbreak of COVID-19. The abundance of MPs in Xiamen Bay ranged from 0.20 to 5.79 items m-3 with an average of 1.03 items m-3, whereas that in the Jiulong River estuary spanned from 0.55 to 2.11 items m-3 with a mean of 1.30 items m-3. A yearly decreasing trend in the abundance of MPs in surface waters in both regions was observed. The particle sizes of MPs were concentrated in the range of 2.50-5.00 mm, and the colors were mainly white, transparent, and green. The micro-Raman spectroscopic results showed that MP polymer types were predominantly polyethylene, polypropylene, and polystyrene. A lower abundance of MPs in Xiamen Bay with no obvious pattern was observed, while that in the Jiulong River estuary showed a wavelike distribution from upstream to downstream. Ecological risk assessment of MP pollution in surface waters of two regions was performed using the pollution load index (PLI), giving the risk level in descending order: wastewater discharge area > aquaculture area > sloughs > estuary mouth > estuarine rivers > shipping lane. The average risk level of Xiamen Bay (I) was lower than that in Jiulong River estuary (II). The MP pollution in the Jiulong River estuary appeared heavier than that in Xiamen Bay, which may be due to the combined effects of COVID-19 and marine governance. This study provided insights into the prevention and management of MP pollution in nearshore semi-enclosed bays.
Assuntos
COVID-19 , Poluentes Químicos da Água , Humanos , Microplásticos , Baías/química , Estuários , Plásticos , Poluentes Químicos da Água/análise , Monitoramento Ambiental , COVID-19/epidemiologia , Surtos de Doenças , ChinaRESUMO
Microplastics have raised growing awareness due to their ubiquity and menaces to coastal resilience and sustainability. The abundance, distribution, and characteristics of microplastics in water and organisms in Xiamen were evaluated. Results showed that the average abundance of microplastics in the surface water of Xiamen Bay was 1.55 ± 1.94 items/m3. The dominant color, size, shape, and polymer type were white, 1.0-2.5 mm, and fragments and lines, and polyethylene and polypropylene, respectively. The average abundance of microplastics in the fish in Xiamen was 2.44 ± 1.56 items/g wet weight. They were dominated by fibers of blue polyethersulfone and polyethylene terephthalate, and sizes <2.5 mm. There was a negative correlation between the polymer type in fish and that in water, while a positive correlation between shapes of microplastics of both fish species. Results will aid in formulating management measures for preventing microplastic pollution in Xiamen, ultimately promoting coastal resilience and sustainability of coastal communities.
Assuntos
Microplásticos , Poluentes Químicos da Água , Animais , Plásticos , Poluentes Químicos da Água/análise , Monitoramento Ambiental/métodos , Peixes , Água , ChinaRESUMO
This work investigated microplastic (MP) pollution in a commercially-important tuna species Katsuwonus pelamis (K. pelamis) from the Eastern Pacific and health implications. 125 MPs were extracted from gills, esophagus, stomachs, intestinal tracts, and muscle of K. pelamis. MPs in the esophagus was the highest, â¼7.6 times higher than that in the gill. Polyester and polyethylene terephthalate (PET) were dominant. Molecular docking implied that PET stabilized the complex via forming 4 new hydrogen bonds that interacted with Arg83, Gln246, Thr267, and Gly268, given that PET can enter glycerol kinase protein active pocket. Metabonomic results suggested that Glycerol 3-phosphate up expressed 1.66 more times that of control groups with no MPs in the muscle. This confirmed that MPs would lie in the glycerol kinase protein active pocket, which triggered menace to K. pelamis. The results provided insights into suggested the potential influence of MPs on the sustainability of fisheries and seafood safety.
Assuntos
Contaminação de Alimentos , Plásticos , Atum , Análise de Alimentos , Medição de Risco , Glicerol Quinase/química , Modelos Moleculares , Estrutura Terciária de ProteínaRESUMO
A multiparameter fiber optic biosensor for continuous determination of cholesterol and glucose was developed. This sensor was based on poly(N-isopropylacrylamide) (PNIPAAm)-immobilized glucose oxidase (GOx) complex (PIGC) and immobilized cholesterol oxidase (COD). The immobilized COD catalysis to the oxidation of cholesterol and PIGC catalysis to the oxidation of glucose could be performed at different temperatures. Therefore, the sensor could detect cholesterol and glucose continuously by changing temperature. The optimal detection conditions for glucose were achieved with pH 6.5, 30 °C, and 10 mg GOx (in 100-mg carrier), and those for cholesterol were achieved with pH 7.5, 33 °C, and 25 mg COD (in 250-mg carrier). The sensor has the cholesterol detection range of 20-250 mg/dL and the glucose detection range of 50-700 mg/dL. This biosensor has outstanding repeatability and selectivity, and the detection results of the practical samples are satisfactory.
