Simultaneous exposure to nanoplastics and cadmium mitigates microalgae cellular toxicity: Insights from molecular simulation and metabolomics.

In the severe pollution area of nanoplastics (NPs) and cadmium ions (Cd2+), the joint effects of their high environmental concentrations on primary producers may differ from those of low environmental doses. Thus, we investigated the physiological changes, cell morphology, molecular dynamic simulation, phenotypic interactions, and metabolomics responses of C. pyrenoidosa to high environmental concentrations of NPs and Cd2+ after 12-d acclimation. After 12-d cultivation, mono-NPs and mono-Cd2+ reduced cell density and triggered antioxidant enzymes, extracellular polymeric substances (EPS) production, and cell aggregation to defend their unfavorable effects. Based on the molecular dynamic simulation, the chlorine atoms of the NPs and Cd2+ had charge attraction with the nitrogen and phosphorus atoms in the choline and phosphate groups in the cell membrane, thereby NPs and Cd2+ could adsorb on the cells to destroy them. In the joint exposure, NPs dominated the variations of ultrastructure and metabolomics and alleviated the toxicity of NPs and Cd2+. Due to its high environmental concentration, more NPs could compete with the microalgae for Cd2+ and thicken cell walls, diminishing the Cd2+ content and antioxidant enzymes of microalgae. NPs addition also decreased the EPS content, while the bound EPS with -CN bond was kept to detoxicate Cd2+. Metabolomics results showed that the NPs downregulated nucleotide, arachidonic acid, and tryptophan metabolisms, while the Cd2+ showed an opposite trend. Compared with their respective exposures, metabolomics results found the changes in metabolic molecules, suggesting the NPs_Cd2+ toxicity was mitigated by balancing nucleotide, arachidonic acid, tryptophan, and arginine and proline metabolisms. Consequently, this study provided new insights that simultaneous exposure to high environmental concentrations of NPs and Cd2+ mitigated microalgae cellular toxicity, which may change their fates and biogeochemical cycles in aquatic systems.

Influencing mechanisms of microplastics existence on soil heavy metals accumulated by plants.

Microplastics (MPs) and heavy metals often coexist in soil, drawing significant attention to their interactions and the potential risks of biological accumulation in the soil-plant system. This paper comprehensively reviews the factors and biochemical mechanisms that influence the uptake of heavy metals by plants, in the existence of MPs, spanning from rhizospheric soil to the processes of root absorption and transport. The paper begins by introducing the origins and current situation of soil contamination with both heavy metals and MPs. It then discusses how MPs alter the physicochemical properties of rhizospheric soil, with a focus on parameters that affect the bioavailability of heavy metals such as aggregates, pH, Eh, and soil organic carbon (SOC). The paper also examines the effect of this pollution on soil organisms and plant growth and reviews the mechanisms by which MPs affect the bioavailability and movement-transformation of heavy metals in rhizospheric soil. This examination emphasizes the roles of rhizospheric microbes, soil fauna, and root physiological metabolism. Finally, the paper outlines the research progress on the mechanisms by which MPs influence the uptake and transport of heavy metals by plant roots. Through this comprehensive review, this paper provides aims to provide environmental managers with a detailed understanding of the potential impact of the coexistence of MPs and heavy metals on the soil-plant ecosystem.

Quercetin-loaded melanin nanoparticle mediated konjac glucomannan/polycaprolactone bilayer film with dual-mode synergistic bactericidal activity for food packaging.

It is still difficult for a single antibacterial modality to realize satisfactory management of bacterial breeding in food preservation. To solve this problem, we developed a photothermal-derived dual-mode synergistic bactericidal konjac glucomannan (KGM)/polycaprolactone (PCL) bilayer film incorporated with quercetin-loaded melanin-like nanoparticles (Q@MNPs). The results showed that the mechanical properties (TS: 29.8 MPa, EAB: 43.1 %), UV shielding properties, and water resistance (WCA: 124.1°, WVP: 3.92 g mm/m2 day kPa) of KGM-Q@MNPs/PCL bilayer films were significantly improved. More importantly, KGM-Q@MNPs/PCL bilayer film presented outstanding photothermal inversion and controlled release behavior of Q triggered by near infrared (NIR) radiation, thus contributing to excellent dual-mode synergistic antibacterial properties against E. coli and S. aureus. Meanwhile, the KGM-Q@MNPs/PCL bilayer film possessed good biocompatibility and low toxicity. As a proof-of-concept application, we further verified the significant value of film for the preservation of cherry tomatoes. Since KGM-Q@MNPs/PCL bilayer film showed excellent biodegradability, this work will aid the development of sustainable antibacterial food packaging materials.

Exposure to irregular microplastic shed from baby bottles activates the ROS/NLRP3/Caspase-1 signaling pathway, causing intestinal inflammation.

Irregularly shaped microplastics (MPs) released from infant feeding bottles (PP-IFBs) may exhibit increased cytotoxicity, in contrast to the commonly studied spherical MPs. This study presents an initial analysis of the thermal-oxidative aging process of plastic shedding from feeding bottles, and investigates the inflammatory response induced by these atypical MPs in human intestinal cells (Caco-2). The PP-IFBs' surface displayed non-uniform white patches and increased roughness, revealing substantial structural alteration and shedding, especially during actions such as shaking, boiling water disinfection, and microwave heating. FT-IR and 2D-COS analyses revealed that oxygen targeted the C-H and C-C bonds of polypropylene molecular chain, producing RO· and ·OH, thereby hastening polypropylene degradation. When human intestinal cells were exposed to MPs from PP-IFBs, oxidative stress was triggered, resulting in lowered glutathione levels, augmented reactive oxygen species (ROS), and heightened lipid peroxidation. Elevated levels of pro-inflammatory cytokines (IL-6 and TNFα) signified an active inflammatory process. The inflammatory response was notably more intense when exposed to MPs released through boiling water disinfection and microwave heating treatments, primarily due to the larger quantity of MPs released and their higher proportion of smaller particles. Furthermore, the NLRP3 inflammasome was identified as critical in initiating this inflammatory chain reaction due to the mitochondrial ROS surge caused by MPs exposure. This was further validated by inhibitor studies, emphasizing the role of the ROS/NLRP3/Caspase-1/IL-1ß signaling pathway in in promoting intestinal inflammation. Therefore, swift actions are recommended to protect infants against the potential health effects of MPs exposure.

Contact versus flexure fatigue of a fiber-filled composite.

OBJECTIVE: The intent of this project was to examine the effect of two different modes of fatigue loading, contact and flexure, on the flexure strength of a dental composite. METHODS: The composite was Restolux (a fiber-filled composite) formed as bars 3 mm x 3 mm x 25 mm in size. The cyclic loading ranges were 30-50, 60-80, and 90-110 N for contact loading and 20-40 and 40-60 N for the flexure loading. Number of cycles completed was 1, 1000 or 100,000 in four different media: air, water, artificial saliva, and a 50/50 mixture of water and ethanol. Specimens were aged in sealed polyethylene containers in their respective media for 4 months at 37 degrees C. RESULTS: Statistical analysis indicated a significantly lower flexure strength for the specimens flexure loaded versus contact loaded. For the flexure loaded specimens, the number of cycles had no significant effect, but the aging, load, and the media were all significant. For the contact loaded specimens, a significant effect was observed for the media, aging, and cycles completed, but no effect for the different cycling loads. SIGNIFICANCE: In summary, the decrease in flexure strength from flexure loading was mainly affected by the aging media, whereas, the decrease from contact loading was attributed mainly to the number of cycles.

Identification of differentially expressed cDNA transcripts from a rat odontoblast cell line.

Odontoblasts and osteoblasts are two among the myriads of cell types present in the craniofacial complex. Both have a common ectomesenchymal origin and secrete macromolecules that are necessary for the formation of dentin and alveolar bone via matrix-mediated mechanisms. The mineralized matrices of bone and dentin differ in morphology and function but several mineral associated proteins, formerly thought to be tissue specific, have been found to be common in both tissues. To decipher the complex molecular mechanisms involved in mineralized dentin formation, the suppressive subtraction hybridization (SSH) approach has been used to identify the genes expressed by polarized odontoblasts. Employing SSH, 187 cDNA clones were identified from the subtracted cDNA library. Many of these genes have not been previously reported to be expressed by terminally differentiated odontoblasts. Genes were classified into seven groups based on the predicted function of the encoded proteins: extracellular matrix; cytoskeletal components, molecules involved in adhesion and cell-cell interaction; metabolic enzymes, transporters, ion channels; protein processing, protein transport and protein folding molecules; nuclear proteins (transcription factors, DNA processing enzymes); signaling molecules and genes of yet unknown function. Northern blot and in situ hybridization analysis performed for five putative novel genes and one new isoform of amelogenin revealed differential expression levels in the osteoblasts, ameloblasts and the odontoblasts of the developing rat molars. Some of the known genes isolated from this enriched pool were the cleavage products of dentin sialophosphoprotein (DSPP) namely, phosphophoryn (PP) and dentin sialoprotein (DSP). Interestingly amelogenin, ameloblastin and enamelin were also expressed in the odontoblasts during dentin formation.

Evaluation of fracture toughness of a fiber containing dental composite after flexural fatigue.