Assuntos
Técnicas Biossensoriais/instrumentação , Colesterol Oxidase/química , Colesterol/análise , Enzimas Imobilizadas/química , Glucose Oxidase/química , Glucose/análise , Fibras Ópticas , Resinas Acrílicas/química , Aspergillus niger/enzimologia , Biocatálise , Colesterol Oxidase/metabolismo , Enzimas Imobilizadas/metabolismo , Glucose Oxidase/metabolismo , Hidrogéis/química , Oxirredução , TemperaturaRESUMO
A novel optical fiber glucose biosensor based on fluorescent carbon quantum dots (CQDs)-glucose oxidase (GOD)/cellulose acetate (CA) complex sensitive film was fabricated, in which the dip-coating method was adopted to immobilize the CQDs-GOD/CA complex sensitive film onto the end face of the optical fiber. The surface morphology, microstructure and optical performances of the sensitive film were characterized by field emission scanning electron microscope (FESEM), atomic force microscope (AFM), Zeiss Axiovert 25 inverted microscope, Fourier transform infrared spectroscopy (FTIR), Ultraviolet-visible spectrophotometer and fluorescence spectrophotometer, respectively. The developed fiber-optic biosensor exhibits high sensitivity and repeatability for continuous online detection of low concentration glucose, allowing visualization of real-time glucose fluctuations over a period of time. The change ratios in fluorescence intensity of the biosensor are linear with glucose concentration in various ranges including micromole and nanomole levels, and the relationship between relative fluorescence intensity ratio and glucose concentration complies well with the modified Stern-Volmer equation in the range of 10-200⯵mol/L with the detection limit of 6.43⯵M, and in the range of 10-100â¯nmol/L with the detection limit of 25.79â¯nM, respectively.
Assuntos
Técnicas Biossensoriais/instrumentação , Glicemia/análise , Celulose/análogos & derivados , Glucose Oxidase/química , Fibras Ópticas , Carbono/química , Celulose/química , Desenho de Equipamento , Tecnologia de Fibra Óptica/instrumentação , Fluorescência , Humanos , Limite de Detecção , Pontos Quânticos/químicaRESUMO
Spherical cellulose nanocrystals (SCNs) and rod-shaped cellulose nanocrystals (RCNs) were extracted from different cellulose materials. The two shape forms of cellulose nanocrystals (CNs) were designed with a combination of isothiocyanate (FITC), and both the obtained FITC-SCNs and FITC-RCNs exhibited high fluorescence brightness. The surfaces of SCNs and RCNs were subjected to a secondary imino group by a Schiff reaction and then covalently bonded to the isothiocyanate group of FITC through a secondary imino group to obtain fluorescent cellulose nanocrystals (FITC-CNs). The absolute ζ-potential and dispersion stability of FITC-CNs (FITC-SCNs and FITC-RCNs) were improved, which also promoted the increase in the fluorescence quantum yield. FITC-RCNs had a fluorescence quantum yield of 30.7%, and FITC-SCNs had a morphological advantage (better dispersion, etc.), resulting in a higher fluorescence quantum yield of 35.9%. Cell cytotoxicity experiments demonstrated that the process of FITC-CNs entering mouse osteoblasts (MC3T3) did not destroy the cell membrane, showing good biocompatibility. On the other hand, FITC-CNs with good dispersibility can significantly enhance poly(vinyl alcohol) (PVA) and poly(lactic acid) (PLA); their mechanical properties were improved (the highest sample reached to 243%) and their fluorescent properties were imparted. This study provides a simple surface functionalization method to produce high-luminance fluorescent materials for bioimaging, multifunctional nanoenhancement/dispersion marking, and anticounterfeiting materials.