OBJECTIVE: The purpose of this study was to examine the effect of cyclic loading in four different environments on the fracture toughness of a fiber reinforced resin composite. METHODS: The specimens were 3 x 3 x 25 mm3 bars polished with 320 grit SiC paper. A 60 degrees v-notch was machined 1 mm deep at the midspan of each bar. The specimens were loaded in air, artificial saliva, water, and a 50/50 by volume mixture of ethanol and water at a frequency of 5 Hz with sinusoidal loads cycling between 10 and 20 N for 1, 1000, 10,000 and 100,000 cycles. Specimens were also aged for 4 months in each respective media. Following cyclic loading, the specimens were tested in three-point loading. Statistical analysis consisted of four 2-way ANOVAs followed by Tukey's HSD inference, and two 3-way ANOVAs followed by two-sample t-tests. RESULTS: The ANOVAs indicated no difference in the means of fracture toughness for the set numbers of cycles, but a significant difference for the aging solutions and the aging times. SIGNIFICANCE: Statistical analysis showed a significant decrease of fracture toughness from unaged to aged specimens when aged in air, saliva, and 50/50 ethanol/water. The latter showed the most pronounced decrease. The effect of the 50/50 by volume mixture of ethanol and water would appear to attack the resin matrix and/or the bond between the resin matrix and the filler, which resulted in the observed decrease in fracture toughness. In addition, the significant decrease in fracture toughness following aging is attributed to residual matrix stress around the large fiber filler particles resulting in separation of the fiber filler from the resin matrix.

Cyclic loading of notched dental composite specimens.

OBJECTIVE: The purpose of this study was to examine the fracture toughness (K(IC)) of three direct dental composites and one indirect dental composite subject to cyclic loading. METHODS: The composites were a micro-filled (Micronew, Bisco INC., Schaumburg, IL, USA), a hybrid (Renew, Bisco INC.), a nano-filled composite (Filtek Supreme Plus, 3M ESPE, St. Paul, MN, USA) and an indirect dental composite (BelleGlass HP, SDS-Kerr, Orange, CA, USA). Rectangular bar specimens (3 mm x 3 mm x 25 mm) were fabricated, notched, aged (5 months) and cyclic loaded in four different environments, air, water, artificial saliva, and a 50/50 by volume mixture of ethanol and water. Specimens were cyclic loaded for 1, 1000, 10,000, and 100,000 cycles. RESULTS: A 3-way ANOVA (non-aged and aged group, four aging media, four loading cycles) showed a significant difference between non-aged and aged, aging media, and loading cycles. For the control groups as the number of cycles increased, there were no significant differences on the number of cycles completed and fracture toughness, except for Micronew, which showed an increased specimen failure rate and decreased fracture toughness. In the aged groups, cyclic loading in water and artificial saliva did not have a significant effect on BelleGlass HP, Filtek Supreme Plus and Renew for fracture toughness and the number of cycles completed, However for Renew in the 50/50 mixture at 100,000 cycles, Filtek Supreme Plus in air and the 50/50 mixture, and Micronew, there was an increased specimen failure rate and a decreased fracture toughness during cyclic fatigue loading as the number of cycles increased. SIGNIFICANCE: BelleGlass HP displayed the best overall resistance to cyclic loading, followed by Renew and Filtek Supreme Plus, and Micronew.

Fatigue behaviour of dental composite materials.

OBJECTIVE: The intent of the project was to evaluate the fatigue behavior of particle and fiber filled dental composites that are fabricated either directly or indirectly using a notched specimen with respect to the number of cycles until failure. METHODS: The materials were five dental composites, three normally cured in the oral cavity (Restolux, Renew and Filtek Supreme), direct processing, and two laboratory produced (BelleGlass, and Tescera), indirect processing. The specimens were 3mmx3mmx25mm bars with a 0.75 or 1.0mm notch in the mid-span of the bars, polished with 320 grit SiC paper and aged for 6 months in air, distilled water, artificial saliva, and a 50/50 mixture of ethanol and distilled water. Testing was performed with a stress mean range of 5-49MPa, the maximum number of cycles was 100,000, and the number of cycles to failure was recorded. RESULTS: For the specimens that failed, BelleGlass, Restolux, and Tescera were able to withstand a higher cyclic loaded stress than Renew and Filtek. The 50/50 by volume mixture of water and ethanol resulted in the lowest resistance to fatigue for all materials. CONCLUSIONS: Of the dental composite materials investigated, the indirect processed and those with large particle fillers (higher weight percent filler) had better cyclic fatigue resistance than micro- and nano-particle fillers (lower weight percent filler).

[Establishment of two-dimensional magnetic field finite element analysis model of cup-yoke-type magnetic attachment].

OBJECTIVE: The purpose of this study was to establish two-dimensional magnetic field finite element analysis model of cup-yoke-type magnetic attachment for optmizing the design of magnetic attachments. METHODS: Because the magnetic field of cup-yoke-type magnetic attachment is stable axial-symmetrical, the authors only analyzed two-dimensional magnetic field of 1/2 section. The Maxwell stress between magnet and keeper was integral analyzed using the finite element method, and the attractive force between magnetic attachments was obtained. RESULTS: Compared the value of calculated attractive force with that of examined, the authors found that the procedure veritably reflected influencing trend of variable factors on attractive force, and the value of former one was 10% less than the later one. CONCLUSION: This procedure can be used in magnetic field calculation of cup-yoke-type magnetic attachments.